7373 wont boot after taking out mini sd and puttin...

I rencently purchased a nokia 7373 everything was ok untill i took the mini sd out. when i put it back in and turned my phone on it would start up then the screen would go white and the wallpaper would appear and a white screen again then the phone turned off completley!! i took it back got a new 7373 and the same thing happened with that!! does anyone know why and how to fix!!???? cheers.

that sux man... same thing happened to my nokia 7390 as well...
so now i just use the phone without sd card....

Similar Messages

IMac wont boot after displaying a black screen and then switching off

Help! My iMac screen suddenly went black, with a huge purple cursor and then a text box with hugely magnified text appeared momentarily and then disapeared, (the text block was just the standard "You are now connected to ...... " the name of our Network ) after some time and nothing happening I quit using the power off button, when I came back after a short while and powered up again now I cant get past the white screen with the Apple logo and the spinning disc? No start up tone either.

Yes, boot from the install disc and then use Disk Utility to repair the drive:
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.

I am planning on buying an iPad 4 16GB, So I wanted to ask that after taking out the storage consumed by the system and system apps, How much storage will I be left with?

I am planning on buying an iPad 4 16GB, So I wanted to ask that after taking out the storage consumed by the system and system apps, How much storage will I be left with?

16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
 Cheers, Tom

Wont boot after windows update

M y Sateite A305 s6916 wont boot after windows updates tried to install.

Satellite A305-S6916
tried .. every option on F8
Try this. Download a repair disc from here.
   Windows Vista Recovery Environment ISO X64 version (64 bit)
If you can reach the Recovery Environment by booting that, try the Startup Repair and let us know what happens. Sometimes you need to run it more than once.
   Startup Repair: frequently asked questions
Also try a System Restore.
   What are the system recovery options in Windows Vista?
-Jerry

DV6915nr laptop won't turn on after taking out wireless card with it on

AFter taking out my wireless card from my laptop, with it on, my computer now won't turn on at all. No lights come on in the front at all? Did I fry my motherboard?? Help please thanks

you took the wireless card out while the laptop was switched on??

HT3965 I plugged my husband's iphone into our computer after I plugged mine in and it replaced all his contacts and data with mine, how do we reverse this change?

I plugged my husband's iphone 4 into our computer after I plugged mine in and it swapped all of his data/contacts out for mine, how do we fix this?

How to use multiple iDevices with one computer

My imac desktop wont boot up there is the logo and the timer pls help

my imac desktop wont boot up there is the logo and the timer pls help

What model iMac do you have and what operating system are you running? By Timer are you referring to a progress bar?
Mac OS X: Gray screen appears during startup - Support - Apple
Resolve startup issues and perform disk ... - Support - Apple

Intel mac mini wont boot after system restore

Hi,
I ran the system restore on my intel mac mini using the genuine leopard cd that came with it.
Now it wont boot. When you press power the light comes on but it does not chime and there is not video output to any monitor.
Anyone know what could be wrong?

Welcome to Apple Discussions!
You picked 10.4.1 in your profile.
Intel Mac Minis at minimum came with 10.4.4.
If it came with a 10.5 genuine DVD, it most certainly was not running 10.4.1 or 10.4.4. Perhaps you mistook one Mac Mini install DVD for another? Does your Mac Mini have 4 USB ports on back? What does the 10.5 installer disc you used look like?

System wont boot after installing fx5600 vga crd

I have purchased a brand new msi 5600 vga card when i put it in the AGP slot the system wont boot its an Asus Mobo with p41800 my gfoce 4200ti werks fine any ideas ????
;(

Quote
Originally posted by Deathstalker
ricin,
Quote
In addition, making unsubstantiated statements as Deathstalker did that, quote "It has already been proven that 50% of all the problems relating to Vid Cards is Power Supply Related...." is not a valid argument either. If you're going to make those sort of claims, then you should back it up with firm data...
The point is, someone in the forums already did. All the forum regulars should remember when it happened too. A guy chastized us because we ask about the specs on people's power supplies. He took every post in the VGA forum to date and catagorized the solutions and found that only 50% of the problems in the forums were Power Supply Related. To me, if one out of every two problems in the VGA Forums is Power Supply Related, by asking the question, we can identify and solve 50% of the problems.
But we are used to people like yourself coming along every few months. Are you sure you did not used to log into these forums under the username of elzie?
Is this one of your old Threads:
A must read for everyone....
Richard
Yes, he does sound a bit like me doesn't he? (or vice versa). But no, we are two different people which your moderators can prove by looking at the IP addresses of both myself and elzie.
But I must admit he echo's my views. There is a definite danger that some posters who are here to help people will latch on to one supposed "solution" i.e. the PSU which is then tailored to fit all problems. Same goes for avoiding flashing the VGA BIOS especially over the Internet.
But as I've said before, 98% of system problems are software related and hardware only plays a minor role. It's a bit like a car. Without gas, you're not going anywhere regardless of all the technology that's been pumped into it. But gas can get contaminated with grit and can clog up fuel lines. So what should we do then? Change the whole car maybe? Or just replace the carburetor? After all, we don't want to risk damaging the machine by cleaning it do we?
There's just too much emphasis these days on blaming the product as the cause of the problem and replacing parts rather than taking the view that it's the user who has caused the problem himself by not following instructions when installing software. Statistics can be adapted to suit the issue too. But as I've already said, if the PSU was the main cause of failure of high end cards, the Internet would be literally littered with news about it. But there aren't any such articles, so how do you explain that?? And as Toms Hardware.com mentions here, the CPU and high end card can draw 160 watts. So it stands to reason that if you've got a 300W PSU, you've got more than enough over to run both doesn't it??
It's all very convenient to say, "replace the PSU and your troubles will be over", but if the problem persists after doing that, it won't do MSI reputation any good and the only benefit will be that a PSU manufacturer will have made a little extra profit this year.

T540p wont boot after bios update

I updated my T540p a few days ago using Lenovo Solution centre, hiwever, it cant boot after update. The power button is on and fan spins, but the screen is black. I tried: remove battery and all external device and press power button for 30 seconds, out back the battery, still screen wont show anything; tried usb recovery stick, didn't work; tried Recovery discs from Lenovo, still failed.
Please help. Thanks in advance.

Ouch. And just out of luck.
Chances are, the board is bricked.

Panic: We are hanging here... -- Wont boot after update..? Please help

Hey..
I installed this update last night, it said powerbook 15" security update. So i installed it as usual and then, worked for a bit after it was done. Then hit the shutdown button.
This morning i go to turn i on, and, It freezes, up. and Displays the following.
panic(cpu 0): Unable to find driver for this platform: "PowerBook5,4".
Latest stack backtrace for cpu 0:
Backtrace:
0x00083498 0x0008397c 0x00276EE4 ect....
Proceeding back via exception chain:
Exception state(sv=0x008c1000)
PC=0x00000000; MSR= ect ect.
Kernal Version:
Darwin Kernal Version 7.9.0:
Wed Mar 30 20:11:17 pst 2005; root:xnu-517.12.7.obj~1/RELEASE_PPC
No Debugger configured - dumping infomration
MSR=00001030
Lists the same information again
panic: We are hanging here...
It is a 15" powerbook g4. I tried taking out, / changing the ram, Booting holding S, holding shift. I cant get ti even turn on. Any help would be awesome..
Powerbook g4 1.5 15" Mac OS X (10.3.9) 2 gigs of ram

Hello may:
Welcome to Apple discussions.
Boot from your software install DVD and run repair disk from the disk utility.
Barry

System wont boot after flash

i flashed the bios the first time to upgrade to 3.6 but noticed the temps issue and wanted to revert to 3.5, now here started the problem. i downloaded the zip file from msi site, read the instructions file and since i couldnt made a boot disk for windows xp pro (tried the "make a dos startup disk" but the system wouldnt boot from it) i used the flash utility that came with live update 3. im now sure this was the biggest mistake i had ever done: i choose the A6728IMS.350 file as ROM file and it started the flash in windows (had no programs running)
after reboot the system wouldnt start
i looked at the D-Bracket and was surprised to see that it was hanging on Memory Detection Test ! so i cant use the flash recovery feature cause it wont even initialize the keyboard
any chance of recover or i can say bye bye to my bios?
P4 2.80c Ghz HT enabled no OC
MSI 865PE P series (the one with GLan, not sure of exact model)
1 Gb Kingston 400 Dual DDR (2X512 module)
Ati Radeon 9800 Pro
Be-Quiet 400 W active PFC S1.3 PSU

have you tried to do the bios recovery ?
i had this same issue when i flashed the bios when i first got this mobo.
its basically bullshit on the part of MSI, you cant flash from a floppy, it wont let you, you have to have the bios on a hard drive.
the problem with that is, that it only works for a FAT16 or FAT32 hard drive since you have to do it thru dos.
i mean is MSI thinking, how many peple with Windows XP still have FAT hard drives., luckily i do. otherwise. ggrrr.
and you cant make a start up disk ? thats pretty wierd, format the floppy and choose Copy System Files this will make it bootable.
just put the bios file you want on a regular floppy, i dont think i made mine bootable, and hold the "Bios Recovery" button,, sorry i cant recall what it is.
and i will use whatever bios you have on the floppy.
but please be sure to read the bios recovery tutorial.
i tried to flash with on of the bios's 3 times and it still wouldnt work, i had to keep going back to the original bios.
the latest bios flashes fine so i dont know i think there is something seriously wrong with the bios from ,, i think it was Aug, or Nov.
also have you tried moving the jumper on the motherboard ??? and starting the machine ? this will change all bios settings to default, and could help you.

[SOLVED] arch wont boot after triple boot experiment

Hi,
I cannot boot into arch anymore after installing ubuntu to another partition on my hard drive.
I used grub to dual boot arch and windows, but i need to use ROS and there are no working packages for arch so i tried to install ubuntu on another partition and triple boot.
Somhow my arch got broken by the ubuntu setup.
Windows still boots fine.
I already chrooted (to arch) from a live cd and reinstalled grub and did
grub-mkconfig -o /boot/grub/grub.cfg
, after that ubuntu appeared in the grub selection menu but arch still wont boot.
Arch boot hangs after checking /dev/sda6 for errors (arch partition), i cannot type or ctrl+shift+fx to another terminal
Anybody has an idea what got broken by ubuntu and how i can repair arch?
thanks!
samy
Last edited by Samy (2013-09-09 11:27:09)

Hey so i chroot again following this artikle: https://wiki.archlinux.org/index.php/Change_Root
then i did
pacman -Syyu mkinitcpio linux udev
and restarted
I tried starting arch again and it seemed to still not work, this time i gave it some more time and it actually booted.
It took very long though (more then 3 minutes or so)
in journalctl if found those lines:
Sep 09 04:20:00 meanarchy kernel: USB Video Class driver (1.1.1)
Sep 09 04:21:25 meanarchy systemd[1]: Job dev-disk-by\x2duuid-12027d8a\x2dd4b0\x2d4559\x2daa1c\x2de3ea5ca8f5bb.device/start timed out.
Sep 09 04:21:25 meanarchy systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-12027d8a\x2dd4b0\x2d4559\x2daa1c\x2de3ea5ca8f5bb.device.
Sep 09 04:21:25 meanarchy systemd[1]: Dependency failed for /dev/disk/by-uuid/12027d8a-d4b0-4559-aa1c-e3ea5ca8f5bb.
Sep 09 04:21:25 meanarchy systemd[1]: Starting Swap.
so it seems boot is searching for some disk device 1:25 minutes before it fails.
I think i know the reason: I resized the Partition of arch while installing ubuntu this changes the uuid of the partition, now something is waiting for this disk to become ready because it still has the old uuid written somwhere.
UUIDs really suck, they are not human readable and always have problems with them if i touch my partitions.
Last edited by Samy (2013-09-09 11:27:45)

My Macbook Pro wont boot after upgrading to SSD, A ? Mark on Folder appears

Hello all,
I just put in a new SSD into my mid 2012, 13" macbook pro. This is the exact SSD http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=77394 89&tab=7&SRCCODE=WEBLET03ORDER&cm_mmc=Email-_-WebletMain-_-WEBLET03ORDER-_-Deals &utm_source=EML&utm_medium=main&utm_campaign=WEBLET03ORDER&cm_lm=noahbragg@cedar ville.edu
I swapped out my optical drive and put in the SSD using this tutorial, http://www.ifixit.com/Guide/Installing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Dual +Hard+Drive/13787 Everything seemed to go fine and i had no problems. But when I tried to start up the computer it stayed on a gray screen and a foler with a question mark on it, showed up blanking. I have looked all over for the internet for the answer, I have tried to reset the PRAM but it did nothing. I then tried to select what drive i wanted to boot from by holding the option key when i booted, but when the options came up, SSD or old harddrive did not come up as a way to boot up. There were some internet options to recover but they did not work.
The SSD has nothing on it at this point, but my plan was to boot up using the original HD and then clone it over to the SSD, but ovbiously i cant even find the HD to boot to. I have seen that people are having troubles with booting to their SSD because of the new mavericks update, but i am just trying to boot to my original HD at this point.
I also considered that maybe i possibly damaged the HD cables through static electricty, but when i searched more about it i learned that i should have heard snap or felt a jolt. None of these things happened when i installed the SSD. So i beleive that the hard drive or SSD are not broken in any way.
Does anyone have any ideas or suggestions on how i can fix this? Need my computer very badly! thanks in advance.

I also forgot to mention that after the first time i tried to boot, it went to the normal screen where it wanted me to put in my apple id password. but the loading wheel was just spinning the whole time. so i turned off the computer and tried again. thats when the question mark folder came up and kept coming up everytime after that.

Imac wont boot after this last update

I downloaded an update (automatically through software update). After it installed it told me to wait for computer to restart and then hold power button until the long tone, then it should be done. I did that with no problem.
Ever since then though it wont boot regularly. It wither sits at grey screen forever OR gives me the prohibit sign. The only way to get it to work it to hold that power button until the long tone again.
Any idea whats wrong and how i fix it??
Thanks in advance for any help.

The long tone is an indication that a firmware update is installing. Do you get a progress bar at the bottom of you screen after letting the power button go?
Have you reset the PRAM? (cmdalt+PR when you restart the machine)
Also repair permissions when the machine is up and running.

7373 wont boot after taking out mini sd and puttin...

Similar Messages

Maybe you are looking for