74-409 Server Virtualization with Windows Server and System Center exam

Hello,
This is Syed Muhammad Kawish and i have successfully passed Microsoft Exam i need to have my certificate kindly assure me that when will my certificate come..I have give paper on 1st March 2014..
Regards:Syed Muhammad Kawish

Hi, Syed.
Have all your information ready, including your Prometric Candidate ID (printed on your passed exam result sheet).
Send an email to Microsoft Learning Support. As well, include a scanned copy of your passed exam. Make sure it is legible (readable) and less than 100K in size. Their email address is
[email protected]
Be sure that any email responses from them are not sent to your Spam folder. After you send them an email, you should receive a confirmation email soon afterwards that just states they received your request.
You can also contact your Microsoft Regional Service Center on the phone. Please use the following web page to find the correct contact information for help. NOTE: They may still make you send an email afterwards.
http://www.microsoft.com/learning/en-us/help.aspx.
This web page includes email and phone contact information for your geographic location so you can email or call them directly. They will help you get this figured out.
NOTE: This public forum is usually monitored by fellow IT professionals like you and me but not by Microsoft employees.
Good luck!
Best wishes, Davin Mickelson

Similar Messages

Server Virtualization with Windows Server Hyper-v and System Center Expiration

Prometric says: STATUS: Passed, EXPIRATION: 22-03-2015.
Does this means that I have to take the exam again before 22-03-2015?

Hi, Daniel.
Let me understand this exactly.
You log into http://register.prometric.com/ and then on the left side, you click
Candidate History to see your list of exam attempts.
Under the Status Expiration column, all the way to the right, it should read
Passed and the date/time you passed it. Are you sure it reads
2015 and not
2014? Is there also
another date on that same row/column for this exam's expiration below the date you passed it?
On the Prometric site, this column is supposed to display the date you passed it and optionally the date it expires for many non-Microsoft exams.
Typically for Microsoft exams, this final column will state the day you passed the exam and
not an expiration date.
As well, by passing this exam, I know that you also earned a Specialist: Server Virtualization with Windows Server Hyper-V and System Center certification title. This certification does
not expire.
Exam 74-409:
http://www.microsoft.com/learning/en-us/exam.aspx?ID=74-409
Have you looked at your MCP transcript to see if a expiration date is mentioned there? No matter what it states on the Prometric site, your transcript will describe any exam/certification expiration dates much
more accurately.
Also, I understand that the 74-nnn series exams are Microsoft partner exams. Perhaps they
do require recertification to keep up to date with the latest certifications.
If your transcript does really contain an expiration, you can contact Prometric about this and see if they can help you understand it. Here is the Prometric contact information for Microsoft exams:
https://www.prometric.com/en-us/clients/pages/contact-numbers.aspx?client=microsoft
As well, if they can't help you, you can call/email Microsoft Learning Support with information found here:
http://www.microsoft.com/learning/en-us/help.aspx.
Finally, if you want to be sure how this exam works against your employer's Microsoft partnership, you can log in and view the Partner support page here:
https://partners.microsoft.com/partnerprogram/help/en-us/whgdata/whlstt14.htm#14
I hope someone can help you get this cleared up.
Good luck!
Best wishes, Davin Mickelson

URGENT: Exam 74-409: Server Virtualization with Windows Server Hyper-V and System Center.

Hi every one,
I passed my first certification exam of Microsoft (74-409) and luckily passed the exam in 1st Attempt.and receive PASSED
Status sheet form PROMETRIC center they told me to check email within 15 days u receive ur certificate.
But What Happen . after 2 day's i receive email from Microsoft ([email protected])
Message Is below
Hello
Your goal of earning a Virtualization certification on Windows Server and System Center technologies is still within reach. Due to the popularity
of the original exam offer, the voucher you previously received is no longer valid. That does not mean that we won't offer help for you to gain your Microsoft Specialist certification for exam 74-409. Because we know that enhancing your Hyper-V expertise can
help improve your career options, we are offering a limited time offer of 50% off
74-409 exam.
Microsoft and Microsoft Learning Partners offer exam preparation resources depending on your learning goals and desired training format.
WHAT CAN I DO???????
please help any one..

Hi,
It can take more then two days to receive the mail for passing the exam, the email you received might have been a general email.
You can contect your regional Microsoft service:
http://www.microsoft.com/learning/en-us/help.aspx
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer MCSE:Server Infrastructure,
Danny van Dam
MVP, MCC

How to enable high availability on SQL Server 2005 with Windows Server 2008 Enterprise R2

Dear Folks,
I would like to ask you about this thing. I'm working for IT department for bank in Myanmar. Our bank have up to 96 branches across all of Myanmar including H.O. We are using Microsoft SQL Server 2005 with Windows Server 2008 for our banking
information system. My main problem is having to backup and restore the database backup files every time the servers in branches goes down for whatever reasons. I want to deploy this feature of high availability and failover cluster using Windows Server 2008
and SQL Server 2005. Our branches have 2 Servers. One is for Primary and other is for Backup. What I want to do is that, I want to change Backup Server to Primary Server whenever the Primary Server goes down for whatever reasons. All the working data and databases
from Primary will immediately replicated into Backup Server along with all the IP information of Primary Server. Please give me step by step guide for this process.

Try below
http://blogs.msdn.com/b/cindygross/archive/2009/10/23/checklist-for-installing-sql-server-2005-as-a-clustered-instance.aspx
I will recommend you to upgrade SQL server to newer version for support as well as flexibility.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

WebLogic Server 9 with Windows Server 2003 SP2

Hi,
DO you know if Weblogic 9 can work without any problem on a Windows Server 2003 SP2? I looked an i only find that it's supported on Windows Server 2003 SP1.
Hope you can help me
Greetings
Norberto

We are seeing alot of these - using the 'retry' option when scheduling gets the Publication to finish successfully - the log however is full of these messages.
Did you discover anything further Ranjit?
Regards,
Ferdie.

Time Machine doesn't work with Windows Server 2008

At work we use a Windows Server running with Windows Server 2008 to backup our work via Time Machine. All my collegues are running Snow Leopard appart from on that runs under Leopard because it's a G5.
A few weeks ago I installed Lion to try it before upgrading all the computer and found that time machine won't work. Apperantly I found that it is due to an AFP connection.
Can anyone tell me if I can do anything apart from trying to use another Backup Software like Data Backup?
Would really like to use Time Machine as it's SUPERB ;-)
Regards

Perhaps that drive is too small to use for Time Machine. Your Time Machine drive needs to be at least twice the size of the drive it is backing up, preferably 3 times.

Site to site VPN with windows server 2012

I am trying to connect our server to cisco site-to-site IPSec VPN with one of our partners servers, they asked us to implement the settings they gave us into our router, but actually we don't have access to the router, we are just connected directly with
our ISP. alternatively, we were informed that we can use software VPN instead, and yes we found a working one, tested and verified, but we have to pay for it to keep running.
Now my question is, having that we are running windows server 2012 R2, how can we establish this VPN connection directly from windows without the need to use third parties tools?
The only parameter that we have to connect are:
Gateway IP: xxx.xxx.xxx.xxx
Authentication Pre-shared Key: ######
Encryption: 3DES
Hash authentication: MD5
DH: Group1
No username or password is needed with this type of VPN.
Any help is appreciated.
Best regards, Abed

Hi,
You may try to configure the Windows Server 2012 (RRAS) as VPN router to connect to the 3rd party VPN server(compatible with Windows Server VPN).
Some samples just for your reference:
Checklist: Implementing a Site-to-Site Connection Design
https://technet.microsoft.com/en-us/library/ff687867(v=ws.10).aspx
TMG Configuring site-to-site VPN access
http://technet.microsoft.com/en-us/library/bb838949.aspx
More about how to deploy the RRAS on TMG please post in the TMG forum:
Forefront support forum
http://social.technet.microsoft.com/Forums/forefront/en-us/home?category=forefront
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

SAP Server upgrade from Windows 2003 and 2008 R2 with Oracle Database

Hi,
We need to upgrade upgrade our Windows servers that are running our SAP systems from Windows Server 2003 to Windows Server 2008 R2. We are using Microsoft Clustering for HA so an inplace upgrade seems not possible.
Someone has suggested to us that we will need to export our database and reimport it to achieve this upgrade however but I cannot understand why this would be necessary (we are not changing the underlying filesystem!).
Could someone please confirm whether a database export and import is required for this OS upgrade scenario? I have done a bit of research but nothing has jumped out and now I need an answer to this quickly.
We are running
- ERP 6.0 NW 7.01 (soon to be 7.02 with ABAP stack only)
- XI(PI) Java & ABAP
- SRM (Java & ABAP)
- Portal (Java only)
- PLM (Java & ABAP)
- BW (BI 7.0) (Java and ABAP)
Thank You
Felicity

Hello,
You need to go for 'Homogeneous System Copy' to achieve this, but since almost all the systems in your landscape include the Java Stack as well - so the system copy with Export/Import is to be carried out.
Even if you are not going for file system change, but it is a Windows environment and you can't put SAP up on the target Windows (windows 2008 R2) just by copying the contents and file system from source to target. You need SAPinst to create the registry and all. - On top of that you have Java stacks involved, so for java stack you can't carry out just backup/restore method to put SAP up there on target - so you need Export/import because for java stack some OS level dump is to be collected during system copy from source and it needs to be imported on target OS.
Are you clear on this one ?
Read system copy guide once and Search in OSS for the Notes to check how to upgrade from Windows 2003 to Windows 2008 R2.
Thanks

AD RMS cluster with windows server 2008 R2 and Windows Server 2012 R2

please i'm trying to add ADRMS server with windows server 2012 R2 with our ADRMS 2008 R2 cluster. and it fails with the following error:
"The Client DLL version doesn't match with the one of the servers"
so i want to know is it supported to add RMS 2012 R2 server to RMS 2008 R2 Cluster
Thanks

They can't coexist, but usually what happens is you add the 2012 server, it migrates your cluster database and then your 2008r2 servers can no longer connect.
What is this value:
DRMS_Config database
dbo.DRMS_ClusterPolicies
AdrmsFileVersion

Is ATG 9.x and 10.x compatible with Windows Server 2012?

Is ATG 9.x and 10.x compatible with Windows Server 2012?

No, its not supported. Only Window 8 is supported.
Peace
Shaik

Want to know if Internet Explorer 10 and 11 are they compatible with Windows Server 2008 32 bit?

Want to know if Internet Explorer 10 and 11 are they compatible with Windows Server 2008 32 bit?

Compare & contrast:
Internet Explorer 11 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-11-win-7
Internet Explorer 10 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-10-win-7
Internet Explorer 9 system requirements
http://windows.microsoft.com/en-us/internet-explorer/ie-system-requirements#ie=ie-9
Neither IE11 nor IE10 is supported in Vista either.
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

Designing Software-Defined Storage with Windows Server – we've got a calculator

Designing Software-Defined Storage with Windows Server – we’ve got a calculator and a doc for thatYou can use this guide and the Software-Defined Storage Design Calculator spreadsheet to design a storage solution that uses the Storage Spaces and Scale-Out File Server functionality of Windows Server2012R2 along with cost-effective servers and shared serial-attached SCSI (SAS) storage enclosures. Storage Spaces is a software-defined storage technology that enables you to virtualize storage by grouping SSDs and hard disks into storage pools and then creating high-performance and resilient virtual disks, called storage spaces, from available capacity in the pools. You can then place Cluster Shared Volumes (CSVs) and file shares on these virtual disks, which in turn host data for your workloadsDeveloped in response to direct customer...
This topic first appeared in the Spiceworks Community

Hello Marc,
Do you mean than you want everyone have their own personal share folder? And need to limit the folder size?
I think you can use the FTP server function in Windows server.
About FTP, it is recommended to ask in the Windows server forum, the professionals there will be glad to help you.
https://social.technet.microsoft.com/Forums/en-US/home?forum=winserverfiles
Thanks for your understanding.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Is J2EE compatible with Windows server 2003?

Is J2EE compatible with Windows server 2003? Whenever I try to install it says its not compatible, and the sun site only mention XP and 2000 Advanced Server.
Does anyone use J2EE on win2k3server? Which version do you use?

Which J2EE version are you trying to install and where did you download it from? J2EE 1.4 SDK should install and run on Windows 2003. At what point in installation exactly are you getting this message?

Is FoxPro9 compatible with Windows Server 2008 R2 as its operating system?

Is FoxPro9 compatible with Windows Server 2008 R2 as its operating system?

I disagree. Visual FoxPro 9.0 is compatible
withWindowsServer
2008R2. VFP datafiles can sit on WS2008R2 and VFP 9 itself can run on the server.

Connect SQL Server 2012 from Windows Server 2003 with native client 9.0

Hi,
I currently have a setup where ETL tool Ab Intio, running on a Linux server, connects to the SQL Server 2005 through a passthrough Wintel server with Windows Server 2003 OS using SQL server native client 9.0
Now I have the requirement to upgrade the SQL server from 2005 to 2012.
My question is, will it be possible to connect to SQL server 2012 through Windows Server 2003 with native client 9.0?
As per the specs, I need native client 11.0+ to fully support SQL Server 2012, but then, as per specs, native client 11.0 doesnot run on Windows server 2003. OS upgradation is currently not on the cards.
So will it be possible to the run the basic queries we use currently, if we can connect SQL server 2012 through Windows Server 2003 with native client 9.0/10.0, without updgrading the OS of the Wintel server?
Thanking you in advance!

Hi Soumya,
Yes, you can use the SQL Server Native Client shipped with SQL Server 2005 to connect to a SQL Server 2012 instance, and there is no need to upgrade the operating system.
Regards,
Mike Yin
TechNet Community Support

74-409 Server Virtualization with Windows Server and System Center exam

Similar Messages

Maybe you are looking for