745 Ultra - W2k stop Error IRQL_NOT_LESS_OR_EQUAL....please help :(

I recently brought the following:
1)AMD 1800+ CPU and heat sink fan.
2)MSI 745 Ultra (MS-6561) ATX motherboard
3)256 DDR 2700 Ram
4)300w power supply
I also have (which worked fine with the previous VIA motherboard and windows 2000 Pro):
1)Sony DVD drive (set as Secondary Master)
2)IBM DeskStar 46.1Gb 7200Rpm (Set as Primary Master)
4)AGP RivaTnt 16mb Graphics Card
5)standard 3.5" floppy drive
Note: no PCI cards are connected. Bios version 1.4
The problem is this. On setting up the new hardware and plugging all the bits in the right places I start the installation of windows 2000 Pro and it gets to the stage were it starts windows up for the first time, it then gives me a blue screen Stop error saying IRQL_NOT_LESS_OR_EQUAL. I have not seen this before and so unsure what to do to correct the problem. as I don't have any PCI cards connected what could it be?
Any thoughts would be very grateful as this is starting to annoy me something chronic espeshily after my previouse problem.
Many thanks in advance again,
Quinton.

Quote
Originally posted by wonkanoby
http://www.msi.com.tw/program/e_service/forum/index.php?threadid=14649&boardid=14&page=1#5
says agpx4 1.5v only,some tnt2 are agpx4 but many are 3.3v agpx2
There seems to be a descreponsy between the Manual for the motherboard and whats on the website. the manual tells me it is compatible with 1x/2x/4x AGP and 1.5v and 3.3v cards and yet the site tells me ONLY 4x and 1.5v.
I have ordered a new G/Card running at x4 1.5v so I'll try that tommorrow. Tonight I'll be trying to get the system running with XP and with an old 4mb PCI VGA card to see if that resolves the issue then that would conclude the motherboard manual is incorrect.
Many thanks to all your help. If you guys and any one else has any more suggestions in getting around this problem then all suggestions are welcome.
thanks again,
Quinton.

Similar Messages

I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.

I have windows 7 and every time I try to play or add a song. It says itunes has stopped working. Please help this is frustrating.

a further message box states that Data Execution Prevention has closed the program.
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

Thanks for the update and clarification. In researching the issue it seems that the 2003 error code may have something to do with the USB connection. I would use this section of one of the above articles:
Get help with iOS update and restore errors
If the USB connection between your device and computer is interrupted, you might not be able to update or restore.
To narrow down the issue, you can try different equipment:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
Solve other issues with the USB connection, then with your security software.
If you still see the error message, check for hardware issues by following the next section.
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

IMAC suddenly stops working Mouse,keyboard, wifi all stops responding. PLEASE HELP

iMAC suddenly stops working,display is on but key board and mouse does not respond.I changed keyboard with usb also but still same.even wifi stops working also.PLEASE HELP before there was some kernel panic errors , i updated every thing, installed an original osx mountain Lion. taken to Apple service center. They found nothing wrong with hard ware. But i am having still the same problems. It just stops responding to keyboard, mouse even wifi goes off some time. I thought it may be keyboard mouse problem so i changed them to normal usb keyboard and mouse but still the same. PLEASE PLEAE HELP. -------- LAST ERROR REPORT IS BELOW Interval Since Last Panic Report: 687085 sec Panics Since Last Report: 2 Anonymous UUID: 48C67BCC-4ADB-0131-8FCC-DBD9C01FBB0C Fri Jul 19 17:23:01 2013 panic(cpu 0 caller 0xffffff80096b8655): Kernel trap at 0xffffff7f8a53f351, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0x0000000000000060, CR3: 0x000000000bf36000, CR4: 0x0000000000000660 RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000000000018, RDX: 0x0000000000000004 RSP: 0xffffff8089c4ba60, RBP: 0xffffff8089c4ba80, RSI: 0x0000000000000060, RDI: 0x00000000ffffff8f R8: 0x00000000000000ff, R9: 0x0000000000000019, R10: 0xffffff8074831004, R11: 0x0000000000000008 R12: 0x0000000000000000, R13: 0xffffff807482e0ec, R14: 0x00000000ffffffff, R15: 0x0000000000000000 RFL: 0x0000000000010297, RIP: 0xffffff7f8a53f351, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0x0000000000000060, Error code: 0x0000000000000000, Fault CPU: 0x0 Backtrace (CPU 0), Frame : Return Address 0xffffff8089c4b700 : 0xffffff800961d626 0xffffff8089c4b770 : 0xffffff80096b8655 0xffffff8089c4b940 : 0xffffff80096ce17d 0xffffff8089c4b960 : 0xffffff7f8a53f351 0xffffff8089c4ba80 : 0xffffff7f8a525ff5 0xffffff8089c4bac0 : 0xffffff7f8a53a352 0xffffff8089c4bb50 : 0xffffff7f8a50da56 0xffffff8089c4bbb0 : 0xffffff7f8a4e5c36 0xffffff8089c4bbf0 : 0xffffff7f8a4e71b4 0xffffff8089c4bc20 : 0xffffff7f8a547d3c 0xffffff8089c4bc50 : 0xffffff7f8a4fad5b 0xffffff8089c4be00 : 0xffffff7f8a4f8a9e 0xffffff8089c4be40 : 0xffffff7f8a4fee0e 0xffffff8089c4be80 : 0xffffff7f8a5454df 0xffffff8089c4beb0 : 0xffffff7f8a58c82e 0xffffff8089c4bf00 : 0xffffff8009a4b1ab 0xffffff8089c4bf60 : 0xffffff800963e25e 0xffffff8089c4bfb0 : 0xffffff80096b3137 Kernel Extensions in backtrace: com.apple.driver.AirPort.Atheros40(600.72.2)[EBF8D6E8-59C6-3C1C-9549-32DDA193B1 D2]@0xffffff7f8a4ad000->0xffffff7f8a5f5fff dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f89c83000 dependency: com.apple.iokit.IO80211Family(530.4)[E86BEE31-8EE0-34BE-A53F-2571D85CC628]@0xff ffff7f8a43e000 dependency: com.apple.iokit.IONetworkingFamily(3.0)[F02560D1-ADE6-3AD9-8D05-43CB2B7C8B87]@0 xffffff7f89ddc000 BSD process name corresponding to current thread: kernel_task Mac OS version: 12E55 Kernel version: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64 Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36 Kernel slide: 0x0000000009400000 Kernel text base: 0xffffff8009600000 System model name: iMac10,1 (Mac-F2268DC8) System uptime in nanoseconds: 397672779228 last loaded kext at 256566570174: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f8b624000, size 65536) last unloaded kext at 363393284081: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f8b624000, size 57344) loaded kexts: com.apple.filesystems.smbfs 1.8.4 com.apple.driver.AudioAUUC 1.60 com.apple.driver.AppleHDA 2.3.7fc4 com.apple.driver.AppleMikeyHIDDriver 122 com.apple.driver.AGPM 100.12.87 com.apple.driver.AppleHWSensor 1.9.5d0 com.apple.driver.AppleUpstreamUserClient 3.5.10 com.apple.kext.AMDFramebuffer 8.1.2 com.apple.driver.AppleMikeyDriver 2.3.7fc4 com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0 com.apple.driver.AppleLPC 1.6.0 com.apple.driver.AppleBacklight 170.2.5 com.apple.driver.AppleMCCSControl 1.1.11 com.apple.ATIRadeonX2000 8.1.2 com.apple.iokit.IOUserEthernet 1.0.0d1 com.apple.iokit.IOBluetoothSerialManager 4.1.4f2 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.ApplePolicyControl 3.4.5 com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.4f2 com.apple.filesystems.autofs 3.0 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1 com.apple.BootCache 34 com.apple.driver.AppleIRController 320.15 com.apple.iokit.SCSITaskUserClient 3.5.5 com.apple.driver.AppleUSBCardReader 3.1.7 com.apple.driver.XsanFilter 404 com.apple.iokit.IOAHCIBlockStorage 2.3.1 com.apple.driver.AppleUSBHub 5.5.5 com.apple.driver.AppleFWOHCI 4.9.6 com.apple.driver.AirPort.Atheros40 600.72.2 com.apple.driver.AppleRTC 1.5 com.apple.driver.AppleAHCIPort 2.5.2 com.apple.nvenet 2.0.19 com.apple.driver.AppleUSBEHCI 5.5.0 com.apple.driver.AppleUSBOHCI 5.2.5 com.apple.driver.AppleEFINVRAM 1.7 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleACPIButtons 1.7 com.apple.driver.AppleSMBIOS 1.9 com.apple.driver.AppleACPIEC 1.7 com.apple.driver.AppleAPIC 1.6 com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0 com.apple.nke.applicationfirewall 4.0.39 com.apple.security.quarantine 2.1 com.apple.driver.AppleIntelCPUPowerManagement 196.0.0 com.apple.driver.DspFuncLib 2.3.7fc4 com.apple.iokit.IOAudioFamily 1.8.9fc11 com.apple.kext.OSvKernDSPLib 1.6 com.apple.driver.IOPlatformPluginLegacy 1.0.0 com.apple.driver.AppleSMBusPCI 1.0.11d0 com.apple.driver.IOPlatformPluginFamily 5.3.0d51 com.apple.driver.AppleBacklightExpert 1.0.4 com.apple.driver.AppleSMBusController 1.0.11d0 com.apple.kext.AMD4600Controller 8.1.2 com.apple.kext.AMDSupport 8.1.2 com.apple.iokit.IOSurface 86.0.4 com.apple.iokit.IOSerialFamily 10.0.6 com.apple.iokit.IOBluetoothFamily 4.1.4f2 com.apple.driver.AppleGraphicsControl 3.4.5 com.apple.iokit.IONDRVSupport 2.3.7 com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2 com.apple.kext.triggers 1.0 com.apple.iokit.IOFireWireIP 2.2.5 com.apple.driver.AppleSMC 3.1.4d2 com.apple.driver.AppleHDAController 2.3.7fc4 com.apple.iokit.IOGraphicsFamily 2.3.7 com.apple.iokit.IOHDAFamily 2.3.7fc4 com.apple.iokit.IOUSBHIDDriver 5.2.5 com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5 com.apple.iokit.IOBDStorageFamily 1.7 com.apple.iokit.IODVDStorageFamily 1.7.1 com.apple.iokit.IOCDStorageFamily 1.7.1 com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5 com.apple.iokit.IOUSBMassStorageClass 3.5.1 com.apple.driver.AppleUSBMergeNub 5.5.5 com.apple.driver.AppleUSBComposite 5.2.5 com.apple.iokit.IOAHCISerialATAPI 2.5.1 com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5 com.apple.iokit.IOUSBUserClient 5.5.5 com.apple.iokit.IOFireWireFamily 4.5.5 com.apple.iokit.IO80211Family 530.4 com.apple.iokit.IOAHCIFamily 2.3.1 com.apple.iokit.IONetworkingFamily 3.0 com.apple.iokit.IOUSBFamily 5.6.0 com.apple.driver.NVSMU 2.2.9 com.apple.driver.AppleEFIRuntime 1.7 com.apple.iokit.IOHIDFamily 1.8.1 com.apple.iokit.IOSMBusFamily 1.1 com.apple.security.sandbox 220.3 com.apple.kext.AppleMatch 1.0.0d1 com.apple.security.TMSafetyNet 7 com.apple.driver.DiskImages 345 com.apple.iokit.IOStorageFamily 1.8 com.apple.driver.AppleKeyStore 28.21 com.apple.driver.AppleACPIPlatform 1.7 com.apple.iokit.IOPCIFamily 2.7.3 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.corecrypto 1.0 Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13 Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631 Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631 AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.72.0-P2P Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports Network Service: Ethernet, Ethernet, en0 Network Service: AirPort, AirPort, en1 Serial ATA Device: Hitachi HDE721010SLA330, 1 TB Serial ATA Device: HL-DT-ST DVDRW GA11N USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2 USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2 USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 4 USB Device: USB Keyboard, 0x04f2 (Chicony Electronics Co., Ltd.), 0x0111, 0x04300000 / 3 USB Device: Microsoft Notebook Optical Mouse with Tilt Wheel, 0x045e (Microsoft Corporation), 0x00d2, 0x04100000 / 2 USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2 USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 3

That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
A stale or corrupt kernel cache
A damaged OS X installation
A fault in a peripheral device, if any
Corrupt non-volatile memory (NVRAM)
An internal hardware fault (including incompatible memory)
An obscure bug in OS X
You may already have ruled out some of these.
Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation (after erasing the startup volume) may solve a problem that isn't solved by reinstalling in place, without erasing.
Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for your model. Memory that is either slower or faster than specified may be incompatible.
The Apple Hardware Test or Apple Diagnostics, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.
In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
Connecting more than one display is another reported trigger for OS X bugs.
If your system is not fully up to date, running Software Update might get you a bug fix.
In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
If none of the above applies, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least two independent backups.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

My ipod touch burns up when it is charging or sometimes when i play games at the same time it charges. why is this and what can i do to stop it? please help!!!

HELLO! I have an Ipod Touch thats 32 gb, and its the really old one without the camera. ( im sorry i dont know which generation it is, but i bought it in 2010. ) Anyways, I've had this Ipod for almost 3 years now, and it still works pretty good. The thing im really worried about is that recently, my Ipod has started to overheat, meaning when i touch it, its almost burning. This happens when I charge it, or when I play games on it while charging the Ipod. When i remove the charger, it stops burning/overheating and goes back to normal. Why does this keep happening? Also, what can I do to stop it? please help!!!
Thankyou!

J.K. ROFLing is correct. It is normal for the iPod to get quire warm when charging and during heavy use.. If concerned make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

It says "error 7, windows error 127" Please help

It says "error 7, windows error 127" Please help

I tried that, got this error:
An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
Please help!

Can't install Adobe Flash player ERROR. Please help

I tried to download the update of Adobe Flash Player BUT every time I try to download it... Look at the screen shot. ERROR.
Please help me I am really happy if someone here can help me.

Hello,
The log file indicates there are permissions issues on a couple of files and they are not being removed. This is preventing the installation of the new version. Please run the uninstaller, posted here Uninstall Flash Player | Windows, and post an updated FlashInstall.log file, and a screenshot of the files remaining in the /Macromed/Flash directory after running the uninstaller. Please only run the uninstaller and do not attempt to re-install at this time.
Thank you.
Maria

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

Have you tried to reboot your phone(hold home and lock button simutainiously)?

Error 1001 - please Help!

I am going crazy! the software update keeps on displaying the error code 1001.
I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
please help!

I am going crazy! the software update keeps on displaying the error code 1001.
I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
please help!

My iPod is jailbroken and does not work. It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help

It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help me!

Go elsewhere. JB voids the Apple warranty and means you will get no support from Apple, including from this Apple forum.

TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

HT201210 i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

While YOU may not have attempted to jailbreak the phone, SOMEONE ELSE did. Error 1015 occurs by attempting to restore a previously jailbroken phone.
It's very likely you may NEVER get your phone out of recovery mode and your phone may be rendered permanently bricked.
Terms of Use of this forum prohibit the discussion of jailbroken phones. You'll have to scour the internet for a solution to your problem, if indeed one exists.

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP
Hp mini 110 1140el

Yes bios password, i forgot my windows password so im trying to reset to manufacturing settings but keeps asking me for bios password... Please help

Hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

hi, someone please help me out... am Nelson and got an issue with my apple Qmaster... I got OSX maverix and on my system preferences the Apple Qmaster dosent load but only gives an error, someone please help.

the error is like "Could not load Apple Qmaster preference pane"
if there is a way around it please help me coz I cannot render my video projects on Compressor anymore...

745 Ultra - W2k stop Error IRQL_NOT_LESS_OR_EQUAL....please help :(

Similar Messages

Maybe you are looking for