7510 Supernova - Memory Issues while Online!?
I just got this Nokia 7510 Supernova and have noticed from the get go that every time I access the internet, while ready to flip to page two or three, OUT OF MEMORY appears. Sometimes a few navi oks will send it away other times, the entire phone crashes and reboots. Anyone else have this problem? I have full WEBtoGO service and there are no pictures taken or songs/tunes downloaded yet as it's brand new. The phone also had to Movie Trailers on it - very nice but I moved them to my sim card and now they won't play because "THERE IS NO VALID LICENSE" What's up with that? I tried to move them back to phone memory but was unable to because there wasn't enough space!!!???
still livin in the 80's
I just got this Nokia 7510 Supernova and have noticed from the get go that every time I access the internet, while ready to flip to page two or three, OUT OF MEMORY appears. Sometimes a few navi oks will send it away other times, the entire phone crashes and reboots. Anyone else have this problem? I have full WEBtoGO service and there are no pictures taken or songs/tunes downloaded yet as it's brand new. The phone also had to Movie Trailers on it - very nice but I moved them to my sim card and now they won't play because "THERE IS NO VALID LICENSE" What's up with that? I tried to move them back to phone memory but was unable to because there wasn't enough space!!!???
still livin in the 80's
Similar Messages
-
Memory issues while fetching content
HI all,
I am using SAP KM Apis. however i am facing some memory issues while using them.
I am using getContent() api on a resource. and then getInputStream on the Icontent object. I am using a ByteArrayOutputStream for writing the data. here is the code snippet:
byte[] buf= new byte[4096];
InputStream inputStream = content.getInputStream();
ByteArrayOutputStream os = new ByteArrayOutputStream(1024)
while ((count = inputStream.read(buf)) != -1)
os.write(buf, 0, count);
byte[] arr=os.toByteArray();
THis code consuimes a lot of memory . we need to optimize this. we also tried removing BYteArrayOutputSteam and directly read the bytes in chunk :
int n;
do
n = inputStream.read(buf, 0,(int)content.getContentLength());
while (n != -1);
however this approach has not helped us.
please suggest an approach where memory consumption is less and the entire content is fed.
thanksHi
This code worked for me for reading from a KM res...
BufferedReader reader = new BufferedReader(new InputStreamReader(is));
StringBuilder sb = new StringBuilder();
String line = null;
try {
while ((line = reader.readLine()) != null) {
sb.append(line + "\n");
} catch (IOException e) {
e.printStackTrace();
} finally {
try {
is.close();
} catch (IOException e) {
e.printStackTrace();
return sb.toString();
Regards
BP -
Not enough memory issue while acquiring data
Hi all,
I am trying to acquire audio data @ 50KS/s for 20 sec. using the PXI 4498 card in the PXI system. To acquire data I am using the DAQmx functions.
Step1 : Created DAQmx channel
Step2: Set the no. of sample to read as 20X50=1000000 to the DAQmx Timing function
Step3: DAQmx Read funtion to read the data. (Set the timeout as 20x2=40Seconds)
PLease find the attached screen shot of the block diagram.
Issue is sometimes I am facing the memory issue when I run this VI. Popup saying that "Not enough memory to complete this Operation" is getting popup and the Vi getting stop abruptly. Kinldy look into the screen shot and suggest me the apprapriate method to read the data at mentioned acquisition rate.
Note: The problem is not consistent. Sometimes I am facing the error and sometimes not.
Thanks in advance
Giridhar
Attachments:
Block diagram.jpg 208 KBI think actdi is talking about loading an external database directly from the XML file using the jdbc XML driver, correct? I have not tried this yet, but am curious as to the results.
http://docs.oracle.com/cd/E17904_01/integrate.1111/e12644/appendix_xml_driver.htm#CHDFIJEH
Hope this works.
Enjoy!
Michael R. -
7210 supernova detection issue while updating soft...
i want to update my nokia 7210 supernova, bcz it doesn't start properly. therefore i can't update it while setting it powered on.
the issue is that it turns off after nokia start up tone when ever i power it on.
any help plz....
i need my phone working properly as quick as possiblethe issue is that it turns off after nokia start up tone when ever i power it on.
/t5/Pool-of-Knowledge/Recovering-from-a-failed-firmware-update/td-p/398147
jje -
Memory issues while running a yearly report
Hi,
One of my consultant is trying to run an yearly report which consumes approximately 3 GB of size. But, the memory available at that point is only 2 GB on the server. The report generates a runtime error "SYSTEM_NO_TASK_STORAGE".
But, when I restart the server, all the buffers are cleared and there is 5 GB space after which the report runs to success. The number of program swaps in ST02 are more than 3000. The swap space assigned is 400 MB.
I believe that increasing the swap space can resolve this issue. But, I would like to know any other better solutions for this.
Thanks
VijayHi,
Of course, the best solution would be to add some physical RAM on your server.
Nowadays, I would say that using less than 8 GB RAM for SAP products leeds running into problems.
In my company, we are now going full 64bit with at least 16 GB RAM...
Bythe way 400 MB for the program buffer seems very low to me. On SAP R/3 4.7 we use 1500 MB. But this just slows down the system.
You should check your extended memory setting.
Regards,
Olivier -
Out Of Memory Issue while dowloading infomraiton from DB to XML
Hi,
I am converting the Database tables into XML file format
using Java IO and SAXP. I am keeping all XML files in
download folder. But, while downloading process
i am getting Out Of Memory Error.
When i tried to download the real data, the download
folder size is going tp 50 MB and i am getting Out Of
memory error?
Is that related to JVM Memory or System Memory. What
would be the solution for this?
Awaiting your answersBy default the JVM appropriates 96Mb of memory for it's heap. You can increase the allocation by putting, say -Xmx128m on the Java command line, though perhaps a better solution is to avoid loading all your data at one time and write the XML out while reading the database.
-
Memory issues with online games
When playing online games I sometimes receive a message that I don't have enough memory to continue play or the games become so slow to respond that I restart Safari. I am wondering if there will be much difference if I replace the 256k memory for a 512k? Is there anything else I can check or try?
I upgraded my operating system thinking that it might make a difference but it really hasn't. In fact it may be even worse.
I perform the software update weekly and install everything that has to do with the actual operating system.
If anyone has any ideas, they would be greatly appreciated.
emac combo drive Mac OS X (10.2.x) 800 mhz 768 ramHi Alice
Whilst Nortons is longer installed, it was a very instrusive installation, and I have posted a link which is the step by step instruction for uninstalling Nortons, that you may wish to wade through, just to check if the many components of Nortons have been removed from the nooks and crannies of your system.
Symantec's Norton's Uninstall precedure
Also check in Disk Utility, for your Hard disk, does the S.M.A.R.T. status say verified?
However I am inclined to think it is more software than hardware. Having lots of RAM is always good but I am not sure if that really is the problem.
So make sure all that Norton's stuff is gone and when things slow down in Safari emptying all the cookies seems to rejuvinate things for me.
Also consider using Firefox as an alternative.
I wish I could have helped you more definitively.
regards roam -
Regarding Memory issues((error) while scheduling the job
Hi Friends
I am facing memory issue while rerunning BODS jobs in production.As we have rapid mart when jobs got failed i rerun the
job suddenly job got failed and in logs i found Memory issue
please help me what i have to do in steps
ThanksI think there is no one solution to buffer pool issue. Buffer pool issue happens due to many reasons like how you design the data flow, requirement of push down or even insufficient memory in the running environment.
You can check by checking 'collect statistics for optimization' during running the job. Also in the data flow, try changing from pageable cache to memory cache by right clicking and selecting properties. The below link give some details on caching, might be helpful.
https://wiki.sdn.sap.com/wiki/display/BOBJ/CachinginDI
Arun -
Memory dump while loading data
Hello,
We are facing memory issues while loading data in BW system.
This particular loading process is taking more than 4GB (3GB of EM and 1GB of heap) and still failing.
We cannot increase the memory beyond this. Can you please suggest a way to load the data ?
Runtime Errors TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time 09.03.2010 22:15:49
Error analysis
The internal table "{A:2*\TYPE=%_T00003S00000114O0000015636}" could not be
further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 1140
Number of rows: 30824
Allocated rows: 30824
Newly requested rows: 8 (in 1 blocks)
How to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 14627872
Extended memory (EM)........... 3004121016
Assigned memory (HEAP)......... 1000024976
Short area..................... " "
Paging area.................... 24576
Maximum address space.......... 4294967295
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"GP44XYX8R5ZMOGVGGMHG0U1U04O" or "GP44XYX8R5ZMOGVGGMHG0U1U04O"
"CONVERT_FROM_MEMORY"Try to load by reducing data package size.
I think you have some routine in transformation/update rule. Check that whether you are using "SELECT *" in that. It may be one reason for this error.
You can check OSS Note 396642, 379266 and 997930.
Edited by: Pravender on Mar 10, 2010 1:09 PM -
Hello All,
I am getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1.
Also, it is creating issue to convert PDF into TIFF. Please provide the solution ASAP.I am using Adobe reader XI. When i open PDF it gives "OUT of memory" error after scrolling PDF gives another alert "Insufficient data for an image". after clicking both alerts it loads full data of PDF. It is not happening with all PDFs. couple of PDFs are facing this issue. Because of this error my software is not able to print these PDFS into TIFF. My OS in window7*64. I tried it on win2012R2 and XP. Same issue is generating there.
It has become critical issue for my production. -
Question for those with memory issues on k8n neo plat
I have been having issues with my memory on the k8n neo platinum board since i built the system last month and i just recently discovered a fact I had overlooked.
I Have discovered that if i test the system while it is cool (having sat turned off overnight for example), then memtest will pass the ram just fine and the system will be stable for a short period of time, generally longer if no intensive applications are used, ie. doom3 vs. websurfing).
This system, once it heats up ( seems mostly to be the nvidia 3 nb that needs to be "hot"- that is, a probe placed in contact with the module reaches about 58+ degrees c) then the system becomes unstable and memtest, if used, fails.
Prime95, if used on it when its cool, will usually take about an hour or so to fail, but if its used on the system when its been running a bit ( temps from nb at 58c+ and memory module hot to the touch) then it fails after about 20-30 seconds.
I have placed an active hs on the nb in an attempt to correct this, but temps still remain high with failures occuring.
I have spent the better part of three days testing the sytem this way and the above facts have held true in all these tests.
I have tested at stock ratings ( not using "auto" in bios, but using "approved ratings" of 10 x 200 for fsb and timings of 2-3-3-7 for my ram at 1:1 (which is recommended as well) since i am testing for base stability at this point;Voltages have been left at auto settings, however.
I was wondering if anyone else with memory issues could try this out and post if this seems to be the case for you as well.
Perhaps the memory issues on these boards are directly related to a problem with the nvidia 3 chipset running too hot?
Does anyone have a memory issue with these boards who is using water cooling on the NB ?
Lack of issues from people using 'problem" memory, but having no failures with water cooled nb's would support my assumption.Yes i did mean chipset.
I am using a stock hs/fan from amd, which seems to run a tad hot but, considering that I wont overclock until I can get board stable, its not an issue. (runs 35-40 idle and up to 72 intensive). I need the warranty more then the extra mhz at present.
I removed the stock heatsink from the nvidia chipset and bought a generic chipset cooler (green, very little in the way of fins and seems to be aluminum) with a small fan.
I used a generic silver paste from Compusa to adhere both the cpu hs and the chipset.
I didnt lap either hs, just installed each as per instructions on artic silvers website (figured it had to go on the same way even generic).
I also bought a kingwin thermal center which i ran probes from to the cpu, case, and nb chipset.
I am not using it to adjust fans so those arent connected - its just a reference temp I can see at a glance, esp considering the funky bios reading this boards been known to give.
I assume from these responces that even a nvidia 3 250 chipset shouldnt get as hot as mine?
I asked about that from the retailer i bought this from but he seemed to think it was "ok" at 50ish celcius, but then again he didnt look too confident when he said it, lol.
Idle right now reads on Corecenter at 28 celcius for cpu and 33 celcius for the chipset, although, I have readings of 37 c and 43 c from the kingwin thermal center, which i believe to be more accurate.
My voltage reads at 11.67 for the 12v line at idle right now.
The psu i got is stick from the xblade case i bought in store. (http://www.xoxide.com/xblade2.html)
I have a dvd burner, cd drive, and two maxtor ide hd's attached to the system;The only card is the agp.
Is there a way to check and see if the cpu ispower starved? software monitor or even an external probe perhaps?
I havent put a probe on it, but the ram came in its own heatspreader, which gets very hot to the touch as well.
What temps should I be looking for on these items? -
Firefox 3.6.8 and memory issues
After the last update to 3.6.6, I disabled plugin-container per the instructions given on the forum, and my RAM problems went away. However, after the automatic update to 3.6.8, the memory problems came back, with memory usage going up to 92%. I downgraded to 3.6.4, and turned plugin-container off again; while memory usage is currently at 84%, it is not as low as it was before the upgrade to 3.6.8. (79-80%) (There is very little difference in the websites being opened on the various tabs.)
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.8ffs guys. It's a free browser. It's cool. We love it. But can we do something about memory issues? Almost every release has huge memory leaks.
How about halving the release points and focus on memory issues for the other half of the time. I am a long time user since way back in the day and it seems to me that instead of trying to release so many versions, we should be focused more fixing the current release.
I say put a moratorium on new features until bloat can be fixed. These experiences are starting to give me a hardon for IE again.
Screw new features. I can deal with plain old tabs like they are. I don't need more bells and whistles. This browser has been kicking ass and taking names for a loonnnggggg time. We don't need more bloat. Keep the security fixes coming but everything else can wait. Take a breath. Stop and smell the roses for a few weeks. -
Embedded JMS/OC4J issue while running an application in Jdeveloper 10.1.3.2
Hi,
I am facing an issue while running an application on my laptop.I downloaded Jdeveloper 10.1.3.2.Installed Jheadstart along with that.
Created a new application specified in HR demo.When I run the application I get following messages,After that it does not show my application pages.It does not even open browser window.
[waiting for the server to complete its initialization...]
Aug 29, 2007 6:01:47 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Aug 29, 2007 6:01:47 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
07/08/29 18:01:55 Oracle Containers for J2EE 10g (10.1.3.1.1) initialized
When I delete persistnce directory files under embedded oc4j (specifically jms.state), It logs following messages.But it does not run my application pages and not even open browser window to display some error.
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\jdevstudio10132\jdev\system\oracle.j2ee.10.1.3.40.66\embedded-oc4j\config>
C:jdevstudio10132\jdk\bin\javaw.exe -client -classpath C:jdevstudio10132\j2ee\home\oc4j.jar;C:jdevstudio10132\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -XX:MaxPermSize=256m -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\jdevstudio10132\jdev\system\oracle.j2ee.10.1.3.40.66\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
07/08/29 18:06:16 Oracle Containers for J2EE 10g (10.1.3.1.1) initialized.
I tried by creating another standalone application with simple html page, it throws same logs and does not show up browser window.I even tried with Jdeveloper 10.1.3.3, but still same issue .
can you please throw some light on this issue and any suggestion for resolutions.
Thanks.Can someone throw somelight on this issue?
I posted the same issue in Jdeveloper forum but did not receive any reply .appreciate your suggestions.
Thanks
Sekar. -
Hi,
I am facing an issue while running an application on my laptop.I downloaded Jdeveloper 10.1.3.2.Installed Jheadstart along with that.
Created a new application specified in HR demo.When I run the application I get following messages,After that it does not show my application pages.It does not even open browser window.
[waiting for the server to complete its initialization...]
Aug 29, 2007 6:01:47 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Aug 29, 2007 6:01:47 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
07/08/29 18:01:55 Oracle Containers for J2EE 10g (10.1.3.1.1) initialized
When I delete persistnce directory files under embedded oc4j (specifically jms.state), It logs following messages.But it does not run my application pages and not even open browser window to display some error.
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
C:\jdevstudio10132\jdev\system\oracle.j2ee.10.1.3.40.66\embedded-oc4j\config>
C:jdevstudio10132\jdk\bin\javaw.exe -client -classpath C:jdevstudio10132\j2ee\home\oc4j.jar;C:jdevstudio10132\jdev\lib\jdev-oc4j-embedded.jar -Xverify:none -XX:MaxPermSize=256m -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config C:\jdevstudio10132\jdev\system\oracle.j2ee.10.1.3.40.66\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
07/08/29 18:06:16 Oracle Containers for J2EE 10g (10.1.3.1.1) initialized.
I tried by creating another standalone application with simple html page, it throws same logs and does not show up browser window.I even tried with Jdeveloper 10.1.3.3, but still same issue .
can you please throw some light on this issue and any suggestion for resolutions.
Thanks.I am also facing the same issue on my laptop. I searched for forum but no luck.
appreciate if anybody can throw some light on this. -
IDCS4 V6.0 memory issue with preflight
When I create a custom profile for preflight and run it i encounter memory issue. Hard disk starts running indefinitely and after a while InDesign crashes. I have try, by steps, to make the profile less demanding (I should try the reverse way) but instead of crashing, indesign finally sends memory error message and can crash later. Apple Activity monitor shows that sometimes indesign requires all the memory available (1,5Go)
Any of you have ever try to set a custom preflight profile ? The basic one is really too tolerant.
Thank you.
I'am on Imac 3,06 2 GoI've spent quite a bit of time working with custom preflight profiles on my MacBook Pro, 2 Gb memory, Mac OS X 10.5.5. I have never run into a memory error. In fact, I've never ever run into a memory error in InDesign. Memory errors can occur because of defective fonts. Have you tried with different fonts? Have you tried on a different computer?
Yes, the [Basic] preflight checks only for missing fonts, missing or modified graphics, and overset text. You need to work with custom preflight profiles depending on your particular workflow.
Maybe you are looking for
-
I live in a rural area where Mobile Broadband is my only internet access. Since I have to pay $10/GB, downloads can get really expensive. Mountain Lion is 4GB and that's not even the largest thing I've had to download. Why can't Apple make a DVD a
-
How can I change the colour of an iCal calender on the iPhone?
I have two iCal calendars on my iPhone that sync to google. It works fine with push but both of hem has the same colour. That makes it hard to see the diference. How can I change the colour? I am syncing to outlook so I don't have iCal on the statona
-
Start and stop time differ from iPod to computer
I joined 2 .mp3 together using a music edtion program (the first song was 4:30 and the second one 3:40) making one long sound file. The stop time for the song in iTunes is set at 8:10. When I play the song on my iPod, it comes to a complete halt at 4
-
How do i unluck my macbookpro from Icloud?
I got my macbook pro stolen yesterday, and my first reaction was to lock it on Icloud. I didn't read the instructions before doing so but now that I read them I noticed that by locking it I won't be able to find it or wipe it. How do I unlock it?
-
I have configured OOB 4.5.1 VG with WLC 2100. NAC: CAS is located on VLAN 40 with 192.168.123.2/24 CAM is located on VLAN 60 with 192.168.199.2/24 SNMP Receiver -- community: cam_v2 WLC profile: -- V2C Read: cam_v2, V2C Read/Wri