7600GT Diamond Plus / NX7300GS-MD256EH, and the analog audio ?

Ok, I know that HDMI is meant for video AND digital audio, but I'm a little perplexed.
If I hook up the HDMI from both the mentioned VGA, and the MB has only optical out, there's no way to get the audio out..., if I use a DVI > HDMI adapter I can use the analog stereo out, but as soon as I pop out the cable from the DVI adapter and plug it in the HDMI out of the VGA, the audio is excluded from the line out...
So I MUST have an MB with coaxial spdif ?
Dunno if this is MB related, an Intel DG965WH, that has only the optical spdif.
waiting for the light...
Nik

the sad thing with the xfi is that you can hear what its trying to do but the pops and other noises you get spoil it way too much. on creatives forum there have been many posts on suggested solutions none have worked on my diamond motherboard+ the promiss of a driver fix. latest diddnt fix it.creative now say the blame is on the n force 4 motherboards though many users of other motherboards are saying they also have the same problems.not to sure what nvidia have to say but i dont hold much hope in creative fixing it. new motherboard bios might thuough.i have to say i think they are best avoided unless you can borrow one and check it works ok in your pc. ps my xfi isnt sharing any irqs but i still have sound issues.

Similar Messages

I barely bought my iphone 6 plus in october and the speaker looks white how would i clean that?

I barely bought my iphone 6 plus in october and the speaker looks white how would i clean that?

White from what? Lint? Try a small soft brush with a vacuum and see if you can gently brush it out. A vacuum will help lift the lint rather than possibly getting pushed into the phone.

7600GT Diamond plus

I am interested to buy the above product. But i notice the card does not have HDCP. Does that mean it cant play hdcp media. is it hdcp done can be supported through software??

From what I understand this particular 7600GT card is HDCP compliant, whereas the older 7600GT cards from MSI(pre "diamond plus") are not. I'm guessing thats why they made this nearly identical card to the older versions. I'm not 100% sure though.
Oh...I'll add my own questions too about the card as I'm somewhat interested in it:
Does it have full TV out functionality? (Do ALL the TV out ports work? i.e. composite / s-video / component y-pr-pb)
Does the default MSI driver work for all of the above?
Does it pass the Windows logo testing when you attempt to load a driver?
If you hook multiple TVs up to the card do the signals bleed into eachother?
Can you play a DVD on your TV with this card?
Just to check because ive had all of the above issues with my last two nvidia 7-series cards.
One more...
How does it compare to the 7900gt (my current vga) in terms of overall performance and compatibility?
Basically would this only be a slight, unnoticable "downgrade", so to say, for my games and movies?
thanks for any info
~Mike~

My Backlight for my Zen V Plus is Dimmed and the Now Playing image is burnt on the screen!!

I already tried changing the contrast! It's @ 00%! And the image isn't burnt on the screen because i left it on too long. I already thought of that and i never leave it on for more that an hour and a half at a time and i have it on the setting where if the player is left idle for fi've minutes it shuts down automatically. PLEASE HELP!!!!!!!!!!!!!!!!!!shiftone!!!!!

Kok Choy,?I have a similar problem with my Zen V Plus. I turned it on this afternoon and the screen backlight is not working. I can see that it's on (and the music plays), but the screen is so dim you can't even tell that it's on. The US Tech Support link takes you here: http://us.creative.com/support/custsup/services.asp?But the link to the email support is broken and there is no phone number. Would you let someone know?Thanks,William

K7D Master and the onboard audio.

Hello, Im new here but not new to the PC scene. I just purchased the above mentioned mobo for my game/file server and its running fantastic. But I cant get the ac97amd.inf file to install correctly. I cant get the onboard audio working at all, I install the exe installer and reboot when asked. Apon reboot the sound card still isnt installed and I cant find that inf file anywhere on the pc at all. I saw this mentioned once on these forums from doing a search but there was no clear answer as too how the person got it working.
Ill list the specs below:
2 AMD MP 2200+
1 MSI K7D Master mobo
1gb of PC2700 DDR ECC Samsung Ram
1 WD 8mb 40gb HD for the O/S
1 Maxtor 8mb 120gb for files (on promise card)
1 Maxtor 8mb 80gb HD for games (on promise card)
1 Promise ata/133 PCI controller card
1 Lite On 54x CDROM
1 GF2mx 200 video card
400w Antec PSU
So is there a trick to getting this working? I have tried the supplied driver on the cd, 1 from msi's website & 1 from amd's website w/ none of them working at all.
Any help would be greatly appreciated.

My on-board sound works fine...but i have it disabled for obvious reasons, (better audio via a sound card). I cant recall how I installed it, but it may need to be installed in a specific order like chipset then audio then whatever else...i cant remember but i know i had no problem at all installing it. Check out the manual, i know it has info on installing drivers in there.

The microphone isn't even on my keyboard on my IPhone 5 with IOS 8, and the quick audio reply isn't there either. Any help?

The microphone isn't even showing on my IPhone the quick audio reply isn't showing either, any help?

At least you have a 5.
My 4S has turned into a Frankenstein, since the 8. I WAS warned, however.
The so-called online help getting-back to 7 is ambiguous. I'm screwed (until next Feb.)

Is the 7600GT Diamond Plus really HDCP ?

Rumors says that the card is NOT HDCP Compliant, could someone clarify this please ?

Let me quote so you won't have to actually read their page at MSI. LOL
"Geforce 7600GT Chipset Features
• HDMI - High Definition Multimedia Interface Support
HDMI is a new interface standard for PCs, displays and consumer electronics devices that supports standard, enhanced and high-definition video, plus multi-channel digital audio on a single cable. It enables your PC to transmit all HDTV standards that combine HDCP-protected video at resolutions up to 1080p and 8-channel digital audio with 5 Gbps of bandwidth provided."

NX 7600GT Diamond Plus

Hey
Does anybody know which HDMI version the above mentioned card has (http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=758)?
Thanks in advance
Roy

Quote from: Svenomous on 18-October-06, 14:15:23
I think he was asking what specification the actual HDMI on the card is (such as 1.1, 1.2, 1.3 etc...).
That's correct :-) I think it's 1.2 but not sure

TS1702 I have a touch and the films , audio books, etc on my itunes account will not reinstall i have done everything possible , only music reinstalls , please help me .

The Touch I have is about 2 years old , I only update it every 3 - 4 mths , this last time I was unable to reinstall my audio books and films that had been purchased through my itunes account , i have even cleared my touch and reinstalled still no luck with the films and books, look forward to recieveing help .

Put it in Recovery Mode. If your computer won't recognize your iPod, try another one. How did you wiped the iPod? With iTunes or directly with the settings app?

Latency and the M-Audio mobilpre USB

I know its like an overworked subject but I have searched and gotten no real answer.
small but realy annoying amount of latency makes doing overdubs and such a real confusing thing. (aka-beotch).
playback always lagging just a little behind new input(mic or instr).
I have an M-Audio mobilpre USB and am having unacceptable latency probs.
everything as suggested has been done.
GB-Mobilepre-up to latest rev-driver etc...
last try was all monitors off-only 1 track-optimized buffer for speed.
I have a 1.2gig pros-1.62gig ram on a g4.
could it be that its just the fact of USB as opposed to firewire?
any guesses?
thanx
cheers,
matt
g4-1.2gig proc-lots of HD and mem Mac OS X (10.3.8)
g4-1.2gig proc-lots of HD and mem Mac OS X (10.3.8)

"be you USB or be you fire wire"
I am using a simple setup:
Small unpowered mixer connected to my iBook via iMic. (USB 2 connection)
For MIDI: I have a Keystation 49e (direct USB) and a Yamaha PSR 520 connected via MIDIMAN usb 1x1.
I do not plug my headphones into the iMic because the latency was noticeable. I only use the iMic for input. I plug the headphones into my headphone jack and turn on monitoring in each track I am recording live. The latency is barely, barely noticeable.
You have an even better option via zero latency monitoring. If you can't get past the latency then you will have to monitor using the Mobile Pre. See your manual for details.
I believe my performance (including latency time) has improved since running the sessions from my firewire external drive. My drive is a Lacie 160GB, 7200rpm, 8M cache firewire drive. In addition to freeing up memory on the hardrive on my iBook, the faster spinning drive seems to boost my performance as well.
In a recent session a bass guitarist noticed annoying latency. I realized I had a cpu intensive plugin enabled. Turning the effect off removed the latency problem.
While running Garageband make sure no other tasks are running, such as indexing. File vault is also a performance killer and I finally turned it off.
More suggestions here:
GarageBand 2 Help: Optimizing GarageBand performance
Kurt

NX7600GT Diamond Plus Questions

Hey Everyone,
My questions today are about the NX7600GT Diamond Plus video card. I am thinking about building a Home Theater PC and I was looking at the MSI 7600GT Diamond Plus card, because of the HDMI port. Does this port besides carrying video carry sound as well? if so what kind is it, 2 CH, Digital, etc.? If it doesn't any recommends on cards that will carry very good sound quality out? Also, are there any benefits to having two of these cards instead of one, other then having two 7600 GTs for playing games? Finally, if I play a DVD on my computer(which is encrypted) and run the HDMI cable from the card to a DVD player/recorder, will I be able to record the movie or will copyright bs problems occur? Sry for all the noob questions, but I am new to the HTPC arena.
Thanks

Hello
I currently own this card and might be able to answer your questions.
This card will send digital S/PDIF sound through the hdmi port if your motherboard or sound card has spdif cababilities. This can be done one of two ways. Option A: If you have an internal header off of your mobo/soundcard you can use the supplied internal spdif cable. Option B: If you don't have an internal header (I don't and use this method) you can use the supplied RCA pass-through cable conecting the RCA end to your spdif out and the other end to the VGA. Aside from being able to SLI them and increase the performance of some programs there is no advantage to having two as you will only be able to use the ports on one.
I'm not entirely sure about being able to copy a movie. I wasn't aware that there were any DVD recorders with HDMI inputs on the market. If you have a standard definition DVD (not Blue-ray or HD-DVD) you probably shouldn't run into any copyright problems. However I've found that many DVDs will refuse to play on my computer if a TV out port is activated, you may or may not run into this with the HDMI port. This isn't card specific, from talking with tech support this is apparently present on all nvidia 7-series cards.
Overall I was really impressed with how this card handled the digital sound, but was not impressed with the quality of the HDMI video signal. The signal was being overscanned, and looked horrible in comparison to the analogue signal from my card. This is really no surprise considering this is the first ever HDMI card. Theres always going to be bugs at first. If you're planning on building an HTPC I would suggest using the plain old RGB (15 pin analogue) if your HDTV has the input (most do). You won't run into any DRM restrictions using this method and the quality difference (versus DVI) is hardly, if at all, noticable on today's HDTVs and projectors.

NX7600GT Diamond Plus and fan speed with Dual Core Center

I just got a NX 7600GT Diamond Plus for my HTPC. I noted that Riva Tuner and other utilities are not able to control the fan speed of the video card. The only way one can control the fan speed is via Dual Core Center and 3D Core Cell. The problem is that the default setting for fan speed on Dual Core Center is too high and clearly audible. How can I get Dual Core Center to start with user defined presets during windows start-up/boot-up ?
What I want to do is to put the fan into 'SILENT' mode automatically during Dual Core Center start-up. Any ideas / suggestions ?

Quote from: BOSSKILLER on 17-January-07, 00:44:11
well no need to edit manually, MSI provided everythink in easy way from core center.
select advanced mode, create your custom profile pickup your desired settings,(setup maximum FAN RPM via buttons) and save it to custom profile.
suggest you to read help section from program.
So the custom profile is automatically loaded every time DualCoreCenter starts up ? Maybe there is something wrong with my install of DCC, I cannot get it to load custom profiles automatically upon startup. I can save the changes to say "User Profile 1" but the profile active on startup always is the "default" profile ...

2 'problems' with the K8N Diamond Plus

Hi there.
I just bought a K8N Diamond Plus and I'm having some troubles installing my system in conjunction to my Decklink Extreme PCI-E ( http://www.decklink.com/products/sd/ ).
Here's my configuration:
MSI K8N Diamond Plus
AMD64 X2 4400+
ROSEWILL 6600GT PCI-E VGA
Decklink Extreme PCI-E
2GB RAM ( 2 x 1gb) Kingston
OCZ-520 12U Modstream Power Supply
plus 6 HD's (7200rpm) and 1 DVD-+RW
The problem is, when I try to initialize the system with the Decklink, which it's a PCI-E 1x, it just don't boot. Neither putting the Decklink on the 1x, nor in the 4x slot and nor in the 16x.
The Decklink is working just fine in another system and doesn't seem to be a problem with this card.
I wondered if there's any limitation in the K8N Diamond Plus with working with the ROSEWILL 6600GT PCI-E VGA plus the Decklink.
=======================
The other thig is that when I take off the Decklink, the system boots normaly but a message appears while booting: "Not enough space to copy PCI option ROM 00:13:00".
And I don't have a clue about what's going on.
=======================
Please enlighten me with this questions if possible.
Thank you very much.
Greets.
Igor Bineli

Remove the battery away for 10 minutes, clear CMOS, start the system to load setup/optimized defauts in bios setup. After that, disable all onboard items in bios setup that you won't to use. Save and exit.
Plug ROSEWILL 6600GT PCI-E VGA card, and start your system to check if there is the error message. If there is, borrow another brand VGA card to do a test.
Besides, update your MB bios and driver version to the latest one.

Dual Audio Outs? / HDMI and RCA Analog at the same time?

I am trying to figure out if the Apple TV supports dual audio output. My Onkyo receiver supports dual-room/dual-source audio (powered and line-level stereo audio output for 2nd room). The problem is it can only accept an analog source for the second room.
I know that HDMI takes precedence over component video connections if both are connected.
Will the ATV send audio signal out of the HDMI and RCA Analog jacks at the same time so I can enjoy streaming music is two rooms simultaneously?

Iowabeerguy wrote:
I like to be a helpful soul, so I decided to pull the owner's manual from Onkyo and take a look at the receiver, without ever thinking about the model number, and come to find out, I have my Apple TV hooked into an Onkyo TX-SR606.
I appreciate that!
Iowabeerguy wrote:
Problem is, I have the HDMI into the Onkyo and the analog outs going to to another stereo receiver for the outdoor speakers. Both work at the same time, which means that the Apple TV will output both digital and analog at the same time.
Good to know.
Iowabeerguy wrote:
Now, let's look at the receiver - if you have the HDMI plugged into the - say DVD input, and it's playing through the main system, and you plug the analog outputs into the DVD analog in on the receiver, the Zone 2 out will automatically look at the HDMI input, and not put out anything to the Zone 2 outs, because it won't pass digital to the Zone 2 outs.
Oh yeah, that makes sense!
Iowabeerguy wrote:
I can't try it tonight, but I think if you plug the analog outputs from the Apple TV to an input that isn't assigned to an HDMI in, (like CD) and then set the Zone 2 amp to play that source, it should work.
I've set aside some "tinkering" time this weekend to try that. I'll let you know if it works; I think it will. Thanks again!

Diamond plus and dDDR2

Will the Diamond Plus support DDR2 for the new AMD XP2 processors?

limpet,
I forgot to give you the supported RAM list:
Diamond Plus Supported Memory
Richard

7600GT Diamond Plus / NX7300GS-MD256EH, and the analog audio ?

Similar Messages

Maybe you are looking for