7606: Module for SPA-2X1GE-V2 Card

Greetings-
My company purchased a SPA-2X1GE-V2 card to be used on our 7606 router. The 7606 has a '2 port adapter Enhanced FlexWAN' module (WS-X6582-2PA). I tried installing the card into the module and it doesn't seem to fit. I take it that these two are not compatible. I tried looking through the 2SPA-2X1GE-V2 data sheet and can't find what this card works with, besides the fact that it's compatible with a 7606. Can someone assist me with figuring-out which module will work with the 2SPA-2x1GE-V2?
Thanks in advance!

I believe your module makes use of the port adapters from the old 7204/7206(VXR) routers. What you need seems to be a SIP-400:
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76intsw.html

Similar Messages

Problem inserting module for my dvb-s2 card on any kernel after 2.6.35

Firstly these drivers contain some proprietary bits so I have to download them from here. Basically it's some modified version of the cx23885 module from the mainline kernel.
Secondly here is a 10 page discussion on the TBS forums about this driver and getting it to work with kernels after 2.6.35.
Card is TBS 6891.
These proprietary drivers seem to be working with other distros such as Fedora and Ubuntu as witnessed in the previously linked thread, but, for some reason when I try and insert the module on my Arch Linux x86_64 box I get the following error.
# modprobe cx23885
FATAL: Error inserting cx23885 (/lib/modules/2.6.38-ARCH/kernel/drivers/media/video/cx23885/cx23885.ko): Unknown symbol in module, or unknown parameter (see dmesg)
# dmesg|tail -n1
[ 2373.648484] cx23885: Unknown symbol v4l2_i2c_new_subdev_cfg (err 0)
So I was wondering if anyone might be able to help with this. Maybe Fedora or Ubuntu have kernel config options different to Arch that I could try. Or kernel/v4l patches I could try.
Last edited by frontwheelskid (2011-06-08 10:48:01)

"cody" has replied in the tbs forums with information to get this compiled and working with arch linux:
it seems though on ArchLinux you need to do one extra step before 'make install':
# rm -rf /lib/modules/<kernel_version>/kernel/drivers/media/
for example:
# rm -rf /lib/modules/2.6.39-ARCH/kernel/drivers/media/
because otherwise the existing V4L modules in ArchLinux mixed up in a wrong way with the one installed by TBS Linux driver package.
I hope this info shortens other peoples searches!
Ali.

Oes the GLC-SX-MM, SFP transceiver work in SPA-5X1GE-V2 card?

The compatibility matrix for SPA-5X1GE-V2 card indicate that the SFP compatible is SFP-GE-S. We already have GLC-SX-MM SFP transceivers. Could this transceiver works in SPA card without problems?
Thanks
Jorge Ibarra Luna
[email protected]

Hi,
It will work, but it is not TAC supported.
HTH,
jerry

Function Module for Discover Credit Card

We have Payment Credit Card types set up in the SAP system as American Express, Master Card and Visa Card. These use the following Function Modules CCARD_CHECK_AMEX, CCARD_CHECK_MC and CCARD_CHECK_VISA respectively.
We want to add Discover Credit Card. Does anybody know how to create a Function Module for it, or where do I get the specifications for the sme?
Please advice.
Thank You.

Hello Sujeet,
have a look at http://en.wikipedia.org/wiki/Credit_card for the checksum of Credit Card's. I think this function is implemented in CCARD_CHECK_LUHN_MOD_TEN. I think you should try to copy CCARD_CHECK_VISA to Z_CCARD_CHECK_DISCOVER and adapt this module to your needs.
Regards
Gregor

Trunk card and DSP module for AS5350XM

I have bought Cisco AS5350XM Voice (PVDM2) High-Density (AS535XM-2T1-V-HC).
There are 2T1 port and two 64-channel DSP modules
My application server uses only G.711(64k) via LAN to talk to AS5350 for inbound IVR calls. If 2T1 is used to full capacity, there should be 82 DSP channels available.
Could I just buy a trunk card (AS535-DFC-4CT1) and use only 3T1 without having to add extra DSP modules?

Try this link for more information on cards
http://www.cisco.com/en/US/products/hw/univgate/ps501/products_white_paper0900aecd801f92c1.shtml

SIP-400 SPA-2X1GE

Does SPA interface (SPA-2X1GE) support DWDM SFP? What is maximum number of SPA-2x1GE in one SIP-400 module? Does OSM-4G and 7600-ES20 module support DWDM SFP. What is difference between those cards if we talk about this card as core-facing card, and which card is best solution for core-facing.

Cisco XR 12000 Series SPA Interface Processor 10G 12000-SIP-600 support DWDM.
SPA-2X1GE
SPA-1XOC12-ATM
SPA-8XCHT1/E1

Can configure layer 2 interface at 7600+rsp720+sip400+SPA-2X1GE-V2

HI guys：
SPA-2X1GE-V2 module interface can work L2 switchport？Thank's
same：
interface GigabitEthernet5/1/1
switchport
switchport access vlan 20
switchport mode access

Hi there,
no the SIP400 cannot be configured as L2 switchport (it does not make any difference which SPA you actually use).
However you can have multipoint Layer 2 bridging service by using bridge-domain under service instance configuration (EVC)
something like:
interface GigabitEthernet5/1/1
service instance 1 ethernet
encapsulation dot1q 20
bridge-domain 20
Internally one bridge-domain is mapped to one of the 4K global VLAN resource; meaning that you still need a SVI for the L3 termination.
i.e:
Interfaca vlan 20
ip address 10.0.0.0 255.255.255.0
regards,
Riccardo

What is the Supported wifi module for hp dv6-6154tx

What is the supported wifi module part number of wifi card number for hp dv6-6154tx . I lost it somewhere when I tried to add thermal compound on processor. Help me plz

Hi,
These are the part numbers of the wireless card which are suitable for your unit from the below link.
http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf
Look for page # 67.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Is Bluetooth module for Mac Pro/iMac compatible with FW800 MDD?

I've been looking at fitting an internal Apple Bluetooth module in my FW800 MDD G4, and I've noticed the later modules for Intel Macs appear to have the same form factor. The connection to the logic board looks identical, as do the mounting holes. The only physical difference seems to be where the BT antenna connects (below on the original G4 card, above on the later modules).
Has anyone tried fitting one with success?

if you got the guts, shove it in there. think the issue you will have is the original machines supported the 1.1 cards, the card you speak of is 2.0

I'm looking for a PCI UMTS card for Portege M700

First of all Hi everybody, as above mentioned in the title is about the Portege M700, I'm looking for a PCI UMTS card for this model have here a 8775 Sierra lying around, but this is unfortunately not recognized in Win7, I can times someone may say what card for this laptop is, or even something where I could get so ...???
Thanks apologize in advance

Hi
You need a 3G broadband module?
As far as I know some of the M700 Portege series have been equipped with the 3G module I think its from Novatel but Im not quit sure
However, if you need an part for the Toshiba notebook which would be compatible for sure, then the best place for buying such part is your ASP.
The guys could check what parts are compatible and could order it from Toshiba if this would be really necessary
Greets

BAPI for handling BP payment cards

Hallo,
I'd like to create payment cards for business partners in a remote system but can't find a bapi for this. Does anyone know if such a bapi exists (I already checked the transaction BAPI but could not find anything that seemed to be what I want).
Kind regards
Roman

Look at this forum query. Perhaps you might find it useful.
Function Module for Discover Credit Card
Regards,
Subramanian V.

Is Ardence RTX required when I use PCI-7831R with labview real-time module for RTX target

I am new in the labview real-time field. I want to use labview real-time module for RTX target on only one desktop. My card is PCI-78331R. Is Ardence RTX necessary? Why I cannot find my card in the MAX after I configured the RTX?
Thank you very much.

Hi Ziaozhongda,
You must have the RTX runtime engine installed before the LabVIEW Real-Time RTX module will install. Additionally, you should follow the instructions in the "Using the NI PCI-7831R with the LabVIEW Real-Time Module for RTX" section of Getting Started with the NI 7831R (page 8).
Please see Configuring Hardware for Use with RTX.
Also useful is "How Can I Validate That My PC Will Run RTX?

[solved] catalyst: Building fglrx module for 3.0-ARCH failing

I'm running Arch on my laptop since some time now.
Lately I've done some updates and encountered a problem with my ati (catalyst driver).
Everytime the auto-build module tries to compile, I'm getting an error:
$ sudo catalyst_build_module allg
Building fglrx module for 3.0-ARCH kernel ...
Failed!!! Check out log: /var/log/catalyst-install.log
this is what gets logged:
2011-08-29 15:52:07
Building fglrx module for 3.0-ARCH kernel ...
Kernel header files are absent: directory /lib/modules/3.0-ARCH/build doesn't exist! Game over
I checked it and that build directory is obviously really missing.
I appreciate any help from you guys, since it's really odd to work on this laptop without the correct graphics drivers..
this is my video card:
# lspci -v | grep "VGA"
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series] (prog-if 00 [VGA controller])
please let me know if you need more information and thanks in advance for your help!
Last edited by derblub (2011-08-29 16:39:22)

well, ok - this was too oblivious now
thank you very much!

DRM for 3d on savage cards, please!

I've read about 12 different conflicting articles on how to enable dri on a prosavage DDR, and none work.
I have rebuilt xorg and mesa, installed the drm packages and still error out when modprobing the driver modules.
Help please!

I think this is the wrong forum, bud...
As for DRI on Savage cards, that is borderline impossible. And if you can get it working, you won't get much of a performance boost.

Which bluetooth module for iMac 17" 1.8Ghz

I am trying to decide between two bluetooth modules for a 17" 1.8Ghz iMac. So far I have found part number 922-6201 and 922-6530. They look similar but I have been unable to find any explicit documentation that mentions the correct part.
Can anyone help me out?
JT
Also feel free to reach me on ichat: jasontm1

According to the information here those part numbers are interchangeable and are really the same card.
It is really odd that on that page it states:
Description
Add BlueTooth to your iMac G5 17" & 20" Mac with this Apple part.
But then does not include any iMac G5 in the compatibility information:
Compatibility
Power Mac G5, eMac (USB 2.0), iMac (17-inch Flat Panel, 1GHz), iMac (USB 2.0), Power Mac G4 (FW 800), Power Mac G5 (June 2004), Power Mac G5 (June 2004), Power Mac G5 (Late 2004), Mac mini**.

7606: Module for SPA-2X1GE-V2 Card

Similar Messages

Maybe you are looking for