760GM-p23 (FX) problem due firmware upgrade H60 [SOLVED!]

Hi there!
We use the motherboard 760GM-p23(FX) which is shipped with the default firmware revision H30.
The recent firmware now online is H90 and is fixing a lot of issues.
But if we upgrading to H90 the SATA devices totally disappears and there is no boot device avaible anymore
We have been downgrade to ROM version H30.
And then we went up in small steps.
However, from version H60 the same (disappear) problem appeared again.
We see a correlation with the "2.2 infinity" (2.2 TB HDD improvement) which is introduced in firmware H60 or higher versions.
Question: Is this a common problem or we do something wrong?
Hardware used in the issue:
Motherboard:760GM-p23(FX)
Processor: AMD FX-6100
RAM: 2x 4GB Corsair Value select CMV4GX3M1A1333C9 (Dual channel)
SSD: Mushkin SATA Chronos 60GB (MKNSSDCR60GB)
CD/DVD: Philips Generic DVD station
Thanks in advance from the Netherlands.

Problem Solved
How: Just switching the SATA connector to another port (1), reboot (2) & enter the BIOS (3).
Works with version H60,H70,H80 and H90 the devices will be visible again.
Strange..strange.. but it "fixed" the "dissapear" problem.
Cheers from the Netherlands

Similar Messages

WRT610N problems after firmware upgrade to 1.00.03.15

I've been using my WRT610N (hardware version 1) for years running firmware version 1.00.00.18.
I always used the 5Ghz SSID from laptops, iPad and iPhone and never bothered about the 2.4Ghz SSID.
Due to more frequent "cannot connect to <5Ghz SSID>" problems recently I decided to upgrade to the latest firmware version (1.00.03.15). Immediately since this firmware upgrade, the 5Ghz SSID is invisible to all devices except (strangely) my iPad. All other devices see only the 2.4 Ghz SSID.
I've tried switching channels etc. but to no avail.
Clearly, the firmware upgrade is the only thing here that changed but I'm at a loss to get the 5Ghz SSID back into action.
Anyone has an idea what's wrong here? The only remedy I can think of is to revert back to the old firmware version but somehow that feels wrong.
Thanks in advance,
Rob V.

rverscho wrote:
I've been using my WRT610N (hardware version 1) for years running firmware version 1.00.00.18.
I always used the 5Ghz SSID from laptops, iPad and iPhone and never bothered about the 2.4Ghz SSID.
Due to more frequent "cannot connect to <5Ghz SSID>" problems recently I decided to upgrade to the latest firmware version (1.00.03.15). Immediately since this firmware upgrade, the 5Ghz SSID is invisible to all devices except (strangely) my iPad. All other devices see only the 2.4 Ghz SSID.
I've tried switching channels etc. but to no avail.
Clearly, the firmware upgrade is the only thing here that changed but I'm at a loss to get the 5Ghz SSID back into action.
Anyone has an idea what's wrong here? The only remedy I can think of is to revert back to the old firmware version but somehow that feels wrong.
Thanks in advance,
Rob V.
Try setting 5GHz network as "Wireless-N only" instead of MIXED. That should help resolve this issue.

E66 GPS problem after firmware upgrade to v.500

hi there, sorry but im going crazy with this problem....
id like to know who has a nokia e66, performed the v.500 upgrade and has GPS that doesn't work anymore after doing the upgrade, am i the only one?? what did the new upgrade changed? how to fix this??? i did all i could think of.. format memory card, reset phone, reinstall firmware etc etc. before upgrade it was working like a charm, getting signal fast and all. tried to enable and disable a-positioning, etc etc, resetted, removed battery etc etc.... and i upgraded the firmware with Nokia Ovi Suite for the note.. so the "good" stuff.
gabrio

famous007 wrote:
Hi I am also having the same problem. I upgraded my firmware to version 500.21.009 and my gps is not working. Anyone has a solution to this problem. Will the latest firmware upgrade resolve this issue?
@famous007
Presumably you have this version of Ovi Maps installed upon your E66:http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download#/nokia-e66/
If you go to Menu > Tools > Settings > General > Positioning > Positioning methods - try temporarily disabling all except Integrated GPS, go outside away from tall buildings if feasible launch Ovi Maps and wait 20 - 30 minutes for first positional fix to be established.
Happy to have helped forum with a Support Ratio = 42.5

Nokia 5800 XM: Problems after firmware upgrade

Hello all,
I upgraded my firmware to V 50.0.005, cause that's what Ovi store told me to do in order to download ovi maps.
However, now, when I open my internet browser it automatically opens full screen which is really not my preference. But when I click "options" it just shuts down.
Also when I enter Ovi store now, at first it seems fine but after loading an app page it crashes saying no more than "Something went wrong".
Thanks in advance for your help.

Hello, I'm afraid I don't have an anser to this, but I too appear to have the same problem. After upgrading to v 50.0.005 I get the following problems relating to web browsing. 1. If I attempt to download anything I get the following error :- Script alert: A critical internal service has failed. after which I click on OK and the browser/application shuts down (and the connection closes). This happens when web browsing e.g. when attempting to download a BBC podcast or using the Ovi Store application to download something. Also it happens whether I'm using my provider's 3G network or a wireless network. 2. If in the browser I click on "options" the browser shuts down. I admit that in order to get Ovi Maps I have previously debranded my phone in order to get the necessary firmware updates, but I haven't had this problem with any of the previous ones. FWIW the Ovi Maps application appears to work well and manage to keep the internet connection up for a long period when online. Does anyone else have this problem? Can anyone suggest anything or will we simply have to hape that the next firmware update comes quickly and cures the problem? Thanks in advance.

Zen Nano Plus - Connection Problems and Firmware Upgrade probl

Like many others posting on this forum, for a while I had problems trying to get my GB Zen Nano Plus to be recognized by the .0.03 Firmware Update software.
I eventually got it by doing this:
While the Firmware Update software was "Searching" for a device, I kept on unplugging and plugging in the Zen Nano Plus from the USB cable while holding down the Play button, unti it "caught". I tried this since I noticed it would initially see the unit saying "A device has been detected in recovery mode...", but then throw the unit into "non-recovery" mode and hence force the Firmware Update software to keep on searching.
Anyhoo, after it did finally "catch" it (after about 0 times unplugging/plugging while holding the Play button down), it showed my firmware as .03.02, and so I did the upgrade to .0.03. The upgrade said "Complete". I then take the unit off of USB, and put my battery back in. and. uhm. well. Now it won't turn on at all. *sigh*
So there I go again in the "unplug-plug" loop on trying to get the older .03.02. Finally caught after about 30 times (yes my hands are tired). And after downgrading to .03.02, putting the battery back in, the unit turns on fine.. WHEW.
So, beware to everyone. Not sure if I'd trust the .0.03 Firmware. Doesnt seem to work on my Zen Nano Plus, and I JUST bought the thing from Circuit City about a week ago.
And for those of you having problems getting the Firmware Upgrade to work.. try my (tiring) method.
I tried this on my Dell D600 laptop (actually used the USB ports on the docking station).
-taka

lcvdw wrote:Can you tell me what I am supposed to see if it is connected properly?
With your player connected and View, Devices by Connection selected in Device Manager navigate through as follows:
Advanced Config and Power Interface (ACPI) PC
->Microsoft ACPI-Compliant System
-->PCI Bus
You should then see a series of USB Host Controllers that you will have to click through in turn to find the one your player is connected to.
Underneath each controller should be a USB Hub, and then devices are listed beneath the hubs.
For my N200 I have USB Mass Storage Device, Creative MuVo N200 USB Device then Generic Volume.
Your entry should be similar but with Zen Nano Plus instead of N200.
While you're there, right-click on the entry for the hub attached to your player and select Properties. On the Power tab it will show how much current the port can supply and in the Attached Devices list it will show how much power the player needs. In my case the hub supplies 500mA and the player needs 00mA.
PB
Message Edited by PeeBee on 2-30-2005 02:05 PM

T410i SSD user and master password problem after firmware upgrade

Hello.
I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
Previous firmware version: 1.3
Current firmware version: 1.3.3
SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

Having problem with firmware upgrade on WRT54G V8

i have searched the forums but havent found an answer. i just got a WRT54G V8 router and was about to update the firmware. i downloaded the .bin file and went to my router ip addy and then to the firmware upgrade tab but when i went to click the browse button nothing happened. does anyone know whats wrong?

If you are using the wireless computer then,do not use it to make any changes or upgrading the firmware on the router.Use the wired computer.If you are using the wired computer then,try to use the different browser (preferably IE)or different computer.
If that does not make any difference then,hard-reset the router and try to upgrade the firmware.

E 72 GPS and E-mail problem after firmware upgrade...

Hi - to all the gurus out there,
1. i upgraded my firmware to 31.023. Now My GPS (whether using Ovi Maps or Google Maps) locks only at home ( probably the place of my last GPS lock before the upgrade- my guess). Tried many times but it simply refuses to lock anywhere else.-- annoying - someone help please
2. The mail client has become unbearably slow and doesnt update using 3G or GPRS anymore. I checked all access points selections and everything else in settings. In fact except for WLAN, its become a `Non e-mail capable` phone.
3. Skype only lets me IM now??????? weird!!
4.Snaptu only logs in on WLAN.
5. and last but not the least.. in the chat setup. the keyboard doesnt work anymore.
waiting for some help
thanks

Ok, Now the GPS seems to have resolved itself after I deselected `Network Assisted`, but initial lock time seems much longer. Maybe that was the problem.

5300: Problem with firmware upgrade

Hi,
I have Nokia 5300 Xpressmusic with firmware version 4.7. I have recently download Nokia Software Updater and tried to update my phone via USB cable connection. The software runs fine, it identifies my phone correctly, checks for update & tells me that V5.5 is available & downloads it successfully. The problem is that when I press the 'Upgrade' button, 1st it reboots my phone in 'Test Mode', then the 'Preparing installation' window remains on the screen for a couple of minutes & then it gives out an error saying "Connection to phone lost". I've tried reconnecting my cable but it still gives out the same error. Fortunately when I took the batteries out & reinserted & started my phone, it turned on successfully with the previous firmware version. But I still cant get it upgraded. I switched to another PC & tried it there but it still gives out the same error at the same stage. Kindly help me out with this, what is going on here?

16-Mar-2008 09:50 AM
omensa wrote:
Hi,
I have Nokia 5300 Xpressmusic with firmware version 4.7. I have recently download Nokia Software Updater and tried to update my phone via USB cable connection. The software runs fine, it identifies my phone correctly, checks for update & tells me that V5.5 is available & downloads it successfully. The problem is that when I press the 'Upgrade' button, 1st it reboots my phone in 'Test Mode', then the 'Preparing installation' window remains on the screen for a couple of minutes & then it gives out an error saying "Connection to phone lost". I've tried reconnecting my cable but it still gives out the same error. Fortunately when I took the batteries out & reinserted & started my phone, it turned on successfully with the previous firmware version. But I still cant get it upgraded. I switched to another PC & tried it there but it still gives out the same error at the same stage. Kindly help me out with this, what is going on here?
Get it updated at Nokia care. If the phone is in warrenty they do it free for you.
If my post has helped you please click the white star on the right

Problems after firmware upgrade to 3.2.10.30101

I have just updated my Iomega Home Network Drive (Cloud Edition) to 3.2.10.30101. How I wish I had looked at this forum before I did! Had the same problem as described elsewhere during the firmware update with never getting past the "Restarting" message.
On start-up now the network drive is not visible until, as suggested by Steven_Lenovo in other related discussions, th e network cable is removed and reconnected. Then it is visible to Windows Explorer and can be "pinged". So no data loss - hurrah!
However, when starting up the EMC Storage Manager interface I cannot get to the Home Screen (I get the "Restarting" Page) unless I wait for around about an hour, and it is only after an hour that the white power light stops flashing.
Pointless submitting a ticket as I have had my network drive too long, but maybe someone can come up with a better fix than re-plugging the network and waiting for an hour every day, and If not, maybe it will make people think twice before installing this upgrade (and earlier ones looking at the number of post-firmware update problems).
Solved!
Go to Solution.

Hello LesleyG franmart,
Is the unit fully booting? It should have a solid white power led once fully booted.
If the unit is not fully booted, the web interface will not fully load and usually show a progress bar or a restart message
If the unit is taking a very long time to boot, but does eventually finish you may want to try the following if you have not already.
Do a hard reset
To do this (This is not Data Destructive):
#1. Press and hold down the reset button for 4 seconds.
#2. Then remove the power cord while still holding the reset button.
#3. Wait about 5 seconds and then plug the power cord back in while still holding the reset button.
#4. Release the reset button after 4 more seconds.
Cycle the unit.
#1 Turn of the device
#2 Disconnect the network cable
#3 Turn on the device
#4 Wait a few minutes then connect the network cable
Connect the device directly to a computer
#1 Turn off the device
#2 Disconnect the network cable from the router and plug it direct into the computer
#3 Turn on the device
#4 Allow for the unit to boot up
#5 Open the command prompt or terminal on your computer
Command Prompt (PC) : Start > "cmd" in the search (no quotes)
Terminal (Mac) : Finder > Applications > Utilities > Terminal
#6 Run the following Command arp -a (there is a space between both)
#7 Look for a Physical Address starting in 00-d0-b8 and there should be an IP Address associated with that.
That IP Address will be where the device is located and you should be able to access the web interface by
typing that IP into your browser.
If the above doesn't help, a full factory reset from the web interface or firmware reimaging may be needed.
Contact the Lenovo Support by phone or chat to request the USB imager (This is data destructive).
Please ensure that you have processed any and all data recovery or backup attempts before you proceed to
this option.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Link problem since firmware upgrade

Hi,
Just upgraded to latest firmware on ix4-300d, link doesn't work anymore!!!
Any idea?
Thanks
Solved!
Go to Solution.

Are you using the old Iomega Link or the new LenovoEMC Link? I would recommend downloading the LenovoEMC link if you haven't: LenovoEMC Link iOS and Android application
Have you enabled port forwarding on your router? You might need to. Check to make sure that the ports are forwarded correctly: Why can't I connect remotely to my Iomega device or Personal Cloud from my Iomega Link App?
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Problems after firmware upgrade befw11s4!

I just upgraded to firmware 1.52 to try and get my wireless network working better with my vista laptop. It has caused nothing but trouble. The router keeps going offline and I have to keep reseting it! I really do not want to shop for a new one!
Thanks,
Brian in MI

Did the reset thing several times. I have since rolled the firmware back and reset a few times. I can only connect to the wireless on this router now with security disabled. I have tried all the channels and different security settings to no avail. There can be only one solution now and that is to buy a newer router and I am sorry to say it won't be a linksys. Thanks for the replies.
Brian

Problems due powershell upgrade

Hi guys!
I want to update powershell from version 2.0 to 4.0 on some VM 2008 R2 but i read about some problems after updating powershell and now i'm scared to fail.
Can you show me the best practices to update powershell please?
These VM are working great, i don't want to stop them for repairing.
Thanks
A

Read
this
I recently upgraded and I have had no issues what so ever.
If this is helpful please mark it so. Also if this solved your problem mark as answer.

Problems after firmware upgrade to 7.6.3

Just want to report that updating to 7.6.3 caused my router to loose LAN and WiFi connection about 15 times in a week. I never had problems before and only reason I went to 7.6.3 was to be able to use DLNA at my home; however, these connectivity issues forced me to go back to previous firmware version 7.6.1 which does not support DLNA. Note that since I bought my airport express over a year ago I never had problems.
If it helps in any way, the devices I have connected are: 2 Windows 7, 1 Windows Vista, 1 MacBookPro, 1 iPad, 2 iPhones, 1 TV over wifi, 1 TV over LAN, and a apple TV.

I had the same problem going to 7.6.2 from 7.6.1.
Going back to 7.6.1 took care of the frequent disconnects. I haven't tried 7.6.3 yet.

Problem with firmware upgrade with new battery.

Replaced battery on 30gb Vision M, with the original firmware of .40 - kept just a half charge. Went to install firmawre .62, and got stuck in reboot for about 30 minutes. Unplugged the cable, and now player's blue light flashing, and computer does not recognize player. The battery was already half empty, I hope I did not fry the new battery. Tried to reset while holding the on switch, and no go. I saw somewhere that I might need a dedicated power source other than USB to recharge the new battery. Was I supposed to update the firmware in increments? Just got this thing after years of SANSA use, and really like this one. Any advice or help is much appreciated. -Nash

If you don't already have one invest in a wall charger for the player. The PSP (playstation portable) wall charger will work with it. Keep trying to boot to Recovery mode after you have charged? the battery then start over with doing the firmware.

760GM-p23 (FX) problem due firmware upgrade H60 [SOLVED!]

Similar Messages

Maybe you are looking for