768kbps with 160kbps audio won't work

I have used Videora to convert all my videos to H.264 with 768kbps and 160kbps audio. The videos will not transfer to my iPod with iTunes. Why is this? It clearly states here on Apple's website that the ipod supports up to 768kbps with 160kbps AAC when using H.264. I did exactly what they said i could do and it will not transfer to my iPod.

I had similar problems with the 768 pre-configured setting in Videora - in fact that setting converted at close to 900 kbps, and half my videos would not load onto the iPod, unless I did a forced hack, which is cumbersome.
The pre-configured setting that seems to work at close to 768 kbps is <<H264/320x240/640kbps Stereo/128kbps>>. Just change the 128 kbps to 160 if you choose to and save it by clicking 'Apply' in the lower right hand corner. It seems to work most of the time for me.
Good luck

Similar Messages

Apple TV2 airplay audio (via Airport Express) works well with music, but won't work with any video.

I have an ATV2 and Airport Express connected to speakers all connected to the same network. It all works with music, but won't work with any video audio. In my ATV's settings I've selected my AirPort Express speakers. It works for music, why not everything else? Is there a fix or work around?

Netflix is first on that list...What I mean is, if there is a feature that allows for a wireless audio connection to the Apple TV, why wouldn't the developer allow it. To keep me from enjoying a more convient connection? I can have the same listening experience on a wired connection...

I just installed Lion 3 days ago, now my audio won't work, unless I use headphones, also space bar glitches, and other software issues..MacBook Pro 15 inch, and most everything is messed,,but the audio is killing me.

I installed Lion a few days ago, ever since then my audio won't work, unless I use my headphones. Also, the saver screen with password changes frequently, and the space bar works when it wants to. There are many other issues I am having. My IPhoto,,does not work properly, pages is not working, I have all versions. The Office Suite is acting strange, and my email accounts work when they want,,,my IPhone 4 won't sync anymore. The list is endless...does anyone else have this problem?

Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510

[Solved] Pulse Audio won't work on newly installed system with Gnome

About a year ago I got a new computer and more or less retired my old one with my first arch install. Recently, I decided I would set it up as a Linux system for my sister. I first updated the computer, which broke it royally (since it was last updated before the /bin symlinking happened) but I eventually got it fixed. However, after doing that, Pulse Audio wouldn't work, then I broke X and decided to do a full reinstall.
Now, on this clean install, Pulse is again not working. I have set up Gnome and gdm to work, and everything works great except Pulse. The wiki says that Pulse with Gnome 3 requires no extra setup, so I have not edited conf files at all. I have, however, installed "pulseaudio-alsa", which created this conf file:
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
# vim:set ft=alsaconf:
which seems fairly standard. Anyway, I tried removing it and had the same problems. When I have Pulse Audio running and try to play sound, I get the error:
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -16,Device or resource busy
which is obviously trying for ALSA, or from mplayer:
AO: [pulse] Init failed: Connection refused
Running "pacmd list" nets me:
Daemon not responding.
and pavucontrol gives me:
Fatal Error: Unable to connect to PulseAudio: OK
when I try to start it.
No pulseaudio commands seem to work (e.g. pulseaudio -k). They don't raise any errors, but also it doesn't have any effect on the server.
The only asound conf file is "/etc/asound.conf", clearing ~/.config/pulse does not fix the issue.
Journalctl does not seem to give anything interesting (Stale PID is the only message when starting Pulse), though admittedly I'm just vgrepping all of journalctl since I don't know how to narrow it down more, nor does the output from pulseaudio -vvvv. There are a lot of errors in pulseaudio -vvvv, but they all appear to be related to loading devices that don't exist, and so I assume not a problem, I can post it if necessary. Sometimes when I kill Pulse the process refuses to go away and I have to reboot in order to clear the process out, but I don't think that's related.
If I kill Pulse or keep it from starting on boot, I can play sound, but only through ALSA, and while I didn't have the problem I expected (I can still play multiple things simultaneously) there's still the issue that the volume buttons in Gnome will no longer work and that the volume levels ALSA reports are basically nonsense to a human being.
I basically just blurbed everything I thought of/found on the wiki or forums, and I'm not really sure where to go from here. It's a fairly old computer, so that could be related, and I'd be willing to dump Pulse if Gnome could integrate well with ALSA, but obviously fixing Pulse would be the preferred option.
Any suggestions on where to look next? I've run out of ideas.
Thanks.
Last edited by HuFlungDu (2014-01-07 19:52:11)

Wonder if you have a conflict between two audio cards ... for example, I have a friend with some PulseAudio problems caused by conflict between the HDMI audio from his graphics card and his onboard sound. Something would switch PulseAudio to the wrong card and it would just quit after getting itself into a twist. Unsolved, I'm afraid, but have a look at commands such as:
aplay -l
pactl list sinks
pactl stat
(Latter two will need PulseAudio coaxed into life first)
and of course, the Arch wiki.
If there is a conflict, blacklisting kernel modules might also be needed.

HDMI IN audio won't work on HP ENVY 27 ALL-IN-ONE

Hi, i've got another PC connected to my ENVY 27 ALL-IN-ONE PC, and when the computer was on windows 8 the audio when plug a pc or whatever on the HDMI IN worked fine, but yesterday I upgrade both of my computer to windows 10, and the audio when switching to the HDMI IN won't work anymore! HELP!

I have the same problem with my HP all in one computer, I havent found any fixes yet. I use th HDMI input for my verizon FTOS TV. I have rolled back my Windows 10 upgrade to my previous OS amd it works fine. I am gonna wait and see if there is a fix found before I upgrage again to windows 10. If no fix is found.... goodbye windows 10!

Metadata with Multichannel Audio doesn't work...

I've been attempting to create metadata entries for some movie files and have found that the data will display properly only if the file has 2-channel audio. Other files with multichannel audio will not display the info correctly from within iTunes. I'm referring to such things as the poster frame, movie rating, list of actors, and description. I've used some freebie apps such as MetaX and vID Infiltr8 to get the 2-channel files to work, but no success with 6-channel audio files. Is this a bug, or will I need to acquire some additional software to import the data correctly?
Thanks...
PowerMac G5 Mac OS X (10.4.9)

To revert to 10.6.3 or whatever you were using before 10.6.4, you'd need to reinstall the earliest Snow Leopard version you have (either the one that came preinstalled on your machine, or if the machine is older than SL, then the Snow Leopard version that you got on a DVD later). Then reapply the Combo Updater for the version you want to revert to (10.6.1, 10.6.2 or 10.6.3). Then run Software Update to get all the ancillary Apple updates that are compatible with that version of SL.
I presume from your interest in reverting that you had the Kanex adapter before you updated to 10.6.4, and it worked as expected then. Is that correct?
If it isn't, and you haven't had the Kanex adapter working correctly at any time in the past, then I urge you to hold off on downgrading the operating system at least until you've gotten some substantive feedback from Kanex tech support and other posters here.

Audio Won't Work: Help Needed!(SB Liv

Tonight I came to my computer and found that the audio wouldn't work. I ran Creative diagnostics, and the first message was that I needed to "reinstall drivers." The second test failed at hardware check, saying no hardware was detected. So I went to Device Manager and it indicated that it was all there. So then I went to Creative's website to check for drivers, after Windows came up with nothing. I found out that there's nothing. So then I decided to do a "Repair" with my Creative Soundblaster Li've! CD. That didn't work either. Then I just did a "Remove", and oddly enough, when I rebooted, it was all still there. In All Programs, in the task bar, it was still there. But only this time I couldn't run diagnostics again because it said that there is missing information or something. So the removal didn't work properly, and ended up removing certain vital components. This left me one step back!
What should I do? Go into Add/Remove Programs and get rid of all Soundblaster components, or get my Resource CD and reinstall sound drivers from it's Should I retry with the Soundblaster CD?
Note: I also opened up my PC after it was suggested by Creative Diagnostics earlier that I check my sound card's physical connection to my machine. I couldn't find anywhere to unscrew the card, so I just put a light amount of pressure on it to make sure that it's fastened in there properly. It seemed absolutely fine. Although I wonder why I couldn't figure out how to remove it.
Also note that I tried system restore, and to no avail.
I honestly don't know what to do at this point. Can anyone help me?!
Thank you!Message Edited by VenaSera on 02-08-200802:26 AM

Hi,
Try uninstalling the sound card following the steps in the article below:
class=MsoNormal style="MARGIN: 0in 0in 0pt">http://us.creative.com/support/kb/ar...asp?l=3&sid=72
class=MsoNormal style="MARGIN: 0in 0in 0pt">
class=MsoNormal style="MARGIN: 0in 0in 0pt">You mentioned: "I also opened up my PC after it was suggested by Creative Diagnostics earlier that I check my sound card's physical connection to my machine. I couldn't find anywhere to unscrew the card, so I just put a light amount of pressure on it to make sure that it's fastened in there properly."
class=MsoNormal style="MARGIN: 0in 0in 0pt">
class=MsoNormal style="MARGIN: 0in 0in 0pt">Did this sound card came pre-installed in your computer?
class=MsoNormal style="MARGIN: 0in 0in 0pt">If this is the case, you might want to contact the respecti've computer vendor for assistance on this issue.
class=MsoNormal style="MARGIN: 0in 0in 0pt">

Front facing camera audio won't work (already cleaned speakers and microphones)

so today i attempted to rake a video and was soeaking, but when i went to watch it, the audio was not working, as you could not hear me talkingg, because it was very faint. when i took a video with to camera that faces outward it worked perfectly fine and the audio was clear. i have already cleaned the microphones and speakers. please help! thanks

Did you hold the phone in a different way, using the front camera? Did your hands cover the microphones or do you have a case around the phone?
Does the microphone work if you use the voice recording app?
If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support

Bluetooth streaming audio won't work w FORD SYNC after previously working.

Simply pull the SYNC module fuse, then place it back in. This should clear up any problems that anyone is having if your bluetooth audio won't stream or your SYNC keeps saying NO BLUETOOTH DEVICE FOUND. You can also disconnect your car battery cables, then connect them back and this will reset the SYNC Module. I am a Ford Dealer in Southeast GA and had the above problem but just solved it.
[email protected]

i got the same issue on my ipod. i figured the whole idea of converting the format would solve the issue. never really found out how to solve it. i'll be watching this post to see if anyone has a solve for this issue.

IDVD audio won't work after installing Audacity

Can you help please?
I am using iDVD 4.0 and installed a 3rd party audio software, Audacity. That's when the trouble started. iDVD kept crashing when I was editing existing projects, and the audio did not work at all in iDVD. I uninstalled Audacity, re-installed iDVD, and am still getting no audio. The audio files appear within the project, but I just can't hear them.
Is there a preference or other file that needs to be removed to fix this? Any other suggestions would be greatly appreciated.
G5 Mac OS X (10.3.8)

Assuming you've first checked Software Update to see if there are any updated drivers and it's still not working, you could try resetting the printing system.
System Preferences>Print & Scan, Control+Click or Right Click on a printer on the left and select 'reset printing system'. All printers will be deleted and need to be added again.

Audio won't work on Facebook with YouTube

When I try to play videos from Youtube via FaceBook, I can't get audio.

Hi there carshmail,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
-Griff W.

PT-880: Onboard Audio won't work with AV710

Hiya!
I have installed an AV710 under Xp sp2, which is grand - but as soon as I have it in place, my PT880 simply disappears from device manager. This is a real nuissance, since I got it specifically so I would be able to use both. Isn't there some way of getting there from here??
Cheers,
Mike Gray

Aaargh!
I just remembered to run a forum search, and I've seen that the bios automatically kills the onboard audio. Grrrrr. This is a major tick off. Does anyone know of a workaround short of buying a second card??
Mike

Airport extreme, audio won't work on windows 7 boot camp for my macbook pro osx lion

Bought my Macbookpro in late 2011 and osx lion, decided to put boot camp on it, but it won't find my airport exrteme or even if i connect the ethernet cord directly into the laptop it still wont conectto the internet, and my audio also doesn't work, even when i plug in headphones, any suggestions?

Sorry for the late reply, I've searched as much as I could all having similar issues but not quite being the same issue. I've tried manually putting in my airport extreme information, search for other connections, start a new connection, all have not worked. I did everything normally to setup windows except put in the authentication code which i have misplaced.
I might've already added the drivers but im not too sure, how would you add the driver, just in case i missed that part

Videos of a certain length pause, resume, then audio won't work

I have the 60 GB video ipod. I've copied over lots and lots of different videos. Mostly short music videos I copied over from DVD's.
I also copied my personal Seinfeld DVD's using various software to get it to the Ipod. It worked fine for awhile but now, any video longer than roughly 25 minutes (Seinfeld, some sermons, etc.), will pause after roughly 1 minute of play, then resume after about 15 seconds, but the video only resumes. The audio will not resume.
They used to work. I did recently do two things and I've played around with reversing them but it didn't help. I downloaded the update to Quicktime. I did a restore thinking maybe it caused it but that didn't work. Also, I associated these shows as "TV Shows" in Itunes, but that meant I had to create a playlist for them to transfer to the pod. I tried associating a few as just "movies" and see if that made a difference and it did not.
I'll keep searching the board as I'm sure some others may have encountered this. In the meantime, please help me if you can. Thanks.

Yes it sounds like bad sectors on the drive are responsible.
Supposely driver software is supposed to map off bad sectors before data is laid on the platters, but sometimes it's not perfect.
If you have software that will Erase w/Zero option (writes Zero's to every bit on the drive) the driver software will then map off every possible bad sector.
Then use the latest iPod Updater to format and so forth.
I had to Zero both my Raptors and 60GB iPods, since doing so I've had no problems.

Audio Won't Work PLEASE HELP!!!

I imported a video into iMovie and when I play it the sound wont work. The audio boxes on the clip bar are checked and everything but there is no sound. Sound works in iTunes and other applications but not iMovie. Is it because the video tape I recorded with is an HD video tape? What do I do? Please help ASAP. Thank you!

Hi mgoldenberg - welcome to Apple discussions!
Frankly, I do not know why. I cannot imagine it is because of the tape. Does the sound play OK on the tape within the camera? The volume slider below the imovie screen is at the far right? Does an imported song play OK within iMovie? You have not inadvertently muted the video clips by dragging the volume down - can be done in two ways:
1. by clicking on the small speaker icon at the bottom of the iMovie window and dragging down the vertical slider.
2. Going View>Show Clip Volume Levels, and dragging down the thin line that appears through the clips.
Are you using an external drive to store your projects - if so it must be formatted OS Mac Extended and not for Windows.
Maybe you should try repairing permissions:
Applications>Utilities>Disk Utility - chose the startup disk, and click 'repair permissions'.
If that has no effect, then try this:
Find and delete this file after closing iMovie:
Users (you)>Library>Preferences>com.apple.imovie.plist
Let us know how you have got on.
Message was edited by: catspaw

768kbps with 160kbps audio won't work

Similar Messages

Maybe you are looking for