770-c45 connect with Home Cinema via coaxial

Hi there, I just bought a new computer with the 770-c45 motherboard in. I'm trying to connect it with my Home Cinema amplifier, via coaxial cable just like I already have my old computer. In the rear panel I put the mini jack in the black pin but I can't get any sound. My Home Cinema is Sony dav dz260 and it supports Dolby Digital 5+1.
I installed the latest drivers for the motherboard but nothing seems to happen. When I connect the cable in the black pin, it recognizes it as an analogue connection. The cable is mini jack at the one end of the cable and at the other one RCA. Could you please help me

Quote from: satyros on 04-September-09, 05:31:26
c mon guys.
THE MONEY IN THE ENVELOPE?
And..? What wrong you see in this? Also as explained you will have to pay much less by that way.
Also as they said they can make it by other ways if you prefer , but you have to pay more.
They are not asking from you to put the money in a bottle and to drop it to a sea to travel to MSI by wave power.. :D
Quote from: satyros on 04-September-09, 15:15:39
The point is tha after that answer I don't trust them .
Nice joke :D MSI is not gonna lie you or trying to steal your money

Similar Messages

  • Cant use iphone4 wifi connect with home network

    Updated iphone4 version 4.3.2 the phone still cant connect with home network via wifi! When before updated was everything normal!
    Could anyone help?
    I switched the rounter on and off and the securty ps from the rounter is correct! But it keeps sayin cannot connect with xxx network, and i have to keep "dismiss" it!
    Please help, is the iphones problem or my rounter?

    ive tried that also, completely disconnecting the modem and router but still same problem, updated iphone software, reset factory and network settings.. still nada thanks for your input tho

  • I am not able to connect with another ipod via bluetooth can u pls help me

    i am not able to connect with another ipod via bluetooth can u pls help me

    Are yo trying to pair via an app that supports BT pairing?  If you are I would try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -Resetting network settings on the iPod: Settings>General>Reset>Reset Network Settings

  • Hello my iphone 3g can not connect to home network via wifi

    Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.

    I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G.  It will access other wifi signals.  My wife's iphone works fine, as does an ipad and macbook.  This is new for my iphone, about 2-3 days.
    Help!  I reset network settings and rebooted the router (Apple), no avail

  • IPod nano does not connect with wireless earphone via bluetooth transmitters.

    My iPod nano(6th) can not connect with wireless earphone via bluetooth transmitter.
    I want to know which is wrong iPod nano or bluetooth transmitter...Now I tried with i10s because I thought previous one (motolora) might be wrong.
    But both can not connect.

    Sounds good.  Hopefully they can provide you with an accurate answer.
    B-rock

  • I am trying to connect with a friend via FaceTime from my IPad to his IPhone  and it will not connect.  We are both on wifi.  What are we doing wrong?

    I am trying to connect with a friend via FaceTime from my IPad to his IPhone  and it will not connect.  We are both on wifi.  What are we doing wrong?

    Read this:
    There is a troubleshooting section at bottom.
    http://support.apple.com/kb/TS5419

  • How do I get my iphone to connect with my PC via WiFi

    How do I get my iphone to connect with my PC via WiFi?

    I Believe you are trying to use personal hotspot so you can use your 3G/LTE on your pc.
    If that's the question, you'll need to turn on "Personal Hotspot" in settings (it's right below bluetooth), then go to your Mac/PC and connect to your iphone as you would with a normal wi-fi connection. You can change the random default password in the same menu where you have turned on "Personal Hotspot"

  • I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?  Thanks!

    I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?
    If not why option available
    Thanks!

    What Carolyn says is correct. You can, however, share an Internet connection with your iPhone wirelessly by turning in Internet sharing (found in System Preferences > Sharing.) If your MacBook Pro is already using a wireless connection, you can just connect to the same wireless network it is using.
    Best of luck.

  • TS1398 how do i configure so i phone connects with home wireless automatically? currently, it connects to prior owners wireless since disconnected.

    how do i configure wifi so my Iphone connects w home wireless automatically?

    Hi Tesserax
    You could, but its benefits may depend on how you have it configured with the D-Link router. That is, do you have the TC directly connected to the D-Link by Ethernet or is it just wirelessly joining the D-Links' wireless network?
    I have the TC connected via Ethernet cable.
    I am assuming that you have the 802.11n AirPort Express Base Station (AXn) configured as a wireless client so that it can join the D-Link's wireless network for iTunes streaming ... correct? If so, then it would be performing like any other wireless client (desktop, laptop, printer, etc.) and will not interfere with the D-Link's wireless network.
    I rechecked the AE and you are correct that the AE is set to join a wireless network.
    With having so many devices running on the wireless network, would it make sense to have a few device on each wireless system?(D-Link, TC, and AE)
    I know it sounds like overkill, but there is the possibility that all the devices could be running at once. I'm not sure if that would cause any conflicts.
    Is there any advantage to turning on the wireless on TC just for the iPhones for example or is it better to keep things as they are?(It works but is it efficient?)
    Please be aware I'm not fully knowledgeable with wireless routers and their capabilities.

  • Apple TV Dropping WiFi Connection with Home Sharing

    I am currently having trouble with my Apple TV and Home Sharing. My Apple TV will connect to my WiFI network (which is only 802.11g) and stream from either the iTunes store for movies, and from YouTube using that connection fine. My trouble starts when I try to connect to another computer with Home Sharing. When I try to connect to another computer (my MacBook Pro, for example, which is also on the same WiFi network) to stream content across the network, the Apple TV looses it's connection, and then the router kicks everything else on WiFi off the network. I am using WPA for WiFi security on the router. I turned off WPA, and everything streamed across the network fine, no drop outs on the Apple TV. I can stream from a desktop connected to the router via ethernet fine (with or without the WiFi security enabled). I think it is probably the router (it is just a little DLINK I picked up a little while back), but I wanted another opinion or some troubleshooting ideas before I do.

    I am having this problem too, I also have a dlink router. Everything works fine until I try using homeshare, after a minute or so I lose all wifi router connections on everything connected via wifi, iPad,iPhone and aptv2. I have to wait for the router to reset/restart to use again. It's very odd, it even happens if I connect the atv2 via Ethernet so it's not a wifi glitch.
    Any suggestions?

  • MSI 770-C45 incompatible with Phenom Z965??

    Hello there
    Recently I've got the Phenom x4 Z965 (125TDP) to replace my old and trusty Athlon x2 250
    My mobo as I said is the MSI 770-C45
    From the cpu support of my mobo I saw that the current phenom is compatible
    I connect everything with each other, cpu, mobo, psu etc, I updated the bios to the latest (1F), I did C-MOS, I load optimised setting from the bios menu, but my pc doesn't boot, it's always get stucked when the colourfoul circles of win7 shows up
    whenever i put back my old Athlon everything works like a charm
    my psu I believe is powerfull enough to handle phenom (Thermaltake Berlin 630W)
    Can anybody suggest a thing??
    I'm devasted 
    Thanks in advance

    thanks for the reply 
    unfortunatelly I live in a small island where almost all my relatives don't have AM3
    as concern the format I believe the solution is hiden there, but I don't want to format my system at the present time 

  • Using time capsule to share internet connection with a pc via ethernet

    Hi,
    I've recently acquired a time capsule and was wondering if i could use it to share a wireless internet connection via ethernet to my non-wireless (windows 7) pc?
    My current situation is that i have a wireless modem/router that shares my internet connection wirelessly with my mac mini.
    I have a pc without a wireless card that i want to connect to the wireless network so i was wondering if it was possible to attach the pc and the time capsule with an ethernet cable, then connect the time capsule to the wireless network and share the internet connection with the pc.
    Can anyone tell me if this is possible, and if so how?
    Thanks

    Welcome to the discussion area!
    IF...your wireless network is now being created by another Apple "n" router like an AirPort Extreme, AirPort Express or Time Capsule, it would be possible to do what you want to do.
    But the Time Capsule would not be compatible for what you want if your wireless is created by another manufacturer's router. The Time Capsule could "join" this wireless network so that backups would occur over wireless. However, when the Time Capsule is configured this way, the ethernet ports on the device are not active, so this would not help with the ethernet connection that your computer needs.
    A new AirPort Express 802.11n would do what you want. It has the capability of joining virtually any wireless network and the ethernet port can be enabled using the ProxySTA feature, so it would work for your purpose.

  • Bought new iphone 6 with Verizon plan 2/11/15. Tried to connect with home wifi  3 or 4 times with I thought the correct password. Now it says Forget This Network Can't its the only one I have and this laptop is connected just fine. How do I clear this and

      Bought a new iphone 6 with Verizon plan 2/11/15. Tried to connect with my home wifi  3 or 4 times with I thought the correct password but now it says Forget This Network and wont let me try again. Can't its the only network available. How do I clear this and start over. Thanks, this laptop connects fine but this is my first smartphone and  I don't see why it gives a crap if I  mess up 50 times! Help!

    Help is right here for you Omichael! Let's get you conneted
    to your home wifi. May I ask are you able to connect to other wifi networks? If
    so then please forget your home network again, turn wifi off, reboot, and
    retest. If this doesn't work then you will want to reset network settings.
    Settings > General > Reset > Reset Network Settings. Keep in mind that
    this will delete ALL wifi passwords that you have saved.
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Q10 will not connect with BB Link via WiFi (updated software)

    Hello!  I have not been able to get my Q10 to connect to BB Link via WiFi since the lastest OS update.  Before, it was not an issue.  I can connect via USB without problems.  I have uninstalled/reinstalled BB Link on my computer and it does not work even though both the PC and the device are connected to the same WiFi network.  The checkbox in BB Link to allow WiFi connections is checked.  It is not the end because I can at least connect via USB, but wireless was so convenient.  Can anyone help? Suggestions? Thanks!

    OK, just messing around with this more tonight.  I was able to finally just get the iPod touch to connect to my phone via WIFI.
    My question or concern still remains about the Bluetooth connection.,,,
    Why is it that she can connect to my Personal Hotspot on my iPhone 5 even when I have the Personal Hotspot on my phone set to OFF? 
    Is this working as designed?  Even if I change my phone's Personal Hotspot password, she can still instantly connect even if I have it set to OFF on my phone.  You'd think that it would require for me to have it set to ON?  Or at minimum, if I changed the Personal Hotspot password on my phone, it would at least prompt her to enter a valid password?
    Thanks!

  • NCO3 - Connection with Message Server via SapRouter fails

    Hello @all,
    i have successfully used nco3 as client (.net framework 3.5 / VS 2008) with an application server connection via saprouter.
    But i tried several ways to connect to a message server via saprouter without luck.
    The parameters i used to connect:
            parameters(RfcConfigParameters.Name) = "Test"
            parameters(RfcConfigParameters.MaxPoolSize) = Convert.ToString(5)
            parameters(RfcConfigParameters.IdleTimeout) = Convert.ToString(10)
            parameters(RfcConfigParameters.User) = ...
            parameters(RfcConfigParameters.Password) = ...
            parameters(RfcConfigParameters.Client) = "100"
            parameters(RfcConfigParameters.Language) = "DE"
            parameters(RfcConfigParameters.MessageServerHost) = ...
            parameters(RfcConfigParameters.SystemID) = ...
            parameters(RfcConfigParameters.LogonGroup) = "USER"
            parameters(RfcConfigParameters.SAPRouter) = ...
    I always get an SAP.Middleware.Connector.RfcCommunicationException with following exception details:
    InnerException     Nothing
    Message     ""
    Source     "sapnco_utils"
    StackTrace     bei SAP.Middleware.Connector.CpicConnection.getASfromMS(Dictionary`2 options)
       bei SAP.Middleware.Connector.CpicConnection.parseConnParameters(Dictionary`2 options)
       bei SAP.Middleware.Connector.CpicConnection.ConnectAsClient(Dictionary`2 options)
       bei SAP.Middleware.Connector.RfcConnection.ConnectAsClient(RfcConfigParameters options)
       bei SAP.Middleware.Connector.RfcConnectionPool..ctor(RfcDestination d, Boolean forRepositoryCalls, String uniqueKey)
       bei SAP.Middleware.Connector.RfcConnectionManager.GetClient(RfcDestination destination, Boolean forRepository)
       bei SAP.Middleware.Connector.RfcDestination.GetClient(Boolean forRepository)
       bei SAP.Middleware.Connector.RfcDestination.Ping()
    Because of empty error message I don't know what to do. It seems that nco3 can't get the application server from the message server, but why? The connection via the old nco2 (VS 2003) works and also if i try to connect with the saplogon ocx from sapgui (some short code in vb6) the connection is established.
    Anyone can help me???
    Thanks a lot.

    parms.Add(RfcConfigParameters.MessageServerHost, "192.168.0.1");
                    parms.Add(RfcConfigParameters.SystemID, "MGF");
                    parms.Add(RfcConfigParameters.GatewayHost, "192.168.0.1");
                    parms.Add(RfcConfigParameters.SAPRouter, "/H/145.145.150.240/H/");
                    parms.Add(RfcConfigParameters.User, "mysapuser");
                    parms.Add(RfcConfigParameters.Password, "********");
                    parms.Add(RfcConfigParameters.Client, "200");
                    parms.Add(RfcConfigParameters.Language, "en");
                    parms.Add(RfcConfigParameters.PoolSize, "5");
                    parms.Add(RfcConfigParameters.MaxPoolSize, "10");
                    parms.Add(RfcConfigParameters.IdleTimeout, "6000");
    I guess you are missing RfcConfigParameters.GatewayHost parameter. Try code snippet given above.
    Regards,
    Ahmed Brohi

Maybe you are looking for

  • BSOD when plugging into Dynadock U3

    Hi There, We have a wide number of Toshiba Dynadock u3.0's working with a number of Sony Vaio Laptops. In the main they have worked pretty well, and have improved over time as new releases have come out. At the moment we are rolling out the new Sony

  • Problem in callable statement

    Hi All, I have a get the data from table using CALLABLE statement.The problem is that that column datatype is CHAR.Is there any statement in java for to set CallableStatement cstmt=null; cstmt.setChar() ----- is it correct?

  • Problem In Executing Query In JSP-Oracle

    I have one Query with some conditions in it. It showing error in JSP page when Run it like FROM keyword not found where expected, but this query running well in Oracle SQL Developer. The query is given below. SELECT SCC.STACK_ID, S.SEVERITY_LOWER AS

  • What are the sap scripts

    plz tell me any tutorials abt the sap scripts

  • Scroll up page

    Hi, I need to recreate apex builder feature in my own application: a small up arrow located in right up corner of many original regions that allows to scroll page up onclick. The source code: <div class="rc-buttons"> <img src="/i/up_arrow.gif" alt="T