785GM-E65 another M-Flash frag

Hello MSI forum,
I am one of users who used M-Flash to flash newer BIOS and knocked out my motherboard.
I searched many topics with similar problems (so many?) and some with bios recovering, but nothing solved my problem.
I followed procedure
1) clear cmos
2) use only closest memory bank to cpu
3) connect PS/2 keyboard
3) connect floppy disk drive
4) hold down ctrl+home and turn on system
After turning system on CPU fan spins, keyboard leds flash and that is all. Black screen, no floppy attempts.
Is this motherboard really dead?

Quote from: amissus on 17-December-09, 16:31:24
APS for me works perfectly with BIOS 2.3. Best idle consumption I have ever seen.
MSI support responds to me about 24 hours and they are willing to listen and communicate.
Their replied about M-Flash:
"We modified M-flash function in the latest bios version, which you can refer to this link:
bios
As to your information about M-flash, we will send this to related department to improve later."
So BIOS 2.3 contains modified M-Flash, but for me nevermore.
Have you seen the LED's go down to just one phase? for me they stay on all the time. (obviously I have green power, and C'n'Q activated in the BIOS)

Similar Messages

  • Help please - 785GM-E65 return from RMA but still KO..

    HI,
    my 785gm-e65 was broken after the m-flash use.
    no POST at all.
    RAM, 1 month then came back this morning.
    i put the sempron with its rad, the ddr3 and the power switch, then the VGA plug, and ....
    no POST ...
    clearing CMOS without power plug did not help.
    so my question is, may be its not my mobo, but to debug, i need to know what are the minimal things to POST.
    should i have POST without CPU and RAM, only keyboard and VGA plugged ?
    i tried this and nothing..
    HELP me solving this problem, before calling again the seller..
    [comment removed]

    ok, that's what i thought :
    CPU+RAM+IGP+power on mobo+power switch
    specs:
    sempron140
    DDR3 noname
    antec NSK1480 with PSU
    the thing is that everything was working before M-flash, and after that i RMA my mobo
    it's coming back and they told it's fully functional...
    but still not working, so it's hard to believe that my CPU or RAM is defective, because they were working without trouble..

  • Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

    Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

    There are some upgrade options available from do it yourself sites.
    See the MBair SSD upgrades on mid way down this page:
    http://eshop.macsales.com/shop/SSD/OWC/

  • 785gm e65 and ssd

    Hi, i have the msi 785gm-e65 moptherboard and i would like to ask if it supports ssd drives and trim.I am interested in installing an samsung 830 ssd.

    Quote from: Fredrik on 19-January-12, 06:30:30
    A bit off: Does anyone know why they call it IDE mode? Whether a hard disk uses "AHCI" or "IDE" mode it is still usually an IDE sized disk.
    Sorry Fred, it's actual a reffering to the circuitboard on the drive, nothing more.
    In the old days they used to have "smart" controllers and dumb drives.
    Now they have dumb controllers and "smart" drives, as such they moved the electronics to the drive.
    The protocol the drive uses is ATA or AHCI, funny is that RAID isn't a protocol for the drive to use

  • Copy frames from one movie to another in Flash 8

    How do you copy frames from one movie to another in Flash 8?
    I found this one, but it does not work on Flash 8.
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_12863
    I want to copy the contents of a scene from one movie, and
    then create a scene in another movie and paste it in there.

    Adesi wrote:
    > How do you copy frames from one movie to another in
    Flash 8?
    >
    > I found this one, but it does not work on Flash 8.
    >
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_12863
    >
    > I want to copy the contents of a scene from one movie,
    and then create a scene
    > in another movie and paste it in there.
    you must be doing something wrong, the above tutorial is
    correct and it is the
    only way to copy paste frames in flash.
    Make sure your layers are not locked. Locked layers cant be
    copied.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • MOVED: Sos Voltage Settings on MSI 785GM-E65 Help Help SOS

    This topic has been moved to Overclockers & Modding Corner.
    https://forum-en.msi.com/index.php?topic=136226.0

    Actually it concerns the Voltages.
    When I installed this CPU in this board everything was AUTO, in Windows the Voltage read 1.4v.
    This 955 Black Editions has Stock Voltages of
    CPU VDD 1.35v
    CPU-NB VDD 1.25v
    HT Link 1.2v.
    However because the BIOS does not output all these voltages in the Right Column as to what they are set to reflecting realtime measures, one has to 'boot' into Window to look at the readout. 
    BIOS Terminology is my main concern so I can set them appropriately to 'stock' first then raise them.
    It seems with this board because it has the several different methods to OC that some voltages cannot be adjusted properly so they are already preset to certain stable measures pre-thinking someone will OC.
    This not good.  Since if the Processor for the CPU VDDC voltage is set high the VCORE get hot quick.
    So, I'm asking for the correct stock voltages for the above for this 955 Black Edition CPU RB-C3 125w/TDP
    on this MSI 785GM-E65 Board.  Don't care about OC at the moment. 
    I need to know from MSI what the stock voltages are for Each Option.
    Lastly, the NB Chipset voltage is set at 1.3v from the Factory along with the HT Link.  When I lower the HT to 1.2 the SB voltage activates and these two move in unison. Which is very uncool and odd.

  • Can I copy HP Recovery Media to another USB flash drive?

    Hi. Just a couple questions please: 1. When I make the one time only "HP Recovery Media" to a USB pen drive, can I then "copy" and "paste" to another USB flash drive as long as the 2nd flash drive has enough capacity?The Recovery will still work right?I ask this in case I need to change to another USB flash drive and I am aware that I can only have one copy of the HP Recovery. 2. If that is the case, I then can also make a backup to an external Western Digital drive so that in case of malfunction of the USB flash drive I can always transfer the files to another USB flash drive? Thanks in advance for the reply. Best regards. 

    Hi, Copy and paste won't work. Please try the following method:    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/This-is-how-to-make-a-2nd-set-of-recovery-disks/td-p/1694703 Regards.

  • Yet another Adobe Flash Player zero-day discovered from the Hacking Team breach.

    Thanks for the heads up Symantec Matt. 

    Aaaahhhh yes... remember when an entire day could by without news of a breach or hack or targeted attack? Yeah... neither do I.It will probably shock you all to hear that the Symantec Security Response team dropped a new blog over the weekend outlining a Zero-Day vulnerability in Adobe Flash player. Dig it:Second PoC Exploit for Adobe Flash Player Discovered After the Hackers-for-Hire Company Breach
    Yet another Adobe Flash Player zero-day discovered from the Hacking Team breach.Symantec is aware of a second vulnerability (CVE-2015-5122) in Adobe Flash Player that’s associated withHacking Team, the Italian company which recently suffered a major data breach. The existence of the unpatched vulnerability has been confirmed by Adobein itssecurity bulletin.Symantec’s analysis has confirmed that the vulnerability can be successfully exploited...
    This topic first appeared in the Spiceworks Community

  • Slow Upgrade to 785GM-E65

    Hi,
    I am interested in migrating my current HTPC (Asus M2A-VM HDMI) to the 785GM-E65 motherboard. I want to take advantage of some existing components however, as I don't want to absorb the expense all at once. I've read various online reviews and have gotten some conflicting data. My questions:
    Is this mobo compatible with AM2+ CPUs? I want to use a Phenom X4 9750 for now, and move to an Athlon II X3/4 at a later time
    Can I use DDR2 800Mhz memory with this unit? Again, with this notion of moving to DDR3 in the future.
    Thanks!

    No, the board only takes AM3 CPU and DDR3 memory.
    http://eu.msi.com/index.php?func=prodmbspec&maincat_no=1&cat2_no=&cat3_no=&prod_no=1864
    To reuse parts you need to take an AM2+ (AM3 ready) board with DDR2 slots.
    Then you cvan use AM2(+) and AM3 CPU's, but not DDR3 memory.
    If you goto an AM3 board you have to move all of it now.
    Else go AM2+ board and you can use an AM3 CPU in it later (if the board is AM3 ready)
    See a sample of such a board: http://eu.msi.com/index.php?func=proddesc&maincat_no=1&prod_no=1642

  • As the Administrator Flash won't work, as another user Flash works

    I have an HP with XP home edition SP2. I'm set up as the
    administrator and my son is set up as an user. I'm running Flash
    9.0.115 and generally have no problems. My son goes to the Webkinz
    website and logs on and plays the games and has no problems. When
    my wife goes to the same web site and logged on as the
    administrator all she gets is a white screen. When she logs on
    using my sons account she has no problems. I;ve noticed a few other
    sites where I get the black screen but if I log in under my son's
    account I have no problems. I've tried all the fixes and trouble
    shooting tips I can find but nothing works. I had no problems at
    all until we up graded to version 9.

    The problem is that Flash Player 9 creates registry keys that
    grant permissions only to the administrative user who installed it,
    and no others. I've tried uninstalling and reinstalling from anothe
    administative user account, and then the 2nd account can use it and
    the first cannot. I've gone in and looked at permissions on the
    registry keys with both installations, and it's clear Adobe's
    install sets up registry key permissions for just one user. I've
    verified this on one of our home PCs and one work PC, both running
    Windows XP SP2. I've reported it to Adobe support and have been
    waiting since Jan. 3, 2007 for a response.

  • Transfering files from iTunes on one PC to iTunes on another with flash drv

    Hi,
    I recently bought a new laptop and want to transfer my old iTunes purchases from my old laptop to the new one. I am using a Seagate 5 GB flash memory drive.
    I can copy the files onto the flash drive, but when I import them into iTunes, I have only figured out how to import them one at a time, by clicking on each artist folder, then the album and finally the mpeg4 file in the folder, and using the iTunes import command.
    There must be a faster way to import - especially since I have only bought one or two songs from each of the artists that I had on my old laptop.
    Can anyone advise or point me to the appropriate post or support area (I tried a number already)? Apologies in advance, this is probably a really basic question.
    Thanks,
    Will.

    You can copy the entire 'iTunes' folder from one PC to another (using multiple transfers, if needed), then 'clone' the Library.
    Copy all the folders and files (intact) over to the new PC to the exact same path. Then copy the Library database file as well. Open iTunes and your Library will be a replica of the old one - no importing necessary.
    See: http://discussions.apple.com/message.jspa?messageID=1585950#1585950

  • Problem loading one SWF into another in Flash AS3

    I am trying to load an SWF file in another SWF file. The child SWF file works fine when run standalone like if I set visibility of an item to true or false, it works fine. But when the SWF is loaded into a parent SWF, I am not able to execute such commands, neither I get any errors...

    are both swfs as3 swfs?
    is the code in the loaded swf and is that code referencing objects in the loaded swf?

  • 785GM-E65 eSATA Hot-swappable problem

    Hello!
    I bought a new Wiretek VE492 Hard Drive Docking Station to use my Hitachi Deskstar™ 7K2000 2TB HDD like external drive, but have a little problem in use: don't work the eSATA hot swappable function! What is the problem? (The docking station is perfect, I have tested with another pc)
    Thanks the answer!

    Turn AHCI on in the BIOS.
    However it may stop your Windows from booting.

  • 785GM-E65 HT ref wont clock high as 790GX AM2+ boards.

    I cant seem to get the HT ref out of the 260's I have lowered everything and still no. Is there a weak clock generator on this board or is it in the BIOS (I doubt it is the bios)?

      Sorry about that:
    #  CPU brand, model and speed: AMD Athlon II X4 620 (@ 3.4 now I would like to get back to 3.9+) This exact one: http://www.techreaction.net/2009/09/25/athlon-ii-x4-620-ferrari-this-mustang-can-hang/
    Motherboard model (full marketing name, not just MS-xxxx) - How to identify your motherboard and BIOS version: MSi785GM-E65 S/N:601-7596-020b0908075097 BIOS REV AMI 2.2
    Memory brand, type/speed, size, number of sticks G.SKILL 2GB (2 x 1GB) 240-Pin DDR3 1333 Dual Channel Kit Model F3-10666CL8D-2GBHK
    Video card brand, chipset type, memory size: using integrated 785G
    Hard drive(s) brand, size, type, speed: WD 160 GB PATA
    Any other peripheral cards and devices: no
    Operating system and version (including if 32 or 64bit!) XP 32 SP3
    Power Supply Unit brand and output in watts and DC output (amps) -How to find your PSU specs: RAIDMAX RX-450K 450W ATX12V
    I am drawing 58w @ 3.4 idle temps ~23 with 123.75w @ 3.4 100% load all cores & GPU folding 100% load at the wall and the CPU is ~52.6w @ load during operation temps not exceeding 41.
    I have had this CPU @ 308 Ht ref on a 790GX AM2+ board and wanted to move to this board for efficiency and better OC potential. I have moved the CPU from the old board to the new MSi to make sure it was not a cpu problem. I have moved the PSU to other rigs and it has no problems. The memory passes memtest.

  • Put Home Hub 5 in another socket - flashing red

    Hello
    Before we moved into our home, the upstais office was used as the main socket for the BT infinity which the previous occupants had. This socket is the MK 1 socket I believe.
    When we moved in, the BT engineer fiddled around and put one of the dual MK 2 sockets in the kitchen and put the home hub into that one. I have now decided to move the hub upstairs the older socket, but as you can guess, it won't work.
    There is a dial tone and the phones in this socket work fine, but the home hub 5 has a steady orange light and the little broadband light is flashing red, indicating no broadband.
    As someone who knows little about the workings of telecomunications in a home, I really would appreciate some advice on what the problem is, and how to solve...

    Other occupants will be connected using wireless, or broadband extenders.
    The home hub is in the best place, to ensure you get the best connection speed. I would not attempt to change anything, and it would cost you £130 if you called an Openreach Technician in to change things, as the way its been installed, is the correct way.
    You could end up with a very unreliable broadband connection, as the extension wiring would interfere with the signal.
    If the wireless signal upstairs is not strong enough. Then there are some solutions on this page.
    http://www.shop.bt.com/mini-sites/bt-connected-home/home/
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Maybe you are looking for