785GT-E63 and cpu core control

In BIOS 7551vS4 MSI removed cpu core control, ie, I can't disable the broken kernel, if what some Athlon II X3 is not critical, I can use old BIOS, but for the Phenom 960T is a problem. This CPU supported just starting S4 bios
How I can use 5 cores? I want to return this option or add processor microcode in the old BIOS.

All cores are enabled by default (Auto). The other settings are meant to limit the enabled cores.

Similar Messages

MSI 870A-G54 (FX) CPU Core control unlock setting error

Hello,
My motherboard MSI 870A-G54 (FX) has strange issue: CPU Core unlock option is not working properly. I've switched in BIOS Cell Menu the setting "CPU Core Control" - Enabled, and after the restart, there is error message about RAM chek - till 3325 MB instead 16 GB, and after that windows7 Ultimate x64 tries to load, but unfortunately displays the Blue Screen of Death. After disabling CPU Core Control option windows start normaly. Also after using MSI LiveUpdate5 and installing BIOS Code unlock Technology 1.0.106, I got the following message: Error Message
PC Hardware details:
CPU - TripleCore AMD Phenom II X3 Black Edition 720, 2800 MHz (14 x 200), Codename:Heka, Core Stepping: RB-C2
16GB (4x4GB) Kingston KVR1333D3N9/4G
VGA Sapphire Radeon HD 4830, Codename: RV770
Windows 7 Ultimate x64, SP1
BIOS V17.18
I'll be glad to have some of your ideas how to handle it...

I also have an X3 720BE. Mine will not unlock, some do not... it's not a built in feature on 'All' CPU's.
That said.. I have owned mine since the beginning of AM3. It has been a great CPU with 3 cores. I have had OC settings at or above 3.4GHz stable.
If you search you can find a lot of OC information. This was an early release AM3, and a lot of owners, forums, test websites etc.. have information available. I still use it in my HTPC.
Owners who have been able to 'unlock' thier CPU's do get extra core(s).. but it's not as stable. I would rather have a stable, able to OC CPU than an unlocked one that can't obtain the OC stable numbers. It's a mind game.
Good Luck

Only one CPU core recognized [solved]

For some reason the kernel only recognizes one CPU core out of two. I'm not completely sure at which kernel upgrade it disappeared but it is gone in 2.6.36 and 2.6.37. I know it was still there in september 2010 and earlier. I'm using a x86-64 kernel.
cat /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Athlon(tm) II X2 245 Processor
stepping : 2
cpu MHz : 2913.253
cache size : 1024 KB
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc up rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save
bogomips : 5828.27
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
Motherboard is: Gigabyte MA770T-UD3P. I use the latest bios.
I have tried adding the kernel options "acpi=off noacpi apic=off noapic" as to the suggestion of a ubuntu bug report in launchpad but it didn't help. I also disabled ACPI in the bios but I'm still limited to one cpu core.
Any ideas?
[SOLVED]
I just doublechecked the BIOS settings and it had the CPU Core Control set to manual and one core was disabled. I set it to auto again and now both cores are recognized correctly. I don't recall ever touching this setting but at least it works now. Maybe a bios update actually changed the setting or (more probable) a friend of mine.
Last edited by Baraclese (2011-01-17 19:01:02)

JOhnLiu wrote:
thanks for reply sb92075
[root@localhost ~]# mpstat -P ALL 2
Linux 2.6.18-164.el5 (localhost.localdomain)    09/12/12
09:29:09     CPU   %user   %nice    %sys %iowait    %irq   %soft %steal   %idle    intr/s
09:29:11     all    0.01    0.00    1.27    0.01    0.00    0.01    0.00   98.69   1658.29
09:29:11       0    0.50    0.00    0.00    0.00    0.00    0.50    0.00   98.99   1657.29
09:29:11      73    0.00    0.00    0.00    0.00    0.00    0.00    0.00 100.00      0.00
09:29:11      74    0.00    0.00 100.00    0.00    0.00    0.00    0.00    0.00      0.00
09:29:11      75    0.00    0.00    0.00    0.00    0.00    0.00    0.00 100.00      0.00
09:29:11      76    0.00    0.00    0.00    0.00    0.00    0.00    0.00 100.00      0.00I think you don't understand what i mean .
there just have ONLY ONE CORE %sys 100
the top command show average of all cpu core sys% usage
when the one core sys% is 100%
the system are very slow .
e.g: when I create a database instance used for a long time . over 2 hours
but generally it will be done at most 1 hours or shorteris any type of OS virtualization involved in this environment?

785GT-e63

Recently did an install with MSI 785GT-E63 Mobo
CPU: AMD 64 X2 6000+
RAM: 2x 2Gig Kingston
Harddrive: 2x 320Gig WD
OS: Windows 7 (64bit)
Graphic Card: On-board
Computer Case: Cooler Master Elite 310
Problem is it worked good on start up, then next day the cmos light stopped lighting along with the DVD Rom light keeps flashing and the rom won't open i rearranged the cable but the problem still persist as though the and the second hard drive doesn't detect on windows when i go into the cmos i see all the drives but it's also not making on of the drives the master to boot can someone lend me some assistance.

Quote from: snyper on 05-November-10, 02:39:15
the DVD Rom light keeps flashing and the rom won't open i rearranged the cable but the problem still persist
I had this similar problem but it seems to be random rather than consistent. Please see related post... >> https://forum-en.msi.com/index.php?topic=142851.0 <<

785GT-E63 constant crash and reboot upon startup.

Hi, I just recently purchased a 785GT-E63 mobo with a Phenom II x4 965. I swapped my old mobo and cpu (nividia mobo +Intel Core 2 duo) with those, and now I can't get into Windows. It posts ok, and then I see the WinXP logo, but it crashes and reboots just as it's about to show the desktop.
I don't think it's a hardware issue because I can boot up into Safe Mode just fine. It just won't finish booting into normal Windows mode. I've already tried a barebones boot (nothing but the hard drive connected + onboard video), and different sticks of RAM with no luck.
Any ideas?

Quote
Hi, I just recently purchased a 785GT-E63 mobo with a Phenom II x4 965. I swapped my old mobo and cpu (nividia mobo +Intel Core 2 duo) with those, and now I can't get into Windows. It posts ok, and then I see the WinXP logo, but it crashes and reboots just as it's about to show the desktop.
Do a new fresh OS installation after mainboard change

MSI 785GT-E63 CPU Help

I have the MSI 785GT-E63/780GT-E63 motherboard and I am needing to know what would be the best AMD cpu for htis motherboard. I know the AMD Phenom II X4 980 HDZ980FBGMBOX Black Edition Processor - Quad Core, 6MB L3 Cache, 2MB L2 Cache, 3.70 GHz, Socket AM3, 125W, Fan, Unlocked, Retail and the AMD HDE00ZFBGRBOX Phenom II X6 1100T Black Edition Processor - Six Core, 6MB L3 Cache, 3MB L2 Cache, 3.30GHz, Socket AM3, 125W, Fan, Unlocked, Retail will fit but which would be the best as far as being the fastest for this motherboard or can you suggest a faster cpu for this?

What do you do by the computer? Modern processors are rather powerful, and I bet you whatever you choose it will live rather a relaxed life 99 % of the time.
That said, I think if you have the opportunity and cash you should go for the most expensive processor you can. I hope that means the 6-core processor.
We usually want people to say what their PSU is, so we can laugh at them and tell them they made a bad choice: What PSU have you got?

785gt-e63 CPU VID voltages?

MSI 785GT-E63 mb, everything's set to auto, no oc'ing.
8GB of Kingston DDR2 ram, memory tested fine.
When I installed AMD Overdrive to check on voltages and things as I am getting BSOD with bug code 124 in Win 7 64 bit.
The one voltage that fluctuates is CPU VID, overdrive shows it should be at 1.400 and it fluctuates from 1.025 - 1.400, is this normal? It is now doing this with 2 different power supplies.
Current one: (Unknown Manfuacturer)
Model: PS-400W
DC OUTPUT
Max Current
+3.3V = 28A
+5V = 40A
+12v(1) = 20A
+12v(2) = 20A together both +12V = 20A
-12V = 1A
-5V = 0.8A
+5VSB = 2.5A
Other one I tried: Antec
Model: EA-380D GREEN
DC OUTPUT
+5V = 20A
+3.3V = 20A
+12v(1) = 17A
+12v(2) = 15A
-12V = 0.8A
+5VSB = 2.5A
Any ideas as to why I would be getting BSOD with Bugcheck 124?

Quote
Other than the random bugcode 124 Blue Screens the machine has been awesome.
Are there any particular usage scenarios in which those x124 BSODs appear to occur more frequently? For example: Do they rather occur in IDLE or in FULL LOAD conditions or when there are sudden transition between IDLE and LOAD states?
Quote
The one voltage that fluctuates is CPU VID, overdrive shows it should be at 1.400 and it fluctuates from 1.025 - 1.400, is this normal?
Quote
Yes CPU voltages go up and down, it's normal because C&Q does that.
As Bas said, the fact that the Core Voltage fluctates is normal. This is a power saving feature of your processor. These fluctuations should not cause any troubles under normal circumstances. That is why there is usually no reason to turn off the C&Q feature.
However, for testing purposes you can always turn this feature off, just to find out if that will yield any change regarding your BSOD problem. You are then able to determine whether or not your BSODs are C&Q related.
Quote
CPU: AMD Athlon II X2 260 Regor 3.2GHz Socket AM3 65W Dual-Core Desktop Processor
Motherboard: MSI 785GT-E63 AM3/AM2+/AM2 AMD 785G HDMI ATX AMD Motherboard
from the CMOS Setup Screen - BIOS Version: V28.7 11192010
RAM: Kingston ValueRAM 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model KVR800D2N5K2/4G (4 modules total, 2 kits)
Harddrive: Samsung HD642JJ (640 GB)
Optical: HL Data Storage Super Multi DVD Rewriter Model: GH40N
Video: Onboard ATI Radeon HD 4200
Audio: Onboard
NIC: Onboard Realtek 8111DL
The power needs of this configuration are not that demanding, which means both of your PSUs should actually to be able to handle all of your components, given of course that the specifications are correct and that both PSUs are functioning properly.
Quote
Memory Test: Running memtest86+ v4.10 from Ultimate Bood CD now with all 4 modules installed. Will run again with individual modules after if they pass.
In case you get any errors, slightly increase the DRAM/Memory Voltage to 1.95V to compensate the fact that you use four modules and counteract against the potential possibility that your board is slightly undervolting the memory.
Quote
bugcode 124 Blue Screens
Look here:
http://msdn.microsoft.com/en-us/library/ff557321%28v=VS.85%29.aspx
Perhaps that will help you to do further analysis of the BSODs. Please also check the Windows error log and look for any indication of other exceptional errors occuring around the BSODs.
Temporarily disabling some of the peripheral onboard components may also help to find possible causes (e.g. NIC, onboard sound). You could also test a stand-alone video card (with low power demands) to circumvent the onboard video adapter for testing purposes.
Furthermore, I would also disconnect the optical drive completely for testing purpose and run a diagnostic test on the hard drive using a dedicated Samsung utility.

How to enable cpu fan control and monitor

Just had this new budget PC build:
MSI FM2-A55M-E33 Bundkort micro-ATX Socket FM FM2-A55M-E33
AMD A serie A4-5300 3.4 GHz 2 cores 2 tråde 1 AD5300OKHJBOX
G.Skill ARES Hukommelse 8 GB : 2 x 4 GB DIMM F3-1600C9D-8GAO
Linkworld Mini LC727-10 Black Piano 550W 727-10-C2128 It
Windows 8 Licens og medie 1 PC OEM DVD 64-bit WN7-00401
ZALMAN CNPS 5X Performa Processor-køler CNPS5X PERFORMA
Samsung 840 Series MZ-7TD120 Solid state driv MZ-7TD120BW
Samsung SH-224BB Disk drev DVD±RW (±R DL) / D SH-224BB/BEBE
OS: win 8,64bit
Thing is i dont know how to enable CPU fan control/regulation ifd possible. Doesn't realy see anything anything in the mobo manual except mentioning AMD Cool’n’Quiet.
This fan i have installed is running fine but i thk it runs full speed all the time and that makes a lot of noise - not needed.
Thx for any advice/tip/hint

40 °C is fine. The minimum fan speed can be set is a % of the full capacity.
Start with 12.5% and if the fan needs to adjusts it's fan speed too often and it get's annoying you can raise it to 25% or more.

XP SP3 MSI 785GT-E63 crash and reboot

Whenever I start certain programs the OS crashes and restarts, and comes back with this error code;
BCCode:10000050 BCP1:FF8F0005 BCP2:00000001 BCP3:8056211D BCP4:00000000 OSVER:5_1_2600 SP:3_0 Product:256_1
I have tested the RAM with Memtest86+ multiple passes 0 errors.
It's mostly games and catalyst software. Any help would be greatly appreciated.
MSI 785GT-E63 Rev 1.0 Motherboard (BIOS 12-31-2009)
Kingston HyperX DDR2-800 2x1GB (2.0 voltage 4-4-4-12 timings)
AMD Athlon II X3 440 (not unlocked or overclocked)
HD 4200 Onboard Video
Maxtor 120GB IDE ATA133
LiteOn iHAS424 DVD SATA
Windows XP Pro SP3 32-bit
Enermax 485w PSU

Quote from: Stu on 27-August-10, 14:28:41
Bug Check Code 10000050 is also referred to as STOP 00000050 or as
STOP 0x50. The name assigned to it is PAGE_FAULT_IN_NONPAGED_AREA
Thanks, Stu
Quote from: Semprini on 27-August-10, 07:40:27
Thanks for all the great input.
These problems have been going on for the past 3 weeks since building the PC.
I am using Catalyst 10-7 version for video drivers.
I used auto timings on RAM when I first built the PC and the same problem came up, will try it again though.
The programs that cause the crash; Catalyst drivers setup(10-4 and 10-7 both cause the crash), Farcry 2 (when un-installing Farcry 2 the crash happens). If I don't start the programs there is no crash. Most types of programs work with no problem, Nero, Padus, Handbrake, AutoGK, Mozilla.
I'll try to get a BSOD code.
Enermax PSU EG495AX-VE(W) Noisetaker
I've had doubts about the PSU before but checked it with a tester and against other PSU's. I still don't trust it, maybe I'll just replace.
Once again thanks for everyone's advice.
Do you have Avast installed or other 3th party AV or firewall software?
Any OC?
Shows us screenshots from CPU-Z, all pages. ==> http://www.cpuid.com/downloads/cpu-z/1.55-setup-en.exe
How to shows images in a forum ==> https://forum-en.msi.com/index.php?topic=90789.0
Check stability with Orthos:
https://forum-en.msi.com/index.php?topic=103598.msg760534#msg760534

Can we control user request w.r.t Memory and CPU utilization in Oracle 10g

Dear All,
We are having Production with Oracle 10.2.0.4 (5 Node RAC, 32Gb RAM each) running on RHEL5.2 with 12000 Users. We have some schema say FIN, HRMS, SALES, REPORT and many dedicated users for those schemas. We need to control the user request against these schema with respect to Memory (or CPU utilization)
Suppose users using FIN schema can use Maximum 40 % of Total Memory, HRMS schema can use Max 20%, SALES can use Max 20% and REPORT can use Max 20%.
Is it possible to create any Service in Server side to handle this type of scenareo or any existing service which can be customised to fullfil this?
Please suggest me.......
Thanks,
Tusar
Edited by: gohappy on Jan 27, 2011 5:59 AM
Edited by: gohappy on Jan 27, 2011 6:00 AM

JDBC 'applications' quite often don't use persistent connections, and often do not exit gracefully by calling 'exit' or 'disconnect'.
This means the session will continue to exist.
It also means, if you don't establish any form of connection pooling and/or dead connection detection, you can throw whatever amount of memory in the server, and you will continue to report
'Now problems is coming'. Apart from crippled English, the general lesson any DBA should know is how these 'applications' operate, and, contrary to some, you can never ever fight problems caused by applications,
by throwing memory and cpu at the problem.
When I read your text, I also assume the application is not using PrepareStatement calls and not using bindvariables, this is why your 'application' is burning the CPU.
Find those 'application developers', sue them, or better still : Beat them with a whip, and have them fix their 'crapplication'.
Paraphrasing William Jefferson Clinton: It's the application, stupid!
Sybrand Bakker
Senior Oracle DBA

[svn:fx-trunk] 12865: Fix mx.controls.HTML and mx.core. FlexHTMLLoader so the participate in the current IME scheme

Revision: 12865
Revision: 12865
Author:   [email protected]
Date:     2009-12-11 13:51:27 -0800 (Fri, 11 Dec 2009)
Log Message:
Fix mx.controls.HTML and mx.core.FlexHTMLLoader so the participate in the current IME scheme
QE Notes: None
Doc Notes: None
Bugs: SDK-24391
Reviewer: Corey
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/apollo/HTML
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24391
Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/controls/HTML.as
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/FlexHTMLLoader.as

OK, Just changed the screen option in DEVICE... And now I'm getting this in my log files. When I try and install that package with pacman, it wants to remove the normal nvidia driver. Can I run one for each graphics card?
Xorg.0.log
(II) Module "ramdac" already built-in
(WW) NVIDIA(0): The NVIDIA GeForce FX 5200 GPU installed in this system is
(WW) NVIDIA(0): supported through the NVIDIA 173.14.xx Legacy drivers.
(WW) NVIDIA(0): Please visit http://www.nvidia.com/object/unix.html for
(WW) NVIDIA(0): more information. The 185.18.36 NVIDIA driver will ignore
(WW) NVIDIA(0): this GPU. Continuing probe...
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888

Need help unlocking cores in 560 be in msi 785gt-e63

help i cannot get my motherboard to unlock the additional cores
i have the latest bios dated from nov 2010 with a black edition 560 cpu
under the bios section i enable both advanced clock calibration and unlocke core and the system does not reboot i then clear the cmos and i can start all over.....enter date, time with these opyions enable the system refuses to boot with either one one i can start but on only dual cores
i dont have the iption listed in the manual as EC Firmware but i figured this is outdate late 2009 manual since the firm ware that the motherboard came with was 10/25/2010
please there must be a step or process i am missing ???? currently running windows 7 ultimate 64 with 3 gigs of memory everything else works perfectly except for the unlocking of the extra cores

Also please remember that not all cpu's will unlock.
As you state it, it looks like the locked cores are faulty, cause when you unlock them, the system doesnt want to boot at all.
I might be wrong though.

Quad core and Four core cpu's

Hi guys,
i have a silly question my macbook pro of late 2011 has Intel i7 cpu runs at 2.2 GHz and has four cores ,now my question
is Quad core and Four cores is one and the same.
Please donot lough my question.
prabh s

Thank you very much.
prabhi s

K8NGM2-FID CPU core voltage Fluctuations and instabilities-- Bad caps!!?

I Have K8NGM2-FID bought 6 months ago and started having stability issues since last month.
Here is my configuration
K8NGM2-FID ver 2.0 Bios 3.73 now, used to be 3.5, experimented both, but did not help
Onboard video, Onboard Lan, firewire
Memory : 512 x 2 Corsair DDR400 in dual channel mode at 2.65v 64MB to Video
CPU: AMD64 X2 3800+
HDD WD 160GB SATA150
Winfast TV2000 Expert Tv Tuner
Drivers, tried many version ( currently using latest Nvidia Video, MB drivers)
Now, the description of the problem.
System suddenly hangs with or without load, intermittenly. Nothing to do what we are working on. Even when System is idle.
Hangs means, it could happend two ways,
1. simply it would not respond, screen simply freezes,
2. sometimes, you simply see horizantal lines on monitor( Typically happens when cpu core voltage drops below it can handle). I know this because
I am using RMClock on my Turion laptop, and when we try to find lowest stable voltage we see this behaviour.
Now, some other observation, from the day one CPU core voltage has been fluctuating a lot. Used to fluctuate anywhere between 1.37v to 1.304v( at default 1.35v). But still has been stable. Ran 24hour prime95, so no problems.
Recently I am seeing voltage fluctuations is more, as low as 1.28v to 1.39v at default 1.35v, so I tried RMCLock and raised the voltage to 1.4v, but it seems that did not help much.
Now, As per the MSI PCALert4 voltage is changing anywhere from 1.28v to 1.38v, but also I get core voltage field empty( that is right no CPU core voltage shown) and alarm sounds. It seems, CPU does not get voltage at all and gets very low voltage for a second or so.
Things I tried, Changed the powersupply, changed the Memory, but no use. I am lucky enough to have exact same configuration I built for a friend. So, I checked voltages on his PC and I do not see this behaviour.
Now, I ran out of options.... any idea anyone had similar problem, and if they solved?
Now, here are PCAlert 4 images
http://img171.imageshack.us/my.php?image=128vatdef135sp5.jpg
http://img256.imageshack.us/my.php?image=novoltageif5.jpg
http://img406.imageshack.us/my.php?image=132vredbi3.jpg
Also, another weird behaviour with Bios, even when I change setting in bios, they did not take effect, even loading default does not help, so I have to press CMOS reset button.
Any help will be appreciated.
Thanks

Thanks for the quick reply.
First to clarify, these things has been developed a monrh ago only. It has been fine for more than 5 months.
1). Yes Memory is insalled in closest DIMM sockets to CPU,
2). I think you mean mem voltage. The memory I have is Corsair Value series and it even runs fine DDR400 at 2.55v, but I bumped it to 2.65v and also tried 2.75v ( 2.65v is typical I have been using with this MB).
3). Memory has been tested with Memtest for 24 hours and ran Dual Prime95 for 24 hours when system is assembled.
Also swapped from another PC I built for my friend with same components( same corsair value series memory) Also tested my memory on his PC, no probs. BTW I also tested my memory at 333, freezing even happens even at that speed.
4). PSU has nothing to do, because I have been monitoring all PSU rails with SPeedFan none of of the rail voltages moved at all. I even monitored with Digital Multimeter to ensure. Anyways I even tried 3 psus, one ANtec 350W smart power supply, ThemalTake 420W, Ultra 400 Watts. All have more than enough juice to power this setup. (onboard Graphics card).
5). Yes, freezing happens in simply desktop too. Nothing to do with CPU load or graphics load. It could happen even when just idling.
6). I use stock CPU cooler in Antec 1650B case with 120MM Fan running in the back( approx 50cfm) and CPU temp never exceeded 47c and MB temp typically around 28c and NB temp around 50-60c using a digital probe and 55-70c using Nvidia Monitor based on load vs no load.
7). As per Dual core patches, I applied AMD Dual Core optimizer quite a while ago. As per the MS Patch, No I have not applied( But I doubt it helps because it has been stable without that for all these months). I may try that.
Now, what I am trying, I disabled CNQ, and logging Core voltage fluctuation with speedfan( no monitoring).
as of yesterday night the core voltage was varying from 1.28v to 1.39v( I think that is insane 110mv fluctuation in CPU core voltage!!?) at default CPU voltage of 1.35v. BTW it has nothing to with CPU load, all these logs generated when it was idle. I remember fluctuation even when MB was new, but lowest I observed was 1.304v.
SOmehow, I suspect VRM is pretty bad on this MB.
Anyways, see the response and let me know if you think I am missing somethings. Appreciate your help.

P965 Platinum and E6700 CPU Core v ?

Just a question.
What is the default CPU Core V on the P965 Platinum board when you just unpack it first time ?
I just want to know because i just installed my board directly with my new E6700 CPU on without checking the CPU core v first.
I never touched it, but i'm afraid its wrong. Maybe i have to chance it my self for the right setting.
So my question is really. Is the default CPU core v on the P965 Platinum alright for a Core 2 Duo E6700 CPU or should it be chanced
to the CPU the user are using with the board.
Thx

1.265V for mine...

785GT-E63 and cpu core control

Similar Messages

Maybe you are looking for