790FX-GD70 & 3TB Drive Trying to install windows 7 64 bit

Hi,
I've had this mother board for 2 years now, works great! Use it primarily for gaming, but it can handle anything I can throw at it... Until I got a 3TB SATA HDD... Well I learned rather quickly what I needed to do to be able to see the entire 3TB, which I got it partitioned and that's done. But it was a GPT (GUI Partition Table) which windows can't be installed to... or that's where I get hung up...
Well upon googling my butt off, I've learned of UEFI, which I'm not sure if my board is UEFI compatible? I guess is my question... or can someone tell me how to install windows on a 3TB HDD with this motherboard? I want to use the smaller of the 2 partitions...
Let's see... My specs are:
AMD Phenom II x4 965
16GB DDR3 PC10666
500GB SATA HDD
3TB SATA HDD
XFX HD-489X-ZSFC Radeon HD 4890 1GB 256-bit GDDR5
MSI 790FX-GD70
Thanks!!!

yes both are on the board UEFI BIOS type and 3TB+ infinity is part of the boards featurs for 3TB drives to contain an OS but the 790FX-GD70 like we have does.t have these features on the board!
only the newer ones like the 990FX or 990X series boards have both these features.
3TB+ infinity is a GUI that works as a way of circumventing the 2TB max size of a OS drive and allow it to be formatted in such a way to trick an OS into installing on a GPT format drive instead of MBR one!

Similar Messages

Trying to install Windows 7 with Bootcamp on my Macbook with a faulty CD drive

I am trying to install Windows 7 with Bootcamp on my Macbook A1278 (OS 10.6.8) with a faulty CD drive (CDs and DVDs get stuck in it and I had to get it removed in an Apple store, so I don't want to use it anymore). I have got a licence for the product but I am only in possession of the ISO, is there any way to install it using a USB stick?
I don't have many options while launching Bootcamp, only
"Download the Windows support software for this Mac" but when I try I get a message explaining me that the download could not continue as the software is not available,
or
"I have the Mac OS X installation disc [...]" but obviously I can't use my CD drive so this is not an option. I tried it anyway and I created a Windows partition but when asked to "start the Windows installer", I can only continue by insering a CD.
I tried to use a USB stick and added the ISO on it but nothing has changed.
How can I install my copy on Windows?...

BobTheFisherman > Hem, yeah, that is stating the problem and not working toward resolving it.
Turbostar > I checked the link and it seems to be relating to the first video I have seen on the subject. I tried to install Tuxera then to work with rEFIt, but I did not get any result yet (I don't know if I am doing something wrong during the USB writing process as many different ways are explained on different websites).
So far my last try was to launch Windows 7 USB DVD Download Tool on VMware Fusion but it the only disk shown is A:\ Removable disk (not the name of my USB) and it is stated that the disk is being used by another program, even though it's not open on the Mac side.
Some websites are advising to write the copy of windows on a USB via a PC and then launch it on the Macbook, so I might try that in the next few days. I will keep you updated.
If anyone has another option I might not have think about, or an advice on how to efficiently create a bootable Windows setup USB with my Mac, please let me know!

HT3986 This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue. "' Can someone help me . ?

This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue.

pump

Have new MacBook pro tried to install windows 7 failed cant get DVD out of drive

Tried to install windows 7 using boot camp message said can't install on any of the partitions can't get DVD out to restore eject button doesn't have any effect is there a key combination to eject dvd

First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
Open Disk Utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
Restart the computer while holding down Command-Option-O-F, to enter the Open Firmware prompt. Type "eject cd" without the quotes, and press return. The disk ought to eject. To start into OS X, type "mac-boot" without the quotes. Press return, and the computer will continue with the startup. (This will not work on an Intel Mac. There is no Open Firmware on Intel Macs. )
If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

I am trying to install windows 8 at my macbook air boot camp

I am trying to install windows 8 at my macbook air boot camp but Boot Camp Assistant i showing an error that the disk cannot be portioned because some files cannot be moved. Back up the disc and use disk utility to format it was a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistant Again.
I had already installed teh first time Windows on my MacBook Air and Mac Book Pro. Actually I had more issues to install on the pro than Air.
But my Macbook Air had an issue on November 2013, 3 weeks after buying it and Apple gave me a new MacBook Air but they only transferred the information on my mac and the windows partion was lost according to them, they could copy it in to my new MacBook Air. Now that I am trying to install my windows I can not access to the aprtion section and get the error message from above.
What can I do to to install it? I am using a 32GB USB and OEM Windows 8 at USB External Drive. The same I used before. I dont know understand what changed if I did it before?
Please advise..

I think there's some remmants left over from when Apple transferred stuff over. We can try a quick fix, but if that doesn't work, I think the only option is to clean install OSX and then install Windows.
open disk utility, confirm that you only have 1 partition (mac journaled)
restart and PRAM reset
open disk utility and repair permissions twice
restart boot camp assistant
Does it work?
If not, I would boot holding command+R, choose disk utility from the menu and completely erase your HD (formatting it as mac journaled again). Then, install OSX on this HD. Once OSX is installed, don't copy your files over from the backup yet. Instead, start boot camp assistant and see if you can get Windows installed. You can copy back your other files after we get Windows installed.

I am trying to install windows 7 to my Macbook pro with bootcamp but every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7", any solutions ?

Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?

Was your Bootcamp info.plist manipulated to change any options?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

Trying to install Windows on a partition of second internal HD

Hello,
As the title mentions, I'm trying to install Windows on my iMac 11,1 in which I've swapped out the Superdrive for a SSD.
My current setup is with 10.8 boot drive + recovery partition on the SSD and an HFS+ data partition on the second drive (HDD).
What I would like is for the SSD to contain the same partitions, but for the HDD to also include a bootable Windows partition.
Two problems with this:
1. The computer won't boot from a USB drive so I can't make a proper installer (out of the legal Windows 7 .iso I have).
The two ways around this I have read about (and tried) are to use virtualization to convince the installer it's running from a CD and not an .iso and to put the install files on a separate bootable partition of the internal drive. I managed to use Parallels 8 to install Windows 7 to a second partition on the HDD (though it couldn't make some writes due to security issues), but couldn't make it bootable. I tried making a hybrid MBR (using gdisk) on the HDD before installing Windows 7 to the partition, which made it bootable, but Windows got stuck before it loaded. This leads into problem #2.
2. The HDD doesn't know how to boot itself. My suspician is that the bootloader and/or BIOS emulation code (I don't really understand how this works) doesn't exist on the HDD. I have no idea how to fix this issue.
Any help would be appreciated in getting this to work. I'm familiar with the command line, so don't be afraid I'm going to wimp out if you ask me to use it.

My understanding of how Bootcamp works is it creates a hybrid MBR that uses GPT in each section.
I tried last night to install Windows using Parallels 8 on a partition of my SSD created by the Bootcamp Assistant. However, Windows still wouldn't boot. I then tried to edit the MBR myself using gdisk, leaving me with the windows partition not even showing up in in the UI after I hold option at startup.
Here's the output from fdisk:
~ # sudo fdisk /dev/disk0
Password:
Disk: /dev/disk0          geometry: 31130/255/63 [500118192 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 - 1023 254 63 [         1 - 461055999] <Unknown ID>
*2: 07 1023 254 63 - 1023 254 63 [ 461056000 -   39061504] HPFS/QNX/AUX
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
~ # sudo fdisk /dev/disk1
Disk: /dev/disk1          geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 - 1953525167] <Unknown ID>
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
Here's the output from gpt:
~ # sudo gpt -r -vv show disk0
gpt show: disk0: mediasize=256060514304; sectorsize=512; blocks=500118192
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 500118191
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 460383864      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
460793504     262496
461056000   39061504      3 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
500117504        655
500118159         32         Sec GPT table
500118191          1         Sec GPT header
~ # sudo gpt -r -vv show disk1
Password:
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: PMBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
       start        size index contents
           0           1         PMBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1951845952      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1952255592     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1953525128           7
1953525135          32         Sec GPT table
1953525167           1         Sec GPT header
And diskutil:
~ # diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Jane                    235.7 GB   disk0s2
   3:       Microsoft Basic Data                         20.0 GB    disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI                         209.7 MB   disk1s1
   2:                  Apple_HFS JaneHDD                 999.3 GB   disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
Any suggestions?

Trying to install windows through bootcamp - now i'm screwed...

Ok so bought my very first mac yesterday and it has been a joy for the first 48 hours...sarcasm. I was trying to install windows xp - sp2 on my mac that has the latest and greatest version of leopard on it. Used boot camp to set up partition and was prompted to insert windows installation cd...all seemed to be running smoothly...until: the installation "completed" said that it needed to reboot to complete installation and that if there is a floopy disk in drive a:, to remove it. (***? there is no floppy disk on macs anymore...) so my computer will restart and goes to a page that says to press any key to boot from cd...ok 1)if I do press a key it leads be through the entire installation all over again and then reboots and we start again with the press any key to proceed with installation part...or 2) don't press any key and the it says "disc error, rebooting computer". so I thought that maybe i should just use parallels instead of bootcamp until I could research a bit more, but now since i can't get the computer on, it won't eject the cd - and unlike a pc, there's no button to make it eject no matter what...tried holding mouse key while shutting down and rebooting and it won't budge...
can someone please help me?? (btw - i'm writing from my problem-less pc)...i really don't want to regret the mac...

I'm a new macuser too (2 weeks). Try this. Turn off the compter and then, restart and hold down the OPTIONS key. A menu choice showing a hard drive should come up on the screen (and nothing else), this is the mac hard drive. Click on the arrow below the HD and it will boot into the MAC OS. Then, eject the CD from the mac OS. I think that should work.
I didn't have any problem with XP installation in boot camp, used a 32 GB partition (thats the max for FAT32) and used fat32 so I could access windows files with mac programs.

IMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso

iMac (27-inch, Mid 2011) 2.7 GHz Intel Core i5 4 GB 1333 MHz DDR3 running10.10.2 (14C1514). Trying to install Windows 7 64 bit from an install disc. When attempting to create an ISO image I can save the file in disk utility but can convert cdr to iso. I select the file and the hit return as in step 8 of the Creating an
iSO image document but the box that should open to select use iso does not open. How should I proceed?

The Mac SuperDrive built into your Mac is the Optical drive.
1. Insert your Windows DVD in Optical drive. Disconnect any external storage.
2. Insert a USB2 Flash drive. This will be used to hold the BC drivers.
3. Start BCA. Check the options to download software and Install Windows. You do not need to download Windows. The BCA will download the BC drivers to the USB.
4. Partition your drive.
5. You can see the Windows installer screens at https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2.

Stuck trying to install Windows 7 Ultimate on X120e (Help please)

I just got my x120e yesterday and it came loaded with Windows 7 Home Premium. Since my college offers free Windows 7 Ultimate I decided I would go ahead and install that, plus since I bought the computer used I figured that would be a good clean start. So I downloaded the software and used the windows tool to put the .iso file onto a thumb drive.
When booting the x120e with my thumbdrive inserted it goes into the windows installation guide. The problem starts where it asks how I want to do the install, Upgrade or Custom. From the directions online and using google it seems I am suppose to select 'Custom' install. Then it asks where I want to install windows: Disk 0, Partition 1(system_drv); Disk 0, Partition 2; Disk 0, Partition 3(lenovo_recovery). When you highlight Disk 0 Partition 1 or 3 it says 'Windows cannot be installed to ...'. Disk 0 Partition 2 includes the bulk of the storage size, but when I highlight that one and click 'next' it comes up and says 'Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information'. Also, I am unable to find anything called 'setup log' to get more information.
* I did format the Disk 0 Partition 2 after it didn't work the first time
I decided from googling that maybe I needed to add a hard drive driver in order for it to work. So I went to the Lenovo driver page on my other computer and put that on the thumb drive and loaded the driver in the windows install wizard. This had no effect though and the problem is still there.
Given I've never loaded an OS before so I'm relying on online instructions and google. I have literally spent close to the last four hours working on trying to install Windows 7 Ultimate onto the x120e and am going to get some sleep and try again I guess.
* I haven't changed the hard drive or anything, this is using the original 250gb hard drive it came with
UPDATE: after getting a reply to this question on another forum, they said "Delete all the existing partitions you see. Start the install on the unformatted partition. You will lose your recovery partition (the lenovo setup with Win 7 Home Premium)."
So I did that and now the only line that shows up is Disk 0 Unallocated Space, 232.9GB. However when I click Next the same warning appears as before "Setup was unable to create a new system partition or locate an existing system partition...". Additionally the options of Delete and Format are no longer there, only Refresh, New, and Load Driver. Any more help on what to do? thanks

http://www-307.ibm.com/pc/support/site.wss/TVSU-UPDATE.html
This program will download everything you need automatically.

Trying to install Windows 7 on Mac Mini Mid2011

Am trying to install Windows 7 on Mac Mini (Mid 2011) OS X Mountian Lion (10.8.2) - 2.3GHz/i5/4GB/500GB with external optical drive attached. Using Windows 7 Ultimate (on USB Flash Drive) and Windows Support Software (on separate USB Flash Drive), as the external optical drive is not recognized when Boot Camp restarts to begin installation process. Here are some issues I am having:
Going through BCA, when selecting the new partition to install on (Disk 0 Partition 4 BOOTCAMP), the warning of "cannot be installed...", so I select Drive Options (advanced)/Format. Drive is reformatted to the NTSF, but loses the BOOTCAMP name. (Reformats to UNTITLED);
Installation of Windows 7 proceeds, until after its third restart and the color bar with the light burst at its center appears at the bottom of the screen with messages stating "Preparing....". The computer then reboots and starts this endless boot loop.
As it never gets to the part where the Windows Support Software is engaged, can I have both the Windows 7 Ultimate installation and the WSS on the same USB?
I have been researching this issue, but with no difinitive solutions (other than snarky "You obviously didn't read the prior post for this issue..." & "Don't people READ previous posts?" responses.), other than one rude reply saying this was a known issues and there is a fix/driver for it, but no reference as to where this fix resides.
Please if anyone has a solution, I would be very grateful for serious and considerate answers. If you feel the need to be rude/snarky/downright unhelpful, don't reply. This is a community help page, not your venting page.
Thank you in advance for all serious replies.
JAMinard

Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea.

Trying to install Windows 7 without Superdrive

It turns out that my superdrive kind of died, so I'm using an external optical drive. I tried to install Windows 7 from the DVD on my iMac 11,1 using Boot Camp, but after it created the partition and restarted my computer, all that I'd see was a black screen and an error: "No Bootable Device -- Insert boot disk and press any key".
I learned that it's almost impossible to install Windows from an external optical drive, so I created a bootable USB drive using an ISO image of my Windows 7 DVD (and only after doing a lot of tricks into the Boot Camp Assistant plist file). Then I did the same than before: Boot Camp Assistant, Install, Restart, black screen and error.
Then I installed reEFIt, so I pressed alt during the start screen and all that. I tried selecting the USB drive from there, but again I got the **** black screen.
Is there anything else I could try? And please, buying a new superdrive is not an option.
Thanks in advance.

You're wrong. I've used the same DVD to install Windows on my iMac in the past, and it worked flawlessly.
Anyway, just to be sure, I downloaded a new ISO (yep, I checked and it was bootable) and tried to create a new bootable USB drive. It didn't fix anything.
I booted from reEFIt and there were several options. I selected bootmgr.efi and all I'd see was a black screen with a reEFIt error: "unsupported while loading bootmgr.efi". If I just select Windows from the USB drive I get again the black screen with the "No Bootable Device -- Insert boot disk and press any key" error.
I don't know where the issue is, to be honest. It looks like Apple messed up with the firmware and there is no easy way to boicot the need of a shi**y superdrive.

Trying to install Windows 7 on iMac Mountain Lion - Pain

Hey all,
I am having hard times trying to install Windows 7 (64 bits) on my iMac.
Have followed every steps (Boot Camp and Apple guides, checked the forums here, etc.); made the partition, downloaded the drivers onto an empty and FAT formatted USB hard disk, etc., and all that worked fast and easy.
The problem starts when it comes to install W7 (Superdrive built in so it's in a DVD): after I choose the language, right away it says "No drivers found". It supposes to ask for the drivers after the installation but it does the opposite. I have checked the drivers one by one and it recognizes some of them, but when it tries to load them a new windows pops up repeating the same "No drivers found" thing.
I even modified Boot Camp so now it can burn a ISO image onto a USB drive. Downloaded and tried another W7 version but it was worse ("no bootable device" message...)
Have checked many other threads like this, vids, etc., but have found no solution so far. Apple's help definitely *****... And this supposes to be cake. Have spent days on this and nothing.
Just in case, all I have used on this is Boot Camp (updated, 5.0.4) and everything else on my computer is updated also. Don't have any VM, nothing like that.
Don't know how to solve this and install Windows on my computer. Please somebody help me. I am far from being a tech so will appreciate your patience on descriptions. Thanks!

There are various guides for installation and compatibility on the Apple support site for Bootcamp, did you download and read them?
I have only installed Windows once with Bootcamp, that was Windows 8, I followed the instructions and it worked ok but there seems a few items that you need to be aware of, it is all in the manuals, Apple suggest you print them off for reference.
That is about as much as I can tell you.

Trying to install Windows with Bootcamp

Hello. First, I do know this has been a recurrent trouble for a lot of Mac user who have tried to install Windows using Bootcamp. Believe me, I've looked it up both here in the Apple Communities and in saint Google. My situation is, however, that I have replaced my optical drive with a SSD, and now my optical drive works externally, via USB. Everytime I try to install Windows in a dedicated partition in the SSD, it just stays forever in a blank screen with blinking cursor.
Apple's troubleshot won't work for me, and I'm beginning to think that the issue has more to do with the optical drive itself. I tried:
To install Windows on the HDD instead of SSD.
To unplug every USB (even mouse), except for the optical drive with Windows 7.
To install it via USB stick (creating a bootable .iso with Disk Utility). In this case the usb stick does not even appear when holding option key.
To try another Windows 7 version (32/64 bits).
I have even read it might be because of a bad installation of the RAM memory... this makes no sense?!
If anyone has encountered this same situation, I'd appreciate some help. Hope I can get this done, because Steam's Age Of Empires won't ever work in OS X :S
Thank you all for reading and helping!
MacBook Pro
13-inch, Early 2011
2,3 GHz Intel Core i5
8 GB 1333 MHz DDR3
OS X 10.9.5

If your Mac was originally configured with a built-in Optical drive, and it was later replaced, Bootcamp knows your original configuration and will not work properly in the modified configuration, because it uses your Mac's model string (found in About This Mac -> More Info -> System Report -> Hardware) for example, MacbookPro 11,3. The only supported method to install Windows is to restore the original HW configuration and install it and then move hardware around.
Please see Unable to Install Windows 8 on secondary Hard Disk .

790FX-GD70 & 3TB Drive Trying to install windows 7 64 bit

Similar Messages

Maybe you are looking for