790FX-GD70 winki Bad bios checksum (please help!!) unresolved

I have the 790FX-GD70 winki edition motherboard only for a few weeks, then i went on holiday for a week and when i came back and started up the computer it came up with the error:
Bad BIOS checksum. Startin BIOS Recovery ...
Checking for USB Devise ...
Reading file "A7577AMS.2xx"
but then it does nothing, iv tried puting the bios files for the winki edition and the normal edition onto a USB pen but it just comes up with that error and doesnt get past it.
My Specs Are
AMD Phenom II X4 955 Black Edition
790FX-GD70 Winki Edition
Sapphire Radeon HD 4890 2GB Vapor-X
Kingston HyperX Triple Channel Kit - memory - 6 GB ( 3 x 2 GB ) - DIMM 240-pin - DDR3
Western Digital WD10EADS Caviar Green 1tb SATAII 32Mb Cache
1TB Wester Digital
Ezcool 700W PSU
Iv been trying to fix this for a week and nothing will work.
cheers

Quote from: eminem2o4 on 07-October-09, 05:13:05
i just tired clearing it with the jumper(you dont have to press the button when you swich the jumper do you?) and it is  still coming up with the same error
Bad BIOS checksum, Starting BIOS Recovery
I really dont know what to do?
and could any1 give advise on good 6gb AMD RAM?
cheers
Quote
and could any1 give advise on good 6gb AMD RAM?
Such combination is not recommended in AMD systems as you must use 2x2GB and 2x1GB memory stick to obtain it.
Which is not good idea[mixing memory sticks]
For best results and optimal performance, use 2x matched memory sticks only.
Quote
I really dont know what to do?
Go to reseller to sort for you.
Let him try with different memory sticks{AMD Tested}.
The message may gone by itself, often such fake message can come from bad or not compatible memory stick.
Quote from: Hans on 08-October-09, 01:14:27
Make sure to change the extension to .ROM.
Nope, system is expecting original file name A7577AMS.200 as Bas mention as well.
Quote from: Hans on 08-October-09, 01:26:19
Ah, I see. Thought it needed a .ROM, but I'm obviously wrong.
But if we already knew this, what's this whole topic about then?
Get the file on a stick and make it recover. Can't be that hard... ???
Quote
Get the file on a stick and make it recover. Can't be that hard... ???
I would suggest to try with AMD regular memory stick 1st before attempt any BIOS recovery.
Else he really can kill his board, while attempt to recover healthy BIOS{Too possible to be memory error and not BIOS failure
[bad|not compatible memory stick can produce the same fake message.]
Also BIOS hardly can corrupt to this stage by itself, he tell never touched the BIOS:
Quote from: eminem2o4
and no iv never tried to flash the bios before, and no1 was near my comp when i was away

Similar Messages

  • Bad BIOS Flashing - Please Help !

    Hello,
    I'm having a serious trouble because the BIOS UPDATE failed since I had a power outage while I was updating the BIOS.
    Since that, I couldn't get any video output, it's only 8 beeps with the orange light, and then the blue light and nothing happens. Is there a way to prepare an USB KEY with the BIOS updates, initiating the CPU with the Windows+B keys pressed on?
    I've tried to apply the BIOS UPDATE SP63535 who had the BIOS version ANP_704.bin
    Please HELP ME, thanks a LOT !!!
    Klaus

    Hello @klausbert,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how your desktop computer is not able to get any video output, and I would be happy to assist you in this matter!
    To further diagnose this issue, I recommend following the steps in this document on Recovering the BIOS. This should help restore the BIOS back to factory defaults.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HI YANN/VADIM...Still having problem in BADIs...please help me out

    Hi Yann/Vadim,
    Facing a problem in BADI can u please help me out...
    I am implementing sourcing dashboard.
    I am facing problem while implementing the badi BBP_ECS_PO_OUT_BADI in SRM. and BBP_PO_INBOUND_BADI in R3.
    i have written following code in BBP_ECS_PO_OUT_BADI in SRM
    method IF_EX_BBP_ECS_PO_OUT_BADI~BBP_B46B_PO_OUTBOUND.
    data : ls_item type BBP_PDS_PO_ITEM_D.
    data : w_customer_fields type BBPS_IF_CUSTOMER_FIELDS_PI.
    move 'POITEM' to w_customer_fields-refobject.
    move 'CATALOGID' to w_customer_fields-fieldname.
    move ls_item-catalogid to w_customer_fields-container.
    append w_customer_fields to ct_bapi_customer_fields.
    endmethod.
    i have created field zsrmcatalogid field in R3 in EKPO table.and i am now implementing the Badi in R3 for BBP_PO_INBOUND_BADI .....in extended classic scenario.
    i have written following code in R3 BADI
    method IF_EX_BBP_PO_INBOUND_BADI~BBP_MAP_BEFORE_BAPI.
    data : wa_customer_fields type bbps_if_customer_fields,
    wa_bapi_te_mepoitem type bapi_te_mepoitem,
    wa_bapi_te_mepoitemx type bapi_te_mepoitemx,
    wa_extensionin type bapiparex.
    data : txt_960(960) type c.
    read table bbp_customer_fields into wa_customer_fields with key
    refobject = 'POITEM' fieldname = 'CATALOGID'.
    if sy-subrc eq 0.
    move wa_customer_fields-container TO
    wa_bapi_te_mepoitem-zsrmcatalogid.
    wa_bapi_te_mepoitemx-zsrmcatalogid = 'X'.
    endif.
    clear txt_960.
    clear wa_extensionin.
    write wa_bapi_te_mepoitem to txt_960 left-justified.
    wa_extensionin-structure = 'BAPI_TE_MEPOITEM'.
    wa_extensionin-valuepart1 = txt_960(240).
    wa_extensionin-valuepart2 = txt_960+240(240).
    wa_extensionin-valuepart3 = txt_960+480(240).
    wa_extensionin-valuepart4 = txt_960+720(240).
    append wa_extensionin to bapi_extensionin.
    clear txt_960.
    clear wa_extensionin.
    write wa_bapi_te_mepoitemx to txt_960 left-justified.
    wa_extensionin-structure = 'BAPI_TE_MEPOITEMX'.
    wa_extensionin-valuepart1 = txt_960(240).
    wa_extensionin-valuepart2 = txt_960+240(240).
    wa_extensionin-valuepart3 = txt_960+480(240).
    wa_extensionin-valuepart4 = txt_960+720(240).
    append wa_extensionin to bapi_extensionin.
    endmethod.
    But its not working...
    The PO details are not passed from SRM to R3.......
    PLEASE CAN U GIVE ME EXACT CODE FOR CHANGES TO BE MADE IN THIS BADI ..AS IT IS NOT WORKING...
    Can anybody help me regarding how to debug the BADI in R3.
    Thanks in Advance...

    Hi Ravi,
    You can transfer the standard SRM catalog ID field to R/3 tracking number field (if not already used for another purpose) in the R/3 PO.
    This will avoid to implement the R/3 inbound bapi.
    Here is an extract of the code.
    The ECS PO badi example was here used to transfer the unlimited delivery flag to R/3 PO for a Z combination of criteria as well as the transfer of <b>catalog ID</b> to <b>tracking number field</b> in R/3 PO :
    method IF_EX_BBP_ECS_PO_OUT_BADI~BBP_B46B_PO_OUTBOUND.
    update unlimited delivery flag in R3 PO for combination of vendor +
    Product Category maintained in the bespoke table ZUD_PC_VNDR ..
      LOOP AT ct_bapi_poitem INTO ls_bapi_poitem.
        lv_tabix = sy-tabix.
        IF ls_bapi_poitem-po_item IS NOT INITIAL.
          READ TABLE it_item INTO ls_item
               WITH KEY number_int = ls_bapi_poitem-po_item
                          del_ind    = ' '.
          IF sy-subrc = 0.
    Set Unlimited delivery Flag
            read table li_zud_pc_vndr into ls_zud_pc_vndr
                            with key partner       = ls_partner-PARTNER_ID
                                       category_id = ls_item-category_id.
            if sy-subrc eq 0.
              ls_bapi_poitem-UNLIMITED_DLV = 'X'.
            endif.
    Set the Dummy catalog.. entry..
            if ls_item-catalogid eq c_dummy.
              ls_bapi_poitem-TRACKINGNO = c_noncat.
            endif.
            ls_bapi_poitem-GR_BASEDIV = ' '.
            modify ct_bapi_poitem from ls_bapi_poitem index lv_tabix
                          transporting UNLIMITED_DLV TRACKINGNO GR_BASEDIV.
          ENDIF. "READ TABLE it_item ..
        ENDIF.   "IF ls_bapi_poitem-po_item ..
      ENDLOOP.   "LOOP AT ct_bapi_poitem ..
    endmethod.
    Kind regards,
    Yann
    PS : please do reward helpful answers ))

  • MOVED: BIOS PANIC---Please Help!!! (Amd athlon Xp2100+)

    This topic has been moved to  AMD Socket A Forum
    BIOS PANIC---Please Help!!! (Amd athlon Xp2100+)

    ...OK...you're in the wrong forum but here's what happened...your FSB was set to 100 after you flashed...correct setting for 2100+ XP is 133 (2 X 133 = 266MHz)...

  • Flashing Pixels (Bad Video) Apple please help!

    I read another topic about this (which has been archived without being answered) POST: http://discussions.apple.com/thread.jspa?threadID=1174473
    I have these incessant flashing Green/blue pixels in windows through boot camp which makes it intolerable to use. It does this with the built in display but not with the extended display which I use on 270 degree orientation so I can't use that instead.
    Seems to be a huge number of people in that post with this complaint and my situation fits it exactly. It used to work fine and at some point (not sure which update exactly due to infrequent use at the time) it went bad. Nothing I do will fix it. I've even wiped the HD, repartitioned, reinstalled windows on boot camp and then restored my OSX with Time Machine... Allot of hassle for no results. Only saving grace was Time Machine with the OSX side of that effort.
    I want to know why apple refuse to even comment on this and maybe offer some thoughts on this? Maybe a fix even? Instead of locking the topic and shutting us up instead of working with us. What's next? A cover up to hide the fact? Maybe Apple should just delete the complaints from the support forums.
    Apple, please help, this is beyond tolerable and I need boot camp for a couple of Windows Only apps. If I had a choice I would defiantly use OSX versions.
    Just a side not. When I wiped the HD and went to reinstall form the backup the OSX installer recognized the destination and source but refused to run the restoration. I shut the whole thing down and started again and it worked fine.
    Apple please help!

    I'm having the same problem, I thought that Leopard's Boot Camp would fix it but it didn't work.

  • HP Pavilion dv6-7023tx Entertainment Notebook PC bios failure please help

    I have hp pavilion dv6 7023tx notebook pc, I installed a bios update from hp.  After rebooting it wont start. only balck screen showing, no beep sounds no blinking lights (caps lock)  ,  i tried everthing using usb key pressing windows + b key and nothing worked.. please help. thank you.  

    @prabu93 
    Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
    Thank you,
    Omar
    I Work for HP

  • Bios Downgrade please help

    Hi
    First of all sorry for my english...ok...I have a problem on my probook 6550b with which I have been dealing for two days now...i format my disk install a fresh copy of Win 7 ultimate 64 bit...I download al the drivers and update my bios...comp starts to working slowly,like laggy...i updated win with all the updates, use nod 32, scan everything, use speedupmypc etc...everything loks ok, but computer is still very slow...so i format again...do the same thing again...no results...So I assume that the problem is in the new version of BIOS...and here are my problems start...i tried do flash with older version but it wound let me(failure) I tried with windows key + b + power button holding 3 sec...i get black screen, fan starts to spining at ful, but nothing happend(i wait for 3min,3 times), and then i cannot power down comp unless i take my battery out..so my question is, is it posible to flash backwards on my laptop, or am i risking to brick my comp?????
    PLEASE HELP!!!

    Hm, @Manjunath, does what you suggest actually downgrade the BIOS or simply reset bios settings to the factory default settings? I understood that a BIOS downgrade is not possible in all instances, though this would be clearly stated in the BIOS release notes if a downgrade is not possible after the update.... So if there is no such downgrade warning/statement in any BIOS release notes between the current BIOS and the desired older BIOS, it should be possibly by simply running the HPQFlash.exe with the older BIOS and accepting the prompts/warning that the new BIOS is older than the current BIOS (i.e. a downgrade). If there was a warning/statement in the release notes of a any BIOS between the current BIOS and desired older BIOS, then it wont be possible without specialist tools, software and/or effort (if at all)!

  • Bios locked, please help

    bios is locked on hp 14-b017cl,  the code its showing is  [ 51389507 ]. please help  
    This question was solved.
    View Solution.

    Hi,
    Enter:      44081529
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • GT60 0NC: Find a unlocked BIOS! Please help me!

    Hello Svet,
    BIOS: E16F3IMS.30M
    Firmware: 16F3EMS1.412
    Just googling <- I can't get it. 
    Find the BIOS for memory upgrade and overclocking(also using EFI Function) <- yes... I need fully functional BIOS.
    Please... Can you help me? 
    (Sorry, I can't english very well... I'm writing by translator... )

    Quote from: engineeredgear on 18-November-12, 00:42:34
    ok. I'll be waiting.
    fn key? no. thanx. 
    ('cause... my keyboard has east-asian functional... that's ok~ )
    oks, check PM

  • 3gs no service after updating to ios 5 tried network reset, reset all settings and even restoring from back been with out phone for 3 weeks now need help telus cant find network problem and apple has bad customer support please help!!!

    my 3gs has no service after updating from ios 5 tried resetting network settings, resetting all settings and restoring from back up on itunes.
    telus cant find any network problems and apple is difficult to deal with.please help 3 weeks with no phone and $70 a month not happy.

    I have been having a similar problem for the last few days.Without warning the signal will just completely duck out leaving the device searching for several minutes before settling on a no signal message.
    Sometimes restarting the device, toggling data and 3g settings or toggling Airplane Mode will set things right. However, a lot of the time I've been left without a working phone.
    I don't believe this is a SIM issue, as I had to change my SIM only one month ago for another signal related problem. Again any help would be appreciated here as well.

  • I have a REAL BAD situation. Please help me.

    Okay, i was changing display settings on my mini. i am on tiger 10.4.4
    My normal setting is 1020 X 740.
    I scrolled down, and accidentally clicked the last setting, way to high for my monitor!
    and now, my mac will not display ANYTHING!
    i turned it off, and did a safe oot by holding down the shift key, and everything looks good, so i went to but the resolution at its LOWEST. a gauranteed working setting!
    So i restart it and it is coming up in NORMLA BOOT.
    I still can't see anything. the resolution is STILL too high!
    How can i change my res?!
    it tried the safe boot, now what!
    please help, i had to drag out a dell to type this!

    PRAM stores certain system and device settings in a location that Mac OS X can access quickly. Exactly which settings are stored in the computer's PRAM varies depending on the type of computer as well as the types of devices and drives connected to the computer. Parameter RAM is a small area of non-volatile RAM (NVRAM).
    Some information stored in PRAM includes:
    Display and video settings such as refresh rate, screen resolution, number of colors
    Time zone setting
    Startup volume choice
    Speaker volume
    Recent kernel panic information, if any
    DVD region setting
    SO hold down the Command "apple", Option, P, and R.
    at start up until you here the startup chime

  • Bios corruption please help me!!! Screenblack and failed upgrade

    I was upgrading my BIOS in my notebook, an envy 17, unfortunatedly the battery died in the process. My notebook cant restart again, it only has a beep with the blockmayus, and its all. Im sure that is a Bios corruption, i need help with the pendrive, i hope that the recovery USB can resolve this problem

    Ayrton wrote:
    I was upgrading my BIOS in my notebook, an envy 17, unfortunatedly the battery died in the process. My notebook cant restart again, it only has a beep with the blockmayus, and its all. Im sure that is a Bios corruption, i need help with the pendrive, i hope that the recovery USB can resolve this problem
    Hi,
    HP notebook computers have an emergency BIOS recovery feature that allows you to recover and install the last known good version of the BIOS from the hard drive, as long as the hard drive remains functional.
    Try restoring BIOS using instructons in this HP web document. You have to strictly follow it to elicit a positive response. The timings are of utmost importance and you've keep on trying many times.
    If that didn't work, try recovering the notebook BIOS using an external storage device (USB key) as mentioned in the doucment ...
    The latest HP UEFI BIOS Update SoftPAQ is sp69886.exe .  Run the installer and create a USB key as per instructions from another PC.
    (This package contains the WinFlash utility and a system BIOS image for the supported notebook model running a supported operating system. The WinFlash utility is used to locally flash the system BIOS (ROM) on notebooks operating in a Microsoft Windows environment.)
    Previous version of HP UEFI BIOS Update SoftPAQ sp66941.exe ,  is also available. You can try with this if latest one don't work out.
    Note: Keep the laptop plugged in with AC adapter to Power supply during the whole process.
    If the above methos doesn't work, please Contact HP in your region or local computer service center for further help in this regard.
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • HP 2000 BIOS Problem, Please help me

    When I turn on my system the message that comes up is that
    HP PC Hardware Diagnostic UEF, Version 1.6.0.0 BIOS
    Memory Test
    Hard Drive check
    Language
    Exit
    This is the message that I see when I on my HP 2000, then after existing I realised some keyboards are not working, please help

    Yes it can be

  • BIOS settings: please help

    Hello,
    You can see my specifications below.
    I have been busy for weeks with my graphic card to reduce it's crashing.
    Now I hope that someone, seeing my specifications below, might be so kind to help me
    with the system BIOS settings, who are still at "default values".
    I do video editing, burning etc. but no gaming.
    I don't intend extreme over clocking.
    I have removed the NB-fan as reducing noise is important to me.
    Could someone give me some system BIOS settings and values,
    for a good performance.
    tia
    Azerty

    Seems we do something similar. See my signature for details. For me, it
    worked out better to use 5:4 rate and to increase overclock the CPU only,
    because MPEG2 encoding seems still to be CPU bound and mem performance
    is not that big issue. The increase of speed is aproximately the increase of
    CPU performance.
    To enable 5:3, you have to set DRAM timing from AUTO to 333. Still a clock
    rate like 227 in my case is x15 fot the CPU but x4 /5 for the RAM, giving you
    some potential with DDR400 RAM. In my case, the Corsair allow me 2-3-2-5-8
    at the rate.
    For me, setting ram timings to SPD allows the MB to do a lot of nasty things.
    MSI is somewhat nasty anyhow. 200 MHz FSB is 203. To get something like 200,
    you have to set it to 201. I prefer manual settings. PAT is enabled and disabled
    just like the board wants. A lot of different behaviours for different settings
    and BIOS versions. I use 1.8. Here, PAT is alwasy disabled in 1:1 when you
    set RAM timings manually. When setting it SPD, it will be on in Fast and up.
    For me, PAT is switched on in 5:4 even in manual. Some say, in 5:4, PAT
    can never be enabled. But for encoding, I saw no difference. For cutting, also.
    Disable spectrum spread. Let PIC/AGP work at 33/66 fixed. To ackomplish this,
    you might have to enable SATA, even if you don't use it. It's a bug. If you
    anable Parallel only, you can set "keep yes fpr Serial" in IDE settings. Look for
    other hints in this forum. (Sorry, just saw in your sig that you have SATA).
    For the fan: I asked the question and a lot of people said it's no recomended to
    simply switch off the fan. So I decided to by a cheap manual fan control. I use
    it to reduce NB fan to minimum, so I nearly not hear it. I also have a case fan
    that is alread reduced and reduced further by this control. The Zalman Cu
    fan is also quite silent, I also reduce it. For cutting, no problems. CPU in idle
    is about 35-38c (case 33c), will not go beyond 40-42c when cutting. When I do
    encoding, it will raise. In this case I have to give aprox. half throttle (I normaly
    leave the room for some 12-15 hours of encoding 90 minutes CBR 6500 and
    switch them to full). Otherwise temps will raise to 60c (and crash). With a bit of
    fan, they will stay at around 50c, which is ok.
    If you have further questions, you can also email me.

  • Problem in Logicpart for a BADI  !! please help me

    hello all ,
    Im writing small code in implementationpart of method for one BADI /SAPSLL/IFEX_SD0C_R3 .
    In the following code Im getting the values into tl_ref2 from the structure present in the method which is having delivery number .
    loop at tl_ref2 into wl_ref.
        move wl_ref-refno to wl_likp-vbeln.
        append wl_likp to tl_likp.
      endloop.
    *C Finding the shipment number from the delivery number
      clear wl_likp.
      if not tl_likp is initial .
    loop at tl_likp into wl_likp.
        select vbeln
                from
                 vbfa
          into corresponding fields of table tl_vttk
         where vbelv = wl_likp-vbeln and vbtyp_n = '8'.
          endloop.
      endif .
    Here for the delivery 80009852 the values exist in VBFA table . But I'm getting sy-subrc = 4 and the table tl_vttk is not filled .
    I have tried all possible ways .i have changed the code into for all entries , declared same data types, but still sy-subrc = 4 even though the values exist in VBFA table .
    Please tell me why tl_vttk table is not filled even though the value exist in VBFA table
    regards
    pavan

    Hi Uma
    Thanks for the reply . the conversion routine is already used in the logic . For VBTYP_N = '8', the values exist .
    Please see the detailed code .
    the value for VBELN exist in VBFA . but im gettng sy-subrc = 4 in the select statement
    please see the code below
    tl_ref1         =  cs_hdr_cdoc-ref.
      LOOP AT tl_ref1 INTO wl_ref WHERE objtp = c_objtp .
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'   " For deleting Leading zero's
          EXPORTING
            input  = wl_ref-refno
          IMPORTING
            output = wl_ref-refno.
        APPEND wl_ref TO tl_ref2.
    *C-There can be case when tl_ref1 has multiple entries so wl_ref is not cleared because in case of single entry it is used further
      ENDLOOP.
      DESCRIBE TABLE tl_ref2 LINES l_n.
      clear wl_ref.
      loop at tl_ref2 into wl_ref.
        move wl_ref-refno to wl_likp-vbeln.
        append wl_likp to tl_likp.
      endloop.
    *C Finding the shipment number from the delivery number
      clear wl_likp.
      if not tl_likp is initial .
    loop at tl_likp into wl_likp.
        select vbeln
                from
                 vbfa
          into corresponding fields of table tl_vttk
         where vbelv = wl_likp-vbeln and vbtyp_n = '8'.
          endloop.
      endif .

Maybe you are looking for

  • Windows 7 Crashes/Freezes when playing ANY Video files

    lets see can anyone get their head around this one as it is driving me round the bend.  So... I have a media centre PC connected to my HDTV by VGA cable. I ran the PC on XP for a long time but last December, I upgraded it to Windows 7 along with my l

  • "Stuck" Image in Transparent Background

    After Effects 11.0.2.11 Mac OS 10.7.4 A "ghost" frame from an old movie is stuck in the transparent / checkerboard background.  Always the same movie / frame.   Even in a new comp without any layers this old quicktime movie shows up.  Was a moving mo

  • Socket and OutputProgressEvent.OUTPUT_PROGRESS, bytesPending

    Hi, I work on a projet to send large amount of data with sockets. Files are splited into bytearrays of 1 to 8 mb (to be able to resume an upload) and send with HTTP protocol. I think my project is correctly configured. A Flex 4.5.1 SDK updated with A

  • SAP Cloud For Customer and Gmail Integration

    Hi Experts, Is it possible to integration SAP cloud for customer with Gmail ? Please share your valuable thoughts on this post. Many Thanks Mithun

  • Copying start and end dates from service request contract to tasks

    I am working on a logical apps program that is supposed to go to the service request screens and update the PLANNED_START_DATE and the PLANNED_END_DATE of a task for that service request on file JTF_TASKS_B with the start date and end date of the act