7912G user-local problems with CME 4.0

Hi,
I have set the user-local to IT (italian), and have 2 7960's and 1 7912G.
The 7960's pick up the italian display on the phones, but the 7912 does not.
Any tips would be highly appriciated.

Another thing that I needed to do, when I reverted back to manual configuration, was setting the phone type to 7912 in the ephone section.
ephone 3
no multicast-moh
mac-address 0011.xxxx.xxxx
type 7912
button 1:3

Similar Messages

HT201210 nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and somet

nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.

It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.

Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?

Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?

Mine's a late '09, but there have been display issues with iMacs.
Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

Problems with CME user locale

Hello!
I have Cisco 2811(IOS 12.4(22)T1, CME 7.0.1).
I try to set up user locale but get error message:
voip(config-telephony)#user-locale U2 US
Updating CNF files
Cannot open flash:/its/user_define_2_tags_file, some TAGs will be displayed in English
Cannot open flash:/its/user_define_2_utf8_tags_file, some TAGs will be displayed in English
CNF files updating complete
Where I can find this files (tags files)?
Telephony-service config:
telephony-service
em keep-history
max-ephones 25
max-dn 20
ip source-address 192.168.2.100 port 2000
timeouts ringing 40
system message
cnf-file location flash:
cnf-file perphone
user-locale U2 US
user-locale 1 U1 load CME-locale-ru_RU-Russian-7.0.1.1.tar
network-locale RU
load 7960-7940 P00308000400
time-zone 32
time-format 24
date-format dd-mm-yy
voicemail 5000
max-conferences 10 gain -6
call-forward pattern .T
moh music-on-hold.au
multicast moh 239.0.0.1 port 16834 route 192.168.2.100
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern .T
directory entry 1 1000 name mnb
create cnf-files version-stamp 7960 Jan 26 2009 13:34:34

Thank for your reply.
My problem consisted in that IP Communicator not change locale even set "user locale RU", using ephone-profile...
But I find my mistake. I not set type for ephone. After change type to CIPC, all work correctly.

OID users ( EUS) problem with grant create table with admin

Hi,
We activated enterprise users in the OID.
There is a role APP_ADMIN that has the following grants:
create user
drop user
create table with admin option
this is for an application that creates BI schemas, so it needs to be able to create other users.
I have granted these to a local role, and the user has access to the local role, thanks to the OID setup.
The create and drop user work.
however, the grant create table to another user does not work.
Is there an issue with 'with admin option' grants in Enterprise user security?
Regards,
Peter

If I grant
grant create table to test_role with admin option;
it does not work
if I grant
GRANT GRANT ANY PRIVILEGE to test_role WITH ADMIN OPTION;
it does work.
The test command as user with test_role is:
grant create table to test_usr;
very strange!
If the user is a standard user and I create role test_role
and grant create table to test_role with admin option it works.
but if I convert the user to an EUS user and the same privilege is given to the role ( role is granted to a global role to an enterprise role)
it doesnt work
Edited by: Peter on Dec 7, 2012 2:36 PM

Chrome (Windows NT 6.1 6.2) users reporting problems with loading and mouseevents - any insights?

For several years now, I have created simple studies (I do psychological stuff) to run online, recruiting participants through Amazon Mechanical Turk (AMT). I have had no problems until recently (last 6 to 9 months). Now, some AMT users are reporting problems with stimuli loading or buttons not responding immediately when clicked (e.g., advancing to a new screen). What is common amongst all the users experiencing problems is that they use Chrome, and they also tend to be Windows NT 6.1 or 6.2 users running Flash Player 12.0. But not a single Firefox, Safari, or MSE user has ever reported an issue. I'm just looking for help in troubleshooting this problem. Again, the studies I run are incredibly simple (e.g., no videos being loaded from server, etc.), mostly word presentation where I record time and x,y coordinates of mouse movements as they respond to questions. Would attempting to publish for another target version of Flash Player help? The default setting is to publish the .swf and .html wrapper for Flash Player version 11.7. Any ideas? I also use version 13.0.1 of Flash Professional CC to create my studies if it helps.

This is helpful. Thanks. So it would be to my advantage to play around with something like SWFObject 2?
http://www.adobe.com/mena_fr/devnet/flashplayer/articles/swfobject.html
Or is there something else you would recommend?
What I've been doing is a far cry from actual web development, but quite interested in learning more. This swfobject seems to get at what you are suggesting (I think).

Intel iMac 20' users - any problems with noise on your firewire interfaces?

Someone please tell me that they have a quiet intel iMac 20'/Firewire interface set up, I'm having problems with a lot of digital noise from my Saffire LE & badly am hoping it's 'fixable' or just a faulty unit but more so, praying it's not noise from the iMacs Power supply that will interfere with any firewire interface I get???
I've read many posts about G5's suffering from noisy psu's which was one factor in my choosing an intel iMac & I chose the Saffire on it's great reviews for sound quality, there's no way I can work with the noise I'm getting & I'm pretty much panicking that if it IS the iMac & firewire thats the problem I'll be screwed as i only have 6 pin firewire as a useable option (really don't want to use usb2)
Incidentally, the 'budget' set up I had previously (PC & soundblaster audigy) didnt suffer from any noise like this (at least not that was even audible with the mixer levels at conversational level!) which i guess rules out any blame of this on 'mains hum/interference'?
The noise is there with the saffire's monitor output knob at any setting & with no inputs connected, it;s even worse if i power the saffire with it's external psu instead of off buss power. I'm not using a firewire hub & I've tried switching firewire leads & removing the firewire hard drive i have in the other port in case this was affecting it.
Would really appreciate hearing from anyone with similar troubles or even better anyone thats NOT having this problem with a 20' intel iMac & firewire interface so at least i know there's light (& quiet!) at the end of the tunnel
Adam
Intel iMac 20' Mac OS X (10.4.7)

funnily enough I'm going the other way, I have a rack of external modules/>sampler/fx etc & a crate of looms I've just unplugged as they've not been >turned on in so long!!!
I hear you there!
The noise is there without any inputs at all to the interface, its defiantely >digital though, its like a toned version of the sound of an old telephone >modem.
What I mean, is try disconnecting everything, drives and all. You might even disconnect the interface and crank up the iMacs volume to see if it is there. If it is, you can try the UPS and see if that takes care of it. Then add them in one at a time. All it takes is one cheap power brick in the mix to cause all kinds of trouble (if your using powered monitors, that brick too). Noisy components can actually send noise back into the source power.
I know it can be really frustrating, especially if you have noise coming from more that one source. The key is to strip everything until it is quiet and then add them back in to see where the worst is. Then come up with a plan to try to get rid of the noise.

For users having problems with Mail functionality...

Hello! I have been having problems with Mail functionality as well, so, I took a few steps to see if I could solve the problem on my own.
My problems were:
Mail would freeze when sending mail, or, when I pressed quit, it would freeze.
If I toggled between inboxes too much it would freeze up.
Even after trying the many techniques others offered on this board, Mail still froze up. So.. here's what I did:
1.) Turn off the auto-retrieve mail function in the preferences/general menu. Set it to a manual check. Just check it yourself every once in awhile. It may not be as convenient, but it works, trust me.
2.) Under the fonts and colors menu, set all three fonts to the SAME font (mines Century Schoolbook, but anything works) and turn off fixed-width font. Sometimes mail has a tough time decoding and working with texts, and causes it to freeze.
3.) Clean our your main inbox! Place the emails that you want to keep, but don't need to be in your inbox in a new folder on your inbox bar (mines aptly named 'Saved Messages.' That way, when you open up Mail to your default account, it doesn't have 1,000+ messages to index. Also, try to keep the inboxes from having more than 100-200 messages per. It seems to frown on any more than that.
After trying these three easy, steps, restart mail and see if things run smoother. I have had no problems since these changes, and mail runs a ton better. Plus you don't have to worry about deleting your library/mail folder anymore. Let me know if things work out so I can see if my theory is a universally proven thing. Thanks and good luck!
iMac G5 20" Mac OS X (10.4.5)

Good question. I have worked very little with IMAP other than as a testing device, so, on a daily routine I cannot say how it would function. However, I can only expect that by having the option to download all emails for offline viewing selected, you are right in it being a lag creator. Another suggestion would be, if you are running a single-computer setup, to have the account delete emails from the server after recieving them on your computer. Thus, you reduce the risk of repeat downloads or unnecessary build-up on the server end. DO NOT select this option if you run multiple computer set ups on one AppleMail account system or you will cause some discrepancies and/or data loss from system to system. Or, if you have emails redirected from a seperate server to Mail (i.e. I redirect mail from my university email account into Mail so that I don't have to go to the web-mail site to check it--> just like Gmail or Yahoo etc etc) you won't be able to check them from the web-based email system if you have the system delete them. Ok that sounded confusing. Solution: have the system remove emails from the server after a week (or any period of time, just not immediately) so that, in the off-chance you need to use the online system, you will have access, and will give you a chance to check the emails on other systems without a threat of data corruption (by corruption i mean that frustrating feeling you get when you can't find that super important email that was in your inbox just 10 seconds ago on your desktop etc.)
I will see if I can learn anything more about IMAP Ernie. Its definitley the biggest problem source for Mail, POP and .Mac being simple and functional as long as you don't play with the settings too much. As far as the issue of Offline viewing goes, try turning it off and seeing how Mail functions.
BEFORE you turn it off, however, I recommend saving all of your emails in your inbox as a text file or something so, in case the server burps and has a brain flatuence, you don't lose anything. Been there, done that, thrown the books against the wall in a frustrated rage.
My only reserve about the Offline Viewing is whether or not Mail will, when you click "recieve mail," have to re-download the emails from the server each time. If so, then it may end up taking longer and lagging more. The issue here is obviously minimizing the amount of activity between Mail and the email server without jeapordizing information on the server or multiple Mail programs on the same account. When we can find that balance, I think Mail's potential will be realized. Keep the questions coming.

First time user..problem with compatibility mode

Old problem with a twist. Like others have experienced, when I open itunes I get a message that reads itunes.exe is set to run in compatibility mode and I need to turn it off. The problem I have is that I DON'T FIND a compatibility option when I right-click on Properties. Any ideas???

Refer to this article:
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/TS1489

User Concern Problems with BEx

Hi to all,
Can you please share some of <b>User Concern issues with BEx</b> and the <u>Solution</u> for those.
Thanks in advance.

check sap note 1007360 and the related notes. also check sap note 1089582
we are getting odd results in very simple formula and also some rows in a query have no data when it should.

Multiple user login problem with ADF

Hi All,
I am using Jdev 11g. I have an ADF application which is running inside JDev enbedded WLS. I implemented "Authentication Only" security into the application and created a few users. If I try to login/logout/re-login with individual user, all of users work perfectly. However, when I have one user already logged in, I open another browser and try to login with another user (or the same user), I always get an "Error 403--Forbidden" error. Basically I have an application which can only work for one user at one time. Does anyone know how to fix this problem so that I can have multiple users logged in at the same time?
Thank you very much in advance,
John

Chris,
Thank you for your response.
I am using Firefox version 2.0.0.20. When I add the security component into my ADF application, I just take whatever it has by default without any customization. That includes default login.html and error.html. Here is my experience,
1) Execute my starting task flow activity inside the JDeveloper. This will invoke a new login page in my default browser Firefox.
2) Login the application with user "abc" and do something. Keep this session open.
3) Open another Firefox browser and enter login URL. and then Login the application with user "xyz" (or even "abc"). I got the error page.
To me, it should be basic web application behavior. I can do things like this in other J2EE application. This one doesn't make sense at all. I am not sure if this is the behavior I would see when I deploy it to a standalone WLS.
Any ideas?
Thanks,
John

Lost Locale problem with Struts/Validator Plugin client side validation

Has anyone else had problems losing the locale in the generated javascript ?
With the following tiles def and layout (nmLayout.jsp) I can get the locale from the browser OK with
<html:html locale="true"> and it works ok for imported text (picking up the enCA properties file. But when the javascript executes in the provisionCustomer.jsp the locale reverts to the default property file.
The Strruts Validator loses the locale of the containing html page. (I do a show source.) I've tried an explicit <fmt:setLocale value="en_CA" scope="session"/> but this has no effect either.
Thanks
Bruce
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE tiles-definitions PUBLIC
"-//Apache Software Foundation//DTD Tiles Configuration 1.1//EN"
"http://jakarta.apache.org/struts/dtds/tiles-config_1_1.dtd">

<tiles-definitions>
<definition name="nm.MainMenu" path="/nmLayout.jsp">
<put name="pageTitle" value="Distibutel Network Management" />
<put name="header" value="header.jsp" />
<put name="body" value="mainMenuBody.jsp" />
<put name="footer" value="footer.jsp" />
</definition>
<definition name="nm.customer" path="/nmLayout.jsp">
<put name="pageTitle" value="Distibutel Network Management -- Provision Customer" />
<put name="header" value="header.jsp" />
<put name="body" value="provisionCustomer.jsp" />
<put name="footer" value="footer.jsp" />
</definition>

<definition name="${YOUR_DEFINITION_HERE}">
</definition>
</tiles-definitions>
nmLayout.jsp :
<%@ page contentType="text/html; charset=UTF-8" %>
<%@ taglib uri="/WEB-INF/struts-tiles.tld" prefix="tiles"%>
<%@ taglib uri="http://struts.apache.org/tags-html" prefix="html" %>
<%@ taglib uri="http://struts-menu.sf.net/tag" prefix="menu" %>
<%@ taglib uri="http://struts-menu.sf.net/tag-el" prefix="menu-el" %>
<%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %>
<%@ taglib uri="http://java.sun.com/jstl/fmt" prefix="fmt" %>
<%@ taglib uri="http://java.sun.com/jstl/sql" prefix="sql" %>
<html:html locale="true">
<head>
<title><tiles:getAsString name="pageTitle"/></title>
<link rel="stylesheet" type="text/css" media="screen"
href="styles/global.css" />
<meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
<style type="text/css">
body { background: AliceBlue; }
#appcontent {
                         position:absolute;
                         top: 300px;
                         left: 200px;
               h1 {color: red;}
               h2 {color: green;}
</style>
</head>
<body topmargin="0" leftmargin="0">

     <script type="text/javascript" src="./scripts/coolmenus3.js"></script>
     
     <script type="text/javascript" src="./scripts/coolmenu2-config.js"></script>
     <menu:useMenuDisplayer name="CoolMenu"
     bundle="org.apache.struts.action.MESSAGE">
     <menu:displayMenu name="ToDoListMenuProvision"/>
     </menu:useMenuDisplayer>
<table>
<tr>
<td><tiles:insert attribute="header"/></td>
</tr>
<tr>
<td><div id="appcontent"><tiles:insert attribute="body"/></div></td>
</tr>
<tr>
<td><tiles:insert attribute="footer"/></td>
</tr>
</table>
</body>
</html:html>
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
<%@ taglib uri="http://java.sun.com/jstl/fmt" prefix="fmt" %>
<html:javascript formName="customerForm" />
<html:errors/>
<h1><fmt:message key="ProvisionCustomer.title"/></h1>
<html:form action="/saveCustomer"
onsubmit="return validateCustomerForm(this)" >
<table>
<tr>
<td><h2><fmt:message key="ProvisionCustomer.TenantName"/>:</h2></td><td> <html:text property="tenantName"/></td>
</tr>
<tr>
<td><h2><fmt:message key="ProvisionCustomer.TenantID"/>:</h2></td><td> <html:text property="tenantID"/></td>
</tr>
<tr>
<td><h2><fmt:message key="ProvisionCustomer.CustomerID"/>:</h2></td><td> <html:text property="customerID"/></td>
<td></td><td><input type="submit" value=<fmt:message key="ProvisionCustomer.insert"/>></td>
</tr>
</table>
</html:form>

you can always get the locale from the request like so....
<html>
<%
request.getLocale().toString();
%>
</html>
you can even stuff it into javascript like so....
<html>
<head>
<script>
function foo() {
var locale = '<%=request.getLocale().toString()%>';
</script>
</head>
</html>
then you can have access to it in javascript code.

Help Importing objects from 1 user to another user and problem with trigger

Hello community, i am having a little difficulty with the exporting objects from one user to another specifically the exporting of the trigger.
Here is the situation, because of SOX purpose whenever a update is sent to the client the dba have to execute the script as himself (priviliged user) and is not allowed to log into the schema to make changes. Therefore we perpend the object definitions with &user_schema.. and they define user_schema in sqlplus and execute the update script.
Here is a small example which requires two users (user1 and user2) with the following grants (connect, create table, create trigger, create view, create sequence). Please forgive the naming of the objects, just trying to be as simple as possible.
I start out by logging in as system user via sqlplus and execute the following.
------------------Begin sqlplus----------------------
define user_schema=user1;
create table &user_schema..abc01 (
col1 number,
col2 varchar2(20),
col3 number,
constraint pk_abc01_col1 primary key (col1)
create table &user_schema..xyz01 (
col1 number,
col2 varchar2(20),
col3 number,
constraint pk_xyz01_col1 primary key (col1)
create or replace view &user_schema..view1 as
select x.col1, x.col2, x.col3, a.col1 as acol1, a.col2 as acol2, a.col3 as acol3
from xyz01 x
inner join abc01 a on a.col1 = x.col1;
create sequence &user_schema..seq_xyz01 start with 1 increment by 1;
create or replace trigger &user_schema..trig01
before insert on &user_schema..xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
    select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;
/--------------------End sqlplus----------------------
I would then proceed to export using the exp utility via the command line
exp system/systempassword file=user1.dmp owner=user1
Then import user1 objects into user2
imp system/systempassword file=user1.dmp fromuser=user1 touser=user2
Now the problem:
When i take a look at the sql for user2 trigger (trig01) i see the following (viewed via sqldeveloper)
create or replace TRIGGER "USER2".trig01
before insert on user1.xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
    select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;its referring to user1.xyz01 table, however i want it to point to is user2.xyz01 table. Can someone please help me out or offer another solution to go about this because i need the ability to import the objects into a different user without the import failing and having to recompile the object.
I've also tried executing this while connected as system user via sqlplus:
define user_schema=user1
create or replace trigger &user_schema..trig01
before insert on xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
    select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;
/but that fails stating that table or view does not exist, please help
however that fails because i
Edited by: user3868150 on Nov 6, 2009 6:05 PM

When performing an update in their system, the same script will be run with different values, thats not the problem.
The client currently have just that one schema in their environment, however they want to have another instance of the application set up in their environment (same database) and have that go off on its own track separate from the original application.
Now when we do an exp of the schema and the imp it into another user it get imported, however its incorrect. As stated before the trigger will be acting on the table in the original schema when it should be acting on the table in the newly imported schema.
I suppose there is no other way around this when a trigger is created the way in which i outlined above. I guess after the data gets imported into a different user the trigger would have to be recompiled to point to the correct table.
If you have an alternate solution to go about this i am open to suggestions. However like i mentioned in the original post because of SOX purpose the dba is not allowed to log in and execute update scripts as the schema user. The scripts should only be executed as that privileged user (dba).
Also if i hard code the user when the trigger is created
create or replace trigger user1.trig01
before insert on user1.xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;
/it still doesn't get imported the way that i want it to be imported in user2
create or replace TRIGGER "USER2".trig01
before insert on user1.xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
    select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;now when i do an insert to test
insert into user1.xyz01 (col2, col3) values ('abc', 123); -- Works fine, no problems here
insert into user2.xyz01 (col2, col3) values ('abc', 123);Results in an error ORA-01400: cannot insert NULL into ("USER2".XYZ01"."COL1") because the trigger doesn't exist on user2.xyz01 table.
Just try and create the schema like how i outlined above in your environment to see what i'm talking about. It seems that the only way to get the trigger to be imported the way i want it to is to actually log in as that user and create the trigger.
sqlplus user1/user1
{code}
create or replace trigger trig01
before insert on xyz01 for each row
begin
if (nvl(:new.col1, -1) = -1) then
select seq_xyz01.nextval into :new.col1 from dual;
end if;
end;
{code}
Edited by: user3868150 on Nov 6, 2009 6:10 PM

With VPD I see other users results - problems with AM caching??

I am using JDeveloper 11.1.1.0.2.
In my application I have 3 Appllication Modules (Admin, Store and Sale) and I use VPD and setcontext in every AM.
@Override
protected void prepareSession(Session session) {
super.prepareSession(session);
setVPDcontext();
private void setVPDcontext() {
String userName = getUserContext().getUserId();
String ind = "J";
String sql =
"begin xxx_context.set_context('" + userName +
"', '" + ind + "'); end;";
java.sql.CallableStatement stmt = null;
try {
stmt = getDBTransaction().createCallableStatement(sql, 0);
stmt.execute();
catch (SQLException se) {
throw new JboException(se.getMessage());
finally {
if (stmt != null) {
try {
stmt.close();
catch (SQLException e) {
throw new JboException(e);
The problem is that I see the results of previous VPD-queries.
3 testcases:
1. User1 has access to 3 AM (Admin, Store, Sale), if I log in I can see the correct results in the application (in Admin, Store and Sale).
User2 has only access to 1 AM (Store), If I log in as User2 I see the results of User1 in Store (wrong).
2. After restarting the weblogic server and logging in as User2 I see the correct results for User2!
If I log in as User1 I see the results of User2 in Store (wrong!!) and the correct results in Admin and Sale!
3. User1 has access to 3 AM (Admin, Store, Sale), if I login as user User1 I only use Admin and Sale (so there are no cached results for Store).
User3 has access to Sale and Store. If I login as User3 I see the results of User1 in Sale and the correct result in Store.
Conclusion: I see cached query results of the first user who logges in a Application Module. Only restarting the Weblogic Server makes the cache empty. The problem only occurs with queries with VPD.
How can I resolve this problem?

User,
I'm on a bind variable crusade today (not the answer to your question, unfortunately). Please please please please use bind variables instead of gluing literals together like that (use PreparedStatement instead of callable statement). You can also parse the PreparedStatement once and avoid the overhead of parsing on each call to prepareSession.
John

Design mode locale problems with 4.5.1

I tried this in the Flex forum but no answers. I'll try here. I've been working on a project for a year that has worked fine. I upgraded to 4.5.1 and now can no longer edit several of my components that were localized. I solely get a red X and a design error that says "Assets failed to compile. Design Mode is unable to display the document styles, skins, and images because the following assets have failed to compile:Details :unable to open 'locale/en_US'(command line - Line:-1)"
I've a folder with locale/en_US and it actually localizes fine if I run the app, but I can not longer edit in design mode which, as you might guess, really puts a damper on moving objects by pixels.
Any suggestions?

I don't have a solution, but i think i pinned the circumstance down to being generated when:
You have a localised project
You also embed a generic (non-localised) asset
In the case I used to file a bug report, including/removing an <s:Image> tag causes/removes the problem:
https://bugs.adobe.com/jira/browse/FB-32609
Note: In my builder I had an additional issue making it difficult to pin down - in that once the Design Mode Problem had been raised, even reverting the line of code that caused it didn't clear the problem report - took a couple of odd steps:
https://bugs.adobe.com/jira/browse/FB-32610
Message was edited by: creacog - fix typo

7912G user-local problems with CME 4.0

Similar Messages

Maybe you are looking for