7916 Expansion Module - management of listed extensions/names

I have 70+ offices with various setups.  In some cases I have 7975 and 7965 phones with 1 or 2 sidecars, up to the main office with 3 recepionists with 2x 7916 sidecars with 48 potential buttons.
Right now if I want to add an employee, I have to either go through each sidecar, and basically re-enter the information past the point of the new hire, because we keep them in alphabetical order.
Or, I have to export all details, convert to spreadsheet, find the section with the BLFs, transpose that, update it, transpose it back, convert the file back to CSV, upload to CUCM, and then import the file.  We hire/move/fire 8-10 people a month lately (as we prepare for 30 percent of our work force to hit retirement age in the next 5 years), and this is a LOT of effort.
Surely there is a better way?

You have to create a datasource on WebLogicb with the JNDI name: jdbc/ADFDBDS
The steps involved to create a datasource can be found here: http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/jdbc/jdbc_datasources/CreateDataSources.html

Similar Messages

  • How to configure 7916 expansion module

    Hi
    Can somebody show me, how to configure 7916 expansion module, it's the first time I worked with and i have just a blue screen when I connect it to 7965.
    thanks for all

    Hi Malek,
    The steps are detailed here;
    Attaching a Cisco Unified IP Phone Expansion Module
    http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7962g_7961g_7961g-ge_7942g_7941g_7941g-ge/7_1/english/administration/guide/62614241set.html#wp1039513
    Hope this helps!
    Rob

  • 7916 Expansion Module Power Adapter Alternative

    hi all,
    i received a 7916 expansion module but it didn't come with the power adapter.
    i heard (or maybe read) somewhere that you can use the power adapter of Cisco APs.
    i tried to google but giving me cisco vendor site.
    anyone can confirm the alternate model and its voltage?

    You can compare the specs, but why not order the correct one:
    CP-PWR-CUBE-3=
    CP-PWR-CORD-xx=

  • Cisco Expansion Module 7916

    I have an issue with the 7916 expansion module on a Cisco 7965 phone.  The sidecar loads properly (wilt all the configured extensions) and the page 1 & 2 buttons on the bottom luminate correctly.  However, the side LED buttons do not light when a line is in use.  I can press an extension and it calls correctly but only briefly flickers green then does not light.  I have switched sidecar, power supply and phone as well as looked at the configuration setting in CM.  Any config/solution someone has come across that they may be able to help with?  Thanks in advance for any information.

    Hi Ronald.
    Did you try to configure one of 7965 button as BLF speed dial?
    Did it work?
    Which version of CUCM are you running?
    Which firmware 7965 is running?
    Let me know
    Regards
    Carlo

  • Expansion Module

    Hi. I'm running CallManager 4.3(1) and am using 7975 phones. We are tying to get a 7916 expansion module working on some of them. Can this be done? I'm using service release 1 of CallManager

    Table 4. Cisco Unified IP Phone Expansion Module 7916 Software Requirements
    Call-control compatibility
    Cisco Unified Communications Manager 4.2(3) SR3a, 4.3(2), 5.1(3)b, 6.1(1), 7.0, 7.1 and later; Cisco Unified Communications Manager Express 4.3/7.0 and later. Cisco Unified Survivable Remote Site Telephony (Unified SRST) 4.1 (IOS 12.4.15T) and later.
    HTH
    java
    if this helps, please rate

  • NAM 2304 expansion modules

    Hi Everybody,
         Does NAM 2304 appliance has any expansion modules? I am out of interfaces and need new interfaces to be able to analyze different traffic.

    Hi,
    did you check if the Expansion Module 7916 is defined in Cisco Unified Communications Manager.
    Also check if the Expansion Module 7916 is configured as a 24-line module instead of a 12-line module.
    Refer the below link for more detail.
    http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cuipph/7916/english/16enug.pdf
    Regards,
    Venkatesh.

  • What is the Workflow Business Event Name for Order Management Price List

    Hello Everyone,
    Can anyone please help me to find out the Workflow Business Event name for the Order Management Price List?
    Thanks in advanced,
    Chandan

    Chandan
    Are you looking for business event name that is raised when the price list is created?
    Thanks
    Nagamohan

  • Business Catalyst Folders and Module Manager Feature

    Hi,
    I have created a Business Catalyst Site using the extension in Dreamweaver. I am a new Creative Cloud member. I have also viewed many tutorials.
    I don't seem to have the full range of folders in the test temporary BC site I have created I dont recall seeing these folders when I created the site. I am missing;
    Web apps
    Modules
    CRM
    E- Commerce
    E-Mail Marketing
    I was particularly interested in module templates for photo galleries but I don't seen to have this feature. When I am in the BC Admin Console viewing a web page and select the module manager (blue circle with a + sign)  I was expecting a list to appear on the right hand side.
    The grey module manager button also does not seem to be available.
    I would rather not create a new site as I have done a fair bit of editing. Is there anything I can do ?
    Kind Regards, Matt.
    http://craftime-bs6.businesscatalyst.com/

    Hi,
    The current site is still in trial I just moved it to a higher plan for you to test.  In order to use an actual live payment gateway you must upgrade the site from trial to a purchased "webCommerce" plan. 
    I believe there may be some confusion on the type of site plan you get along with your CC subscription.  Please note the 5 entitled site will come under the "webBasic" plan and for higher plans you'll need to purchase additionally.
    Reference: http://forums.adobe.com/docs/DOC-2153
    If still needing further guidance or if wanting to purchase a higher plan please reach out to our direct support to assist with your account/billing query. 
    - http://helpx.adobe.com/business-catalyst.html
    Thanks,
    -Sidney

  • Search capability in Module Manager

    I pulled up the Module Manager and wanted to verify that I
    had already installed the DTrace module from the Update Center.
    But it took me longer than I expected to find DTrace in the module manager -- there are
    so many different modules installed! Finally found it under "Debugging" whereas I'd
    been looking under "Sun Studio" and "Tools".
    Is there a search capability for the Module Manager that I missed? I'd like to be able
    to type in something close to "DTrace" and get a list or view of installed modules that seem like
    close matches. Or are there other ways to find a particular installed module than to flip all the
    "turners" one by one? I'm afraid that feels to me a little bit like looking under rocks!

    In SunStudio12 there's no search facility in
    the ModuleManager but you can use the context menu and
    sort by name. That collapses the hierarchy and sorts.
    In the upcoming NB6.0 based SunStudio there won't be a ModuleManager, but only a Plugin manager and it has
    search capability.

  • Finding Line Expansion Module in use

    Does anyone know how to find working Line Expansion Module's (7914, 7916)? I can find how many are configured but haven't been able to find modules that are actually in use (configured but not connected to a phone). Running UCM v9.1.2.

    Hi
    You'd have to look directly at the phone, well... at least at the phone status page.
    Browse directly to the phone in this format:
    http://x.x.x.x/DeviceInformationX
    It will show you the firmware e.g <addonModule1>B016-1-0-4-2</addonModule1>
    Or module type <addonModule1udi>KEM</addonModule1udi>
    If you need to do that on all phones you need an app or script, I have an inventory tool that could easily be extended to grab those elements from all your phones in bulk, though that's not something it does at the moment. It's here : http://www.ipcommute.co.uk/5-/11-phone-operations-manager.html
    Aaron

  • Cisco 7975 Expansion modules

    Dear,
    I have some questions regarding the expansion modules on phones, specifically the 7916 ones. 
    If i have one with 12 physical buttons and 2 page buttons i can assume it's a 24 line button i have to set on the configuration page of the phone correct? Or am i seeing this wrong. Is there a handy way of knowing this directly?
    I have a specific phone Cisco 7975 that has issues getting the 7916 addon module working, i have set a 7916 24 button on the config page of the phone. The addon module still shows the logo of Cisco and doesn't change.
    The load is present on the call manager, i have seen it via "Device Defaults", shall i proceed in upgrading the 7916 firmware then on the Call Manager, maybe this can solve the problem?
    CM version: 8.6.2

    Most of the times firmware phone/expansion
    Just upgrade phone and expansion.
    And you select 7975 with 7916 24 buttons or 12 buttons
    JH

  • Difficulty in using a variable to pass a list of names between 2 tables

    Hi All,
    I am trying to pass a list of names from one table as a variable to another table and trying to find the Highest level they exist at in the hierarchy. I am having some troubles with the variable and need some guidence and also if this should be a procedure or not.
    this is what i have now :
    Variable man_name Varchar;
    exec :man_name = (Select full_name from direct_manager_report)
    UPDATE direct_manager_report
    Set Manager_level_number =
    (Select 'Manager_Level_0' from manager_hierarchy where level_0_manager_name = man_name
    UNION
    Select 'Manager_Level_1' from manager_hierarchy where level_0_manager_name < > man_name AND level_1_manager_name = man_name
    UNION
    Select 'Manager_Level_2' from manager_hierarchy where level_1_manager_name < > man_name AND level_2_manager_name = man_name
    UNION
    Select 'Manager_Level_3' from manager_hierarchy where level_2_manager_name < > man_name AND level_3_manager_name = man_name
    Where full_name = man_name;
    Let me know what modifications have to be done for this the variable to get the name from table 1 and find the manager level from table 2 and populate it back in table 1.
    Any help is appreciated.
    Thanks

    Frank Kulash wrote:
    Hi,Thanks for your reply. I am sorry for not providing enough information.
    What's wrong with what you have now? I want to pass the manager name (about 2000) from direct_manager_report to the variable which i pass to manager_hierarchy table to find the highest level for each manager
    If it doesn't give the right results, then how is anyone except you to know what the right results are?
    Variable man_name Varchar;
    exec :man_name = (Select full_name from direct_manager_report)Does that really work for you?No thats why i said this is what i have and i am trying to see the best to past the list of manager names to get the level number.
    UPDATE direct_manager_report
    Set Manager_level_number =
    (Select 'Manager_Level_0' from manager_hierarchy where level_0_manager_name = man_name
    UNION
    Select 'Manager_Level_1' from manager_hierarchy where level_0_manager_name < > man_name AND level_1_manager_name = man_nameIt looks like something is missing on the line above. Did you mean "level_0_manager_name != man_name"?
    This site doesn't like to display the &lt;&gt; inequality operator. Always use the other (equivalent) inequality operator, !-, when posting here.
    UNION
    Select 'Manager_Level_2' from manager_hierarchy where level_1_manager_name < > man_name AND level_2_manager_name = man_name
    UNION
    Select 'Manager_Level_3' from manager_hierarchy where level_2_manager_name < > man_name AND level_3_manager_name = man_name
    Where full_name = man_name;Are you sure the UNION will never return more than 1 row?
    Let me know what modifications have to be done for this the variable to get the name from table 1 and find the manager level from table 2 and populate it back in table 1.Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements) and the results you want from that data (in this case, the contents of table1 after everything is finished).
    See the forum FAQ {message:id=9360002}Sorry did not realize the missing !. Yes the union will always return one record for each manager name passed. I have tested the select part which hard coding the manager name and it does update the level number correctly. but i am struggling with passing a large list of values as a variable.
    This is the output i am looking for in the direct manager report table is :
    Manager Name | Manager Level Number
    ABC Manager Level 0
    XYZ Manager Level 1
    This is the structure of the manager hierarchy:
    Manager Level 0 Manager Level 1 Manager Level 2...Manager Level 14
    ABC ABC ABC ABC
    ABC XYZ XYZ XYZ
    Let me try the below but hopefully i am more clear on the requirement now.
    >
    You may want something like this
    MERGE INTO  direct_manager_report     dst
    USING   (
             SELECT    dmr.full_name
             ,           'Manager_Level_'
                    || MIN ( CASE  dmr.full_name
                                 WHEN  level_0_manager_name  THEN '0'
                                 WHEN  level_1_manager_name  THEN '1'
                                 WHEN  level_2_manager_name  THEN '2'
                                 WHEN  level_3_manager_name  THEN '3'
                               END
                     ) AS manager_level_number
             FROM      manager_hierarchy  dmr
             JOIN      manager_hierarchy      mh   ON   dmr.full_name IN ( level_0_manager_name
                                                                   , level_1_manager_name
                                                , level_2_manager_name
                                                , level_3_manager_name
             GROUP BY  dmr.full_name
         )                    src
    ON     ( dst.full_name  = src.full_name )
    WHEN MATCHED THEN UPDATE
    SET     dst.manager_level_number = src.manager_level_number
    Edited by: user599926 on Jun 4, 2013 9:41 PM

  • How to capture the selected values from module pool dialog list box !

    Hi experts,
    Can anyone help me out in capturing the values from the list box.
    i am able to set the values in the list box.But i am not able to capture the selected value from the list box. Always the list box name is getting as "space"
    I also tried in using the FM "VRM_GET_VALUES" but it is retireving all the values. Is there is any flag for filttering out the selected value.
    Your inputs are appreciated.
    Thanks,
    Vijay.

    Along with the PBO and PAI event, add a POV event in the flow logic of the screen
    DEMO_DROPDOWN_LIST_BOX -is a good demo example.
    PROCESS ON VALUE-REQUEST.
    FIELD structure_name-field_name MODULE create_dropdown_box.
    In the report :
    MODULE create_dropdown_box INPUT.
      SELECT carrid carrname
                    FROM scarr
                    INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
           EXPORTING
                retfield        = 'CARRID'
                value_org       = 'S'
           TABLES
                value_tab       = itab_carrid
           EXCEPTIONS
                parameter_error = 1
                no_values_found = 2
                OTHERS          = 3.
      IF sy-subrc <> 0.
      ENDIF.
    ENDMODULE.
    In the layout, assign a Function Code , for eg : 'SELECTED' to the listbox and lets say name of the field is SDYN_CONN-CARRID. So in the PAI module,
    MODULE user_command_0100 INPUT.
      CASE ok_code.
        WHEN 'SELECTED'.
          MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
      ENDCASE.
    ENDMODULE.
    sdyb_conn-carrid will contain your selected field

  • Renaming files using a list of names in a txt or csv file

    Hello everyone,
    I'm trying to use AppleScript (although I'm a total noob to it) to rename the files in a folder (if possible using something like this - set folder to choose folder) to coincide to a list of names (in a txt or csv - can be any extension needed).
    To paint the picture clearer I'll have something like this
    Files_as_they_are
    Files_renamed
    01.mkv
    Valar Dohaeris.mkv
    02.mkv
    Mhysa.mkv
    Here is what I've tryed so far : (some point through the night I've tryed to repeat part of the process thus the "fcount" but the result was even worse)
    set theFolder to choose folder
    set ep to {"Valar Dohaeris", "Dark Wings, Dark Words"}
    set fcount to 1
    tell application "Finder"
      set name of file fcount of theFolder to item fcount of ep
    end tell
    set fcount to fcount + 1
    Tnx in advance...

    This will work with a comma separated text file,
    i.e.:
         Files as the are, Files Renamed
         01.mkv, Valar Dohaeris.mkv
         02.mkv, Mhysa.mkv
    Note that if the file to be renamed exists, it will be overwritten (A test can be added to skip if exists if needed)
    set theFoler to POSIX path of (choose folder with prompt "Choose folder with Files" default location path to desktop)
    set theFile to POSIX path of (choose file with prompt "Choose TXT file" default location path to desktop)
    do shell script "
    cd " & quoted form of theFoler & "
    while read line  
    do  
         OldImageName=${line%,*}
         NewImageName=${line#*,}
         if [ -e \"$OldImageName\" ] ; then
              mv \"$OldImageName\" \"$NewImageName\"
         else
              echo \"$OldImageName\" >> ~/Desktop/Errors.txt
         fi
    done < " & quoted form of theFile & "

  • One of the folders of Robo Help Project Manager is listed twice in Windows Explorer.

    Hello Everybody,
    One of the folders of Robo Help Project Manager is listed twice in Windows Explorer. One has all the subfolders and topics of it and the other has all the subfolders but not the topics. How did I get into this kind of situation? Why do I have two folders? Can somebody please answer on this?
    Since my RH project is attached to Visual Source Safe (VSS), the same structure is mirroring in VSS.

    Hi there
    After reviewing the image I see that what you might think are two of the same folder are two different folders similar in name.
    One is named Advanced_Functionality. The other is named Advanced_Funtionality (note the missing C).
    I'm assuming this is the folder you are referring to?
    Cheers... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

Maybe you are looking for