7916 module no longer recognized after system update.

Hello,
I have a UC540 with 6 7945 set and 1 7965 set with a 7916 expansion module.
we decided to update our system software from 7.1 to the new 8.6 firmware i found on the cisco website.
we were having an issue with our call park, and i thought that would fix it.
however, once the update was complete and all the phones came back up, the module is not being recognised by the 7965.
it lights up with the cisco logo and nothing else. Also, the 7965 does not see the module in its status list.
Did the module not get updated and thats why it doesn't see it, or did something else go wrong?
Any ideas would be appreciated.
Chris

1. Make sure the 7916 is still configured in the "type" setting for that ephone.
2. Make sure the 7916 firmware is installed on the UC500 and set up as a "load".
3. Check the physical connections.
4. Reboot the phone.
-Dan
Please rate useful posts.

Similar Messages

  • USB Hard Drive no longer recognized after SW Update

    I just updated Cisco software and my external hard drive is no longer recognized by Cisco.  It is a Seagate drive that is listed on the Cisco tested - passed - approved list.  It worked prior to this update.  I have disconnected the drive.  Reconnected it.  Rebooted.  Turned machine and router on and off and its still not recognized.  Any ideas?  Thank you, Jim S.
    Model name: Linksys E4200
    Model number: E4200
    Firmware version: 1.0.03 build 14
    Operating system: Windows 7 SP 1
    Software version: 1.4.11266.0
    Connection type (WAN): DHCP

    It's great to hear that everything is back up and running.
    However, just in case you missed some step while upgrading Cisco Connect or Firmware. These are the steps.
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=cd2cb366ce254f51a5bed7539b068fed_Updating_Cisco_Co...
    Link to download latest version of Cisco Connect & Firmware.
    http://homesupport.cisco.com/en-us/support/routers/E4200

  • [SOLVED] pure-ftpd no longer works after system update

    Hi,
    I made a system update today and since pure-ftpd doesn't want to start it just display "[FAIL]" but I don't have any error message.
    Is it possible to see the the error log of pure-ftpd ?
    Do you have any idea of how getting it working again?
    Thanks
    Last edited by clems45 (2011-04-02 21:41:23)

    I tried to check the version of pure-ftpd: pure-ftpd -V and it replies:
    pure-ftpd: error while loading shared libraries: libmysqlclient.so.16: cannot open shared object file: No such file or directory
    but mysql client is installed properly! I tried to reinstall it but it changed nothing

  • We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    Zap the PRAM and Reset the SMC, then try again.

  • Lack of 3g after system update

    Hello :-)
    It's problem with Xperia E dual
    Few days ago I updated the system to the 4.1.1 version (compilation 11.3.A.1.39).
    Unfortunatelly after updating I've discovered that smartphone don't works with 3G. On the display I've only icon "E". Before updating there was typically "H". Of course now the transfer is slower than before and of course I'm not happy of that.
    I try to solve this problem - choose in menu list of available provider and... there are only 2G nets. Because I've functioning still in the same place of live and the problem has occured after the updating I'm sure that it's strictly connected.
    Is there any solution for that?
    Another problem is with trying to call. After system updating typically twice a day I have to restart smartphone because it's totally hanged. No one can connect with me and I can't call to anybody. Smartphone looks normally and doesn't give any siglan that something is wrong. But when I try to connect to somebody I direst the number and... there is no signal at all. After few seconds telephon return to main menu. There is also no record about this trial of connection in the list of done connections. It's very uncomfortable situation.
    Sure, there are also some adventages with the system updating but problems mentioned above are really annoing.
    Have you any solutions for it?
    Thanks in advance.
    Rafal
    Solved!
    Go to Solution.

    Hi, try repairing phone software with PC Companion or Update Service.
    http://www.sonymobile.com/gb/tools/pc-companion/
    http://www.sonymobile.com/gb/tools/update-service/
    Be aware that this will erase phone data completely, backup if necessary.
    Before proceeding with software repair, confirm with your Network Operator that there is nothing wrong with the network. Also, remove and reinsert SIM card and try again (have a close look at the contact surface, ensure that it is relatively clean).
    Don't forget to mark correct answer as Accepted Solution.
    If you find the post helpful, press Kudos.

  • Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

    Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
    Ron Bell
    [email protected]

    Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
    I do not work for Mozilla but I do have experience of releasing software for public usage.
    Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
    You can go back to the old version of Firefox but that won't always solve your problem.
    The web site below tells you how:
    https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

  • [Solved] Can not build modules for VMware Player after kernel updates

    I have a problem generating the modules for VMware Player after kernel updates. I am using  VMware Player version 5.02 (without patches) and the softlink according to the Wiki.
    When I start the installation of the modules from the GUI, the program just closes. Running vmware-modconfig in the CLI generates the following log file:
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: Log for VMware Workstation pid=7478 version=9.0.2 build=build-1031769 option=Release
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: The process is 64-bit.
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: Host is Linux 3.8.10-1-ARCH 2012.11.29
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: Msg_Reset:
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": Datei oder Verzeichnis nicht gefunden.
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: ----------------------------------------
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: Msg_Reset:
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": Datei oder Verzeichnis nicht gefunden.
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: ----------------------------------------
    2013-04-29T09:49:27.891+01:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values.
    2013-04-29T09:49:27.891+01:00| vthread-3| W110: Logging to /tmp/vmware-root/vmware-modconfig-7478.log
    2013-04-29T09:49:27.892+01:00| vthread-3| W110: Icon name must be set.
    Interestingly, after deinstallation and reinstallation the VMWare Player works fine.
    Any hint, what's going wrong?
    Last edited by Thomas_Do (2013-08-07 07:25:51)

    Today, (Kernel  3.10.5-1, VMware Player version 5.02 with kernel patches) the modules could successful be generated from the CLI:
    vmware-modconfig --console --install-all
    Solved (somehow).

  • How to turn off alarm after system update?

    I get alarm when restarting my T400 after system update. Can anyone give me suggestions to turn off this alarm?
    Thanks,

    I have no display > powercontrol in openbox, gnome or fluxbox, What are you talking about?

  • IPod Nano 3G lo longer recognized after Update to iTunes 9 on Vista 32 Ulti

    So i updatedt to iTunes 9 yesterday - only to find out that my iPod 3G is no longer recognized by iTunes. Also my 2G are not recognized any longer on this machine
    ALL three iPods still work fine with my other computer whicgh is running the same Windows version but has still iTunes 8 installed.
    With the IPod service disabled the iPods appear properly as a device - they show their assigned name and you can browse the content.
    When the service is enabled and you start iTunes iTunes displays a message that says that it "discoveerd" the iPod but could not identify it
    see heer http://0711.diy-punk.net/WOW/ipodfu.jpg
    also as soon as iTunes gets involved the device is no longerreadable under Windows
    i tried multiple reboots, restart of iPod service, rebooted the iPod, resetted the iPod - nothing helps...
    This is the iTunes diagnois (in german, sorry)
    Microsoft Windows Vista Ultimate Edition Service Pack 1 (Build 6001)
    System manufacturer System Product Name
    iTunes 9.0.0.70
    QuickTime 7.6.4
    FairPlay 1.5.18
    Apple Application Support 1.0
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.6.0.32
    Apple Mobile Device Driver 1.45.0.0
    Bonjour 1.0.6.2 (118.5)
    iTunes-Seriennummer 4408A0FF9EFAA0D3
    Aktueller Benutzer ist kein Administrator.
    Aktuelles Datum und Uhrzeit sind 2009-09-15 18:26:25.
    iTunes befindet sich nicht im abgesicherten Modus.
    Info zu Video-Anzeige
    NVIDIA, NVIDIA GeForce GTX 275
    ** Info für externe Plug-Ins **
    Plug-In-Name: AMIP (stub)
    Plug-In geladen: Ja
    Plug-In-Version: 0.8
    Plug-In-Dateiversion: 0.5.0.0
    Plug-In-Pfad: C:\Program Files\iTunes\Plug-ins\ituneswrapper.dll
    Plug-In-Name: Last.fm AudioScrobbler
    Plug-In geladen: Ja
    Plug-In-Version: 0.0.2
    Plug-In-Dateiversion: 3.0.2.0
    Plug-In-Pfad: C:\Program Files\iTunes\Plug-ins\itw_scrobbler.dll
    Genius-ID: f2f8282b830c835751cb597904744cb8
    ** Verbindungstests für iPod/iPhone **
    iPodService 9.0.0.70 arbeitet zurzeit.
    iTunesHelper 9.0.0.70 arbeitet zurzeit.
    Apple Mobile Device service 2.50.39.0 arbeitet zurzeit.
    Universal Serial Bus Controller:
    Intel(R) ICH10 Family USB Universal Host Controller - 3A34. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A35. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A36. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A37. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A38. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Universal Host Controller - 3A39. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3A. Gerät funktioniert wie vorgesehen.
    Intel(R) ICH10 Family USB Enhanced Host Controller - 3A3C. Gerät funktioniert wie vorgesehen.
    FireWire-Host-Controller (IEEE 1394):
    AGERE OHCI Compliant IEEE 1394 Host Controller. Gerät funktioniert wie vorgesehen.
    Zuletzt angeschlossenes, jetzt nicht verbundenes Gerät:
    iPod nano (3. Generation) mit Firmwareversion 1.1.3
    Seriennummer: YM741YNKYXT
    ** Sync-Tests für iPhone/iPod touch **
    Kein iPhone oder iPod gefunden

    Yeah... I hope apple solves this problem soon. =\
    I use Windows XP instead of Vista...
    This happened to me:
    I plugged my iPod
    Oppened the iTunes, iTunes recognized the iPod with all the songs, album covers, playlists, etc.
    It asked for update. (Download & Instal, ok)
    Finished the update, oppened the iTunes 9.0. Added a new songs but then I realized it didn't recognize the iPod (wich was plugged.)
    I checked on "My computer" and I saw "iPod". Ok.
    When I ejected the iPod it was clean. No musics, no Videos, no playlists. Started on the screen "Select your language".
    I Tried reinstaling the iTunes but whenever I got an older version it said something like "The iTunes can't be started because the iTunes library has been generated by a new version."
    Restarted my PC several times.
    Rebooted the iPod.
    Tried switching USBs.
    NOTHING works.
    Nothing at all.
    even tryed the manage thing on "My Computer".
    If they don't find a way of fixing this bug my iPod Nano is not better than a f**kin' Pendrive... ~.~"
    Hope apple do something...

  • My Local Adjustment Brushes no longer recognized after LR 4.3 update

    After running 4.3 update, my local adjsutment brushes are no longer recognized and appearing in the Lightroom GUI.  They are all still located under 'Lightroom' folder --> 'Local Adjustment Brushes' folder (nothing has changed and I see all files are still there in Finder), but no matter how many times I've restarted LR, they are not showing up in the GUI.
    Please advise ASAP!!  Thank you

    It's not clear from your initial problem description, but are you talking about local adjustment presets that you have created yourself (i.e. user presets), or are you talking about the standard presets supplied by Lightroom (Burn, Dodge, Soften Skin, etc)?
    If it's the latter, go to Preferences>Presets Tab and click on "Restore Local Adjustment Presets".

  • My iPad will not sync after system update and returns message that my computer is no longer authorised.

    Please help me sync my iPad as it is not able to sync after a system update.  Several messages 1. Computer no longer authorised and when I reauthorise it it prepares to sync and then it tells me my iPad cannot be written to,

    Hi leefromwoodford,
    The following article will tell you how to transfer purchased music from your iPhone to the your Mac -
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    Specifically -
    Transferring purchases
    If your iPhone, iPad, or iPod has your purchased content from the iTunes Store, you can transfer the content to a computer that is authorized for your Apple ID.
    Note: This option only works for content you purchased from the iTunes Store (as opposed to content from other sources, such as CDs you may have imported). For content you did not purchase from the iTunes Store, synchronization occurs in one direction only. This means your content can be copied from a computer to your iOS device, but cannot be copied from your device to a computer.
    Open iTunes.
    From the Store menu, choose Authorize This Computer.
    Enter your Apple ID and password. Then, click the Authorize button.
    Connect your device your computer. If it is synced with another iTunes library, you may be asked if you want to "Erase and Sync" or "Transfer Purchases."
    If that alert appears, click Transfer Purchases.
    Important: Clicking Erase and Sync will delete any existing content currently on your device. The content would then be replaced with the content that is on the computer.
    If you were not offered the option to transfer purchases:
    After connecting your device to the computer, its icon appears in iTunes. Click the icon.
    From the File > Devices menu, choose "Transfer Purchases from 'Your device name.'"
    Note that the computer must be authorized for the Apple ID under which the purchases were made.
    You may also want to download the music directly from the iTunes store, rather than using the iPhone. See this article -
    Download past purchases
    http://support.apple.com/kb/HT2519
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My Apple ID is no longer being recognized after IOS5 update

    My Apple ID is no longer being recognized after upgrading my I-Phone to IOS5.  When trying to update my aps, it asks for the password and doesn't recognize it when I enter it.  I've been through the entire "Forgot my ID" process, but nothing's working.  Can anyone help please?

    Me too my real worry is that we will not be able to download software updates as it seems to me that the original software was installed using the old ID

  • Firewire drive no longer recognized after upgrade?

    having an onset of problems the last 2 weeks.
    first upgraded to 10.4.6 on mac mini 1.42 non-duo, worked a few days than acted weird with apps crashing. had to reinstall from 10.4 disk. seemed ok. repaired permissions, ect. after reinstall (and a subsequent power outage) a firewire drive attached at time was no longer recognized by mac mini or connected imacG3. reinstalled 10.4.2 on mac mini. installer unable to reinstall 10.4.6., I would like to have firewire drive recognized again. when attached to other firewire drive in daisy chain, says device unrecognized, other wise unable to get any info on drive. what to do?

    I am having nearly the exact same issue as you are experiencing. My Western Digital Dual-Option Media Center 160 GB FW HD is going in and out big time. It seems to be there for a time but then conks out. I have to disconnect the power and now the drive seems to be malfunctioning.
    Same story with my LaCie 52x CD Burner. I placed the Disk Warrior CD in there and the computer recognized the disc at first but then spinning beach balls galore!
    This has to be one of the worst updates to an OS X system I can remember. I can only think PowerPC QA testing has gone through the toilet since the Intel move was completed.

  • Standard PCI to PCI bridge no longer working after BIOS update

    Hey everyone,
    Before I get into the details of what is probably the most frustrating computer problem I have ever faced I would first like to say hello because this is my first post and I give you my system specs.
    Windows 7 ultimate x64
    GA-M61PME-S2P (rev 1.0) MOBO
    2x 120GB Mushkin SSD @3.5gbps Raid 0
    AMD Phenom II x4 @2.2 GHZ (Old processor that I replaced)
    AMD Phenom II 1090T x6 @ 3.2GHZ (New processor that replaced the Phenom x4)
    MSI Cyclone GTX 550 TI OC (Nvidia)
    8 Gigs 800mhz DDR2 RAM (Computer Bay)
    I have had a GA-M61PME-S2P (rev 1.0) board for several years now and have never had any problems. I recently bought a brand new AMD phenom II x6 1090T processor because it was listed as being supported by my board. The BIOS version that I had installed before purchasing this processor (version F5) was unable to recognize my new processor and boot so I had to update to the latest version (version F7b). After flashing my BIOS with the new version I was able to boot and my computer recognized my processor with the correct name and clock speeds. Unfortunately it now no longer recognizes one of my standard PCI to PCI bridges. Of the two standard PCI to PCI bridges listed in device manager one of them has a yellow exclamation point and reads "error code 35 firmware does not contain enough info to configure this device". I have tried everything I can think of but just cant seem to get my processor and graphics card to work under the same BIOS version. I will now list every step I have taken;
    1.)  I have re-flashed several times between versions F5 and F7b but always get the same results
    2.)  I have used Driver cleaner in safe mode to wipe all drivers and then double checked programs and features to make sure nothing was still installed.
    3.)  I have installed all drivers for the board from Gigabytes website, although when I try to install the VGA driver i get an error saying that no device could be found that supports the driver.
    4.) I once again wiped everything in safe mode and then found the latest chipset drivers for nvidia Nforce from NVidia's site but got the same results.
    5.) I tried downloading the F7b BIOS from some random website  just in case the file from Gigabyte was somehow broken but this did not change anything. (I know that's generally a bad idea but I am desperate)
    6.) I uninstalled the problem standard PCI to PCI bridge in device manager and restarted my computer but got the same results.
    7.) I tried installing my graphics card drivers from MSI but got an error saying that no supported hardware could be found.
    8.) I tried installing a number of different versions of the Nvidia graphics card drivers for my series but kept getting that same error message
    9.) I downloaded the Graphics card detector program that NVidia provides on their site but it told me that it could not detect my graphics card.
    10.) I tried Flashing my BIOS to the F6 version for the rev 1.3 board but this turned out to be a huge mistake because my computer would no longer post after this and I had to use a FAT32 flash drive and the q-flash utility to bring it back to life.
    11.) I checked over and over and over again that my BIOS settings were right and nothing was setup to only use on-board graphics.
    12.) I tried downloading a driver that was supposedly for the PCI to PCI bridge but im fairly sure this was just a trojan because the install did not complete and I found tons of fun plugins installed afterwards (I reformatted shortly after this).
    13.) I made sure that my new processor was plugged in and that my BIOS was version F7b and then completely wiped my hard drive and re-installed windows 7 ultimate x64 but got the same results.
    14.) I made a bootable DOS flash drive and tried updating my Graphics card BIOS but found that I already have the latest version.
    What I don't understand is that my graphics card works perfectly with BIOS version F5 and my processor works perfectly with BIOS version F7b but under no circumstance do they both work at the same time. It may be worth noting that with version F7b installed I am still able to use my graphics card ( my Monitor is plugged into it via DVI) It just gives me the error under device manager and I can not install any drivers. 
    If anyone out there can help me I will be insanely grateful and will refer to you from then on as the master of all things MSI. I'm at my wits end,  If you need any further info just ask and I will provide.

    Ah ok I was afraid you were going to say that. I will take this to gigabyte then but just so I know, This PCI to PCI bridge problem couldn't have anything to do with my MSI graphics card BIOS somehow not being compatible with the Gigabyte BIOS?
    -Thank you!

  • [solved] Pulseaudio doesn't detect sound card after system update

    Before a recent system update I had pulseaudio working flawlessly, but after doing a recent system update with pacman -Syu,
    pulseaudio no longer sees my sound card and only displays the Dummy audio device.  Among the packages updated that I can
    remember off the top of my head are the Linux keneral, udev, kmod, instead of trying to roll back my system I figured I would try
    to fix the issue.  The only thing suggested in the Pulseaudio wiki is that a asound.conf directory is overriding the /etc/asound.conf
    file which is not the case on my system.
    Looking at the output from lsmod I can see where the kernel modules for the sound card is getting loaded
    snd_hda_intel 23375 0
    snd_hda_codec 89160 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi
    snd_hwdep 6389 1 snd_hda_codec
    snd_pcm 74780 3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
    snd_page_alloc 7153 2 snd_pcm,snd_hda_intel
    snd_timer 19544 1 snd_pcm
    and looking at the output from the ps command I can see that pulseaudio is getting started
    1190 ? S<l 0:00 /usr/bin/pulseaudio --start
    1195 ? S 0:00 \_ /usr/lib/pulse/gconf-helper
    but pacmd list still reports this
    0 card(s) available.
    0 sink input(s) available.
    0 source outputs(s) available.
    0 cache entrie(s) available.
    Here is the output of pacmd dump if it helps
    ### Configuration dump generated at Thu Feb 16 08:45:56 2012
    load-module module-device-restore
    load-module module-stream-restore
    load-module module-card-restore
    load-module module-augment-properties
    load-module module-udev-detect tsched=0
    load-module module-jackdbus-detect
    load-module module-bluetooth-discover
    load-module module-esound-protocol-unix
    load-module module-native-protocol-unix
    load-module module-gconf
    load-module module-default-device-restore
    load-module module-rescue-streams
    load-module module-null-sink sink_name=auto_null sink_properties='device.description="Dummy Output"'
    load-module module-always-sink
    load-module module-intended-roles
    load-module module-suspend-on-idle
    load-module module-console-kit
    load-module module-position-event-sounds
    load-module module-cork-music-on-phone
    load-module module-filter-heuristics
    load-module module-filter-apply
    load-module module-dbus-protocol
    load-module module-x11-publish display=:0.0
    load-module module-cli-protocol-unix
    set-sink-volume auto_null 0x10000
    set-sink-mute auto_null no
    suspend-sink auto_null yes
    set-source-volume auto_null.monitor 0x10000
    set-source-mute auto_null.monitor no
    suspend-source auto_null.monitor yes
    set-default-sink auto_null
    set-default-source auto_null.monitor
    ### EOF
    EDIT: I should also add that fuser -v /dev/snd/* returns nothing and fuser -v /dev/dsp returns "Specified filename /dev/dsp does not exist".
    Last edited by vendion (2012-03-02 23:26:28)

    Digging into this further aplay -L gives different output based off of whether or not I ran is as my normal user or with sudo/as root.
    As a user (which is how pulseaudio is also being ran):
    > aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    as root it does see both my sound cards when I run it with sudo or as root:
    > sudo aplay -L
    Password:
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=SB
    HDA ATI SB, ALC887-VD Analog
    Default Audio Device
    front:CARD=SB,DEV=0
    HDA ATI SB, ALC887-VD Analog
    Front speakers
    surround40:CARD=SB,DEV=0
    HDA ATI SB, ALC887-VD Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=SB,DEV=0
    HDA ATI SB, ALC887-VD Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=SB,DEV=0
    HDA ATI SB, ALC887-VD Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=SB,DEV=0
    HDA ATI SB, ALC887-VD Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=SB,DEV=0
    HDA ATI SB, ALC887-VD Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=SB,DEV=0
    HDA ATI SB, ALC887-VD Digital
    IEC958 (S/PDIF) Digital Audio Output
    hdmi:CARD=HDMI,DEV=0
    HDA ATI HDMI, HDMI 0
    HDMI Audio Output
    This behavior is confusing to me, and if someone knows what is going on and how to fix it I really want to get sound with pulseaudio working and have sound again.

Maybe you are looking for