7920 cannot register with AP after firmware upgrade

We have a customer using 7920 with Firmware 1.08.
He tries to test the Beta firmware (cmterm_7920_3.3.02_05_005.bin) on some 7920.
The upgrade finished correctly and after reconfiguration, 7920 register to the APS.
On two devices, he got a problem:
- The configuration menu is hidden. We try to enter the sequence *## send but without success.
- The reset with sequence *7#9#2#0#* is not working (it was working on other 7920 when locked by password)
- USB parameter is hidden, so we cannot activate it.
- We try to download an old firmware (cmterm_7920_3.3.01.03.bin) trough USB port, using the boot function after power on, but we got the message: ERR304-Memory insufficient to upload the firmware image.
- We try to use an AP with basic configuration, broadcasting SSID cisco or tsunami, but 7920 stay with the message No AP found.
So, these two 7920 are unusable now.
Have you any suggestion? Daniel Bill

First off 02-05-005 is not a 7920 image. He may be using 02-01-XXX, which is an engineering image and shouldn't be used in production. Can try Menu->*##->Send then config menus will be unhidden.
Also *7#9#2#0#*, will just factory default the phone if phone lock is enabled, where you are prompted for a password at power on.
Are you saying the phone will not boot now? If so, then call TAC. If they can boot, you can enter admin secret to expose hidden menus and enable usb to upload the firmware via USB or either configure the 802.11b paramaters to upload via TFTP wirelessly.

Similar Messages

N97 cannot use as modem after firmware upgrade

Hi, sorry if this is a repeat post but driven to distraction.
I use my N97 as a modem to connect to the internet from my laptop when I'm away from home. Since upgrading the firmware I cannot connect through 1 touch access or direct through dial up.
When attempting to connect through 1 touch I get as far as connecting device and then I get the message "Failed to connect device".
I have removed the modem through internet properties and reinstalled PC Suite (after using PC suite cleaner). I am running windows 7 but was connecting through 7 before the firmware upgrade.
Now I'm at a loss. Anyone got any ideas?

Saw another post here that said they make a completely new network with a different name and it worked. I decided to give it a try and it actually did work!!! Don't have any clue why but I don't really care since my network is running again.

How itunes cannot sychrnoise with iphone after upgrading latest IOS

why itunes cannot sychrnonise with iphone after upgrading the latest IOS?

Sounds like your iPhone was previously hacked/jailbroken. If true, try using google.

T410i SSD user and master password problem after firmware upgrade

Hello.
I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
Previous firmware version: 1.3
Current firmware version: 1.3.3
SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

Crippled 192.168.1.1 page after firmware upgrade

hi,
i recently upgraded the firmware of my WRT160N V2 to 2.0.03.
but since then when i login i get a crippled page on 192.168.1.1 with not even a menu. so i cant even downgrade. is there something i can do?

It is good to know that the issue is resolved
After firmware upgrade it is always recommended to reset and reconfigure the router and I think that is why you were unable to see the menu on the setup page of your router.

PC-Suite sync fails after Firmware upgrade of E65

After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
- PC-Suite updated to 7.0.9.2
- Outlook 2003
- XP Prof.
Any ideas?
Solved!
Go to Solution.

The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
Does somebody has an idea?

Notes has stoped sync with icloud after I upgraded to 7.0.2?

Notes (on my iPhone and iPad) has stoped sync with icloud after I upgraded to 7.0.2. All others items like Contacts, Calendars, etc. are able to sync. any solutions.

Now iTunes won't open. It doesn't give me any error messages it just won't open the window.
some preliminary questions aimed at narrowing in on possible culprits.
(1) do you have Norton Internet Security 2005 installed on the PC?
(2) try launching your QuickTime. does it:
(a) launch perfectly fine?
(b) fail to launch with an error message? (if so, what does it say?)
(c) exhibit other peculiar behavior? (if so, could you describe it for us?)
(3) reboot the PC. bring up your Task Manager, and click on the "Processes" tab. now try to launch itunes again.
does an "itunes.exe" process appear in the Processes tab? if so, does it persist in there or does it disappear after a few seconds?

HT4623 iPhone 4s will not register with server after iOS 6 update

My iPhone 4s will not register with server after iOS 6 update. Does anyone has similar problem?

Obviously since you have iOS 7 you're a developer. As a developer, you signed a NDA with Apple not to discuss the iOS on a public forum. Please log in to the Developer Forum using your credentials and ask for help there, lest you risk having your credentials terminated.
Thanks, and best of luck to you.
GDG

I cannot download sny apps after i upgrade to IOS6 ,message keep telling me ' Your session has timed out. Try again. I need help ��

cannot download sny apps after i upgrade to IOS6 ,message keep telling me ' Your session has timed out. Try again. I need help

From Apple Support...
Here are troubleshooting steps that should help you fix the problem.
1) Quit App Store in multi-tasking.
2) Tap Settings.
3) Tap Safari.
4) Tap Clear History.
5) Tap the Clear History button.
6) Tap Clear Cookies and Data.
7) Tap the Clear Cookies and Data button.
Try purchasing an app again from the device to get the security question prompt. You really need to set up the security question.
...it seems to have worked for me.....

You Cannot select assembly order for deletion error with BAPI_SALESORDER_CAHNGE after EHP6 upgrade

Hi All,
We are using Z transaction to update Wbs element data to sales order line item through BAPI_SALESORDER_CHANGE. After EHP6 upgrade while updating Wbs element data to old sales orders(Created before EHP6 upgrade) we are getting You cannot select assembly order < order number> for deletion (V1 748) error in BAPI return table, For multiple Sales order run.
But if we run the same order individually it is getting processed successfully. W e are passing the same values in individual and multiple case.
We debugged the BAPI and found one more error related to Authorization, But BAPI return table is giving different error (V1 748)message. Please help us in finding the issue.

Hi Sujay..
Please check.
http://help.sap.com/saphelp_47x200/helpdata/en/b7/58c4c87e0811d2b66a0000e82d8bd1/frameset.htm

HP8600 Plus won't send or receive fax after firmware upgrade

Hi All,
Suddenly my HP8600, refuses to send or receive fax. I get the message "Can'r send or receive fax" immediatley after power up. I have a strong feeling that the problem started after an automatic firmware upgrade to version OJP8600_N911a_R1435A . Unfortunately there does not seem to be a simple way to downgrade or is there? HP refuses to tell. I have checked the telphone line and the connection also tested with another fax machine. I tried resetting several times without any success. It is just out of warranty and works perfectly in all other respects.
Do someone have any ideas?
Thanks in advance.
Bondra12

Hello @Bondra12 , welcome to the forums
I understand you now cannot send or receive a fax, and I am here to share my suggestions with you.
No, you cannot reverse a firmware upgrade from my knowledge. I would suggest however, troubleshooting the fax problem by trying out the steps from this guide: Cannot Send or Receive Faxes
If the problem does happen to continue, and I wish that it doesn't, to give us a call to see if you have any out of warranty printer options.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Best wishes,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Linksys SRW224G4 Fail After Firmware upgrade

Hello Everyone,
I am a newbie in this forum, so please excuse me If I may not make all things right.
I have a serious problem with my Linksys SRW224G4 managed switch.
After the one and only time that I have tried to update its Firmware, a couple of weeks ago,
although that the firmware upgrade ended with a success, When I tried to reboot the switch
the device went broken. Now it does not recieve an IP from the DHCP, hence I cannot see it in a list
with the IP scanner.
I have read and followed the manual, in order to be able to connect to the switch with Hyper Terminal
via an RS232 serial port cable and managed to reach up to the following screenshot.

It's not unrecoverable. It just looks like the existing image didn't take and the boot process wants you to load a new one over the serial link. You're using HyperTerminal, so you already have what's necessary to load the image.
As soon as the switch indicates that it's downloading code using XMODEM, select the file transfer option in the HyperTerminal menu and upload the "SRW2xxG4_FW_1.2.3.0.ros" file using XMODEM. It will take awhile, but should recover the switch.
Also, make absolutely sure that you're using an SRW224G4 revision 1.1. If you upload the firmware from the 1.0 firmware, this sort of thing will happen.
If you happen to have a revision 1.0 switch, you can still recover it via XMODEM, but use the "fesm-12216.ros" firmware instead.

Battery life of 15 Minutes after Firmware Upgrade

Now that my system has had the firmware upgrade, I dont get more than about 5 minutes of battery life.
Prior to that I was getting a good 2.5-3 hours ish.
Now, it dies after 5 minutes.
I find it suspicious that this happened immediately after the FMC firmware upgrade.
I understand that the firmware cannot be downgraded easily.
Or is there, please let me know.

Recently my battery on my 15" MacBook started reporting 75% in the OS but the system would shutdown without notice -- also, when I put the computer to sleep (sometimes for only 20 minutes) it would completely lose its charge and shut down.
This started happening after I loaded the new firmware, but I thought it was related to a failing battery, not the FW update… now I’m curious.
I purchased a new "spare" and sent the original one back to Apple for testing. The spare has not had any problems since, but it has only been a few days. I've heard nothing back on the other battery.
I’ll post back if I have any problems with the replacement.

No contacs after firmware upgrade on N70

Hi
I did a firmware upgrade yesterday on my N70 using NSU. Of course I did a backup using the uptodate Nokia PC suite. After the firmware upgrade I saved the data back to the phone aagin using the Nokia PC suite. Everything looks good except that no contacts are there.
I did the upgrade again just to make sure that everything went OK with the same result.
Can some help or has the same problem?
Firmware V 5.0638.3.0.1 18-09-06 RM-84
PC Windows XP SP2
Nokia PC Suite 6.82.22.0
NSU 1.2.0en
Best regards
Chris

not sure about your PC Suite version but this has been well documented in these forums and I had the same problem and with N70. I think it was mentioned as a PC Suite issue, or a combined PC Suite issue N70 issue with many people reporting it. Anyway nothing you can do but enter your contacts or transfer from another phone

HP Laserjet p1102w - after firmware upgrade / Smart Install update - down to 1MB free memory

Hello,
I have a Laserjet p1102w running off a laptop with Windows 7 64-bit. Just bought the printer this month.
After updating the firmware to 20120814 version and updating the SmartInstall update utility for the 20120814 version as well, I am now down to 1 MB free memory (out of 8MB originally). [Another LJ p1102w updated prior to these updates has 3MB free memory.]
Because I have 1MB free memory, the printer is almost a brick. It can print simple text based pages - however, printing any page with a graphic or a PDF file will cause the printer to take forever to receive data - essentially preventing printing a page on my new printer (while printing the same page instantaneously on my older nonupdated p1102w).
Is there any way to fix this problem, given there is no memory upgrade option? Otherwise, this printer is a brick.
Thank you in advance for a reply - especially from HP.

Hi cyskim,
Did you tried turning the printer off and on after updating the firmware? This should clear its memory, including any memory may affected during the firmware upgrade proccess .
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

7920 cannot register with AP after firmware upgrade

Similar Messages

Maybe you are looking for