7920 Config Utility

I download the Cisco Wireless IP Phone 7920 Configuration Utility (http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser-crypto). And I tried to connect my USB cable to it and it did not recongize it. I am running WIndows XP. I noticed in the C7920USB.INF file that it doens't list Windows XP. Does anyone have the latest drivers?
Thanks.

So after installing the software, you have to enable USB on the 7920 (Menu->Phone Settings->USB Enable/Disable). This will then auto-install the driver for you. Then launch the utility and will assign a dhcp address to your pc nic (192.168.1.2) and the login prompt will appear. Good luck!

Similar Messages

  • 7920 Config utility ver 3.0 Problem Connecting to Phon

    Using the 7920 Config Utility 3.0. I have my 7920 phone Im trying to program... The system goes ONLINE to the phone just fine, but when I try to export the config to the phone, I get an ERR 300 "TFTP FAILS IN IMPORTING CONFIGURATION FILE." Then TFTP Server Port Number:69 , Connection Reset By Phone.
    I cannot get it to work and its very frustrating... any help is appreciated!!!

    Please be sure you are following the Installation guide for 7920 config utility.7920 USB NIC is supposed to be set for DHCP. Also ensure you are not running any TFTP server application on the PC that will also use port 69.The Configuration Utility has limited DHCP server capabilities. If the USB interface of the Cisco Wireless IP Phone 7920 is set to DHCP, the IP address should be 192.168.1.X to allow network communication between the Cisco 7920 Wireless IP Phone and the PC. The config utility will assign an IP to the PC's USB NIC.

  • 3gs is not recognized by iTunes or iPhone config. utility.

    my 3gs is only running 3.1.2, when trying to run the config utility i got the error code 0xE8000065, iTunes gave me error code kAMD Read Eror. im running windows 7. Any help with this would be terrific! Thanks

    I have the same problem with my iPhone 4 - since updating to iTunes 10.1.1 I my iPhone is not recognised by iTunes. I have reinstalled and done all of Apple's suggestions up to the point of messing with the deep settings in Windows (I'm not confident that I won't mess up other things if I do this). The computer recognises the iPhone but iTunes ignores it. Come on Apple - how about a simple fix that doesn't require a nerdy ability to delve into the depths of software settings!

  • How can i cancel a password i set in the html config utility for laserjet p1102w under mac osx 10.6?

    After setting a password in the Networking tab of the HTML Config Utility for HP Laserjet P1102w under MAC OSx 10.6, I cannot access either the settings or the Networking tabs again. How can I access them or just cancel the password I set?

    hi,
    I beleive your question has been answered in a different post
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Reset-the-admin-password-on-the-web-pag...
    hope this helps
    Russ@HP
    Say thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution
    (Although I am employed by HP, I am speaking for myself and not for HP)
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++

  • IPhone Config Util stealing control from iTunes

    I installed iPhone Config Util and now it appears that when I attempt to sync the iPhone, iPhoto sees it but iTunes does not. Is there a way I can give control back to iTunes. I am not intending to manage the iPhone on an enterprise.

    Hmmm... It appears that all my Login items were removed from my account and iTunesHelper was the one which would allow iTunes to connect (noticed all this after rebooting the machine). iTunes will now recognize it if I manually start iTunes but will not auto-start when the iPhone is docked. Could not find iTunesHelper.
    Does anyone know where I can find iTunesHelper so I can add it to the Login items?
    I apologize if this does not belong on this list but this problem (of no Login items) appeared after upgrading Server Admin and adding iPhone Config Util to a newly upgraded 10.6 machine (non server).
    Paul

  • Iphone config utility for Mac OS 10.5

    Is there an iphone config utility for Mac OS 10.5?

    Problem: Just got a new IMAC with System 10.5.4, now my Cisco VPN doesn't work. I had my files professionally transferred, vpn worked on my other IMAC, now it doesn't (Error 51). I downloaded vpnclient-darwin-4.9.01.0100-universal-k9.dmg, this version didn't work either (Error 51).
    I have tried everything from repairing permissions to entering code in my terminal and still get the error. Any solutions to this frustrating problem? I have spent hours looking for solutions and rely on my VPN for work, so I need help fast!
    Thanks to anyone with advice.

  • IPhone config utility won't work after Mavericks upgrade

    After my upgrade to Maverics, any time I try to use the iPhone Config Utility to install apps on my devices, when I click install, it crashes iPhone config utility.  I've already tried re-installing iPhone Config Utility - Any recommendations?  This is killing my productivity!

    If you are using the Apple configurator there is an update Apple has reasleased for it for support for Mavericks. It seems to be working for me but I'm also using it with the iPad 4th gen.

  • Does iPhone Config Utility Have an admin password to override?

    Hey guys,
    Very new to the iPhone Config Utility. I'm wondering if it's possible to limit a phone (or iPad actually) using the iPhone Config Utility, BUT have an admin password that overrides those limitations? So:
    1) install a limited profile on an iPad
    2) when they need an app installed (for instance) they just hand the iPad to IT, who has a "magic" password and installs that approved app, then logs back out.

    Real sorry guys, even though it's been 2 years since original post, but I've fixed it.
    I am using iPCU 3.6.2.300 and the problem was not on the iPCU, but, you can fix your image on Photoshop like below:
    iPad (Retina display) 152x152px; Resolution: 72 px/inch; Save as Bitmap (.bmp) with OS/2 file format.
    and for other devices, just follow the guidelines for size (in pixels) at the iOS Developer Library here, with resolution either 72px/inch or 96px/inch. Just remember to save as Bitmap with OS/2 file format, not Windows.
    Regards,
    Phillmont.

  • After reconfiguring shared service using Config utility

    Hi,
    I am unable to see my applications under Projects after reconfiguration from Config utility, i selected reuse existing tables. Does it require any additonal steps to see my existing applications under projects?
    Secondly i have backup for openLdap, but not relational backup of shared services before reconfiguration. is there any possibilty to recover HSS with openldap backup (no backup available for RDBMS)?
    Any solution to this problem.

    I am hoping this is not related to the post yesterday where I advised against running the config utility again.
    First of all if you ever run the config utility you should make sure you definitely have a backup of everything.
    Unfortunatey it sounds like the registration to the products has been lost, shared services db holds information relating to product registration, Openldap contains the provisioning information.
    You may end up having to reregister the products with shared services.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • HT4839 PLEASE HELP!!!  I am simply trying to update the APN settings on my Iphone3 AT&T carried Straight Talk SIM phone.  For some reason, when I enter the Straight Talk APN info in the Config Utility and click "Install", NOTHING HAPPENS.  WHY?

    PLEASE HELP!!!  I am simply trying to update the APN settings on my Iphone3 AT&T carried Straight Talk SIM phone.  For some reason, when I enter the Straight Talk APN info in the Config Utility and click "Install", NOTHING HAPPENS.  WHY?  I have spent almost 2 full days simply trying to get the cellular data network settings to appear and I am now at the point of pulling hair and/or smashing things.  Why is it so difficult to simply update the cellular data network APN settings on a standard Iphone 3 ATT with a unlimited Straight Talk plan?  Everyone knows that Straight Talk's $45 a month unlimited data/calling plan is supposed to be 100% compatible with AT&T carried Iphones.  Will someone please tell me HOW TO UPDATE THE APN SETTINGS ON THIS IPHONE 3.  Thanks and God bless
    <Personal Information Edited by Host>

    StraightTalk is not a supported carrier.
    Contact them for support.
    FYI, unless the device is officially unlocked from AT&T, you will not be able to use it on another carrier.

  • Iphone config utility version

    i'm using mac 10.5.8
    so i can't use iphone config utility ver 3.X, but only 2.x
    however, i can't add the ipa to iphone with that
    iphone verison is ios 5.0.1
    so
    Q1: which is the latest version of iphone config of 2.x ? ( mine is 2.1 )
    Q2: where can i download it?
    Q3: i can't add in ipa, is that due to iphone config utility 2.x ?

    Q1. 2.2 (but listed minimum requirement is OS X 10.6.)
    Q2.  iPhone Configuration Utility 2.2 for Mac OS X
    Q3. Yes
    http://help.apple.com/iosdeployment-ipcu/?lang=en

  • Trying to confiq cisco bridge WET200. connected to macbook ethernet port. entered 192.168.1.226 for config util. Times out.

    I am trying to configure (due to WEP code on my wireless network) Cisco bridge WET200 for use in my home theater. To configure, I connected to ethernet port of macbook OS 10.6.8. Entered IP address 192.168.1.226 for config utility but it times out. Cisco says I need either IE or firefox. Downloaded firefox but still fails. Has anyone had experience with this?

    Found that if I clean up DNS for my domain with PTR and A then everything started working properly after a rebuild.

  • New cmedia audio config utility to d/l

    hi all,
    i just wanted to say happy holidays and  tell you that cmedia, makers of our 865 PE onboard sound chip's codec  (cmi 9739a) have released an update to their  audio config utility  new version is  5.12.01.00039.3 (36)
    http://www.cmedia.com.tw/e_download_01.htm
    heres a look at one tab of the updated gui
    http://server5.uploadit.org/files2/201203-cmedia.JPG
    also d/l the new cat drivers  3.10  and mmc 8.8  for ati v/c owners only if you have not already
    cheers

    I followed this link and found a feature that might be great.
    You can get real 3d sound from 2 speakers and earphones. For that set your outputs to 4 channel mode and plug the earphones in the line in jack of the motherboard. Enable the 5.1 virtual speaker and set the Ls and Rs (which are you earphone's speakers) a little louder than your front speakers.
    The msi official drivers mentions it in the splash screen of their install, and in the 3d demo program when set to 4 speakers.
    It is called Xear3d earphone plus, a feature of the c-media 9738/9739A chip.
    http://www.cmedia.com.tw/product/CMI9739.htm
    You can find full description here. It seems to be powered by a Sensaura or HRTF technology.
    http://www.cmedia.com.tw/doc/Xear%203D.pdf
    And more explaination about hrtf there, below page 25.
    http://www.cmedia.com.tw/doc/CMI8738_4ch_spec.pdf
    When using the new driver, if you uninstall the previous driver, let the Play3d demo from msi, because it is not shipped with the one from c-media.

  • New version of iPhone Config Utility?

    Does anyone know if/when a new iPhone Config Utility will be released?

    I believe that IPCU 3.4 was just released--I think on Oct 12
    Here's the link:
    For Mac - http://support.apple.com/kb/DL1465
    For PC - http://support.apple.com/kb/DL1466

  • DAQCard-AI-16E-4 Config Utility vs VB command set.

    The National Instruments Config Utility allows me to select the mode of the
    card for analog input. I can choose differential, single-ended referenced
    or single-ended non-referenced. Can I set these parameters using VB
    commands or does the user need to make sure the configuration is correct in
    the Config Utility manually?

    Hi Don,
    Couple of quick questions first
    What sort of frequency do you want your loop to run at?
    How quickly after the trigger pulse do you want to read the outputs, are the outputs transients or steady state readings?
    Do you want to do this using the NI-DAQ API or the NI ComponentWorks ActiveX controls?
    Paul

Maybe you are looking for

  • External Drive Delima

    I recently got a laptop that I will probably be using for video editing while I am in college. The main issue I am running into though is the lack of storage space, so I am planning to get an external drive to store everything on, and just the essent

  • Creating a PDF from a plugin

    I'm developing a plugin for the Mac which will need to create a PDF of the image. The PDF generation methods in Cocoa require an NSView to operate against. My question is how do I dynamically create a view using the image data passed to the plugin? O

  • File association in xfce4

    I am wondering how file association works in xfce4. Examples: After emacs was installed, xfce4 wanted to open all kinds of files in a new instance of emacs. An .scm scheme source code file was opened in StarCraft Map Editor An .xml file was opened in

  • NullPointerException in open card framework

    when I want to read a cref file from a open card framework file the next error appear: Exception occurred during event dispatching:java.lang.NullPointerException. what is happening ?..help me please.

  • Installing SAP IDES ECC6.0

    Hi experts, i m using a Windows Server 2003 Enterprise Edition R2 32 bits and SQL Server 2005 DVD delivered by SAP system ID : BAS system number : 00 message server : SAPECCTEST I wish to install a SAP IDES with the IDES Installation Master and while