7920 upgrade to 3.01 - Provision Error

Recently upgraded 7920 phones from 2.01 to 3.01 code. Startup is okay, but the phone displays a brief message saying "Provision Failure" at the end of the bootup process. Performance does not appear to be affected, at least the users haven't reported any problems yet. Does anyone know what this means?

I updated the latest English locale files for CME 4.0(2) and I am still seeing the provisioning failed error. I am using a 3845 with 12.4(11)t. Here are the commands I used.
tftp-server flash:mk-sccp.jar
tftp-server flash:td-sccp.jar
tftp-server flash:tc-sccp.jar
tftp-server flash:g3-tones.xml
tftp-server flash:7920-dictionary.xml
telephony-se
create cnf
ephone 1
reset
Thanks,

Similar Messages

OS Provisioning Error

When attempting to provision a Solaris ALOM target, the install:provision_start plan fails. I am running SPS 6.0.2 masterserver and the remote agent has been upgraded/prepared. The OSP plugin is from ga2 release.
I modified the n1osp_deploy_sps_wrapper.sh to include print out ksh -x debugging. It appears as though it is not writing the pid file and directory in /var/opt/n1sps.
Is there something I am missing?
Here are the error logs:
Plan Failure
Error:The plan (or preflight) "/system/autogen/Solaris10_807_sparc.standard-inst-provision_start-1209588353540" finished with 1 failed host(s). (017034)
The execNative step failed because the exit status "2" of the command did not match "0" for the command
"/opt/SUNWn1sps/N1_Service_Provisioning_System/agent/data/systemcomps/com.sun.n1osp/n1osp_util/n1osp_deploy_sps_wrapper.sh
/opt/SUNWn1osp/sbin/n1osp_deploy /opt/SUNWn1osp/hosts/v240_p1 /opt/SUNWn1osp/profiles/Solaris10_807_sparc.standard/x4100_p1-jet.v240_p1
/opt/SUNWn1osp/subnets /var/run/n1osp log/v240_p1-provision.log console/v240_p1-provision.console pid/v240_p1-provision.pid true". (017068)STDOUT:
Executing command /opt/SUNWn1sps/N1_Service_Provisioning_System/agent/data/systemcomps/com.sun.n1osp/n1osp_util/n1osp_deploy_sps_wrapper.sh /opt/SUNWn1osp/sbin/n1osp_deploy /opt/SUNWn1osp/hosts/v240_p1 /opt/SUNWn1osp/profiles/Solaris10_807_sparc.standard/x4100_p1-jet.v240_p1 /opt/SUNWn1osp/subnets /var/run/n1osp log/v240_p1-provision.log console/v240_p1-provision.console pid/v240_p1-provision.pid true
Making copies of files in /var/run/n1osp/5240
Clearing stale log and console files (if any)
Executing command in foreground /opt/SUNWn1osp/sbin/n1osp_deploy -v -f /var/run/n1osp/5240 < /dev/null 2>&1
Usage: n1osp_deploy -h <hostfile1:hostfile2:...> -o <osprofilefile> -s <subnetdir> [-v]
or n1osp_deploy -f <provisioning files> [-v]
or n1osp_deploy -H
-h {h}ost description in xml
-o {o}s profile description in xml
-s directory containing {s}ubnet description(s) in xml
-f provisioning {f}iles (directory path)
-v {v}erbose console output
-H {H}elp and displays usage
By default, n1osp_deploy shall delete the files being passed as input if the verbose option is not specified and the operation is successfully completed.STDERR:
/bin/pwd
2> /dev/null
PWD=/opt/SUNWn1sps/N1_Service_Provisioning_System/agent/work
+ echo Executing command /opt/SUNWn1sps/N1_Service_Provisioning_System/agent/data/systemcomps/com.sun.n1osp/n1osp_util/n1osp_deploy_sps_wrapper.sh /opt/SUNWn1osp/sbin/n1osp_deploy /opt/SUNWn1osp/hosts/v240_p1 /opt/SUNWn1osp/profiles/Solaris10_807_sparc.standard/x4100_p1-jet.v240_p1 /opt/SUNWn1osp/subnets /var/run/n1osp log/v240_p1-provision.log console/v240_p1-provision.console pid/v240_p1-provision.pid true
+ [ 9 -ne 8 -a 9 -ne 9 ]
+ umask 022
+ CP_CMD=cp
+ BASENAME_CMD=basename
+ DIRNAME_CMD=dirname
+ MKDIR_CMD=mkdir
+ RM_CMD=rm
+ TOUCH_CMD=touch
+ SORT_CMD=sort
+ GREP_CMD=grep
+ TR=env LC_ALL=C LANG=C /usr/bin/tr
+ N1OSP_DEPLOY_JAVA_CMD=com.sun.n1.isp.osservice.provision.PluginProxy
+ [ = SunOS ]
+ PS_UCB_CMD=ps
+ N1OSP_DEPLOY_CMD=/opt/SUNWn1osp/sbin/n1osp_deploy
+ HOST_XML=/opt/SUNWn1osp/hosts/v240_p1
+ PROFILE_XML=/opt/SUNWn1osp/profiles/Solaris10_807_sparc.standard/x4100_p1-jet.v240_p1
+ SUBNET_DIRECTORY=/opt/SUNWn1osp/subnets
+ DEPLOY_DIRECTORY=/var/run/n1osp
+ TMP_DIR=/var/run/n1osp/5240
+ LOG_FILE=/var/run/n1osp/log/v240_p1-provision.log
+ CONSOLE_FILE=/var/run/n1osp/console/v240_p1-provision.console
+ PID_FILE=/var/run/n1osp/pid/v240_p1-provision.pid
+ FOREGROUND_FLAG=FALSE
+ [ 9 -eq 9 ]
+ FOREGROUND_FLAG=true
+ + env LC_ALL=C LANG=C /usr/bin/tr [:lower:] [:upper:]
+ echo true
FOREGROUND_FLAG=TRUE
+ TMP_PID_FILE=/var/run/n1osp/5240/pid
+ trap terminate 15
+ sort -u /var/run/n1osp/pid/v240_p1-provision.pid
sort: can't stat /var/run/n1osp/pid/v240_p1-provision.pid: No such file or directory
+ + basename /opt/SUNWn1osp/hosts/v240_p1
NEW_HOST_XML_FILE=/var/run/n1osp/5240/v240_p1
+ + basename /opt/SUNWn1osp/profiles/Solaris10_807_sparc.standard/x4100_p1-jet.v240_p1
NEW_PROFILE_XML_FILE=/var/run/n1osp/5240/x4100_p1-jet.v240_p1
+ rm -f /var/run/n1osp/5240/*
+ mkdir -p /var/run/n1osp/5240
+ dirname /var/run/n1osp/log/v240_p1-provision.log
+ mkdir -p /var/run/n1osp/log
+ dirname /var/run/n1osp/console/v240_p1-provision.console
+ mkdir -p /var/run/n1osp/console
+ dirname /var/run/n1osp/pid/v240_p1-provision.pid
+ mkdir -p /var/run/n1osp/pid
+ echo Making copies of files in /var/run/n1osp/5240
+ cp /opt/SUNWn1osp/hosts/v240_p1 /var/run/n1osp/5240/v240_p1
+ cp /opt/SUNWn1osp/profiles/Solaris10_807_sparc.standard/x4100_p1-jet.v240_p1 /var/run/n1osp/5240/x4100_p1-jet.v240_p1
+ cp -f /opt/SUNWn1osp/subnets/192.168.1.0 /var/run/n1osp/5240
+ echo Clearing stale log and console files (if any)
+ rm -f /var/run/n1osp/log/v240_p1-provision.log
+ rm -f /var/run/n1osp/console/v240_p1-provision.console
+ rm -f /var/run/n1osp/pid/v240_p1-provision.pid
+ touch /var/run/n1osp/console/v240_p1-provision.console
+ touch /var/run/n1osp/pid/v240_p1-provision.pid
+ [ TRUE == TRUE ]
+ echo Executing command in foreground /opt/SUNWn1osp/sbin/n1osp_deploy -v -f /var/run/n1osp/5240 < /dev/null 2>&1
+ CPID=5263
+ echo 5263
+ 1> /var/run/n1osp/5240/pid
+ wait 5263
+ /opt/SUNWn1osp/sbin/n1osp_deploy -v -f /var/run/n1osp/5240
+ 0< /dev/null 2>& 1
+ status=2
+ rm -f /var/run/n1osp/pid/v240_p1-provision.pid
+ exit 2

I had a similar issue... and the problem was in the subnet component. The gateway field for the variable set was empty (my provision network didn't have a gateway), the net component creation didn't complain about the empty field and later I got the provisioning error.
As I didn't want to specify a gateway which didn't exist, I ended specifying the same IP as the host in the variable set. It worked just fine.
Edited by: gersius2 on Mar 4, 2009 9:59 AM

IPod touch is not recognized by Windows (with a connect to iTune screen) after OS 5.1.1 upgrade and received an 1602 error

My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.

Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602

CUP Provisions user to SAP successfully but gives "Auto-Provisioning" error

Hi All,
I'm getting an "auto-provisioning" error in CUP when a "Change Account" workflow is approved. The strange thing is, CUP does successfully provision the change to the SAP backend. Yet, the "New Account" provisions successfully without the error.
Here is an example of the audit trail log from Change Account:
Request submitted for approval by Dylan Hack(HACKDY) on 06/28/2010 17:14
Approved By Dylan Hack(HACKDY) Path AE_AUTO_APPROV_ERROR and Stage AE_AUTOPROV_ERR on 06/28/2010 17:14
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
   Approved FI_xxxxx-DEV role for Add action with validity dates 06/28/2010-12/31/9999
Auto provisioned for request on 06/28/2010 17:14
   User Provisioning failed for System(s) : DEV. Error Message :
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
   Role: FI_xxxxx assigned to user: testngin in System(s): DEV.
Request submitted for reroute by system on 06/28/2010 17:14 due to auto provisioning failure
   Rerouted in the Path : AE_AUTO_APPROV_ERROR and Stage : AE_AUTOPROV_ERR to Path : AE_AUTO_APPROV_ERROR and Stage : AE_AUTOPROV_ERR
Note: the role names were replaced with "xxxxxxx."
The system log gives an error, but it is very vague:
2010-06-28 17:14:34,682 [SAPEngine_Application_Thread[impl:3]_33] ERROR com.virsa.ae.service.ServiceException
com.virsa.ae.service.ServiceException
     at com.virsa.ae.service.sap.SAPProvisionDAO.intializeWithChangeUserInputParameters(SAPProvisionDAO.java:762)
     at com.virsa.ae.service.sap.SAPProvisionDAO.changeUser(SAPProvisionDAO.java:3457)
     at com.virsa.ae.service.sap.SAPProvisionDAO.changeUser(SAPProvisionDAO.java:3419)
Any ideas or suggestions?
Current software level AC5.3 SP12.
-Dylan

Hello Varun,
Thanks for the thought on this. We don't use User Defaults for Change Account, but do for New Account. You question prompted me to do more testing with very interesting results.
Results
New Account with User Defaults configured:
User provisioned successfully, no Auto-Provision error, Defaults NOT provisioned.
New Account without User Defaults configured:
User provisioned successfully, no Auto-Provision error.
Change Account with User Defaults configured:
User provisioned successfully, no Auto-Provision error, Defaults NOT provisioned.
Change Account without User Defaults configured:
User provisioned successfully, Auto-Provision ERROR, Defaults NOT provisioned.
In both New and Change Account, the configured User Defaults are NOT provisioned even though the user is provisioned. AC5.3 is on SP12, the RTA is VIRSANH SP12 and VIRSAHR SP10.
For the Change Account, the user is always provisioned regardless of User Defaults; however, when no User Default is configured, the Auto-Provisioning error occurs. The User Defaults NOT provisioning is a real problem, the CUP error message, I can work around for now.
What about on your side? Am I the only guy using SP12 here?

ECC 6 SR3 upgrade I am getting following error at RSVBCHCK

2EETQ241 Errors found in logfiles - accumulated in file "PSVBCHCK.ELG"
1EETQ203 Upgrade phase "JOB_RSVBCHCK_D" aborted with errors
1 ETH010XRSVBCHCK: Check of open update requests
2EETG050 Update records still exist - Please process.
There is no SM13 nor SMQ1 entries in the system, also reorganiezed update records, also checked following.
SQL> select * from sapr3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBMOD;
no rows selected
SQL> select * from SAPR3.VBHDR;
no rows selected
SQL>
Incase anyone had faced similar issues, and found a workarond please let me know
thanks.

Hi Mathew,
Please check if your system has the ABAP program "RMCEXCHK" as per OSS Note no. 1083709.
Once you run this program, it exactly would let you know what are the areas which are causing the issues. Based on that you can empty out the LIS Set up tables.
Also, can you please check the update program for LIS has emptied out the entries in SMQ1.
Regards,
Anil

Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16

Hello,
I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
upgrade steps run to completion.
Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
the issue here. Any ideas?
I've found also here
http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
suggestions for similar issue with SQL Server 2008 which that I should do:
Via ssms:
From msdb:
Delete:
dc_admin role
Dc_operator role
Dc_proxy role
UlitityCMRReader role
UtilityIMRReader role
UtilityIMRWriter role
but for not I didn't tried it yet. This is standalone SQL Server instance.
Any help really appreciated.
Regards

Script returns the same error.
System databases:
1   1   760   -1   10   1048578   0   1   master       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
2   0   12768   -1   10   1048642   0   1   mastlog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
1   1   1024   -1   10   1048578   0   2   tempdev       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
2   0   64   -1   10   1048642   0   2   templog       C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
1   1   288   -1   128   2   0   3   modeldev   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
2   0   4464   -1   10   1048642   0   3   modellog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
1   1   28936   -1   10   1048578   0   4   MSDBData   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
2   0   3352   268435456   10   1048642   0   4   MSDBLog   C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
are all in place where path shows.
Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
       SELECT physical_name
       FROM master.sys.master_files
       WHERE (name = N'master')
it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue.

Following the recent iTunes upgrade I am getting two error messages (-42404) and (-50). Any ideas how to rectify?

Using iTunes for the first time since the upgrade I am plagued with error messages - one telling me that a required component is not installed (-42404) and a second that my iTunes store request cannot be completed (-50). I've reset my old iPod as the message tells me but am reluctant to do that on my iPhone and risk loosing content. I've uninstalled and reinstalled iTunes but it's made no difference. Any ideas how to fix please?

Disable your firewall/security software.

ISA550 After upgrade 1.2.17 many error messages in the log

Hi,
After upgrade> 1.2.17 many error messages in the log
Hello,
after upgrading from 1.2.15> 1.2.17 have infinitely many errors in the log:
Err - System: sdsd: msgq_open: Error: mq_open () failed on msg queue / sdsd, errno = 2
Err - System: sdsd: open_control_msgq: Failed to open sdsd control message queue, errno = 2 (No such file or directory)
These errors occur repeatedly (300 times per minute). So I went back to the FW 1.2.15.
Does anyone have an idea?
Thanks and regards
Claus

Hi John,
Has this issue been resolved yet ?
I'm facing the same issue after upgrading to 1.2.18
11/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
Please let me know how to make this go away.
What are these errors about anyway ?? What causing it ??
Thanks
Lutfi
2013-11-11 10:42:29
Error
System
sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
2013-11-10 12:42:59
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 12:42:59
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-10 12:42:58
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-10 00:22:57
Error
System
sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
2013-11-10 00:22:57
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
2013-11-10 00:22:56
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 110
2013-11-09 18:43:17
Error
System
sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
2013-11-09 18:43:16
Error
System
sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
2013-11-09 18:43:16
Error
System
sdsd: tcp_connect: Couldn't connect socket, errno = 11011/11/2013 10:42    Error    System    sdsd: msgq_send: name /sdsd: pid 27242: mq_timedsend failed, errno = 9
11/10/2013 12:42    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 12:42    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/10/2013 12:42    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/10/2013 0:22    Error    System    sdsd: http_get: Error: Failed to open connection to v1.sds.cisco.com
11/10/2013 0:22    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1AFC4DC0
11/10/2013 0:22    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 110
11/9/2013 18:43    Error    System    sdsd: http_post: Error: Failed to open connection to v1.sds.cisco.com
11/9/2013 18:43    Error    System    sdsd: open_connection: TCP connection failed on connection 0x1B1C60F8
11/9/2013 18:43    Error    System    sdsd: tcp_connect: Couldn't connect socket, errno = 1

When upgrading quicktime, I get an error code: -3, and itunes will not run.

when upgrading quicktime, I get an error code: -3, and itunes will not run. How do I fix?

i 'm very interest because on 3 PC , i have the same problem and i work at tv producer...

CiscoWorks won't start after LMS upgrade 3.0 - 3.2 ERROR 502 Bad Gateway in Portal

I upgraded CiscoWorks LMS from 3.0 to 3.2 today. Everything worked prior to the upgrade.
The upgrade was successful, with no errors, and all services started.
Can anyone help, and check everything and I see no problem. The system creates the file MDCSupportInformation.zip me clean without any content.
I add the installation log file;
And tell them that after upgrading to 3.2, you carge the following patches:
LMS321-win-CSCtr77570-0.zip,
cm5.2.1-nt-CSCtw88763-1.0.zip,
lms3.2.1-win-CSCts95764-0.zip,
lms3.2.1-win-CSCts82530-0.zip
in that order.
He added the logs generated by the LMS services Tomcat and Apache

Hi,
Here are the various errors/warning I found while looking through the attached logs.
WARNING:The application that you are installing requires new tasks to be
WARNING:registered with ACS. If you have already registered this application
WARNING:with ACS from another server, you do not need to register it again.
WARNING:However if you re-register the application, you will lose any custom
WARNING:roles that you had created earlier for this application in ACS.
WARNING:Some features in ACS may not work correctly on Dual-stack servers.
Warning: System memory is less than the minimum requirement.This may affect performance.
Warning: Current swap space is less than the minimum requirement. This may affect performance.
WARNING: The available RAM is 4086 MB which is lesser than the required RAM of 4096 MB. User chose to continue the installation
WARNING: Domain Name is not found from TcpIp parameters, setting PX_FQDN same as PX_HOST
INFO: User Selected to Reboot the Machine
Installation Completed at 16:38:06
Nov 23, 2012 7:59:11 PM org.apache.tomcat.util.threads.ThreadPool$ControlRunnable run
SEVERE: Caught exception (java.lang.NoClassDefFoundError) executing org.apache.jk.common.ChannelSocket$SocketConnection@d888c7, terminating thread
[warn] RSA server certificate CommonName (CN) `LOND-CW-MDF-1' does NOT match server name!?
[Fri Nov 23 19:19:46 CST 2012] CMFX - fileLoc is \C:\PROGRA~1\CSCOpx\lib\classpath\md.properties
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort
[ Fri Nov 23 19:22:22 CST 2012 ] TomcatMonitor After gettingAJPPort : ajpPort = 9009 and host =LOND-CW-MDF-1
Cookie value is invalid
LTGateway.run(): connection to LWMS failed, trying again, Nov 23 19:22:28
You have a BUNCH of the ChannelSocket$SocketConnection exceptions.
The next step for you:
Check the running processes via cmd line (pdshow -brief).
Check that all processes are running as expected. If they are then take a look at what is keeping ports open on your box (netstat -anob). From above, the reason may be an application occupying a port LMS needs. Also check the Windows error logs.
Check the following services, they should look like:
Ciscoworks ANI database engine :Manual
CiscoWorks Daemon Manager :Auto
CiscoWorks RME NG database :Manual
CiscoWorks Tomcat Servlet engine : Manual
CW VisiBroker Smart Agent :Manual
CiscoWorks Web Server :Manual
CWCS Cmf database engine :Manual
CWCS rsh/rcp service :Auto
CWCS syslog service :Auto
CWCS tftp service :Auto
DFM dfmEpm :Manual
DFM dfmFh :Manual
DFM dfmInv :Manual
4. Log in as the local Administrator (not Domain).
Stop daemons (net stop crmdmgtd)
CSCOpxMDC\Apache\perl ConfigSSL.pl -disable
CSCOpx\MDC\Apache\perl ConfigSSL.pl -enable (Answer when prompted)
navigate to ..\NMSROOT\setup\support
Execute resetCasuser.exe
Start Daemons (net start crmdmgtd) and wait 20 minutes.
Check if condition persists.
5. Check the output of ..\NMSROOT\MDC\Apache\bin>pdreg -l Apache
A couple other things:
Set the server name to be the server name with the domain as well.
Set the primary DNS suffix to match
Modify md.properties & Registry & set PX_FQDN to the above.
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet
- HKEY_LOCAL_MACHINE\SOFTWARE\Cisco\ResourceManager\CurrentVersion\Environment
Thanks.

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!?

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to

Our computers were upgraded from Windows XP to Windows 7. When we try to access CS5 we get an error. We originally had CS3 and upgraded to CS5 now the error message wants us to choose a qualifying product which seems to be CS4 however we went from CS3 to CS5. Can anyone assist

Contact serial number support by web chat.
Mylenium

Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so? Help?

Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so? Help?

There is a chance the spreadsheets were made with a Numbers or AppleWorks version so old that it's not compatible anymore with the latest Numbers version (yes this can happen)

Upgrade phase "SQLSCREXE_ALI_ORG" aborted with errors

Hi ,
Need some assistance. Logged message with SAP AG, still waiting for response.Anyone that can assist will be appreciated. Error from logs.
/usr/sap/put/log# more SEDCORG.LOG
1 ETQ201XEntering upgrade-phase "SQLSCREXE_ALI_ORG" ("20061108125644")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPR3
4 ETQ399   auth_shadow_upgrade=1
4 ETQ380 computing toolpath for request "TP_EXECDBSCRIPT_NEW"
4 ETQ381 request "TP_EXECDBSCRIPT_NEW" means "execdbscript with 46A feature"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ276 Executing SQL-script "ALORDC.XQL"
4 ETQ399 ext. env.: DIR_LIBRARY=/usr/sap/put/exe
4 ETQ399 ext. env.: LIBPATH=/usr/sap/put/exe:/usr/sap/BB1/sapjco:/usr/lib:/lib:/usr/sap/BB1/SYS/exe/run:/usr/java131
/jre/bin:/usr/java131/jre/bin/classic
4 ETQ399 2006/11/08 12:56:44: put_execute: (tp) forkpid:97258
2EETQ278 Errors during execution of SQL-script "ALORDC.XQL"
1EETQ203 Upgrade phase "SQLSCREXE_ALI_ORG" aborted with errors ("20061108125645")
Checked TPSQLSTD.OUT log
/usr/sap/put/log# more TPSQLSTD.OUT
BLOCKED SIGNALS: ''
SAPup> Starting subprocess 97258 at 20061108125644
ENV <0x2ff22d14>: dbms_type=ORA
ENV <0x2ff22d22>: dbs_ora_tnsname=BB1
ENV <0x2011c290>: dbs_ora_schema=SAPR3
ENV <0x2ff22d4b>: ORACLE_PSRV=BB1
ENV <0x2ff22d5b>: ORACLE_SID=BB1
ENV <0x2ff22d75>: ORACLE_HOME=/oracle/BB1/102_64
ENV <0x2ff22d94>: ORACLE_BASE=/oracle
ENV <0x2ff22da8>: ORA_NLS33=/oracle/client/92x_64/ocommon/nls/admin/data
ENV <0x2ff22ddf>: NLS_LANG=AMERICAN_AMERICA.US7ASCII
ENV <0x20147368>: DIR_LIBRARY=/usr/sap/put/exe
ENV <0x2014864c>: LIBPATH=/usr/sap/put/exe:/usr/sap/BB1/sapjco:/usr/lib:/lib:/usr/sap/BB1/SYS/exe/run:/usr/java131/j
re/bin:/usr/java131/jre/bin/classic
ENV <0x2011be90>: auth_shadow_upgrade=1
EXECUTING /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/EXDBNEW.TPP execdbscript BB1 -x ALORDC.XQL
This is /usr/sap/put/exe/tp version 370.00.09 (release 700)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBCONFPATH is no longer used.
2EETP000 sap_dext called with msgnr "2":
2EETP000 -
db call info -
2EETP000 function:   db_ntab
2EETP000 fcode:      NT_RDTDESCR
2EETP000 tabname:    TADIR
2EETP000 len:        5
2EETP000 key:        TADIR
2EETP000 retcode:    2
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 97258
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0200
tp finished with return code: 200
meaning:
ERROR: see tp's stdout (Standard Out may not be available)
Process with ID 97258 terminated with status 200
History : Original problem was related to environment variables for DIR_LIBRARY. Resolved that issue; UaGui was started as root and not the <sid>adm user. UaServer was started as correct user. Killed session and logged on as <sid>adm restarted UaGui as the correct user. Now this error comes up, SAPup won't allow me continue or retry
Replaced tp, r3trans and SAPup tools. Also when I run the cmd /usr/sap/put/exe/tp (tp) pf=/usr/sap/put/bin/EXDBNEW.TPP execdbscript BB1 -x ALORDC.XQL in a seperate session, it completes successfully and creates the necessary views as described in ALORDC.XQL. I checked the ALORDC.LOG to confirm this.
Kind Regards,
Ricky Padayachee

Hi John,
The problem I had was wrong environment when starting the Uagui and Uaserver, must be started as adm user. I also restarted the installation from scratch...
I had an issue with a duplicate database object, SVERS in my case. I dropped the object not required and restarted phase, went through fine.
Let me know, how it goes.
Regards,
Ricky

"0xE800003A" & provisioning errors when trying to build and deploy!

I've seen a few posts about this but none of the suggested solutions seem to work.
My problems are as follows:
1) "CodeSign error: no provisioning profile found with UUID '[code]'"
2) "Your mobile device has encountered an unexpected error (0xE800003A) during the install phase: Verifying application"
The provisioning error is really getting to me. I have found some fixes that describe modifying the project file and have done so. Once the file has been modified I can get the build and go to work with the simulator but as soon as I attempt to deploy to an actual iphone both will stop working. The iphone gets the 2nd error, which I've tried to fix by changing the info.plist file to modify the bundle id to just the address but it doesnt help.
This is the only wall I can see thats blocking me from uploading to the appstore.
Any help is greatly appreciated. Thanks in advance.

You might want to look at my blog post at http://tinyurl.com/codesign .
Apart from that it might help if you could elaborate a bit more about the specific error you're experiencing. In my experience EVERY codesign problem is an issue of mis-configuration / restarting Xcode and can ultimately be resolved.

7920 upgrade to 3.01 - Provision Error

Similar Messages

Maybe you are looking for