7921 and 7925 ip phones

hi, are 7921 and 7925 ip phones supported for turkish menu?

Hi Emre,
It doesn't look like it
Turkish Language Support
Cisco Unified Communications Manager Release 6.1 supports Turkish locales on Cisco Unified
Communications Manager user interfaces and Turkish text on phone screen displays for the following
Cisco Unified IP phones.
Supported Cisco Unified IP Phones (SCCP and SIP)
7975G, 7971G-GE, 7970G, 7965G, 7962G, 7961G-GE, 7961G, 7945G, 7942G, 7941G-GE, 7941G,
7931G (SCCP only)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_1/cucm-rel_note-611b.pdf
Hope this helps!
Rob

Similar Messages

Voice over Wireless with Cisco phones 7921 and 7925

Hello experts,
I made an wireless audit for a company.
They have 2 WLCs 5508 in HA mode, with APs 2602 for indoor and 1552. Version of the WLC : 7.6.120.0
At the end of the day we noticed that the roaming between indoor and outdoor access points is sometimes failing and results to a complete disconnection of the wireless phone (7921 or 7925) from the network. When people go from the indoor to the outdoor area, there is no problem. The problem comes when people are coming from the outdoor to the indoor.
Also, on the WLC, the power lvl of the outdoor APs are set to 1 ... Is it good or not ?
My question is, is there any known issue about Voice over wireless with WLC 5508-7.6.120.0 with APs 2602 and 1552 ?
Maybe it should be better to upgrade to 7.6.130.0 ?
Thanks in advance,
Alexis

Normally yes.
Is there a way to troubleshoot what's going on with the phones ? Maybe a "show client detail MAC address* on the WLC ?
Here are some logs when the phones are losing the network :
*Dot1x_NW_MsgTask_4: Apr 09 12:44:21.320: #DOT1X-3-INVALID_WPA_KEY_MSG_STATE: 1x_eapkey.c:957 Received invalid EAPOL-key M2 msg in START state - invalid secure bit; KeyLen 40, Key type 1, client 00:24:d7:83:56:dc
*apfMsConnTask_6: Apr 09 12:28:32.668: #APF-3-VALIDATE_CCKM_REASS_REQ_ELEMENT: apf_utils.c:2506 Could not validate the CCKM Reassociation request element.Received Timestamp deviation > 1sec in CCKM Info Element from mobile. Mobile:4c:00:82:85:6e:e1, AP:1
*Dot1x_NW_MsgTask_1: Apr 09 12:26:53.964: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 74:26:ac:63:8c:a9 - got 00 00 00 00 00 00 00 03, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_1: Apr 09 12:26:53.929: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 74:26:ac:63:8c:a9 - got 00 00 00 00 00 00 00 02, expected 00 00 00 00 00 00 00 04
*apfMsConnTask_4: Apr 09 12:24:34.959: #APF-3-VALIDATE_CCKM_REASS_REQ_ELEMENT: apf_utils.c:2506 Could not validate the CCKM Reassociation request element.Received Timestamp deviation > 1sec in CCKM Info Element from mobile. Mobile:78:da:6e:f6:5f:89, AP:5
*Dot1x_NW_MsgTask_0: Apr 09 12:22:30.217: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 4c:00:82:85:1d:68 - got 00 00 00 00 00 00 00 03, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_4: Apr 09 12:22:30.206: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 4c:00:82:85:b3:ac - got 00 00 00 00 00 00 00 03, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_4: Apr 09 12:22:30.186: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 4c:00:82:85:b3:ac - got 00 00 00 00 00 00 00 02, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_0: Apr 09 12:22:30.167: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 4c:00:82:85:1d:68 - got 00 00 00 00 00 00 00 02, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_6: Apr 09 12:22:29.672: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 78:da:6e:f6:14:2e - got 00 00 00 00 00 00 00 03, expected 00 00 00 00 00 00 00 04
*Dot1x_NW_MsgTask_6: Apr 09 12:22:29.638: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 78:da:6e:f6:14:2e - got 00 00 00 00 00 00 00 02, expected 00 00 00 00 00 00 00 04
*apfMsConnTask_3: Apr 09 12:19:22.098: #APF-3-VALIDATE_CCKM_REASS_REQ_ELEMENT: apf_utils.c:2506 Could not validate the CCKM Reassociation request element.Received Timestamp deviation > 1sec in CCKM Info Element from mobile. Mobile:4c:00:82:85:6e:e1, AP:5
*osapiBsnTimer: Apr 09 12:13:36.031: #LOG-3-Q_IND: spam_lrad.c:53542 The system is unable to find WLAN 2 to be deleted

7921 and 12.3(7)JA

Hi guys,
in your opinion what should happen if i use 7921 and AP with 12.3(7)JA.
(i.e they register but don't work fine or they don't register at all)
thx.......

Per the 7921G Design Guide, only 12.3(8)JEA and later is supported. 12.3(8) supports U-APSD, which is a power save method used by the 7921. We recommend to use 12.3(8)JEA2 for AP1200 series and 12.3(4g)JA1 for AP1130 and AP1240 series. Also some improvements in that version to handle many power save enabled wlan phones.
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0/english/install/guide/7921dply.pdf

Cisco 7925 Wireless Phone Wireless Auto Config

Hello all,
My rehabilitation hospital is located right next to a large hospital connected by a catwalk. We have had 3 incidents where our RTs have gone over to the hospital next door for patient MRIs and our Cisco 7925 wireless phones are being configured with that hospitals wireless profile. The RTs are saying that no one from that hospital are manually configuring the phones to be on their wireless network so they can be used while off our wireless network. We're thinking that the RTs are putting their phones down and picking up the other hospitals 7925s by accident before leaving. My question to you is...Does the Cisco 7925s have an auto configuration tool that will automatically pick up on a particular wireless network and automatically configure itself and register with a Call Manager? Thanks!
Regards,
Terence

Leo and George,
Exactly! It makes absolutely no sense. All our Cisco 7925 phones are manually configured for our voice VLAN for our wireless network infrastructure. It's the only profile I've configured for those phones. I spoke to the other hospitals IT personnel and was advised that they use a wavelink server that sends the configuration to their 7925s after they have been entered into the server. The only explanation I can come up with is that our RTs are sitting our phones down, doing whatever they need to do over at the hospital, then picking up the hospitals 7925 thinking they're picking up ours. Another thing to note is that when I reconfigured the phone to be put back on our wireless, the phone performed a firmware update and then registered to our Call Manager.

I was syncing my iPhone5 to iTunes and then my phone automatically locked and now it won't turn back on

I was syncing my phone to itunes and then my phone automatically locked and now it won't turn back on but when i plug it into a charger it makes the charging sound.

Hi lemmag17,
If your iPhone doesn't appear to be responding or turning on, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. What's wrong and how do I fix it? Help!

Installed the update tonight and now my phone (Lumia 928) won't power up. I've tried a soft reset, but the screen goes from the Nokia logo to a red Verizon screen to a black screen. Tried it 10 times with the same result. What's wrong and how do I fix it? Help!

Oh no Mr.Ected!
I can see if we can get your phone back on! I understand how important it is to have a phone. Have you tried this to see if we can get it back on? http://vz.to/1DZhteH . If it is still goes to a red Verizon screen and then to black we might need to do a master reset. While the phone is off try this:http://vz.to/1DZhXkU Be mindful this is the last resort because it will erase everything on the phone. If you have done back up assistant in the past you will be able to get you contacts back. Please let me know if you need any more help.
AmberF_VZW
Follow us on Twitter @VZWSupport

Battery Purging and Over heating Phone!

WHAT?!! I have assumed that my LG Revolution spontaneously purging the entire battery charge at once then over heating and shutting down was a hardware issue! Now I find that it is the result of yet ANOTHER OS SOFTWARE upgrade issue?! OMG are you kidding me?!! I have been PLAGUED with problems since I was forced to upgrade my android OS to 2.3.6 through Verizon! I am ready to make ANY change I have to escape this plague!! I PAY WAY TOO MUCH MONEY for android smart phones and premium service through a so called 'premium' provider to have to put up with economy freakin performance Verizon!!!
I am especially disappointed in Verizon since I took the phone all the way to their coorporate store 5 months ago and all they did was scratch their heads! They tried to sell me a new battery which also immediately commenced to over heat; so of course the next course of action was to try and sell me a NEW PHONE!
I've been sitting here with a DEAD VERIZON phone all day AGAIN trying to rescucitate it!! ****, that **!

Thank you Verizon; you're right. Buying a new phone is the fix! I bought a brand new LG Spectrum at the Verrizon store yesterday and my old LG Revolution immediately began to work perfectly again. That was the fix. Of course....
You think this is messed up? It just gets weirder. Before going to bed last night I took my new LG Spectrum off a 4 hour charge because it was full. It slept all night. When I checked it in the morning it had one missed call and 6 emails; that's it. The battery charge however was completely on EMPTY! OMG!!?? What the....? Yesterday I was rather puzzled by how exceptionally warm/hot it felt while on charge. The charger plug also felt the same. It's on charge right now using the supplied charger but I changed it to a different outlet. It's still very warm/hot. I'm befungled!! I live in a 1/2 million $ condo packed with properly working electronics' so it's certainly not a source problem.
More weirdness: yesterday I was downloading and re-installing programs and updates to reload my new phone. A couple of hours later it went on an all out download splurge all on it's own, one after another it was a stream of unwanted downloads I couldn't stop. I turned off wi-fi, but eventually had to shut down the phone right in the middle of processes..... not a good. (UPDATE: solved this issue. I discovered that all the bloatware pre-installed on the phone further imposes itself by ALSO being set to 'auto update' itself. Oh! cool! and check this out: it won't let you uninstall any of that sh*t! Cool huh? Thanks LG or is it Verizon; I want to be sure to give due credit to whomever is responsible for that *** idea!)
My new not-so smartphone phone, less than 24 hours old, is already fouled.
UPDATE: 5 hours later. No phone call usage today. Emails, texts, a few downloads, and some new phone setup configuring today. Phone is dead after 5 hours of use. Took old phone off 1 hour charge and of course it was as cool as a cucumber, plugged in new phone and it became hot within minutes. I think that the solution is to just go back to using landlines....
Attached below is a photo showing the EKG of the entire life of my NEW phone. 1 day and 7 hours. Hmph? And I am already in the forums. Anyone know what the record is?

My weather channel app doesn't work and freezes my phone

My weather channel app doesn't work and freezes my phone. I've tried closing the app. Also tried deleting and readding it. All my other apps work.

Try this:
Make sure your iPhone is fully updated.
Restart your iPhone
Do NOT open the app, just delete it
Reset your iPhone (hold down sleep/wake and home buttons simultaneously until you see an apple logo, then release the buttons)
Readd the app
Open the app and test.
If that doesn't resolve the issue, then it may be an issue with the app itself and you might have to contact the app's developer.

I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother was signed into it but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working

I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother is signed into it because I didn't have any credit to make an ID so he signed in so I could download apps but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working please help.

Apps are locked to the Apple ID that was used to download them. You will have to sign in as your brother in order to update it.

Updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reacticate it

updated my iphone 3gs to the 5 ios and now my phone wont read my sim card when i reactivate it.
Every time i connect it to itunes all it says is "There is no SIM card installed in the iphone you are attempting to activate." Even thought there is a sim card connected in my phone.

Is the SIM from a supported carrier?
Is the device carrier locked, officially unlocked, or hacked to be unlocked?
Has the SIM been reseated? If not, try that.
Also, basic troubleshooting is reset, restart, restore. Has any of that been tried?

I interrupted my iphone upgrade to ioS 6 and now my phone just keeps showing the apple. it wont restart or show up when I plug it into itunes!!!!

Help! i accidently interrupted my iphone upgrade to ioS 6 and now my phone wont turn on completely. it just keeps showing the apple. it also wont register with itunes...i have tried turning it off and restarting it multiple times but nothing is working. HELP!

hey man, i feel your pain... here's my story and i'm pretty sure this will work for you... on the 19th of september i went to upgrade ios 6 and paused it about 1/10 through... when i plugged my phone up at night the screen was at the normal lock screen.. when i woke up at 10:30 am i went to check my phone and the screen appeared as an apple logo with a progression bar about 6/10 full.. it didn't seem to be progressing any more, but i guess that was only because it was so slow trying to download over wifi because it had all night to finish downloading.. anyways i needed to check my texts and the time so i held down the lock button and the phone turned off during the download.. when i tried to turn it on the apple logo would appear like normal trying to boot up.. then it would fade away and cut off.. then seconds later try to turn on again, by itself, repeatedly for hours on september 20. i tried restarting it (holding lock and home button down 10-15 seconds) but the problem with that is that the phone was already trying to turn on itself so it never would restart correctly... (continued turning on and off by itself).. i went to verizon and they said my phone is screwed.. go to apple if you wanna pay.. i called apple support and a lady helped me out here's the solution that worked after hours of thinking my phone is totally screwed.. when the phone is dark and cut off.. press and hold the home button before you plugin your sync cable to your usb port.. (have itunes up and ready) continue holding the home button and plugin the sync cable.. still holding the button, wait for a message from itunes appear that says it recognizes your device in recovery mode.. press ok.. the screen on your iphone should be a snyc cable and and arrow pointing to an itunes symbol... from there it is pretty self explanatory.. you will need to restore and update your phone from there which should be an option after you press ok... it takes awhile.. your phone will then go through one, or maybe a few progression bars (it may vary, not sure).. while your itunes will be restoring software & firmware.. when everything is done on itunes and your phone.. your phone should boot right up!!! reply if you have any more questions.. i'm so glad i resolved my issue today.. good luck!

TS3694 I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I performed an iOS 7 software update on my iPhone yesterday, and now the phone is not working at all. The iPhone screen shows to connect to iTunes to restore. I've have done this, and still the iPhone is not working. What going on?

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

My i Phone drops WiFi connection after just a few minutes and wont reconnect unless I reset the network settings and reboot the phone?

My i Phone 4s has suddenly started to drop wifi connection after nealy months of near perfect connections?
To restore a wifi connection I have to reset the network settings and restart the phone, this only fixes the issues for around 2-3 mins?
Other quick fixes like switching wifi on and off/ switching to airoplane mode for a few secconds have no impact.
This is really annoying as I am using my data allowence very quickly, and as the phone is continually searching for a wifi connection the battery time has reduced dramatically.
I just wondered if any one else has the same issue, and any suggestions as to how I can fix this.
Thanks in Advance

Reboot.
Restore (from backup)
Restore (as new)
Test after each step. If one of them doesn't fix the problem, make an appointment at the genius bar.

I downloaded iOS 8.2 and now my phone won't connect to the iTunes store, and my iTunes Match is turned off and won't turn back on...

I downloaded iOS 8.2 on my iPhone 5s 32 GB and now my phone won't connect to the iTunes store, and my iTunes Match is turned off and won't turn back on... I'm trying to log in from Settings > iTunes & App Store... not working... I have reset the phone twice, tried via cell service, and rebooted my wireless router..

As per the Apple iCloud status page, they are having issues. Do not make changes at your end.
https://www.apple.com/support/systemstatus/
Edit

When I swipe phone to open, and hit the phone icon, then make a call, most times it says "calling mobile" but then nothing happens.

Same thing here. I'm getting very frustrated. When I swipe phone to open, and hit the phone icon, then make a call, most times it says "calling mobile" but then nothing happens. Then I try to end the call and hit the END button. Sure, it looks like the call disconnected, but as soon as I try to make another call, I see the same screen (the first called) and the words "calling mobile". The only way I can rememdy this, naturally, is powering off and restarting. But, c'mon...$300 for a phone that you have to power down between calls???
I've got the latest OS update, no jailbreak, or anything exotic on my 4s. What's more, when I try to make a call 2 out of 3 times, the dumb SIRI opens up and stops me from making the call. (and, yes, I have very carefully checked my process that I am not intentionally activating SIRI with my cheek.)
Again, $300 for all this in just trying to make a call?

reset your phonr by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

7921 and 7925 ip phones

Similar Messages

Maybe you are looking for