7921 not registering with CME through repeater

I have this environment:
CME 7.0 running in Cisco2851.
WLC2106 with 6 1242 APs
15 phones 7921
I have to extend the wireless coverage to an specific point (warehouse), 150 meters away. This point only have a PC and a phone, so I don't think a bridge is necessary. I have an 1131 AP configured as repeater. In my tests (locally) I see the 1131 is registering to the main wireless network. Using site survey feature in the 7921 I see the SSID broadcast from the repeater AP, but if I use Neighbor list feature the network is not allocated and obviously the phone can't register with CME. Only for tests I had disabled all security features for this SSID.
The 1131 association table only shows the root AP but it indicates the IP address assigned to the controller.
Can somebody give me some tips to identify what I'm missing?
Thanks in advance

I think H-REAP is a feature not usable for this case, isn't
I'm reading the "Cisco Wireless LAN Controller Configuration Guide", in page 7-19 and follow, Workgrouup Bridge is explained. I think it should be the solution for my requirements, although I will test tomorrow (Wendesday), I have some questions:
The example shows a hub in remote site, I guess it can be replaced with a switch without any problem.
Could it be possible to set another AP attached to the switch to get wireless access? Otherwise, I will need a desktop phone.
The manual indicates NO VLAN are supported (page 7-21), so this option will need PC and phone for this site running in the same VLAN?
I appreciate your assistance.
Daniel Escalante.

Similar Messages

  • Cisco IP Phone 7962 not registering with CME 9

    Dear Experts,
    I have CME router 2811 with 15 - 6921 phones and added 1 new Cisco 7962 phone. All the 6921 phones are registered and working fine.
    7962 phone does not register and the screen goes blank after the phone boot. Software version the phone is running is 9.3.1 SR2-1S
    Verified the CNF File is created
    tftp-server system:/its/vrf1/XMLDefault7962.cnf.xml alias SEP501CBFFC8735.cnf.xml
    Here is the configuration on the router.
    ip dhcp pool VOICE
       network 192.168.10.0 255.255.255.0
       default-router 192.168.10.1
       option 150 ip 192.168.10.1
    ephone-dn  11  octo-line
     number 2211
     label ABC 2221
     name ABC
    ephone  11
     device-security-mode none
     mac-address 501C.BFFC.8735
     type 7962
     button  1:11
    The results of the debug tftp events are as below -
    Oct 26 17:52:06.491: TFTP: Looking for CTLSEP501CBFFC8735.tlv
    Oct 26 17:52:06.595: TFTP: Looking for ITLSEP501CBFFC8735.tlv
    Oct 26 17:52:06.699: TFTP: Looking for ITLFile.tlv
    Oct 26 17:52:06.931: TFTP: Looking for SEP501CBFFC8735.cnf.xml
    Oct 26 17:52:07.487: TFTP: Opened system:/its/vrf1/XMLDefault7962.cnf.xml, fd 10, size 1278 for process 366
    Oct 26 17:52:07.495: TFTP: Finished system:/its/vrf1/XMLDefault7962.cnf.xml, time 00:00:00 for process 366
    Oct 26 17:52:09.799: TFTP: Looking for English_United_States/mk-sccp.jar
    Oct 26 17:52:10.119: TFTP: Looking for United_States/g3-tones.xml
    Oct 26 17:52:11.067: New Skinny socket accepted [2] from 0, sub 1 (15 active)
    Oct 26 17:52:11.067: sin_family 2, sin_port 49152, in_addr 192.168.110.30
    Oct 26 17:52:11.067: skinny_add_socket 2 192.168.110.30 49152
    Oct 26 17:52:11.799: Cannot find device entry on socket fd 7 for message 346
    Oct 26 17:52:11.799: Got wrong skinny message size 1836597052 on socket fd 7
    Oct 26 17:52:11.799: Got wrong skinny message size 824327534 on socket fd 7
    Oct 26 17:52:11.799: Got wrong skinny message size 1735289188 on socket fd 7
    Oct 26 17:52:11.799: Got wrong skinny message size 1007304255 on socket fd 7
    Oct 26 17:52:11.799: Got wrong skinny message size 1918987361 on socket fd 7
    Oct 26 17:52:11.799: Got wrong skinny message size 1632510061 on socket fd 7
    Oct 26 17:52:11.799: Got wrong skinny message size 1333032271 on socket fd 7 ... .so on
    Oct 26 17:52:11.815: Got wrong skinny message size 2622 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.815: Got wrong skinny message size 0 on socket fd 7.. so on
    Oct 26 17:52:11.883: Cannot find device entry on socket fd 7 for message 0
    Oct 26 17:52:11.883: Got wrong skinny message size -2056126442 on socket fd 7
    Oct 26 17:52:11.883: Got wrong skinny message size -54584240 on socket fd 7
    Oct 26 17:52:11.883: Got wrong skinny message size 3 on socket fd 7
    Oct 26 17:52:11.883: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.883: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:11.883: Got wrong skinny message size 825045805 on socket fd 7
    Oct 26 17:52:11.883: Got wrong skinny message size 0 on socket fd 7
    Oct 26 17:52:21.915: Cannot find device entry on socket fd 7 for message 0
    Oct 26 17:52:41.995: Cannot find device entry on socket fd 7 for message 0
    Oct 26 17:53:02.064: Cannot find device entry on socket fd 7 for message 0
    ADVILLA-2811#
    Oct 26 17:54:24.556: socket 3 fatal error 260! can't read msg header with size -1, fd 3
    Oct 26 17:54:24.556:  it's a stale socket! delete it!!
    Please advise the issue.. thanks..

    This could be a compatibility issue. Looking at the feature matrix, 15.1 is CME8.8 and only has support for SCCP42.9-2-1S.loads. Even the latest CME (10.5) only has listed support for 9.2.1 on 7962.
    I would try downgrading the phone firmware to 9.2.1 and see if you continue to have the issue.
    Also, make sure you are advertising all the following files on TFTP:
    SCCP42.9-2-1S.loads
    apps42.9-2-1TH1-13.sbn
    cnu42.9-2-1TH1-13.sbn
    cvm42sccp.9-2-1TH1-13.sbn
    dsp42.9-2-1TH1-13.sbn
    jar42sccp.9-2-1TH1-13.sbn
    term42.default.loads
    term62.default.loads

  • MBP will not register with iCloud servers (and most iCloud features + Handoff and Continuity do not work)

    Hi all,
    I have an extremely strange issue on my rMBP which has not been solved yet despite over 2 hours on the phone with Apple support, and another hour after being put through to a Senior Advisor, and several online chats.
    I have a Apple Certified Refurbished Late 2013 Retina Macbook Pro, which has a 2.3Ghz i7, 16GB of RAM, 500 Flash Storage and the NVIDIA discrete graphics. It was purchased in December 2014 on the Apple Store. It is running 10.10.2.
    For some reason, my computer WILL NOT register with iCloud. Messages and Facetime both would not work, my iPhone 4S which is capable of text message forwarding would not recognise it and allow me to turn it on. Handoff, Continuity and Instant Hotspot - basically any of the features to do with iCloud or connecting to another device - do not work.
    Originally I believed it was just an issue with Messages and Facetime so I reinstalled the OS back to 10.10.1, but that did not solve the problem. All my Messages contacts kept on coming back as 'not registered with iMessage' and I could not turn on SMS Relay either.
    I contacted Apple on Wednesday night and ended up talking to several different people, the Senior Advisor was the most helpful - really tried to help me figure out what was wrong, and to fix it - wonderful help, really was. They used screen sharing and were quite confused. They figured out as well that Handoff, Instant Hotspot, and all those other features don't work either. At this point, they made me update to 10.10.2 to see if it was an issue with the update, but to no avail.
    Eventually, the SA checked my iCloud account and saw that the computer hadn't even connected to iCloud, and wasn't even showing up as one of my devices, despite the fact that I had signed into iCloud on this computer.
    The SA told me that he suspected it must have been something to do with hardware, but didn't know what it could be. He said the only time he had seen this before was on a refurbished laptop when the serial number hadn't been put back on, but my serial number was there, so he said it must have been something to do with Bluetooth or Wifi.
    Wireless seems to work completely fine, but there is a strange thing with Bluetooth in which within System report says that the computer is not discoverable or connectable, despite the fact that in the Menu Bar it says it is on and discoverable. It becomes discoverable and connectable once you toggle the switch in System Preferences.
    I was planning to book a Genius Bar Appointment as suggested by the SA, but something strange happened today - all of a sudden, some (not all of them) of my iMessages from earlier today came through. Still no working Handoff or Facetime or Continuity, but now I am starting to wonder what is really wrong.
    Despite the fact they said it was hardware (especially Bluetooth), what could explain why it (seldom) or will not register with iCloud? Can anybody shed some light on the situation and whether a Genius Bar appointment could help fix it?
    Cheers and thanks in advance.

    Needed to add some clarification here:
    iCloud shows me as signed in, but Calendars are NOT checked
    Internet Accounts shows Calendars as syncing

  • 11gR2 Install Error, Listener is not up or database service is not registered with it

    Hi all,
    I'm currently studying towards my OCA, I've passed 1z0-051 (SQL Fundementals I), and now I'm moving onto 1z0-052 (Admin 1).
    Im really having trouble creating a database in Oracle 11g R2 Enterprise Edition. I install the software no problem. Then I create a database, and during the creation I have to createsa listener which uses TCP (default port:1521) and IPC. whilst creating the database I get the following error
    'Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM configuration Assistant again.'
    Now, before you lynch me, I have searched this forum for answer to this for a day and a half. I've also tried google, i just can't find a answer that sorts out my problem. please assist me.
    I'm running on Windows 7 Professional (32bit) (I have previously tried on the 64 bit version with teh same results).
    Here's teh contents of my listener.ora file:
    # listener.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = CLRExtProc)
    (ORACLE_HOME = C:\app\Damien\product\11.2.0\dbhome_1)
    (PROGRAM = extproc)
    (ENVS = "EXTPROC_DLLS=ONLY:C:\app\Damien\product\11.2.0\dbhome_1\bin\oraclr11.dll")
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = ipc))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.4)(PORT = 1521))
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    ADR_BASE_LISTENER = C:\app\Damien
    Here's the contents of my tsnames.ora:
    # tnsnames.ora Network Configuration File: C:\app\Damien\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORACLR_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (CONNECT_DATA =
    (SID = CLRExtProc)
    (PRESENTATION = RO)
    Here is the last fe lines of my emConfig.log:
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil isLocalConnectionRequired
    CONFIG: isLocalConnectionRequired: true
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
    CONFIG: isLocalConnectionRequired: true. Connecting to database instance locally.
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
    CONFIG: SQLEngine connecting with SID: orcl, oracleHome: C:\app\Damien\product\11.2.0\dbhome_1, and user: SYSMAN
    Jan 18, 2014 9:38:22 AM oracle.sysman.emcp.util.GeneralUtil initSQLEngineLoacly
    CONFIG: SQLEngine created successfully and connected
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
    CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1655)
    at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeSql(SQLEngine.java:1903)
    at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3230)
    at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
    at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
    at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
    at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
    at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
    at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
    at java.lang.Thread.run(Thread.java:595)
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
    SEVERE: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
    Refer to the log file at C:\app\Damien\cfgtoollogs\dbca\orcl\emConfig.log for more details.
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig perform
    CONFIG: Stack Trace:
    oracle.sysman.emcp.exception.EMConfigException: Listener is not up or database service is not registered with it. Start the Listener and register database service and run EM Configuration Assistant again .
    at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)
    at oracle.sysman.emcp.EMReposConfig.unlockMGMTAccount(EMReposConfig.java:1001)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:346)
    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
    at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
    at oracle.sysman.assistants.dbca.backend.PostDBCreationStep.executeImpl(PostDBCreationStep.java:968)
    at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
    at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
    at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2667)
    at java.lang.Thread.run(Thread.java:595)
    Jan 18, 2014 9:38:23 AM oracle.sysman.emcp.EMConfig restoreOuiLoc
    CONFIG: Restoring oracle.installer.oui_loc to C:\app\Damien\product\11.2.0\dbhome_1\oui
    My Listner status output is here:
    LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 18-JAN-2014 10:14:39
    Copyright (c) 1991, 2010, Oracle.  All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=ipc)))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
    Start Date                18-JAN-2014 09:27:34
    Uptime                    0 days 0 hr. 47 min. 6 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   C:\app\Damien\product\11.2.0\dbhome_1\network\admin\listener.ora
    Listener Log File         c:\app\damien\diag\tnslsnr\LONDON\listener\alert\log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\ipcipc)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.4)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    I can login as sys into my database through sqlplus, so it seems the database is up and running, it just seems to be a listener problem maybe??
    Many thanks for any assistance that you give. I'm learning so be gentle...
    Damien

    SOLVED!
    OK all solved now, thanks to the link to Ed Stevens website that Baris posted (mucho respect )
    Seems that like Barus said I was not using Dynamic Registration, which means that I would need to manua
    ly update the listerner.ora file. On top of that it seems that for some my tnsnames.ora wasn't resolving mt database name so the tnsping wasfailing.
    What I did to solve the name resolution problem
    1. Opened the
    Network Configuration Assistant and saw that my listener didnt have my DB registered with it. So I added it. What this horrible GUI tool does is update the tnsnames and listener.ora files for you. So once that was done I went to the command prompt and did ;'tnsping <dn name> and hey presto it was getting a nice response.
    Then I re-ran my DB Configuration Assistant and tried to reconfigure my database. However it aing failed and gave me the same message that I was originally getting about the DB Service not being registered etc..the lister status still said that same thing:
    Services Summary...
    Service "CLRExtProc" has 1 instance(s).
      Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    the 'unknown' means that the DB  didnt tell the listener that it was there but instead the listener is in manual mode and will just use the configuration in the listener.ora to know where the DB is.
    So then I followed the steps on the ED Stevens website (follow the link). He has steps which show how to enable Dynanmic registration so that your DB regusters itself with the listener. In a nutshell, he states that he listener actually doesnt need the listerner.ora if using dynamic registration. I shutdown the DB, stopped the listener then I renamed the lsitener.ora to listerner.old, then started the lietener and checked the status and it said 'the listener supports no service' I then started the DB and, then resched teh listener status, it then read 'status: READY'... hooray!, the DB had dynamically registered itself with the listener. I then was able to successfully start up and run Enterprise Manager.
    Thanks for all your help Baris, and Ed Steven website.
    I know more now than when I started so I'm happy.
    Thanks.

  • The collection you specified does not exists or is not registered with the ColdFusion Search Service.

    While upgrading to CF7 from CF5, I am creating the new collections from Cf Admin. After creating, I indexed it from cf admin and then trying to search for the documents in that collection, and i am getting the following error. This was working yesterday. I have cheched the logs etc and nothing seems helpful in discovering what the issue is.
    Document count is 11,745 and the size is 25,948 kb, which is not too much for a collection. I have tried to restart Cold Fusion Search Services and then ColdFusion Application services, but all in vain.
    Any help on this would be greatly appreciated.
    Detail
    The collection you specified does not exists or is not registered with the ColdFusion Search Service.
    Message
    The collection rc_collectiom does not exist.
    StackTrace
    coldfusion.tagext.search.CollectionDoesNotExistException: The collection rc_collectiom does not exist. at coldfusion.tagext.search.SearchTag.verifyLocale(SearchTag.java:819) at coldfusion.tagext.search.SearchTag.doSearch(SearchTag.java:200) at coldfusion.tagext.search.SearchTag.doStartTag(SearchTag.java:159) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfeFull2dText2dReDirect2ecfm511389924.runPage(C:\Inetpub\wwwroot\External\FullText\eFull- Text-ReDirect.cfm:43) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfApplication2ecfc179940445$funcONREQUEST.runFunction(C:\Inetpub\wwwroot\External\Applica tion.cfc:114) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:344) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:290) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:254) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:56) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:207) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:169) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:194) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:146) at coldfusion.runtime.AppEventInvoker.invoke(AppEventInvoker.java:72) at coldfusion.runtime.AppEventInvoker.onRequest(AppEventInvoker.java:178) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:215) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115) at coldfusion.CfmServlet.service(CfmServlet.java:107) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

    So at last I figured this out myself and found a temporary resolution for this kind of problem. Majority of the times try creating the Collection through Cfcollection tag and then index it using cfindex tag, rather than performing these operations from the Cold Fusion 7 administrator.
    The only reason I can think of which might have caused the issue is – I have thousands of documents in the collection which I indexed. So while indexing the page gets expired. So I tried again to index it. This time the collection got indexed fairly quickly and I got the response that the collection has been indexed successfully. So for the first time when I tried to index the collection, there might be some piece of code, which did not register the collection properly and hence giving this error.
    When I did the same function using the code, with exactly same set of documents, it did not throw any error, even when I executed it for the first time. So the collection indexed properly.
    I am not claiming that technically this theory is correct, but this seems to be the problem.
    If someone knows technically what has happened at the back, please share it. For the time being, this is the fix – if you experience any problem in creating/indexing collections through cfadmin in CF7, do it thorough code.

  • Phone numbers are not registered with iMessage

    Hey all.
    I've installed Mavericks a few days ago .
    I've synced my contacts with iCloud to my macbook air and noticed that I can send iMessage to email adresses only, not phone numbers. while on my iphone it is possible to send iMessage to any number (if it's iphone of course).
    if I type the name of the contact or his phone number - it turns red and says "contact is not registered with iMessage".. Clearly they are, because i can send them iMessages through my iPhone.
    What am I missing ? Is there any way to fix it ?
    Thanks in advance,
    Lord021

    Handoff Continuity Troubleshooting
    Handoff Continuity Troubleshooting (2)
    SMS Relay - Set up and use –Yosemite/ iOS 8

  • CF8 Verity "The collection you specified does not exist or is not registered with the ColdFusion Search Service."

    I'm running ColdFusion 8 Enterprise on linux. I'm able to
    create collections and index them through cfadmin as well as in cfm
    application pages, but when trying to search I get the error
    &quot;The collection you specified does not exist or is not
    registered with the ColdFusion Search Service.&quot;
    I'm using the collection name in cfsearch and not the full
    path.

    Would I have been better off posting this in the General
    Discussion section? Could the moderators move it if so,
    please?

  • DMP not registering with DMM

    Hi,
    Im using a lab setup connecting DMPs through a WAN connection.I can PING the DMP IP Address but the DMP is not registering with DMM.
    Sometimes it comes up and again it comes down.
    I have attached a screen shot of my DMM applience

    Hi,
    I have the same problem.
    I want to have the DMM and the DMP in different subnets over a WAN.
    The DMPs semm to register, but I cant't display anything and the status changes to failed in 2-3 minutes.
    When I restart the DMP again seems to be ok, but when I submit any picture, video... I can't see anything on the tv.
    The DMP in the same LAN works properly.
    I have nated all the ports to the private ip in the router which is connected to the DMM, and the same in the router connected to the DMP.
    I don't see messagges in the syslog of denied packets .
    How can I connect DMM and DMP over a WAN?

  • I am trying to send a text message from my iPad when I enter phone number I get error message phone number not registered with iMessages  from contacts

    When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.

    TestnTag wrote:
    When attempting to send text message from iPad I get error message "phone number not registered with iMessage REMOVE" the number is for iPhone an includes area code and country code. How do u register a number with iMessage?.
    The iPad is not capable of sending an SMS message so texts, pictures, etc., must go through iMessage.  The destination device must be registered with the Apple servers by turning on iMessage.  Therefore, the user with the iPhone must enable it for iMessage.

  • I am using a GLOBE prepaid microsim for my new ipad with retina. i was registered with supersurf 999, and i was able to enjoy my internet connection until i updated my ios with 6.1... every time i go online,it says i am not registered with mobile intrnet?

    i am using a GLOBE prepaid microsim for my new ipad with retina. i was registered with supersurf 999, and i was able to enjoy my internet connection until i updated my ios with 6.1... since then, every time i go online,it says i am not registered with mobile internet... however, when i insert the microsim on my broadband, i can actually go online... what to do??? my apn setting in internet.globe.com.ph which is for prepaid users...

    PS - I just sent this to a few of my friends in the big hardware review sites, as well as a few apple execs:
    Whats up guys? Its your old buddy dom "battleship mtron author , 9 ssd drives in raid 0" years ago. lol
    I wanted to fill you in on a HUGE problem with the new ios 6 update.
    My iphone 4 updated without a hitch.
    My ipad 3 on the other hand has a HUGE PROBLEM. It is essentially a brick without wifi (since the device relies on wifi for just about every task).
    There are currently hundreds of a users within the last 2 hours reporting the same error on the apple discussions site.
    https://discussions.apple.com/message/19626235#19626235
    What happens is simple:
    1. Download and install the update on Ipad 3.
    2. Try and connect to your normal wifi connection.
    3. It will connect for a few seconds and than fail stating "no internet connection available"
    4. It is no a brick without wifi accessibility. (unless we revert to ios 5)
    I have tried resetting my router. Resetting settings on the ipad. Renewing the ip address both LOCALLY and through the WAN at the cable modem and rebooting all of my networking equipment (ie: router), I even tried doing a complete wipe and re-install of ios 6 fresh. You guys know I am a tech geek from my background and I have tried everything so I just wanted to fill you in on this potential problem for apple.
    Regards,
    Dominick
    Owner, nextlevelhardware.com (retired)

  • Help. Trying use imessage and keep getting an error message that says the person is not registered with imessage

    I am trying to use imessage and everyone I am trying to send to I keep getting a message that they are not registered with imessage. They all have iphones and I know for a fact they are all registered. I have tried all the trouble shooting steps I have found so far. I made sure my imessage is turned on and set under my apple id and email, I'm connected to wifi. etc... I can use facetime but can not message anyone. Thanks in advance for you help

    Hi, reagans3.
    Thank you for visiting Apple Support Communities.
    I see you are experiencing issues with iMessage.  I am not sure what troubleshooting steps that you have processed; however, there are some additional steps in the article below that may help.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Cheers,
    Jason H.

  • TS4268 I am able to imessage from my ipad all phone numbers in contacts but one. With it a get an error message that say "number is not registered with imessage". However I am able to imessage that number from my iphone. Any suggestions?

    I am able to imessage from my ipad all phone numbers in contacts but one. With it I get an error message that says "number is not registered with imessage". However, I am able to imessage that number from my iphone. Any suggestion?

    Hey joshuafromisr,
    If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/HT1925
    or here:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Best,
    David

  • I can't texted people on iMessage that are not registered with iMessage

    hello,
    I have my iphone, ipad and mac book pro all link together with imessage my phone works fine but if i want to text a person from my mac book or my ipad that are not using an apple product it says the number is not registered with imessage how can i send regular texted with my mac book or ipad.
    thank you

    Hello there, DJ Jason B.
    The following Knowledge Base article provides clarification about how Messages works and which options are available:
    iOS: Using Messages
    http://support.apple.com/kb/ht3529
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT4623 Why my phone number is not registered with iMessage?

    Hi Mark, I have 2 iphone but about Why my phone number is not registered with iMessage? I try on/off my iphone but i didn't sucessfull

    Turn imsg off/on.
    If that doesn't work, I would than backup your data (considering the troubleshooting steps already listed) and "Erase all content and settings" on the device and setup as a new iphone and test imsg out in factory default. Try to activate your phone in factory default. If it shows your number / activates, there may be something in your current settings preventing imsg from operating / activating. If it does not activate, get in touch with carrier.
    http://support.apple.com/kb/HT4137 <--- Follow this
    Restore from backup after troubleshooting this.

  • The ELResolvers for JSF were not registered with the JSP container

    I'm trying to configure mojarra on tomcat6 (because I want to use Elastic Beanstalk). tomcat complains:
    Feb 8, 2011 10:24:17 AM com.sun.faces.lifecycle.ELResolverInitPhaseListener populateFacesELResolverForJsp
    INFO: JSF1027: [null] The ELResolvers for JSF were not registered with the JSP container.
    I have tried all sorts of combinations of replacing EL2.2 libs in tomcat/lib, putting the libs in WEB-INF/lib, and the context param:
    <context-param>
    <param-name>com.sun.faces.expressionFactory</param-name>
    <param-value>com.sun.el.ExpressionFactoryImpl</param-value>
    </context-param>
    JSF pages seem to work but I'd rather have a clean startup. Please assist. Thx in advance.

    Thx for replying.
    I have jstl-1.2.jar:
         <dependency>
                   <groupId>javax.servlet</groupId>
                   <artifactId>jstl</artifactId>
                   <version>1.2</version>
    <scope>provided</scope>
              </dependency>
    Which version numbers are you referring to in *.xml? The following?
    <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns="http://java.sun.com/xml/ns/javaee"
    xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
    xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
    version="2.5">
    <faces-config xmlns="http://java.sun.com/xml/ns/javaee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/javaee
    http://java.sun.com/xml/ns/javaee/web-facesconfig_2_0.xsd"
    version="2.0">

Maybe you are looking for