7921 wich firmware versions are these?

Hi,
I have seen these firmware versions in some of my 7921 iphones (trough web GUI or ip phone menu):
System Load ID CP7921G-MFG-C.2.LOADS
System Load ID CP7921G-MFG-A.7.LOADS
What firmware version are?
Best Regards,
MC

D.7 equates to 1.3(4)SR1. If pre-loaded with that mfg image then more than likely you have a 7921 hw rev that can not downgrade to 1.3(3).
We do have a 1.3.3.0.3 ES that can be loaded onto the 7921s and has the same scanning and roaming logic.
Otherwise would suggest to upgrade to 1.4(1)SR1, which is available on Cisco.com for download, but the scanning and roaming logic was altered a bit as of the 1.3(4) release.
If you want 1.3.3.0.3, open a TAC case.
If you want to go forward with the latest generally available phone load, would suggest to try on a phone or two first before doing a bulk upgrade. Can extract the zip contents and upload 1 by 1, restart TFTP service, set the necessary phones to the desired phone load, then restart the 792x phone to upgrade the image.
This way will not impact other phone firmware.

Similar Messages

Poll **IMPORTANT!** From wich Firmware version did you update your Zen XTRA. Was it succesf

It's only a theory, but I guess the horror stories I've been reading about dead players after trying to update to the latest firmware has to do with the version you're updating from. Maybe I'm wrong, but we could make a statistic and try to find out if the success rate increases with any specific version.
Maybe Cat could help and publish a Poll with multiple selection choices in stead of this thread? I would apreciate it very much!
Best wishes
Alen

The MTP Protocol is the way that the PlaysForSure firmware communicates with your computer. Windows Media Player 0 is a big part of PlaysForSure/MTP. If you intend to use the PlaysForSure firmware then those 3 hotfixes should be applied, as they do improve Windows Media Player 0, but all other programs which will recognize your PlaysForSure player, such as Media Source, can perform better. If you are having problems transfering music with Media Source, then always try Windows Media Player 0 because if it doesn't work with WMP0, chances are it wont work with any other program. The other stuff listed, such as wdfmgr.exe and the registry changes are to help with the player being detected properly on your computer.
Editing the registry can cause problems with your computer, however if you only edit that directory then you should be fine. In any case backing up your registry is recommended. For more on Registry Editing read this:
<a href='http://support.microsoft.com/default.aspx?scid=kb;en-us;322756' target=_blank>http://support.microsoft.com/default.aspx?scid=kb;en-us;322756[/url]
But do download those 3 hotfixes, and check for wdfmgr.exe, and also do the registry changes. If none of those are working then you might need to send your player in to Creative...

[Java 3D] Wich OpenGL versions are supported by natives libraries ?

Hi,
anyone could tell me which OpenGL specifications are supported by Java 3D natives libraries ?
Thanks in advance.

Hi,
Java 3D requires at least OpenGL 1.2. It runs on all newer releases up to the current release 4.1 and will run on future versions. Java 3D creates an OpenGL compatibility profile context supporting the (legacy) fixed function pipeline as well as the OpenGL Shading Language GLSL.
Java 3D's on-screen and off-screen rendering capabilities correspond to OpenGL 2.0 and support vertex and fragment shaders inclusive newest shading language features. On my OpenGL 3.2/DirectX 10 capable graphics device I successfully ran GLSL 1.5 features, see http://www.java.net/forum/topic/javadesktop/java-desktop-technologies/java-3d/shaders-java-3d-0 .
August

Need a Script to Audit Firmware version of HP components.

Hi Team,
I am new to this portal, I am not sure if i have selected the correct board for this issue. If not please redirect thie thread to the correct team or guide me the link to the HP Blade system portal.
My issue:
We have 285 HP Servers, Where almost 275 are HP Proliant BL460 G7 & G8 Blades and the rest are HP DL380P and DL380 Standalone servers.
We recently did a HP SPP Update on all these machines and now for a reason we want to Audit if the component updates were correctly done by our engineers or not.
How ever for HP OS Components i have a script to Scan the registry and pull the Product version and match it to see if it has the Latest version or not.
But how do i do an Audit for the ILO'S of these machines and the Onboard Administrators and the HP Virtual connect if the firmware versions are correct or not ?
Is there any script or any Method to achieve this ?
We also have HP SIM tool as well, Can we do it form that? If yes then how ? Can any one please help in this ?

Frederik, After some tweaking and testing i was able to get it working, I haven't tested it via GPO as a startup script but standalone it is doing what i was after. I cant thank you enough for helping me on this as i had lost hope after days worth of intense
searching
Change that i had to apply ( space in a network path
was causing a "path not found error", Had to rename the "Office365 update" and update the path in Customconfig.xml or any other location that was pointing to "office365 update" )
set DeployServer=\\contoso\c2r\Office365 update\
REM Set ConfigFile to the configuration file to be used for
deployment (required)
set ConfigFile=\\contoso\c2r\Office365 update\Customconfig.xml
REM Set LogLocation to a central directory to collect script
log files (install log files are set in XML file).
set LogLocation=C:\AppData\Local\Temp

How to query for a firmware version?

Hi,
My customer requires to report all firmware versions for all components. How do I acquire a firmware version for a PXI card? I have a number fo card (PXI-5421, PXI-4072, PXI-6653).
Thanks
CT

Hey Cimteker,
Firmware is handled differently accross various cards. Unfortuantely because of this, there's no one easy way to get firmware versions for everycard since it isn't all handled in the same way. I'm curious what the overall application is and why all of the firmware versions for the cards are needed. The driver version updates all the firmware that's necessary. Because of this, alot of time firmware is driver dependant.
Do you by any chance have an open service request with this same issue? We're currently looking into the firmware versions for these cards, and I'm wondering if the two issues are tied together.
The PXI-5421 is an arbitrary waveform generator FGEN device. with FGen, there's a VI inside of the driver that will actually return the firmware. It's called niFGEN Revision Query VI. You can get there by going to NI-FGEN » Utility >» niFgen Revision Query.vi. I also believe niSCOPE has the same situation.
Lea D.
Applications Engineering
National Instruments

Are these suggestions speficic to the Windows version of Firefox? Because on my Mac version (31.0) there is no "options" in the Tool menu

Are these suggestions speficic to the Windows version of Firefox? Because on my Mac version (31.0) there is no "options" in the Tool menu.
I'm trying to figure out why Firefox has no spellcheck. I suspect it needs dictionaries installed, but it's a bit of a mystery. I had to reste FF as it kept crashing after I updated to V31.0

Yes Options is for Windows.
On Mac you use "Firefox > Preferences" or the Preferences button in the "3-bar" Firefox menu button drop-down list.
You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.
At least one dictionary should be installed and have a check mark to indicate that it is selected.
*Open the "Add Dictionaries" link to install a dictionary if you do not have one.
*Make sure that [X] "Check Spelling" in the right-click context menu is check-marked.
You can enable or disable spell checking globally:
*Firefox > Preferences > Advanced : General: Browsing: "Check my spelling as I type"
You can look here for dictionaries:
*https://addons.mozilla.org/firefox/language-tools/
Were you able to stop the crashes?

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?

When going from a Mac-based Ai to a PC based Ai, the documents "Font" are not found on the PC version? (mostly Helvetica) where and how do I get those Fonts? And/or, can I use the Mac version of these Fonts?
Thanks, Rich

In order to be cross platform you must be using the Open Type version of all fonts to cause the least disruption. Macs can read and process the Windows .ttf type format but PCs can't process Mac formatted type. Most recent versions also cannot use the older PS Type 1 fonts.

I want Photoshop and InDesign- If I buy two "single app" subscriptions it is $40/month but if I buy the single app subscription for InDesign and the Photography package it is $30/month. Am I missing something? Are these different versions of Photoshop?

I want Photoshop and InDesign- If I buy two "single app" subscriptions it is $40/month but if I buy the single app subscription for InDesign and the Photography package it is $30/month. Am I missing something? Are these different versions of Photoshop?

Hi,
No it's the same Photoshop .Photography program is just a temporary promotion pack with Photoshop and Lightroom and it can end anytime .So you can buy Indesign and photography to have Indesign,Photoshop and Lightroom .
Regards,

Are the 'updates' for the CC versions the same as the 'install (2014)' version? uninstall CC version, download 2014 version of these various apps? confusing

are the 'updates' for the CC versions the same as the 'install (2014)' version? uninstall CC version, download 2014 version of these various apps? not a hi-tech deal but confusing all the same

Uninstall the CC version unless you still need it for something. You can run both versions however until you know you don't need the old one anymore. The old CC was 32-bit and will no longer be getting updates and the 2014 version is 64-bit and a lot better as it is not run on Adobe Air like the CC version. It's basically a new program.

HT201272 I am trying to load Jetpack Joyride and Subway Surfers to my ipod touch 3rd generation and the store tells me I need a newer version of software on my ipod. I try to load an update and it tells me I am on a current version. Are these only for i

Are these applications available for a touch or only for an iphone or ipad?

If iOS 4.2.1 is as far as your iPod will go... Then... yours is a 2nd Gen.
Identify iPod Models
http://support.apple.com/kb/ht1353

Problem with restore.I have a 2 gen running firmware version 4.2.1

Hello there !
Hopefully some smart persons here will be able to help me. First it has been awhile since i used my itune store because i didnt needed to and did a format of my computer after the last time i used it..so i had to upload my library etc and start from scratch. I downloaded a couple new games,everything was working fine..then when it came the time to sync and put these games on my ipod touch 2 gen the installation failed. I retried again and it keeps failing again and again so i choose to do a restore on it and expecting the problems would be solved. Problem wasnt not solved at all and it said an error (6) occured and i have the image on my ipod of the white cord trying to connect to itune store.
Restore doesnt work at all and it seems like my ipod is totally useless as i cant use it anymore. I did the diagnostic..it said no ipod were found. I also did the check up thing for the technician so ill paste it here maybe it will give some clues..
I have this error now as well... No iPod, iPhone, or iPad found. It also said secure link to itune store failed..not sure if these are all related to the same problems or all different at all..im clueless and need a generous soul to help me out.
Thank you tons for the help !
@Edit : Even with my other 2gen ipod i cant install these new games,it keeps failing as well..but at leasnt i havent done Restore on it yet and i fear to do it for reason you guys can guess.
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 00AAB2F80F513CD0
Current user is an administrator.
The current local date and time is 2011-07-17 18:45:37.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9500 GT
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:     {B00FE55A-1662-4EE9-B880-6B076869B9F8}
Description:     Contrôleur Atheros L2 Fast Ethernet 10/100Base-T
IP Address:     192.168.2.10
Subnet Mask:     255.255.255.0
Default Gateway:     192.168.2.1
DHCP Enabled:     Yes
DHCP Server:     192.168.2.1
Lease Obtained:     Sun Jul 17 17:51:16 2011
Lease Expires:     Wed Jul 20 17:51:16 2011
DNS Servers:     192.168.2.1
Active Connection:     Connexion réseau
Connected:     Yes
Online:          Yes
Using Modem:     No
Using LAN:     Yes
Using Proxy:     No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is off.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was unsuccessful.
The network connection timed out.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-07-17 18:43:19.
**** Device Connectivity Tests ****
iPodService 10.3.1.55 (x64) is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Contrôleur d'hôte ouvert PCI vers USB NEC. Device is working properly.
Contrôleur hôte PCI vers USB standard étendu. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C8. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27C9. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CA. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CB. Device is working properly.
Contrôleur hôte universel Intel(R) 82801G (ICH7 Family) USB - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod touch (2nd generation) running firmware version 4.2.1
Serial Number:     9E01226F201
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

thats just rubbish ! i bought it secondhand for my daughter to use for music and apps, but its not compatible with anything, any suggestions other then throwing it away?

Can't update to the latest (v52) firmware version ...

Other people can update their software but I cannot, although we have the same Nokia device model. What's wrong?
Update availability is based on many things, including existing Nokia device firmware version, country, and operator. It may be due to one of these variables that your Nokia device isn't eligible for updates.
Please note that your mobile service provider, operator, or carrier may not have approved the latest Nokia device firmware available.
Nokia produces many different variants of each product (for different countries and languages) and not all variants have the latest Nokia device firmware. It is our priority to update all variants as quickly as possible, and we apologize for any delay. New software may become available at a later date, however, so please check again soon.
Is there any other way that I apply the new v52 update for my 5800 XM? Even if it voids warranty? Because I really hate my browser and music crashing, battery eating - from full to empty in ~1.5hour, meanwhile the phone is really hot and it is in stand-by - no programs running.
Info:
I am from Slovenia, my phone model is RM-356, current version V51.0.006 - installed on 19.11.2010. Language Slovene, 7. Serial - under the battery 0579282. Tryed updating via Wi-Fi on the phone, via PC - with "Nokia Software Updater", both said there is no new firmware available, while there is obviously.
Any help appreciated!!

I understand that this is a real bummer and painfull.
There is unfortunately nothin we can do to help you to get the most recent update if it ain't made available for your device.
From the power consumption, there could be an issue related to hardware which only a care point can fix.
However, you could back up what you need and perform a soft reset to wipe the phone memory, then install your apps one by one to check if there is an app or more causing this. You can also try to reinstall the fw with Ovi suite. Just connect and check if it's possible to do so, then back up your content and proceed.
I cannot guarantee that this will fix it, but it might be worth a try if youre without warranty.
Have you checked if there are a warranty checker tool available on your local Nokia site?
The Nokia browsers has always been a bit sensitive, so I suggest you download opera mobile or opera mini and install it on your phone memory (C: ) Should be much more stable.

UCS firmware version question

Hello guys!
I've seen from Cisco download for UCS B series firmware versions, there are 2 latest versions which 2.2.(1d) and 2.1.(3c), what are the different between these 2 versions? My current firmware is 2.1.(1b), should I update to 2.1(3c) or 2.2.(1d)? Thanks.

Hello,
The difference is that they belong to different chains (one is 2.1 and the other 2.2) where we made some improvements in the firmware. UCS, unlike other Cisco devices, do not follow an specific order in the firmware versions released; so you may see, at anytime, how a 2.1x version may be newer than a 2.2x version; precisely cause that 2.1x will be the newest one for the 2.1 chain while the 2.2x will be the newest one for the 2.2 chain but release on a different day.
The other difference is the bugs we fixed on each release, which might not be included in the other one.
The UCS behavior can also change from version to version, and here is an example: https://supportforums.cisco.com/discussion/11673921/default-zoning-users-heads-ucsm-21
If you want to see how one version differs from the other, what you can do is to check the release notes for each one:
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/UCS_28313.html <<<< 2.1 Release Notes
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/ucs_2_2_rn.html <<<< 2.2 Release Notes
Rate ALL helpful answers.
-Kenny

How to determine GPIB-ENET firmware version?

I have several of the older GPIB-ENET units. I see the latest firmware binary on the FTP site is A5. I'm pretty sure our units have olders revs since they were installed several years ago. However the manual says to only update the firmware when necessary since there are a limited number of times the firmware can be updated.
My question: Is there a way to determine the device firmware version so I'm positive I need to update?
I notice the new EthernetConfig utility for GPIB-ENET/100 devices shows the firmware revision when you select the device. Can this utility also "see" older GPIB-ENET devices and show the firmware revision for these older devices as well?

Hi,
Could you email in to the technical support deparment? You can go to www.ni.com/ask. We'll try some alternatives.
DiegoF
National Instruments.

Latest Firmware version for Nokia 5800 in India?

I am currently using a Nokia 5800 with firmware version v50.0.001.
I have installed the latest Nokia Suite (3.7.22) and it reports that there are no firmware updates available. I tried to find the updates using the Menu->Applications -> S.W Updates as well. This doesn't report any firmware updates either.
But the Nokia India page for 5800 states that the latest version is 60.
Latest software release for Nokia 5800 Xpress Music is 60.0.003
New, faster version of the web browser, including web search integrated into the web address field, and support for multiple windows and web addresses containing non-Latin characters
New Big clock feature, displaying the time and date when you press the menu key, if the screen and keys are locked
Ovi Contacts removed
Usability improvements
Performance improvements
How do I update to the latest firmware?
Solved!
Go to Solution.

Availability of update depends on Product Code / Region. Also, for Network locked devices, update is possible only after an approval from the Operator. Seems oone of these is preventing you from getting the update. As both FOTA nad Nokia Suite is not providing you with the update there is nothing that you can do except asking your local Nokia Care whether they can help you ...

7921 wich firmware versions are these?

Similar Messages

Maybe you are looking for