7940 Config and flash issues

Hi, i'm hoping somebody can please help me.
I have been using VOIP via a softphone for a couple of years now, I decided that I wanted to have a go at setting up a Cisco phone. So I have got a 7940G second hand which works fine. I am a home user trying to learn so I am using a BT Homehub with dynamic IP and SIP on voip-talk.org
The phone was still configured form the previous owner with subnet, DNS, FTP, VLAN etc. I couldn't find a how to edit these settings, so I thought if I set it back to factory defaults, told it to delete network cfg. I thought on restarting it might ask me to input the detail? but it showing "configuring VLAN" and then constantly stays on "configuring IP"
although it stills picks up an IP via DHCP and I can ping it ok, I can also browse on to the web interface which show the following info
DEVICE INFO:
MAC Address 00137FA9D10B
Host Name SEP00137FA9D10B
Phone DN
App Load ID P00307020400
Boot Load ID PC0303010100
Version 7.2(4.0)
Expansion Module 1
Expansion Module 2
Hardware Revision 4.4
Serial Number INM09101LK3
Model Number CP-7940G
Codec ADLCodec
Amps 5V Amp
C3PO Revision 2
Message Waiting NO
NETWORK CONFIG:
DHCP Server 192.168.1.254
BOOTP Server Yes
MAC Address 00137FA9D10B
Host Name SEP00137FA9D10B
Domain Name home
IP Address 192.168.1.68
Subnet Mask 255.255.255.0
TFTP Server 1
Default Router 1 192.168.1.254
Default Router 2
Default Router 3
Default Router 4
Default Router 5
DNS Server 1 192.168.1.254
DNS Server 2
DNS Server 3
DNS Server 4
DNS Server 5
Operational VLAN Id
Admin. VLAN Id
CallManager 1
CallManager 2
CallManager 3
CallManager 4
CallManager 5
Information URL
Directories URL
Messages URL
Services URL
DHCP Enabled No
DHCP Address Released Yes
Alternate TFTP Yes
Erase Configuration NO
Forwarding Delay YES
Idle URL
Idle URL Timer 0
Authentication Url
Proxy Server Url
PC Port Disabled YES
SW Port Configuration AUTO
PC Port Configuration AUTO
TFTP Server 2
User Locale
Network Locale
Handset Only Mode No
User Locale Version
Network Locale Version
GARP Enabled Yes
Voice VLAN Enabled Yes
Auto Line Select Enabled No
Video Capability Enabled No
DSCP For Call Control default
DSCP For Configuration default
DSCP For Services default
Security Mode Non Secure
Web Access Enabled
Connection Monitor Duration 0
PC VLAN
Basically I need to know first all how to at least change the settings, as I don't have access via the phone itself or the web interface. And I will probibly also need to reflash the firmware with something that will do SIP.
Thanks for looking and your help

Hi
I think the main issue you have with this phone is that its not picking up a TFTP server IP address and therefore cannot download any configuration details.
As a start i'd check that the IP address range that it has got via DHCP has an option 150 setup to your CUCM TFTP server.
Once its got this, if you have auto registration setup if should at least boot up
Hope this helps
PKS

Similar Messages

  • Samsung Note 3 Camera and Flash Issues

    I have a Samsung Note 3 that is only a few months old and the Camera continues to not function correctly.
    Android 4.4.2
    * Flash will randomly turn off and I will need to restart my device to get it working again.
    * Pictures taken with camera are slow and very often out of focus.
    The camera flash issue is something most people might not notice until they absolutely need the flash.
    The camera taking a long time to focus/take pictures I'm sure a lot of people have seen on a more regular basis.

        Hello Tazman4u, a working phone is super important! My apologies for the issues plagueing your device. Please test the phone in safe mode: http://vz.to/1aFxLK8 If issue persists, you will want to backup contacts, pics, and files to perform a hard reset: http://vz.to/1kpmPp0
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport 

  • MOBIOLA WEBCAM and FLASH Issue

    Hello,
    I've used for a long time Mobiola WEBCAM (app that turns one's iPhone/iPad into a webcam via WIFI) in Skype and video chat sites like Omegle (all done through GOOGLE CHROME), up until yesterday.
    As of today, any of my browsers or my Skype applications on my MAC MINI won't recognize my VIdeo FEED.
    I do get a connection between the iPhone/iPAD and the MAC MINI, but the VIDEO is not being "fed/transferred" for some reason to the browsers or Skype.
    Is it a adobe flash issue? Mac os x issue? I should I proceed?
    Technical INFO:
    Skype version: 6.15
    MAC OS X Mountain Lion 10.8.5
    iOs: 8.1.1 (on both ipad and iphone)
    Google Chrome: 39.0.2171.71 (64-bit)
    Thanks a lot,
    Chen

    Hello MattyEss
    From your posted info, you have been thorough in your troubleshooting and research.
    Because your iSight works perfectly in every app aside from flash, iSight is not your problem.
    Your problem seems to me to be entirely with Flash. Here follow my best suggestions.
    (1) If all your software is up to date and working properly otherwise, your best answers for your Flash-specific problem should be from Adobe, whether via Settings/Help, Flash Forum, or personal assistance. You can find links to all of Adobe's comprehensive help offerings here:
      http://www.adobe.com/support/flashplayer/
    (2) Although I doubt it will help you, if you have a current Flash version installed and want to try one more thing before using Adobe Help, applying the 10.6.6 Combo Update might help you:
      • Backup your Mac and turn off Time Machine
      • Disconnect peripherals and restart Mac
      • Use Disk Utility to repair permissions
      • Download and install http://support.apple.com/kb/DL1349
      • Repair permissions again immediately following the restart that finishes the update.
      • Test Flash. Reconnect needed peripherals and test again.
     (• Turn Time Machine on again when you are satisfied that the update worked.)
    Although I don't think the Combo Update is likely to resolve your problem, it costs nothing but a bit of time to find out if it helps your system.
    We will watch for your status update.
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • [SOLVED]youtube and flash issue

    So, I've got a flash issue that only happens on youtube. It looks like this:
    It happens every time I open a browser (on both firefox and chrome) and goes away after refreshing the page, but its kinda annoying to refresh the page every time I wanna watch a video. Also when switching to fullscreen the video stays in software video rendering when it should switch to accelerated rendering so I get around 10 fps making the video unwatchable (this doesnt happen with windows on the same hardware).
    Other flash websites like vimeo work fine and I can watch vimeo HD videos in fullscreen without any issue.
    This started happening when youtube introduced the new black look of their player (it was all fine and dandy before), and its bothering me ever since so I'm now using flashvideoreplacer extension for firefox but I still want flash to work properly so I can use chrome again.
    I'm using 64-bit arch, flashplugin from extra (getting the same effect with any other flashplugin from AUR) and EnableLinuxHWVideoDecode is set to 1 in /etc/adobe/mms.conf
    Oh and I've tried this on Ubuntu live cd and controls work fine but accelerated video still doesnt work.
    Any help would be appreciated.
    SOLVED:Graphic problem is resolved after installing new version of flashplugin, but still no HW acceleration.
    Last edited by pixy (2012-04-03 21:39:11)

    strangest thing...  a few 'non-youtube' sites still work ok, but still complain 'no javascript' ..
    so went to firefox (v17.0.4 ESR) 'tools, options, content' and yup,  javascript UNTICKED!!   :O :O  my bad memory? something else???  {shrugs}
    ticked it, now ok........  think im getting old??????  ROFL..

  • Firefox and Flash issues

    This transparent flash works great in IE and you can click
    the links under where the flash area is, sprys work...
    http://www.cjmracing.com/index_30.html
    however in Firefox nothing under the transparent flash
    works?? any suggestions.

    This is the Solution that I found, thing is Adobe added something called "Protection Mode" to Flash in 11.3 and you need to disable it and all is well.
    To do that you need to restart your pc so you know flash is turned off other wise you can't modify the config files for it.
    For 32bit users:
    '''C:\Windows\System32\Macromed\Flash\mms.cfg'''
    For 64bit users:
    '''C:\Windows\SysWOW64\Macromed\Flash\mms.cfg'''
    In both cases all you need to do is add:
    '''ProtectedMode=0'''
    To the next line in the file and save it.
    Worked for me, and I had been searching for weeks, if it works for you please do what you can to spread the word!

  • Stage3D and Flash issues with Chrome

    I was playing The Last Stand Dead Zone earlier with all of the settings i nthe flash game set to max and now I HAVE to play it on the lowest setting. Also my Nvidia 765m is apparantly now supported by Stage3D or whatever it is. I really have no idea what to do. This page also has the wrong info about my operating system http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html it says that mine is 32-bit when it is 64-bit http://puu.sh/6derE.png I want to play my game and I am very pissed at the moment because I cannot.

    More issues with Chrome.
    All of a sudden one day I noticed two problem:
    I cannot login to SCN via Chrome.
    SCN search does not funciton.
    If I click on any regular SCN link from e.g. an email notification, the screen gets stuck with a blank screen in authentication mode.
    Similarly, if I enter a search term in SCN search, I get a blank screen.
    Also, if I click "Login" in the masthead, the screen gets stuck looking like this:
    I've cleared cached, reinstalled the browser, and ensured I'm using the proper certificate by eliminating all but the one certificate.
    Any suggestions?

  • IE 7 and Flash issues

    When I attempt to visit the
    Neopets website using IE 7 for
    Windows Vista Home Basic, IE crashes. The problem is not duplicated
    when I use Firefox to visit Neopets. I am suspecting Flash Player
    9,0,28,0 as a possible cause of the problem. What should I do?
    Brandon Taylor

    It seems like Flash Player has issues with IE in general
    compared to FireFox. Should I say it's an ActiveX vs. Plug-in
    issue?
    Example: Whenever I download a FLV file at an enourmous speed
    (2 megabytes+/sec) in IE in a player (progressive download), the
    video horribly hitches until the progressive download completes. I
    can replicate this issue in IE on multiple machines.
    FireFox does not have this issue.
    It's a weird issue and directly related to bandwidth. If I
    use a bandwidth manager and force my max banwidth it no longer has
    an issue when I set it so I can only download 1 MEGABYTE - 1.5
    MEGABYES/sec max. Any higher and the hitching comes into play. The
    faster the download the worse it gets.
    I've also had a coupl einstances where it's totally the
    opposite. Plays fine while downloading super fast and if the
    download haults or slows down to near 0 for some reason, the player
    hitches up or freezes with it. Note, this is like if I am only done
    watching 10% of the video and the massive slowdown starts occuring
    well into it's downloa...50-75% complete. Anyhow, when the download
    kicks back into gear and speeds way up again then the video plays
    smoothly again.
    And agian, I can replicate the habit on two machines does not
    happen in FireFox.
    For the sake of it, the two machines I tested the issue on
    are a 1.8ghz Centrino Duo laptop w/ 1gb of RAM and also a Dual
    3.6ghz Xeon w/ 4GB of RAM.
    The Flash beta player you can get from Adobe labs does
    nothing to resolve this, although I love what else they have
    implemented in with the beta in regards to FLV/On2VP6
    support.

  • Firefox 14.01 and Flash 11.3 Issues

    I was previously having problems with Firefox 13 (forget which version specifically) after it updated with using Flash as many others were. I was excited to see that a v. 14 is now out and updated hoping it would solve my issues, but I am still having trouble. I feel confident it is an issue with Flash; I have gone through and individually disabled and re-enabled add-ons, and can use Firefox fine when Flash is disabled, and everyone goes down hill once re-enabled.
    In general, my issues are that Gmail, Facebook, and many other websites won't load when Flash is enabled. They will start to open, get stuck, and the Firefox completely freezes. Turning off the add-on fixes all of this, and turning it back on brings it back.
    I have Windows Vista as my O/S.
    Any suggestions for further troubleshooting? I've tried uninstalling and reinstalling both Firefox and Flash.

    This is the Solution that I found, thing is Adobe added something called "Protection Mode" to Flash in 11.3 and you need to disable it and all is well.
    To do that you need to restart your pc so you know flash is turned off other wise you can't modify the config files for it.
    For 32bit users:
    '''C:\Windows\System32\Macromed\Flash\mms.cfg'''
    For 64bit users:
    '''C:\Windows\SysWOW64\Macromed\Flash\mms.cfg'''
    In both cases all you need to do is add:
    '''ProtectedMode=0'''
    To the next line in the file and save it.
    Worked for me, and I had been searching for weeks, if it works for you please do what you can to spread the word!

  • I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router....any ideas?

    I am having trouble viewing iStore. It appears as if its a Flash issue, as several minutes after logging in to iStore I get a non-flash page of iStore in my iTunes window. I have re-installed everything and tried opening all ports in router, and used msconfig to bring up each service individually to see if there is an effect.Flash and iTunes have been re-installed  ...any ideas?

    I agree. I don't rely on iCloud as a backup, that is what I have my portable hard drive for. Its 500 GB so I can hold my entire iTunes library several times over on it. I have all my movies on my hard drive, but somehow "The Mist" got deleted off of my hard drive, so I figured "Well, the option to redownload an already purchased movie is available through iCloud, I'll just do that!"
    And permissions and download availability have nothing to do with it, the movie's still there, it still allows me to redownload it. The only problem is when I click download, I get that message.
    And nobody else uses my computer, but I do have multiple accounts authorized on it. Even still though, I am attepmpting to download it through the account I purchased it under. :/

  • I still cannot view flash players in firefox after uninstalling and reinstalling firefox and flash multiple times. how do i fix this issue perminantly?

    I can go into chrome without any issues and watch any video without any problem. the second i get into firefox nothing works. i have had this issue on and off for years. i really do not see why you cannot fix this if everybody else can. i have uninstalled and reinstalled firefox and flash player multiple times. nothing seems to work. I am truly getting really tired of this same problem year after year, i stay with firefox because you are privacy conscience and are being more so consistently. i do not know what other details to tell you other than this just keeps happening and it is making it very tough to do anything on firefox when i cannot use a simple thing such as flash player. as i said, if the other browsers can fix this i see no reason why firefox cannot year after year. i hope there is a simple fix for this problem because it has basically halted a lot of my work on the net as i will no longer use google or microsoft. thank you

    Firefox does not play videos. That is the job of the plugins.
    Security Issue: Update your Flash Player '''v16.0.0.305<br>https://www.adobe.com/products/flashplayer/distribution3.html'''
    If you have problems with current Shockwave Flash plugin versions then check this:
    * see if there are updates for your graphics drive drivers
    '''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
    * disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
    '''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
    * disable hardware acceleration in the Flash plugin
    '''https://forums.adobe.com/thread/891337'''
    See also:
    * '''http://kb.mozillazine.org/Flash#Troubleshooting'''

  • I was wondering if you have fixed the compatibility issues with java and flash players in the new patch

    after update 6.0.0 all java scripts and flash players where incompatible and disabled i tried re-down loading new versions and tried to erase Firefox and all ad-dons and reload them and still had issues with them i had to re-download Firefox 5 to continue to use your program and i wanna make sure that in 6.0.2 i will not have to do the same thing.. it is a head ache and inconvenient

    You're welcome.
    The only workarounds to this problem is going back to Safari 4,
    You can revert to 4.0.5, instructions here.
    http://appletoolbox.com/2010/06/downgrade-from-safari-5-0-to-safari-4-0-5/

  • I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    Hi Seattle
    From Adobe site only!
    flashplayer11_b1_install_mac_071311.dmg
    Works fine.
    Cheers Tomi

  • Firefox 3.6.23 having freezing and rebooting issues with Adobe Flash Player 11 Plugin

    Firefox 3.6.23 is experiencing constant freezing and rebooting issues with Adobe Flash Player 11 Plugin, not sure if it is a conflict issue or not.
    Since the update there had been no reported issues till today when the blue screen came up on me, this issue prior to plug in 11 had occurred at least 6 times, this issue only happens on firefox.
    I do not wish to update since recent firefox browsers seem to have a lot of ongoing issues.

    Anyone able to help please?
    Thanks.

  • Is Vista and Flash CS3 performance issue solved?

    My performances in Flash CS3 are very poor. When I try to
    scroll up-down/left-right I got slideshow. When move the
    framecursor to view the frames I also get slideshow. Searched
    google, do the compatibility settings and the only batter thing I
    get is smoother scrolling of the code. Nothing more. Is this
    solved?
    Im running C2Duo with 4gb 800 ram with Vista x64.
    Should I go back to Flash 8?

    I have an old AlBook G4 1.67 2GB and I actually think CS3
    works great. There is a huge thread about this very issue going on
    at the moment so you might want to take a look there. I never had
    Flash 8, but MX04 also ran just fine on my laptop.
    As far as player performance, it has sped up a lot with AS3
    and Flash plugin 9. (Even if you publish AS2 for Flash 9!). I Don't
    know if there is true parity between the systems, but it is
    certainly faster.
    I've always thought it a good idea to develop on a Mac. If
    you can make your animations look smooth and good playing back in
    the Mac version of the player then you know they will look good
    across the board. I can't tell you how many sites (thankfully fewer
    these days) where I go and everything just crawls and chugs along.
    It is usually due to over high frame rates and excess transparency
    or animated raster images. (And I'm talking about the kind that
    even if it did move smoothly it wouldn't be worth it!)

  • This new version is annoying! It has crashed, had Flash issues and I'm not keen on the new interface. How do I go back to the previous version?

    I don't like the interface, the browser crashed first session and I'm having Flash issues. How can I uninstall this version and go back to the previous one?

    You can uninstall Firefox from your Control Panel (under Add & Remove Programs). When you uninstall, make sure that you DON'T choose the option "Remove my Firefox Personal Data".
    You can find the [http://www.squidoo.com/firefox-web-browser#module155179094 Older Versions of Firefox] (Windows and Mac versions) and accordingly download the one you want. However, please note that Firefox recommends using the latest version.
    Currently, the only older version that is being maintained by Firefox, in terms of security and safety, is Firefox 3.6.24.

Maybe you are looking for

  • When I close labview I get a Visual C++ runtime library error, how do I resolve this issue?

    I am using Labview 2012 (64 bits) on a Windows 7 OS. The error code is R6031 - Attempt to initalize the CRT more than once. This indicates a bug in your appilcation.

  • OBIEE 11g on Windows 7 (64 bit)

    Experts, I tried installing OBIEE 11.1.1.5 (both Simple and Software only install) mutiple times on my Laptop running Win 7 (64 bit), but all the times the installation hangs at "Creating domain", the first configuration step. Not sure what I'm doing

  • Works in Firefox but not in IE

    I have a webpage that when published looks exactly how I want it to in firefox but not in Internet Explorer. The problem is it shows the bulleted list in Firefox but not in IE. How can I fix this?

  • Ipad 4.generation retina display warming up.

    hi,i bought ipad4.generation retina display last week.the first few days without problem.I noticed that the iPad is now warming up .especially in the lower left side.i'm worried.I hope that is not the problem of device.My gratitude a little research

  • IE 11 security settings / Server 2012 domain joined server

    Can someone clarify how the Security settings are automatically managed on domain jointed computers in IE 11 / Server 2012 R2: There seem to be different settings depending on the IE Enhanced Security Settings. I particular if IE Enhanced Security Se