7941G Phone Screen Blank. Not able to Upgrade the Firmware

Hi All
I have Phone Cisco 7941G, iam try to upgrade i mess with that phone i believe, now screen is blank
I have followed the below steps :
1: Disconnect the computer from your Network and Connected to Different Switch, where Phone and PC Only connected to that  network
2: Phone and PC connected to Switch
3: Configure a static IP on the computer and disable any firewall.
3a: Use an IP of 10.10.10.1
3b: Use a Mask of 255.255.255.0
3c: Gateway and DNS can be left blank
4: Install and open TFTPd32 software
5: Click settings and modify the following:
5a: In the GLOBAL tab, uncheck everything except TFTP Server and DHCP Server
5b: In the TFTP tab, set a Base Directory to somewhere convenient ( where my files are located).
5c: In the TFTP tab, set TFTP Security to None
5d: in the DHCP tab uncheck all DHCP Options
6: Restart TFTPd32
7: Click on the settings tab and modify the following:
7a: In the DHCP tab, set IP pool starting address to 10.10.10.3, size of pool 2, mask 255.255.255.0, additional option 66 and 10.10.10.1 then click OK
8. Click on the Log viewer tab
9: Plug in the power of the phone and watch the logs.
I see below logs keep poping same logs.
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:26:99:45:8C:DA [23/12 13:28:26.724]
Previously allocated address 10.10.10.3 acked [23/12 13:28:26.724]
6512 Request 2 not processed [23/12 13:28:26.734]
Connection received from 10.10.10.3 on port 49152 [23/12 13:28:26.794]
Read request for file <term41.default.loads>. Mode octet [23/12 13:28:26.795]
Using local port 53590 [23/12 13:28:26.795]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:28:26.801]
Connection received from 10.10.10.3 on port 49153 [23/12 13:28:28.044]
Read request for file <term41.default.loads>. Mode octet [23/12 13:28:28.046]
Using local port 53591 [23/12 13:28:28.046]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:28:28.051]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:30:52.950]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:30:55.950]
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:26:99:45:8C:DA [23/12 13:31:21.618]
Previously allocated address 10.10.10.3 acked [23/12 13:31:21.618]
6512 Request 2 not processed [23/12 13:31:21.618]
Connection received from 10.10.10.3 on port 49152 [23/12 13:31:21.671]
Read request for file <term41.default.loads>. Mode octet [23/12 13:31:21.671]
Using local port 64619 [23/12 13:31:21.671]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:31:21.682]
Connection received from 10.10.10.3 on port 49153 [23/12 13:31:22.909]
Read request for file <term41.default.loads>. Mode octet [23/12 13:31:22.919]
Using local port 64623 [23/12 13:31:22.919]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:31:22.919]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:32:21.322]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:32:24.330]
Rcvd DHCP Rqst Msg for IP 0.0.0.0, Mac 00:26:99:45:8C:DA [23/12 13:34:15.567]
Previously allocated address 10.10.10.3 acked [23/12 13:34:15.567]
6512 Request 2 not processed [23/12 13:34:15.567]
Connection received from 10.10.10.3 on port 49152 [23/12 13:34:15.617]
Read request for file <term41.default.loads>. Mode octet [23/12 13:34:15.617]
Using local port 56662 [23/12 13:34:15.617]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:34:15.627]
Connection received from 10.10.10.3 on port 49153 [23/12 13:34:16.861]
Read request for file <term41.default.loads>. Mode octet [23/12 13:34:16.861]
Using local port 56663 [23/12 13:34:16.861]
<term41.default.loads>: sent 2 blks, 654 bytes in 0 s. 0 blk resent [23/12 13:34:16.871]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:34:46.280]
Rcvd DHCP inform Msg for IP 192.168.1.99, Mac 6C:88:14:7F:17:24 [23/12 13:34:49.283]
Rcvd DHCP Discover Msg for IP 0.0.0.0, Mac 38:AA:3C:51:02:85 [23/12 13:36:11.185]
Client requested address 0.0.0.98 [23/12 13:36:11.185]
DHCP: proposed address 10.10.10.4 [23/12 13:36:11.205]
My TFTP Folded have below files shown in the Image.
How can i make it work  from non-working phone to working phone..
any suggestions most welcome, tried last 2days but no results, googled many pages and read related article does not help me.

Hi
I do not know the old version of Cisco 7941G
I got one for testing myself for my LAB, Want to reset the Password, but I did Factory reset by keying 124567890*#
iam trying to Load 9.2X tried both SCCP and SIP, both iam getting the same error.
At the moment iam not going to use for any CME or CUCM, iam want to use for my SIP provider and my SIP Server.
Bandi

Similar Messages

  • I have a I-mac that is not able to upgrade the os past 10.7.5, when I go to upgrade Pages it says i have to be running os 10.10, how can I get Pages that will run with os 10.7.5.

    I have a I-mac that is not able to upgrade the os past 10.7.5, when I go to upgrade Pages it says i have to be running os 10.10, how can I get Pages that will run with os 10.7.5.

    Click here and follow the instructions. If they’re not applicable, buy an iWork 09 DVD from a source such as Amazon or eBay.
    (116937)

  • EAX splash screen only - not able to start the main menu Zen Xtra 3

    I have purchased this six months ago. Warranty expired. When I turned the mp3 player, the EAX logo appears but does not do anything. I tried to setup using the clip. But no luck. Any suggestions...
    Thanks

    Thanks, Guru.
    But I still have problem with loading the songs. It says the palyer is busy.
    I formated the hard disk and it does formats, it does cleanup and loads the OS on the the Zen. For a while,<EM> thought it could the hard dri've, but it does formats the dri've. What is the latest firmware for this player?. It takes long to appear the rescue mode after powering the player.</EM>
    <EM>Any idea ?</EM>
    <EM>Thanks</EM>
    <EM>Jay</EM>
    <EM></EM>

  • Phone screen will not change when turned

    Just recently the phone screen will not change direction whn the the phone is rotated. Any ideas?

    Double-tap the Home button to bring up the background applications. Then scroll to the left until you see a gray icon with a circular arrow -- that locks/ unlocks the screen orientation.

  • HT4623 HI, i am using I POD 3rd generatin with OS 3.1.3.  I am not able to update the new IOS and i could not found the update button in my POD.  Pleaese help me how do that.  regards

    Dear Friends,
    I am using IPOD touch 3rd generation with OS 3.1.3 (7E18) (Model MA623LL), i am not able to upgrade the IOS.  My IPOD does not have the software update button.
    Please help me how to upgrade the IOS for this version i could not able to download the games and new features.
    Please guide me.
    regards
    Nagaraju T
    [email protected]

    You iPod, model MA623LL , is a 1G iPod and those can only go to iOS 3.1.3
    Identifying iPod models

  • Iphone 4 screen not responding. not able to use the slider to unlock the phone

    Hi,
    I have a iphone 4 which was purchased in the UK 2 yrs back. I use this phone in india. Since today morning the screen has become unresponsive and i am not able to use the slider to unlock the screen to be able to make or recieve calls or perform any other fuction on my phone. I spoke to apple customer care in india about this problem and they suggested to try restoring the phone which didnt work out. Now they say that I will have to get this repaired in the UK since apple doesnt have apple stores and service centers in India. I think it is some hardware issue. I am not in a position to send it back to UK since i dont have any friends or relatives there in the UK nor i am traveling to the UK at this point in time. Pls help me out and suggest how can i get my phone replaced in India.
    Regards,
    Rajat

    Then go to Settings/General/Accessibility and turn Zoom to OFF.

  • HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIME

    HeLLO I AM USING AN IPHONE 5 From Last few days I DON'T KNOW WHAT HAPEND TO MY SET ITS DISTURBING ME A LOT DON'T KNOW WHY BUT I AM NOT ABLE TO UPGRADE ANY APPS BECAUSE WHEN I AM TRYING TO UPGRADE OR DOWNLOAD ANY APP THROUGH WIFI ND 3G BOTH AFTER SOMETIMES IT STOPS DOWNLOADING AND SHows THAT "UNABLE TO DOWNLOAD THIS APP" IT'S SHOWING THIS MESSAGE IN EVERY APP AND ALSO AT ITS DISTURBING ME AT THE TIME OF WATCHING ANY VIDEOS TOO. BECAUSE WHEN I AM TRYING TO WATCH ANY VIDEO IN YOUTUBE IT'S DISTURBING VIDEOS ARE NOT PLAYING ND SOUNDS ARE NOT COMING PROPERLY ND THE IMAGE QUALITY ALSO BECOMES POOR AND THE VIDEO STOPS AFTER SOME TIMES THIS PROBLEM IS HAPPENING AT ALL THE VIDEO ND IT'S HARASSING A LOT. THE SAME PROBLEM IS ALSO HAPPENING TO MY BROTHER'S PHONE TOO.. REQUEST TO APPLE PLEASE ANALYSE AND FIXED THE PROBLEM AS SOON AS POSSIBLE OR ELSE MAYB I NEED TO STOP USING APPLE PRODUCTS. CAUSE IT'S HARASSING MY DAILY LIFE A LOT....

    These are user to user forums.  You ARE NOT addressing Apple by posting here.
    Also, why are you YELLING at us??  Stop using ALL CAPS.
    What steps have you done to try and fix the problem?

  • I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

    I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
    Please suggest a solution or @Apple please get a software release which can remove this bug .

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • TS1702 I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3. However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via e

    I had deleted my Apps Icon from the phone as I was trying to update the new version iOS4.3.
    However, after deleteing the Icon, I am not able to install the Apps Messenger again because I am not able to use the IOS.4.3 diagnostic password sent via email.
    Installation was rejected because I need the iOS.4.3
    Thanks for your help
    Michael

    That situation went from inconvenient to complicated quickly.  Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled.  I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned.  Sorry this happened the way it did.  Definitely not efficient.

  • I am not able to change the object after upgrade(SPAU Activity).

    HI All,
    I am not able to change the object after upgrade(SPAU Activity). Please any one can tell what is the reason with below details.
    You are not authorized to make changes
    Message no. 37202
    Diagnosis
    You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
    There is also a second possibility:
    You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
    System Response
    Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
    Procedure
    Comsult your system administrator.
    Thanks in Advance,
    Mahesh Devershetty

    Hi,
    Does the user who would like to change the screen have the authorisation
    for S_DEVELOP in his profile? Please run transaction /NSU53 after the
    failed authorisation. You will get an information which authorisation
    is missing.
    Additional please check if you have open entries in transaction SPAU for
    that object.
    If you couldn´t solve the issue I need an user to analyse it in your
    development system.
    That user needs all authorisation for development and has to be
    registrated as developer.
    The system uses the authorization object S_DEVELOP for Workbench objects
    can you please check your user master record whether it contains the
    required autorization or not.
    Please also ensure that modification adjustment is turned on as per note:
    197600  Switching the Modification Assistant off and on
    Aidan

  • Not able to get the full screen in Youtube with latest firefox

    Hi All,
      I was using the FF 3.0.10 came with ArchLinux pacman. Recenty I downloaded the latest FF from mozilla website and put that in /opt/firefox. I am able to do all other things in it except watching the full screen flash video from Youtube. The browser stucks when I click on the full screen option. But that is working fine in the old browser ( Gran paradiso ). I am not able to find the root cause of it. An idea ?

    silvik wrote:launch firefox with: LD_PRELOAD=/usr/lib/libGL.so.1 firefox
    Yes that helped, thanks.
    But it only happened with youtube flash movies, others were able to go fullscreen.
    I got the following error messages in the console after the crash (cut off):
    LoadPlugin: failed to initialize shared library /home/andi/.mozilla/plugins/libmks.so [libexpat.so.0: cannot open shared object file: No such file or directory]                                                                           
    *** glibc detected *** firefox: munmap_chunk(): invalid pointer: 0xa8398020 ***                                                                                                                                                             
    ======= Backtrace: =========                                                                                                                                                                                                               
    /lib/libc.so.6[0xb7cbd281]                                                                                                                                                                                                                 
    /lib/libc.so.6[0xb7cbe4b5]                                                                                                                                                                                                                 
    /usr/lib/libGL.so.1[0xaa912205]                                                                                                                                                                                                             
    ======= Memory map: ========                                                                                                                                                                                                               
    08048000-0805a000 r-xp 00000000 08:02 136715     /usr/lib/firefox-3.5/firefox                                                                                                                                                               
    0805a000-0805b000 rwxp 00011000 08:02 136715     /usr/lib/firefox-3.5/firefox                                                                                                                                                               
    0805b000-0805c000 rwxp 00000000 00:00 0                                                                                                                                                                                                     
    a419b000-a4f06000 r-xp 00000000 08:02 176929     /usr/lib/libGLcore.so.185.18.14                                                                                                                                                           
    a4f06000-a50f3000 rwxp 00d6a000 08:02 176929     /usr/lib/libGLcore.so.185.18.14   

  • HT201272 I purchased an audiobook in Nov 2012 using iPhone 4S and then upgraded to iPhone 5 in Dec. Now I am not seeing the audio book in purchase history in iTunes. This means I am not able to get the book in my new iPhone. Please help

    I purchased an audiobook in Nov 2012 using iPhone 4S and then upgraded to iPhone 5 in Dec. Now I am not seeing the audio book in purchase history in iTunes. This means I am not able to get the book in my new iPhone. Please help.

    Audiobooks are currently a one-time only download from the store. If you don't have it on your computer (audiobooks go into the Books part of your iTunes library) nor on a backup, then if it's still in the store you can try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.

    Question
    If I do not select F11 ( full screen ) a big part of the screen "falls" of the right hand side of my monitor and is not readable, I am not able to find the neccesary adjustments.
    Screen 2/3 blanco on the left side
    With F11 all OK.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • I switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it

    i switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it  please advise

    You should be able to turn it off on the iPad by using 'a tap-to-select and then double-tap to activate/type process' and 3 fingered scrolling to go into Settings > General > Accessibility and turn it 'off' (so to use the 'slide to unlock' tap the slider and then double-tap it, and to type your passcode tap a digit and then double-tap it etc), or you can do it by connecting to your computer's iTunes : http://support.apple.com/kb/HT4064

  • I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

    I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

    You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.

Maybe you are looking for