7941G SCCP to SIP upgrade failure

I am trying to upgrade my SCCP 7941G to SIP. The original SCCP version is SCCP41.8-4-4S.
I used a tftpd32 as a server and expected the phone will pull firmware from the server. I hold the # key and rebooted the phone, the line 1 and line 2 button start blink, released the # keay and pressed 3491672850*#. But no file transfer happened.
Now the phone showed me a dark screen all the time.
The attachment is the firmware I used, tftpd32 settings, error messages from tftpd32.
The phone is struggling with the IP problems. MAC 00:21:55:55:5C:A0 is the phone's mac adress

Hi Aman,
Yes, I can't see any difference from the post except for the firmware. I have no idea how many files in the firmware. With the zip file I downloaded from Cisco website only 8 files exists. But I was suggested by others some more files needed for this.
The files I have for 7941 SIP firmware are
apps41.8-5-2TH1-9.sbn
cnu41.8-5-2TH1-9.sbn
cvm41.8-5-2TH1-9.sbn
dsp41.8-5-2TH1-9.sbn
jar41sip.41.8-5-2TH1-9.sbn
SIP41.8-5-2S.loads
term41.default.loads
term61.default.loads
OS79XX.txt
SEP002155555CA0.cnf.xml
XMDefault.cnf.xml
SIP002155555CA0.cnf
SIPDefault.cnf

Similar Messages

Upgrade 7975G from sccp to sip

Hey i need to upgrade a 7975G phone from sccp to sip. please advice on how to proceed.

I donot have access to CUCM or CME and i looked up a video on youtube that changed the image from sccp to sip on a 7960G.
The process to convert SCCP to SIP with the 79X0G is remotely possible. However, yes, it is possible to convert 7975G to SIP.
You need to configure DHCP Option 150. You will need the following files:
1. SEPmacaddress.cnf.xml - One of the lines here will specify the SIP version "adInformation70 model=”IP Phone 7975">SIP70.8-5-4S".
2. XMLDefault.cnf.xml - You will need a line like this:
SIP70.8-5-4S
3. Dialplan.xml - The easiest method is to use the following lines:

7941G stuck in firmware upgrade loop

I have a brand new 7941G phone that we attempted to change from SCCP to SIP for testing. We placed the contents of the firmware zip file into a tftp directory and pointed DHCP option 66 to that tftp server and started the upgrade process. The phone grabbed the term41.default.loads file serveral times over several reboots but now it appears to be stuck in a loop. It no longer tries to pull any files from the tftp server, it just sits with the upgrading screen and then occasionally reboots itself. It is getting an IP address, so that we know is working.
Any ideas?
Thanks

Alistair-
Thanks for the help. We managed to get the phone back on it's feet and loaded with a SIP image. I removed the 8.5.3 images fromt the tftp server and placed the 8.5.2SR1 and 8.5.2 images on the server instead.
However, when I power cylced the phone it still did not pull the new image (or any files for that matter). A previous poster said to take the phone off the voice vlan. I tried this thinking I was maybe handing some bad information on my voice vlan DHCP settings. The phone started to pull the new firmware once I moved it from the voice vlan.
I went back and checked my dhcp settings on the voice vlan and everything looked good. The phones must have some kinda feature or bug in the bootloader that if it gets the same IP address from a DHCP server it eventually stops trying to pull and image. Once the ip address changes, it tries again for some reason.

CCM v5.0 with ip phones running SCCP and SIP

Planning to migrate to CCM v5.0. Just would like to confirm CCM v5.0 can support to run SCCP and SIP phones simultaneously without any major issues. Does anyone has any experenice to setup this environment? Currently we are running 7960G and 7912G. Thanks.

Yes, it works. 100% guaranteed!
Linksys, Sipura, Grandstream IP phones work pretty fine with Cisco CCM 5

Mixed SCCP and SIP environment on UC560

Hi,
Is it possible to have a mixed SCCP and SIP enviroment on a UC560?
We would like to keep the current 7XXX series phones on SCCP and add a SIP conference station and door phone.
Thanks,
Neil

Hi Neil
Yes, this should work. As the UC560 runs CUCME, this should be fine.
HTH
Barry Hesk
Intrinsic Network Solutions

SIP to SIP Call Failures on CME to CME - sip-ua conflict/issue?

Hi,
I have two existing CME systems which I wish to allow internal calls between. These calls will go over an IPSec VPN. However the calls are failing.
Phones DN22xx - London CME 2801 - PIX505 --- Internet ---ASA5505 - India CME 2801 - Phones DN400x
I have configured dial peers on both CME's and the IPSec VPN. I can ping between both systems. The VPN allows traffic between the interface IP's of the CME systems only.
London CME (local SCCP phones 22xx):
interface FastEthernet0/0.100
encapsulation dot1Q 100 native
ip address 10.0.10.250 255.255.255.0
voice class codec 101
codec preference 1 g729r8
codec preference 2 g711ulaw
codec preference 3 g711alaw
dial-peer voice 25 voip
description *** SIP Peer to India ***
answer-address 400.
destination-pattern 400.
voice-class codec 101
session protocol sipv2
session target ipv4:192.168.15.10
incoming called-number 400.
no vad
India CME (Local SSCP phones 400x):
interface FastEthernet0/0
ip address 192.168.15.10 255.255.255.0
voice class codec 100
codec preference 1 g729r8
codec preference 2 g711ulaw
codec preference 3 g711alaw
dial-peer voice 10 voip
description *** SIP Peer to London UK ***
answer-address 22..
destination-pattern 22..
voice-class codec 100
session protocol sipv2
session target ipv4:10.0.10.250
incoming called-number 22..
no vad
The CME system at India also has an existing SIP dial peer to a service provider and has sip-ua configured (username, password, realm and registrar).
A call from India (4005) to London (DN2207) fails, the ccsip debug attached. I'm assuming its because the sip-ua configuration is being used for these calls to when I don't want it to be. The from field shows âFrom: <sip:[email protected]â when I need this to be the internal IP 192.168.15.10.
Can anyone offer any assistance with this?
Regards,
Chris

Hi,
thanks for your input however thats not the problem. 201.196.128.56 isn't an address on the router, it only has one IP and its 192.168.15.10.
The 201.196.128.56 address is the NAT'd address on the firewall. So that when a SIP call is made to the internet with sip-ua the from address is the public IP.
Chris

Is it possible to use SCCP and SIP at the same time?

Our CCM is using v9.1 and all of our phones are SCCP. We are looking at a conference room phone that runs SIP. Would it be possible to use this in our current setup?

Hi @bobdchambers,
That's totally fine. They both co-exist in the same environment but make sure to not configure the same extension in different models because if you dial an extension that is configured in a SCCP phone and a SIP phone, just the SCCP phone rings.
HTH.
Rgrds,
Martin, IT Specialist

Calendar upgrade failure, how can I reset the new calendar

Upgrading to the new v4 calendar on MobileMe has been a complete failure. Currently have a ticket open with Apple support, the upgrade failed with a "catastrophic failure message", my data was not fully transferred, etc.
I need to reset the new calendar, clear it completely, then reimport data from my v3 calendar from a backup to see if it will work. Any clues? There appears to be zero data on this.
Apple you really dropped the ball on quality control on this....

Launch Photos again, but hold down the alt/options key ⌥ while double clicking the Photos icon to launch the app. This will bring up the library chooser panel. select the library that you want to migrate to Photos.
After Photos completed the conversion, open the Preferences and select the new library as the main system library on the General tab of the Preferences.
Then you can delete the other migrated Photos library.

Upgrade failure(dbua) from 8i to 10g on solaris

Hi,
current version is 8.1.7.4 and trying to upgrade to 10.2.0.1 which is already been installed.
I am running dbua from 10ghome/bin
I have changed the oracle_home to 10g also
when I am trying to install by using dbua, after clicking on the finish button
it is getting failed by throwing the error at pre upgrade step.
ORA-0178: failure in processing system parameters while upgrading
Please assist me
Regards,
RB

Hi User,
It seems to me that you just want the upgrade done as fast as you could without really putting enough thoughts and understanding of the whole upgrade process. What metalink note are you following? Did you check the "Database Upgrade Guide"?
There are two scripts to run to check all your settings before the upgrade. Please search metalink for "upgrade" procedures for the details.
The errors you are encountering are mostly caused by obsolete parameters used in 8i or new parameters in 10g not acceptable in 8i.
Please provide error log.
Regards,
ArtRed

Upgrade failure, then restore failure, error code is 1604

IOS 5.01 upgrade to IOS 5.1 failure and can't restart, then restore failure and the error code is 1604

Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

Upgrade failure

Hi experts,
I am deploying a new WSA, but seem unable to upgrade AsyncOS - when I check for available upgrades, I receive the following error:
Error
Failure downloading upgrade list.
Everything else seems to be OK - I have time via the default NTP servers, checks for new feature keys return a success, policy trace returns what I would expect.
I have noticed that the feature keys the client purchased are listed as Active with 30 days remaining and an expiration date of Dormant.
Does the appliance license need to be activated? I can't seem to locate a Claim Certificate to find the PAK...
Thanks.

Hi,
The status Dormant means that the feature is currently not being used by the Device e.g as the HTTPS Proxy status shows Dormant this generally means that the device is currently not using this feature.
Regarding the Upgrade issue, I would request you to make sure the following ports are not being blocked by the firewall:
Firewall Ports:
Port         Protocol        In/Out Hostname use       Description
===============================================
20/21      TCP              In or out   AsyncOS IPs     FTP server FTP for aggregation of
log files.
22           TCP              In            AsyncOS IPs     SSH access to the CLI,
aggregation of log files.
22           TCP              Out          SCP server        SCP push to log server.
23           Telnet           In            AsyncOS IPs     Telnet access to the CLI.
23           Telnet           Out          Telnet server    Telnet upgrades.
25           TCP              Out          Any SMTP to send email.
25           TCP              In            AsyncOS IPs       SMTP to receive bounced
email or if injecting email from outside firewall.
80           TCP              In or out AsyncOS IPs,downloads.ironport.com   HTTP access
to the GUI for system monitoring. AsyncOS and Sophos upgrades are retrieved via HTTP from
port 80.
82           HTTP            In             AsyncOS IPs        Used for viewing the
IronPort Spam Quarantine.
83           HTTPS          In             AsyncOS IPs       Used for viewing the IronPort
Spam Quarantine.
53           UDP/TCP       Out           DNS servers        DNS if configured to use
Internet root servers or other DNS servers outside the firewall. Also for SenderBase
110         TCP              Out            POP server        POP authentication for end
users for IronPort Spam Quarantine.
123         UDP              Out            NTP server        NTP if time servers are
outside firewall.
143         TCP              Out            IMAP server       IMAP authentication for end
users for IronPort Spam Quarantine.
161         UDP              In              AsyncOS IPs      SNMP queries.
162         UDP              Out            Management station SNMP traps.
389 or 3268       LDAP   Out            LDAP servers      LDAP if LDAP directory servers
are outside firewall. LDAP authentication for IronPort Spam Quarantine.
636 or 3269       LDAPS Out           LDAPS               LDAPS ActiveDirectory's global
catalog server.
443         TCP               In             AsyncOS IPs       Secure HTTP (https) access
to the GUI for system monitoring.
443         TCP               Out           update manifests, ironport.com -Verify the
latest files for the update server.
443         TCP               Out           phonehome.senderbase.org - Receive/send Virus
Outbreak Filters.
514         UDP/TCP        Out           Syslog server       Syslog logging.
2222       CCS               In/Out       AsyncOS IPs        Cluster Communication Service
(for centralized management).
6025       TCP               In/Out       AsyncOS IPs        Send IronPort Spam Quarantine
data to the Security Management appliance if the external IronPort Spam Quarantine is
enabled.
If it still fails, please try to use the recommended P1 interface and then try to do the upgrade.
Regards,
Kush

Ism-cue upgrade failure

Hi Pro,
When I tried to upgrade from 8.5.1 to 8.6.1, I got the following failure. Has anybody come across this?
The documentation only shows download the file with .pkg extension. What other files in the Unity Express Complete Installation File Set do I need to install?
Would you like to continue?[confirm]
Downloading ftp cue-vm-k9.SPA.sme.8.6.1.pkg
Bytes downloaded : 687017
Validating package signature ... done
Validating installed manifests ............complete.
- Parsing package manifest files... complete.
- Checking Package dependencies... complete.
Downloading ftp cue-vm-langpack.sme.8.6.1.pkg
Bytes downloaded : 3986036
Validating package signature ... done
- Parsing package manifest files... complete.
- Checking Package dependencies... complete.
- Checking Manifest dependencies for subsystems in the install candidate list...
- Checking Manifest dependencies for subsystems already installed...
Error: Required Subsystem ID e2497725-368d-48b5-a7d5-7f87d889a608 was not found either on Installed or Candidate list.
Thanks in advance.

Hi take a look at this:
Symptom: Software upgrade of CUE fails with the following error message: Error: Required Subsystem ID e2497725-368d-48b5-a7d5-7f87d889a608 was not found either on Installed or Candidate list.
Conditions:
1) CUE was shipped from Cisco with version 7.0.1 or later.
2) One of the following upgrades is done:
•7.0.x -> 7.1.x
•7.1.x -> 8.0.x
•7.0.x -> 8.0.x.
Workaround: The workaround is to first remove a dummy subsystem using the following CLI command in exec mode, allow the system to reboot, and then do the upgrade: "software uninstall uid-list 26bd663c-3e5a-43d9-a6c3-5441ce44941b".
Gabriel.

Impossible to start the desktop environment after upgrade failure

Hello, after a long time without doing upgrades on my archlinux, I tried it once today. The upgrade failed, there were some packages conflit. Then nautilus and terminal were unable to be launched, so I restarted my PC. But when it's supposed to display the login window, the screen became black with a little clock instead of the mouse point.
Anyone can tell me how can I recovery my desktop environnement please?
If it isn't possible, how can I copy my data on a USB disk?
Thank you.

First question, is the gdm daemon in your rc.conf or your inittab?
If it is in the inittab, then append the number 3 to the end of the grub kernel init string. This will boot to runlevel 3, and leave you in a text console.
If it is in rc.conf...well, if you can Ctrl+Alt+Bkspc out of the X session with the little clock, then just run from the console, then that's easy. Otherwise switch to another console (Ctrl+Alt+F1) and log in, then try doing
killall gdm
As a last resort, you can always boot to single user by putting 1 at the end of the grub init string instead of 3.
After you are in the console, then try doing xinit /usr/bin/gnome-session and see if it works. If not, then you can try rolling back packages and whatnot.
Also, check /var/log/pacman.log and paste the failures you got.

ITunes 8.1 for Windows Upgrade Failure

Upgraded from iTunes v8.0.1.11 to v8.1.0.52. Installation went fine, rebooted machine and experienced failure on iTunes startup with an invalid Library reference. Tried to uninstall new version and reinstall previous. Again it failed due to a newer format of "iTunes Library.itl" file. Followed support recommendation to delete file, move XML counterpart to desktop to import and recreate, but doesn't work, itunes crashes with error before I have an opportunity to fix.
Any suggestions?
Attached is error signature for the 8.1 release:
AppName: itunes.exe AppVer: 8.1.0.52 ModName: itunes.exe
ModVer: 8.1.0.52 Offset: 00568498

Upgraded from iTunes v8.0.1.11 to v8.1.0.52. Installation went fine, rebooted machine and experienced failure on iTunes startup with an invalid Library reference. Tried to uninstall new version and reinstall previous. Again it failed due to a newer format of "iTunes Library.itl" file. Followed support recommendation to delete file, move XML counterpart to desktop to import and recreate, but doesn't work, itunes crashes with error before I have an opportunity to fix.
Any suggestions?
Attached is error signature for the 8.1 release:
AppName: itunes.exe AppVer: 8.1.0.52 ModName: itunes.exe
ModVer: 8.1.0.52 Offset: 00568498

Cisco B22HP Fabric Extender F/W upgrade failure

Please see attachement to see what happened to the Cisco B22HP Fabric Extder after a F/W upgrade was attempted showing the failure.

Hi,
Did you try to unconfigure/reconfigure your FEX ?
Did you try to downgrade/upgrade again the switch ?
Regards

7941G SCCP to SIP upgrade failure

Similar Messages

Maybe you are looking for