7961 answering on speakerphone when call answered by CUEAC.

We have recently installed CUEAC 3.1.1.5 and it is set to use the handset.  When the operator answers the call, the phone rings once and the call goes directly to speakerphone.  When we call the phone directly it does not get answered on the speakerphone.  How can we stop this calls from being answered automatically on the speakerphone?

check the preferance on the AC client.  There should be something that states what the operator can use.  Headset, speaker or handset.  If its locked out, then you have to adjust at the AC Server

Similar Messages

  • When calling someone it is dead silent until they answer, it doesnt ring.

    when calling someone it is dead silent until they answer, it doesnt ring.

    This requires more details like below:
    CUCM version / phone models involved
    Type of gateway / trunk / running config of gateway
    Exact call flow
    Was it working fine earlier / any changes after which it broke?
    A debug + ccm trace for a test call with call details.
    HTH
    Manish

  • E71 hangs when call answered

    Hi Nokians,
    A moment ago, when I click "green" key to answer a call, my E71 hangs (No backgroud application is running)
    E71 is a great device but as days go by, more and more issue happened (refer below).
    I cannot accept a phone that hangs when answering a call. It does not improve my productivity at all. My previous Treo 680 had the same problem, that is why I switched to E61i, and now E71.
    To Nokia: you better improve! Cause E71 may be my last phone from Nokia.
    List of bugs
    1. Active Notes does not appear when call is make to the linked contact
    2. GPS not able to lock to satellite, and display current location on map (solved by changing the positioning server to supl.nokia.com)
    3. I connect to the email account and retrieve emails, the application shut down and returns to the home screen.
    4. I have 2 e-mail mailboxes, the 2nd mailbox disappeared when auto-retrieval is turned on, all e-mails are lost!
    5. Unable to terminate/hang-up when called number is busy (partially solved if automatic redial is diabled) or when an incoming call ends.
    6. When set powersaver to "None", when the screen goes to power save mode, it display a time. The time stops at that moment. And will no tick at all.
    7. Automatic Retrieval > E-Mail notifications > only in home network . When I open an incoming SMS, a warning message appeared, "Messaging: Memeory Full. Close some applications and try again." . I checked my phone's memory, it has 95MB free memory. I need to disable E-mail notifications, then only I am able to open an incoming SMS.
    8. The recent call list (in, out and missed) shows all icons as "mobile" despite the number is a telephone number.
    9. I am not able to enable both
    - Automatic retrieval > E-mail notifications
    - Automatic retrieval > E-mail retrieval
    E71 only allows either one of the above to be enabled
    10. Sometimes, E71 will hang when answering a call.
    200.21.118
    27-11-2008
    RM346
    NOKIA E71-1(26)
    Message Edited by mecool2008 on 11-Feb-2009 10:16 PM

    Hi,
    I am also facing some of the problems you have listed.
    My frined has Nokia E71 but with older FM 100..... He do not have much problems.
    Nokia has to fix these problems at the earliest.
    bye,
    raj707
    Mumbai - India
    =====
    200.21.118
    E71-1
    RM-346
    =====

  • HT201436 I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

    I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

    Voicemail is a carrier feature, not a phone feature. This has to be fixed by your carrier, so contact them, as obviously, voicemail is not properly provisioned on your account.

  • I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4.  However, I cannot record voice memos with my Bluetooth mic.

    I can record voice memos fine using the built-in iPhone 4 mic.  And my Bluetooth headset (Jawbone Era) works fine when I leave messages on voice mail systems etc. when calling on the iPhone 4, so it appears my headset mic is fine.  I can also use voice activated dialing, although it fails miserably interpreting numbers.  However, I cannot record voice memos with my Bluetooth mic.   I just get barely audible static.  Any suggestions?   Thanks.

    Hello, did you ever get an answer to your question? I just picked up a Jawbone Era and using on an iPhone 4s running 5.0.1. Seems to work fine on regular calls, but not on the built in Voice memos application. It worked fine on my older Jawbone Icon, but haven't tested on the 4s or iOS 5.
    Thanks!

  • Open front panel of sub vi when called - how?

    Hello,
    I have a VI with several sub VIs.
    I want some of the sub VI front panels to be opened, if they are not yet opened and if they are called but I want them to stay in the background.
    There are two SubVI Node setups: "Open Front Panel when loaded" and "show front panel when called"
    Both are not what I want. If I select "show front panel when called", then the front panels are opened but flickering because they are called often and alternately.  
    Greetings Johannes
    Using LabVIEW 7.1 and 2009 recently
    Solved!
    Go to Solution.

    johanneshoer wrote:
    No, no issue with my code :-)
    Yeah, we've heard that one before...
    @smercurio_fc: With your example I can see if a subVI is opened or not, but how can I open the subVI during run time if it is not opened
    Just call the method with it set to "write" (right-click and select "Change to Write"). I don't recall if LV 7.0 has a Front Panelpen method. Check the LabVIEW manual.

  • Stored Procedure Does Not Run Properly When Called From Portlet

    We have a simple Java portlet that calls a PL/SQL stored procedure which we wrote. The stored procedure sends a large number of emails to users in our corporation using the "utl_smtp" package. The stored procedure returns a count of the emails back to the Java portlet when it's finished. This number is displayed in the portlet.
    Our problem:
    The stored procedure functions as expected when run from a PL/SQL block in SQL*Plus, and the Java portlet calls the procedure properly when sending out a smaller number of emails (Less than 200 usually). When we get into a higher number of emails the procedure hangs when called from the portlet, but it STILL functions properly from SQL*Plus. It does not return the number of emails sent
    and the Java portlet is unable to return a SQLException. Also, we have noticed that emails are sent at a much slower pace from the stored procedure when it's called from the portlet.

    Any Ideas?

  • Report runs OK through concurrent program, but not when called through URL

    We have a custom 6i report developed that works successfully 100% of the time when run through a concurrent program.
    We are now attempting to integrate this into an OAF application. To do this, we build the necessary call to the reports server by reading different profile options, etc and come up with a URL like this:
    http://ebsd777.xxxxx.com:8000/dev60cgi/rwcgi60?d777_APPS+report=XXMFG_ESPEC_REPORT.rdf+P_SPEC_ID=43+DESFORMAT=PDF
    This report works 90% of the time when called like this, but the other 10%, we get the following error:
    "Error: The requested URL was not found, or cannot be served at this time.
    Incorrect usage."
    Trying to find what the differences are between the reports that work and those that don't - found that reports which fail seem to extend out further to the right than the reports that do work. But, these reports still fit on standard letter paper in landscape format - as we can verify through the concurrent program call.
    Is there some sort of report server setting or parameter which we can change to get this to work when called through the reports server URL?
    Any thoughts would be appreciated!
    Thanks,
    Craig

    Hi,
    Please post the application release along with the database version and OS.
    But when i call the same program through the pl/sql executable of another concurrent program , it does not print the pdf output by defaultHow do you call the program? What is the value of the number of copies profile option?
    Please see if these docs help.
    Note: 757901.1 - How To Restrict The Number Of Copies To 1?
    Note: 729117.1 - How To Specify the Number of Copies to Print by Report?
    Thanks,
    Hussein

  • Error "Job already started" when calling a adobe form in Z function module

    Hi All,
    I have a error when calling a adobe form in a custom function module.
    I am using FP_FUNCTION_MODULE_NAME to get the adobe form function module and then i am using FP_JOB_OPEN function module to control the printing parameters such as no print preview or no dialog ..etc.. I dont have any exceptions during the call of FP_JOB_OPEN function module ..
    Later I am calling my function module which was generated for the adobe form and i am getting the error called " JOB ALREADY STARTED".
    I tried executing the same function module in se37 and the PDF form output was generated, and also by commenting FP_JOB_OPEN function module the PDF form output was generated.
    But i need the FP_JOB_OPEN function module to control the output based on the output type which triggers the form output such as the medium from nast record which says print or email or fax.. etc
    Please let me know how to handling this error.

    Just as a followup note. If you are testing a function module from SE37 and the test button you will get a value in SY-CPROG. You must override this value for everything to work.
    If you override the value of SY-CPROG with the main program that will be calling the function module you have no problem.
    John W.

  • Getting   FRM-41029   when calling report from form

    Hi
    I have following procedure to run the report but its running fine but giving error FRM-41029 when calling the report from the form.
    runrep('MATREP,'REPSER','PDF','F:\rec\RepEnt.RDF');
    Repid := FIND_REPORT_OBJECT(repobj);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE, RUNTIME);
    set_report_object_property(repid, REPORT_SERVER, repserv);
    set_report_object_property(repid, REPORT_COMM_MODE, SYNCHRONOUS);
    set_report_object_property(repid, REPORT_DESTYPE,'file');
    set_report_object_property(repid, REPORT_DESFORMAT,repfor);
    set_report_object_property(repid, REPORT_FILENAME,repfile);
    rgds
    soumya

    hi
    try something like this.
    PROCEDURE sarah ( p_report_name varchar2, vParamValue number ) is
    l_param_list  paramlist;
    l_rep_id      report_object;
    l_rep_job     varchar2(100);
    l_rep_status  varchar(100);
    BEGIN
    l_param_list := Get_parameter_List('tmp');
    IF NOT Id_Null(l_param_list ) THEN
    Destroy_parameter_List( l_param_list );
    END IF;
    l_param_list := Create_parameter_List('tmp');
    add_parameter(l_param_list ,'p_num',text_parameter,to_char( vParamValue ));
    l_rep_id := FIND_REPORT_OBJECT( p_report_name );
    if
         id_null ( l_rep_id )
    then
      msg ( 'There is no Report ' || p_report_name || ' in form ' || name_in ( 'system.current_form' ) );
      raise form_trigger_failure;
    end if;
    SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_COMM_MODE,SYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_DESTYPE,cache);
    SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_DESFORMAT,'PDF');
    SET_REPORT_OBJECT_PROPERTY(l_rep_id, REPORT_OTHER, 'paramform=no');
    l_rep_job := RUN_REPORT_OBJECT( l_rep_id, l_param_list );
    l_rep_status := REPORT_OBJECT_STATUS( l_rep_job );
    WHILE l_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
    LOOP
    l_rep_status := report_object_status( l_rep_job );
    END LOOP;
    WEB.SHOW_DOCUMENT('http://sarah:8889/reports/rwservlet/getjobid'||substr(l_rep_job,instr(l_rep_job,'_',-1)+1) || '?server=repserver', '_blank');
    END; then u may call the procedure something like this.
    when-button-pressed trigger.
    begin
    sarah ('REPORT6', :block.item );
    end;sarah
    Edited by: S@R@h on Nov 30, 2009 9:39 PM

  • How long can be URL in Go to URL when calling SSRS report?

    Hi
    I am facing issues when calling a report using go to URL. I have 6 cascading multiple value parameter in one of my report and from this I am calling another report by passing all these parameters using java script in go to URL option. Since I am passing
    all these multiple value parameter my report URL is exceeding up to 5000 to 7000 characters long. This is not working at all as max characters in URL are allowed to be 2048.
    Is there any work around to pass all these multiple value parameter using go to URL option?
    I thought of using Go to report instead but our business is not allowing to this.
    Thanks!
    Bhushan

    Hi Bhushan,
    As you may know, Microsoft Internet Explorer has a maximum uniform resource locator (URL) length of 2,083 characters. Internet Explorer also has a maximum path length of 2,048 characters. This limit applies to both POST request and GET request URLs.
    For more details, please see:
    Maximum URL length is 2,083 characters in Internet Explorer
    I am afraid it is a limitation in IE, so I would suggest you ask the questions to IE forum:
    http://social.technet.microsoft.com/Forums/ie/en-US/home?category=internetexplorer threads to seek further assistance. There are many IE experts who may help workaround the limitation.
    Thank you for your understanding.
    Regards,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Is it possible to step into a CVI dll when called by TestStand?

    As the question says: "Is it possible to step into a CVI dll when called by TestStand?"
    I am sure Ray F. may have a few tricks up his sleeves...  Hope you see this post, Ray!
    I compiled a dll using CVI.  The dll is called as a test by TestStand.
    I do have an "exe" version of the code that I use for debug with a testbed, but the behaviour is not the same as testing the actual target while running TestStand.  My goal is to get as close as possible to the real events.
    Thanks,
    JLV

    Sorry about that,
    There are two ways as I was saying:
    1. You can configure the CVI adapter to Execute Steps in a External Instance of CVI (requires CVI 6.0 or greater).
    Only go to Configure->Adapters and select the LabWindows CVI adapter and click on configure and select the corresponding option.
    After that set a break point in the step that you want to debug.
    An external instance of CVI will be launched where you can set break points and step into the code.
    2. From CVI Specifying an external process:
    In CVI go to Run Specify External Process and enter the seqEdit.exe as the program name (you have to browse to the location <TestStand>\Bin\SeqEdit.exe).
    As the argument you enter the name of the sequence file you want to debug.
    Now just select Run->Debug SeqEdit.Exe
    The Sequence Edtior will be launched and you can set break point in your CVI code and step into it when the step is executed.
    Check the Using LabWindows/CVI with TestStand reference manual for more information.
    I hope it helps you to get started.
    Regards.

  • Error when call RFC Function module in R/3

    Dear All,
    We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
    we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
    This is the first time we are doing this configuration.
    Could you please let me know what woulbe the reason.

    read the original message
    We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
    I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

  • Error when calling to an screenflow in a process deployed in Websphere

    Hi all,
    Environment: Solaris SunOS 5.10 (Generic January 2005), Websphere 6.1.0.13, JVM: 1.5.0_07
    Product: AquaLogic BPM 6.0.2 for WebSphere
    We are testing our environment with a very simple process with only one interactive activity that is associated to an screenflow that has a presentation of a BPM Object. We have tested this process in Studion 6.0.2 and Enterprise StandAlone 6.0.2 and the activity associated with the screenflow runs OK, but when we test it in Enterprise 6.0.2 for Websphere it crashes when calling this activity. This is the exception:
    Task failed.
    Debido a: Task '0' in activity '/ProcesoTestSF#Default-1.0/Interactive[Interactiva]' for instance '/ProcesoTestSF#Default-1.0/110/0' could not be successfully executed. The task failed while executing method 'interactivaInteractivaIN'.
    Debido a: The task could not be successfully executed.
    Reason: 'java.lang.NoClassDefFoundError: xobject/Fuego__AutoGen__Screenflows__/__FlujoDePantalla'.
    Debido a: xobject/Fuego__AutoGen__Screenflows__/__FlujoDePantalla
    fuego.web.exception.WapiTaskFailedException: Task failed.
    at fuego.web.exception.WapiExceptionFactory.create(WapiExceptionFactory.java:209)
    at fuego.web.papi.DefaultErrorHandler.handleException(DefaultErrorHandler.java:49)
    at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:127)
    at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
    at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:228)
    at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:219)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:58)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:989)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:930)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
    at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
    at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
    at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
    at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
    at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
    at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
    at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:766)
    at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:674)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:498)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:464)
    at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
    at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
    at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1455)
    at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:113)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:454)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:383)
    at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
    at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
    at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
    at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
    at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
    at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:195)
    at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:743)
    at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:873)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)
    Caused by: fuego.papi.exception.TaskFailedException: Task '0' in activity '/ProcesoTestSF#Default-1.0/Interactive[Interactiva]' for instance '/ProcesoTestSF#Default-1.0/110/0' could not be successfully executed. The task failed while executing method 'interactivaInteractivaIN'.
    at fuego.papi.exception.TaskFailedException.create(TaskFailedException.java:57)
    at fuego.server.AbstractProcessBean.createTaskFailedException(AbstractProcessBean.java:3319)
    at fuego.server.AbstractProcessBean.runTask(AbstractProcessBean.java:2947)
    at fuego.ejbengine.EJBProcessControlAdapter.runTask(EJBProcessControlAdapter.java:457)
    at fuego.papi.impl.j2ee.EJSRemoteStatelessEJBProcessControl_ac6abeae.runTask(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.ibm.rmi.util.ProxyUtil$4.run(ProxyUtil.java:727)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.ibm.rmi.util.ProxyUtil.invokeWithClassLoaders(ProxyUtil.java:725)
    at com.ibm.CORBA.iiop.ClientDelegate.invoke(ClientDelegate.java:1123)
    at $Proxy44.runTask(Unknown Source)
    at fuego.papi.impl.j2ee._EJBProcessControlInterface_Stub.runTask(_EJBProcessControlInterface_Stub.java:3934)
    at fuego.papi.impl.j2ee.EJBProcessControlInterfaceWrapper.runTask(EJBProcessControlInterfaceWrapper.java:2169)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
    at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:116)
    at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:70)
    at $Proxy43.runTask(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
    at fuego.lang.JavaObject.invoke(JavaObject.java:227)
    at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:189)
    at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
    at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
    at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
    at fuego.web.papi.TaskExecutor.runInstanceTask(TaskExecutor.java:490)
    at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:98)
    ... 37 more
    Caused by: fuego.lang.ComponentExecutionException: The task could not be successfully executed.
    Reason: 'java.lang.NoClassDefFoundError: xobject/Fuego__AutoGen__Screenflows__/__FlujoDePantalla'.
    at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:992)
    at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1167)
    at fuego.server.execution.TaskExecution.invoke(TaskExecution.java:428)
    at fuego.server.execution.InteractiveNormalCilExecution.invoke(InteractiveNormalCilExecution.java:430)
    at fuego.server.execution.TaskExecution.executeCIL(TaskExecution.java:553)
    at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:737)
    at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:697)
    at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:178)
    at fuego.server.execution.microactivity.InteractiveMicroActivity.executeNormalCil(InteractiveMicroActivity.java:489)
    at fuego.server.execution.microactivity.InteractiveMicroActivity.executeItem(InteractiveMicroActivity.java:442)
    at fuego.server.execution.microactivity.InteractiveMicroActivity.execute(InteractiveMicroActivity.java:99)
    at fuego.server.AbstractProcessBean$45.execute(AbstractProcessBean.java:2938)
    at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:302)
    at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
    at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
    at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
    at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
    at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
    at fuego.server.AbstractProcessBean.runTask(AbstractProcessBean.java:2942)
    ... 70 more
    Caused by: java.lang.NoClassDefFoundError: xobject/Fuego__AutoGen__Screenflows__/__FlujoDePantalla
    at bea.ProcesoTestSF.Default_1_0.Instance.CIL_interactivaInteractivaIN(Instance.xcdl)
    at bea.ProcesoTestSF.Default_1_0.Instance.CIL_interactivaInteractivaIN(Instance.xcdl)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:983)
    ... 88 more
    Any help would be appreciated
    Thank you very much

    Rubén,
    It has a problem with the loading of the object classes.
    Try to export the full process (so don't use "publish for enterprise");
    perhaps it will work then.
    Best Regards,
    Frank van den Nieuwboer
    Hi all,
    Environment: Solaris SunOS 5.10 (Generic January 2005), Websphere 6.1.0.13, JVM: 1.5.0_07
    Product: AquaLogic BPM 6.0.2 for WebSphere
    We are testing our environment with a very simple process with only one interactive activity that is associated to an screenflow that has a presentation of a BPM Object. We have tested this process in Studion 6.0.2 and Enterprise StandAlone 6.0.2 and the activity associated with the screenflow runs OK, but when we test it in Enterprise 6.0.2 for Websphere it crashes when calling this activity. This is the exception:
    Task failed.
    Debido a: Task '0' in activity '/ProcesoTestSF#Default-1.0/Interactive[Interactiva]' for instance '/ProcesoTestSF#Default-1.0/110/0' could not be successfully executed. The task failed while executing method 'interactivaInteractivaIN'.
    Debido a: The task could not be successfully executed.
    Reason: 'java.lang.NoClassDefFoundError: xobject/Fuego__AutoGen__Screenflows__/__FlujoDePantalla'.
    Debido a: xobject/Fuego__AutoGen__Screenflows__/__FlujoDePantalla
    fuego.web.exception.WapiTaskFailedException: Task failed.
    at fuego.web.exception.WapiExceptionFactory.create(WapiExceptionFactory.java:209)
    at fuego.web.papi.DefaultErrorHandler.handleException(DefaultErrorHandler.java:49)
    at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:127)
    at fuego.workspace.servlet.ExecutorServlet.doAction(ExecutorServlet.java:117)
    at fuego.workspace.servlet.BaseServlet.doPost(BaseServlet.java:228)
    at fuego.workspace.servlet.BaseServlet.doGet(BaseServlet.java:219)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at fuego.workspace.servlet.AuthenticatedServlet.service(AuthenticatedServlet.java:58)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:989)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:930)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:145)
    at fuego.web.filter.SingleThreadPerSessionFilter.doFilter(SingleThreadPerSessionFilter.java:64)
    at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
    at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
    at fuego.web.filter.CharsetFilter.doFilter(CharsetFilter.java:48)
    at fuego.web.filter.BaseFilter.doFilter(BaseFilter.java:63)
    at com.ibm.ws.webcontainer.filter.FilterInstanceWrapper.doFilter(FilterInstanceWrapper.java:190)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:130)
    at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
    at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:766)
    at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:674)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:498)
    at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:464)
    at com.ibm.ws.webcontainer.servlet.CacheServletWrapper.handleRequest(CacheServletWrapper.java:90)
    at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:744)
    at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1455)
    at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:113)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:454)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:383)
    at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
    at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
    at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
    at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
    at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
    at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:195)
    at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:743)
    at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:873)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)
    Caused by: fuego.papi.exception.TaskFailedException: Task '0' in activity '/ProcesoTestSF#Default-1.0/Interactive[Interactiva]' for instance '/ProcesoTestSF#Default-1.0/110/0' could not be successfully executed. The task failed while executing method 'interactivaInteractivaIN'.
    at fuego.papi.exception.TaskFailedException.create(TaskFailedException.java:57)
    at fuego.server.AbstractProcessBean.createTaskFailedException(AbstractProcessBean.java:3319)
    at fuego.server.AbstractProcessBean.runTask(AbstractProcessBean.java:2947)
    at fuego.ejbengine.EJBProcessControlAdapter.runTask(EJBProcessControlAdapter.java:457)
    at fuego.papi.impl.j2ee.EJSRemoteStatelessEJBProcessControl_ac6abeae.runTask(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at com.ibm.rmi.util.ProxyUtil$4.run(ProxyUtil.java:727)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.ibm.rmi.util.ProxyUtil.invokeWithClassLoaders(ProxyUtil.java:725)
    at com.ibm.CORBA.iiop.ClientDelegate.invoke(ClientDelegate.java:1123)
    at $Proxy44.runTask(Unknown Source)
    at fuego.papi.impl.j2ee._EJBProcessControlInterface_Stub.runTask(_EJBProcessControlInterface_Stub.java:3934)
    at fuego.papi.impl.j2ee.EJBProcessControlInterfaceWrapper.runTask(EJBProcessControlInterfaceWrapper.java:2169)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at fuego.papi.impl.AbstractProcessControlHandler.invokeInternal(AbstractProcessControlHandler.java:72)
    at fuego.papi.impl.j2ee.EJBProcessControlHandler.doInvoke(EJBProcessControlHandler.java:116)
    at fuego.papi.impl.j2ee.EJBProcessControlHandler.invoke(EJBProcessControlHandler.java:70)
    at $Proxy43.runTask(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
    at fuego.lang.JavaObject.invoke(JavaObject.java:227)
    at fuego.papi.impl.j2ee.EJBExecution.next(EJBExecution.java:189)
    at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:177)
    at fuego.web.execution.impl.WebInteractiveExecution.process(WebInteractiveExecution.java:54)
    at fuego.web.execution.InteractiveExecution.process(InteractiveExecution.java:223)
    at fuego.web.papi.TaskExecutor.runInstanceTask(TaskExecutor.java:490)
    at fuego.web.papi.TaskExecutor.execute(TaskExecutor.java:98)
    ... 37 more
    Caused by: fuego.lang.ComponentExecutionException: The task could not be successfully executed.
    Reason: 'java.lang.NoClassDefFoundError: xobject/Fuego__AutoGen__Screenflows__/__FlujoDePantalla'.
    at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:992)
    at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1167)
    at fuego.server.execution.TaskExecution.invoke(TaskExecution.java:428)
    at fuego.server.execution.InteractiveNormalCilExecution.invoke(InteractiveNormalCilExecution.java:430)
    at fuego.server.execution.TaskExecution.executeCIL(TaskExecution.java:553)
    at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:737)
    at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:697)
    at fuego.server.execution.TaskExecution.executeTask(TaskExecution.java:178)
    at fuego.server.execution.microactivity.InteractiveMicroActivity.executeNormalCil(InteractiveMicroActivity.java:489)
    at fuego.server.execution.microactivity.InteractiveMicroActivity.executeItem(InteractiveMicroActivity.java:442)
    at fuego.server.execution.microactivity.InteractiveMicroActivity.execute(InteractiveMicroActivity.java:99)
    at fuego.server.AbstractProcessBean$45.execute(AbstractProcessBean.java:2938)
    at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:302)
    at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
    at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
    at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
    at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
    at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
    at fuego.server.AbstractProcessBean.runTask(AbstractProcessBean.java:2942)
    ... 70 more
    Caused by: java.lang.NoClassDefFoundError: xobject/Fuego__AutoGen__Screenflows__/__FlujoDePantalla
    at bea.ProcesoTestSF.Default_1_0.Instance.CIL_interactivaInteractivaIN(Instance.xcdl)
    at bea.ProcesoTestSF.Default_1_0.Instance.CIL_interactivaInteractivaIN(Instance.xcdl)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:585)
    at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:983)
    ... 88 more
    Any help would be appreciated
    Thank you very much

  • Error when calling a Webservice's public method in Forms10g

    Hi,
    I'm getting the following error when calling a webservice's public method, i'm using Forms10g 10.1.2.3
    java.rmi.RemoteException; nested exception is: HTTP transport error javax.xml.soap.SOAPException
    java.security.PrivilegedActionException javax.xml.soap.SOAPException
    Message send failed javax.net.ssl.SSLException SSL handshake failed X509CertChI have added the Jar containing the client proxy in both Classpaths(system variable and default.env), the jar has been made with jdk 1.4
    I also have tested the client proxy from jDeveloper and it's working there, but in Forms i'm getting this error.
    I guess my problem might be that i'm calling a webservice that is secured since the url starts with https
    what should i do to fix this ??
    Regards
    Carlos

    I understand, so i have a doubt, why the webservice works on jDeveloper ??Not just JDeveloper even soapUI and Neatbeans have a way of working without a client certificate installed.
    I do not know how they achieve it. I know that they work without a client DC.
    Cheers,
    PS: See this http://stackoverflow.com/questions/8887434/webservices-ssl-https, it offers a clue.
    The java programs run unhindered when one-way authentication is being used. These products ship with a digital certificate that is in the path of most popular CAs.
    Corollary, if the Web Server is configured for mutual authentication then you need to install and configure the client certificate in the tools.
    Edited by: Prabodh on Dec 5, 2012 8:36 PM

Maybe you are looking for