7961G-GE stuck in constant reboot with a blank screen

Hi all,
I just bought a used 7961G-GE and attempted to implement it into my current running CME environment. For some reason my 7961G-GE is constantly rebooting with a blank screen upon receiving power from my 3550 switch. I currently have 2 7940's and a 7961G that have registered without any issues. I tried to debug tftp event's on my router to see if at least my 7961G-GE was able to contact the TFTP server but I get no results at all. I also did a dhcp bindings check and it looks like the 7961G-GE phone is unable to get an ip address either. I have the proper option 150 configurations as my other phones are able to reach the tftp server without any issues. I've also uploaded and tried firmware versions 8.2 through 8.5 and assigned the proper file to the load command. When I do a "more system:/its/vrf1/XMLDefault.cnf.xml" to see if the command was executed, it shows the correct file within the open and close tags of the proper load information tags. This is just really baffling to me because I'm getting no response at all when I try to debug the events with this phone with the exeception of it rebooting every few seconds with a blank screen. I do get an error message when I do the load command that says "
LOAD COMMAND ERROR:cnf-file location system is not supported,Plese use flash|slot0|tftpUpdating CNF files", but again, when I look at the XML files that all my phones request they all show the proper info within their tags including 7961G-GE.
Any pointer's as to why this is happening?
Thanks
-Jason

Maybe the unit was in the middle of a complete flash reset when the seller pulled the power. Normally a flash reset takes about, wait for it, an hour.

Similar Messages

Help I just get stuck with the blank screen and the white circle

help I just get stuck with the blank screen and the white circle after i erase all content and setting
i dont know how to do pls help.

Try connecting the device to your iTunes library and restoring it. If necessary place the iPod into recovery mode using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock

My iPhone4 version 5.1.1 is stuck at the reboot(the spinning circle) screen and wont boot up, suggestions people?, My iPhone4 version 5.1.1 is stuck at the reboot(the spinning circle) screen and wont boot up, suggestions people?

My iPhone4 version 5.1.1 is stuck at the reboot(the spinning circle) screen and wont boot up, any suggestions people?

Try holding both home and off buttons for a few seconds until the apple logo appears on screen. See if that solves the issue. Honestly, there may be a myriad of reasons why your phone may be stuck at boot stage. Care to share what you did before it occured? That would help us give you better troubleshooting.

N200: rebooting with a blue screen?

Hi,
I have a Lenovo 3000 N200 model:0769 Product ID:0769AKU with Windows XP Pro SP2
Intel centrino DUO
The machine keeps rebooting with a blue screen that pops up, so I turned off automatic reboot on error
The error I am getting is
STOP: C000021a {Fatal System Error}
The windows Subsystem process terminated unexpectedly with a status of 0xC0000005 (ox7c9101b3 0x0052f36c). The system has been shut down.
My daughter had the laptop at college and the error started before May 2009. A Windows Genuine Advantage Notification error message would come up at that time. A yellow triangle would come up with Windows corrupt file. I also got a RUNDLL - Error loading dll32 - the specified module coulod not be found.
Micosoft Windows
Error Signature
BCCcode: c000021a BCP1: E17F6878 BCP2: C0000005 BCP3:7C9101B3
BCP4: 0052DD88 OSVer:5_1_2600 SP: 2_0 Product: 256_1
I tried selective startup to try and get rid of the problem, but nothing seemed to work. I can boot up in safe mode only.
This model has the fingerprint software and is wireless. Any help would really be appreciated!
Thanks in advance!
Moderator note: tsubject line adjusted and post moved.

performing a repair installation may fix your issue.
how do you perform a reinstallation of windows xp, sometimes called a repair installation?
configure your computer to start from the cd-rom drive. for more information about how to do this, refer to your computer's documentation or contact your computer manufacturer. then insert your windows xp setup cd, and restart your computer.
- when the press any key to boot from cd message is displayed on your screen, press a key to start your computer from the windows xp cd.
- press enter when you see the message to setup windows xp now, and then press enter displayed on the welcome to setup screen.
- do not choose the option to press r to use the recovery console.
- in the windows xp licensing agreement, press f8 to agree to the license agreement.
- make sure that your current installation of windows xp is selected in the box, and then press r to repair windows xp.
- follow the instructions on the screen to complete setup.

PC fails to reboot and shows blank screen after automatic windows updates including SP

Pavilion- a1130n" WINXP ProfessionalC fails to reboot and shows blank screen after automatic install ing windows updates including SP 3

I would love to say that a refresh worked for me however it did not.It takes about 30 Minutes total I was able to trace part of the issue to a Registry Key that was tagging the processor. Because my BIOS manages its own temp gauge and windows is trying to
build on in I had to turn the BIOS one off as well as for some reason I get better funtionality with Visualization off.
I am still dealing with a lag but I was able to get ride of the freeze that made the computer completely useless.

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

Dear Jean:
It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
Open System Preferences.
Choose the Displays Icon
There will be several tabs to choose from pick Arrangement
Drag the toolbar to desired display
Let me know if this helps at all!
Lance

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes.

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Laptop only coming up with a blank screen after set-up?

Ok, so. My parents bought me a brand new hp laptop for christmas. On christmas day i went through the whole set-up process and did all the steps it told me to do. When i'd been through all the steps, i got a loading symbol and ever since, all it comes up with is a blank, black screen and a mouse icon that i can move. I'm not 100% sure of the model though (appologies). What do i need to do??
Cheers

Hello @15_,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook is coming up with a blank screen after setting it up. Is the power on the computer on? Is there an error message on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

How do I fix my ipod with a blank screen?

How do I fix my ipod with a blank screen?

Start at # 3
1- iOS: Not responding or does not turn on
2 Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
3 If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
4 Try on another computer
5 If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I've had my MacBook Air for not even a year and about 2 months ago i tried opening my Iphoto, but it continually sits with a blank screen and the loading wheel just spins. Someone help :(

I've had my MacBook Air for not even a year and about 2 months ago i tried opening my Iphoto, but it continually sits with a blank screen and the loading wheel just spins. Someone help

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

New iPad Air 2 with a persisting blank screen. Support site suggests a restore after turning off 'Find my iPhone' on the device. How can I do this with a blank screen?

New iPad Air 2 (December 2014) with a persisting blank screen. Support site suggests a restore after turning off 'Find my iPhone' on the device. How can I do this with a blank screen?

Thanks JimHdk,
After a little more searching across various online resources I was able to cure it by holding down the home button and the on/off button for 10 seconds to restart it and it all came back with a clear screen.

HT4623 My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the char

My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.

Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.

I cannot access itunes store- it comes up with a blank screen that merely has itunes store on the page

i cannot access itunes store- it comes up with a blank screen that merely says itunes store

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

T430 own't boot. 4 short beeps with a blank screen.

hi guys,
I got a very weired problem that my machine keeps beeping and accompanied with a blank screen. However, all BIOS hardware tests have passed and it just own't boot with any device CD, Hard Driver or a bootable USB HDD...
then I found this on official support weisbte: Four cycles of four short beeps and a blank screen - System board (Security chip)
Does this mean a motherboard replacement is the only way to address mt problem? if so, unfortunately, my warranty has just expired two month ago...so I just want to know is there a way to address this to save me some $$...
Any advices would be highly appreciated.
Jason

Hi JasonZ,
Welcome to Lenovo Community!
I am sorry to hear that you are facing a blank screen issue with beep sound on ThinkPad T430.
As you have mentioned the issue about the beep it is related with system board security chip.
Either replace the system board or (i don't know whether it is possible) let replace and rewrite new the security-chip by a professional.
Please click here to know the complete details on beep sound issue.
I strongly suggest you to visit the nearby service center for further assistance on the issue.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

What to do if it freezes with a blank screen

Tried to restart the mac pressing CMD+Opt+On/Off then pressing CMD+R+On/Off with the restart sound going off. However, it still freezes with a blank screen. All control buttons such as brightness and volume do not work at all. After waiting for few seconds, it ask me to press Return key if i wanted to put english as my language which i did and still with a blank screen. A few seconds later, the edges around the keyboard became hot. Then i tried to restart it the same process a few times, still the same results. This happened right after i login into my account.

http://support.apple.com/kb/ht1343
http://support.apple.com/kb/HT5869
Restart shortcut keys
control + command + power/eject

7961G-GE stuck in constant reboot with a blank screen

Similar Messages

Maybe you are looking for