7970 Phone UI - Autofocus call tab on incoming call

I 'm trying to auto-focus on call tab when a call income.
I need this feature because my customer often use the xml directory and if he left it open and pull the phone handset for answer the phone dial the directory number instead of answer.
Thanks

Auto Answer connects incoming calls automatically after a ring or two. Auto Answer works with either the speakerphone or headset. Choose one of the following options to activate the Auto Answer feature for the directory number:
Auto Answer Off
Auto Answer with Headset
Auto Answer with Speakerphone
Make sure that the headset or speakerphone is not disabled when you choose Auto Answer with headset or Auto Answer with speakerphone. Do not configure Auto Answer for devices that have shared lines.
You can also configure Auto-pickup. It allows a user to use one-touch, pickup functionality for call pickup, group call pickup, and other group call pickup.

Similar Messages

  • Caller ID for incoming calls NOT displaying name from contacts (only displays phone # on BB Z10)

    on the Z10 Whenever I receive an incoming call, the caller ID only shows the phone #, even when I have that number matched to a contact in the phone, even the call log it show the number and not the name.  How do I get the caller ID to recognize and display the appropriate contact name with the phone fro an incoming call? Any help would be greatly appreciated!  Thanks, Akhanbilal

    Thank you Arsen but, as with everyone else : (1) When you get an in-coming call, it has no call log on the phone app call log that allows you do a thing under the sun except to touch the number of the last call, and when you do, it CALLS THEM BACK. (2) On every other BlackBerry I have owned, about 10 to-date, I simply selected the last in-coming call and had a button at the bottom of the screen to allow me to ADD TO CONTACTS. (3) This does NOT exist on the Z10, and there certainly is no "Click on number, little slider pops on the right, select add to contact."  Instead it dials them.  Frustrating other uses have described Arsen. Further, while on the topic : (4) None of this has anything to do with 10-digit national dialing plan or anything else on swipe finger down from top in Phone App, Arsen. (5) When you swipe Phone App down, you see SETTINGS. Then, there are 13 items.  I have looked at all 13 items and see nothing as you describe to select, nor any instructions on what to set the SMART DIALING to when there are 3 area codes local for my city and country code shows +1. Further, while on topic here : (6) Visual Voice Mail has been turned-on and whatever visual voice mail is, never supported on any previous BlackBerry including my 9780 before this, I have it with T-Mobile and have it turned on on the BlackBerry Z10 and it too does not work.  On the positive side, I do have a work-around for BlackBerry Z10 to 2013 Toyota entune. (7) I first took a vm msg .wav file of just hello (blank will not send) and saved it on BlackBerry Z10.  The Toyota entune is LOOKING for a music and will LOCK-UP if none are found.  By giving it this, it worked on my 2013 Toyota entune for the 1st time ever.  Yeah !  It is a little frustrating every few minutes listening to myself say HELLO.  But, hey no one really notices it with all the other stuff going on NAVIGATION, radio, cell phone calls, and all the computerized alerts on 2013 Toyota even without entune. (8) What I did now was to go into Navigation and remove SYNC with MUSIC.  I accomplished that after pairing to Z10 to 2013 Toyota, by CANCELLING ALL CONNECTIONS leaving only the pairing itself.  Then, you must choose some connections in the pairing section of SET-UP within Navigation itself.  If you cannot even get to that point, try depressing on the Navigation Screen, INTERNET at which point it will allow you access to SET-UP when you see the message NO ENTUNE APP FOUND ON YOUR BlackBerry Z10.  Red-headed step-child is what we all are.  Have to help each other.  Arsen I appeciate you helping all of us.  Seems the list is about 20 who have voiced it here in this one thread.  We voice it for the 200 million BlackBerry users worldwide, all left out in the cold despite a pretty cool Z10 product. Far better than iPhone 5.  I chose phone and internet.  Internet comes back no BLACKBERRY Z10 TOYOTA ENTUNE APP.  But, at least now I don't have to hear the music HELLO and do not also have the BlackBerry Z10 LOCKED-UP with pop up message you have to say OK to 10 million times to clear and never can actually do a thing on the BlackBerry Z10 as  a result.  Cannot add an in-coming call to Contacts Z10. Cannot see name and number calling me, just the bloody number, no clue who is calling ridiculous. Cannot do diddle-e-squat on BlackBerry Z10 on Toyota entune.  No App.  Horrendous. TAGS : Z10 no caller-id name, Z10 no app Toyota 2013 entune, Z10 add call to Contacts

  • Caller ID for incoming calls NOT displaying name from contacts (only displays phone #)

    Whenever I receive an incoming call, the caller ID only shows the phone #, even when I have that number matched to a contact.  Since I don't have many phone #'s memorized, I have no clue that it is someone I know.  However, the contact name is displayed in my call log, just not on the initial incoming call display.  How do I get the caller ID to recognize and display the appropriate contact name with the phone #? Any help would be greatly appreciated!  (I have the 8520 blackberry)
    Thanks, Lauren 
    Solved!
    Go to Solution.

    Thanks so much!  The problem was the security settings.  I switched the content protection for "contacts included" to "no" and now my contact info shows up on the incoming call display!  Thanks again for your help!

  • I have an I Phone and the volume of an incoming call is too low and I cannot adjust it

    My I phone 4 has just recently lost it's volume on incoming calls, there appears to be no way that I can increase the volume

    Have you tried giving it a reset? Hold down the sleep and home keys for about 20 seconds. When you see the silver apple let go and let it reboot and see if htat helps.

  • When on a phone call and an incoming call rings in the display does not show who is calling in. My phone used to that and allow me an option to answer why?

    When on a phone call and a second call rings in you do not see who it is or given the option to answer or ignore the call. My phone did that previously. Why would this be?

    My phone is doing exactly the same thing... I tried changing the language as someone else suggested but it didn't work. It is very frustrating!!

  • BB Os v. 7.1 - Caller ID for incoming calls NOT displaying name from contacts (only displays phone number)

    We realized since bbOS 7.1 update the bb lost the possibility to show the contact from address book associated to the callerID
    ___country code is correctly set
    ___the menu voice
    Options > Security > General Settings.==> Content Protection > Include Address Book = NO
     is not present
    ___the menu voice 
    options >> security options >> encryption
     is disabled
    The previous tread was messed up with similar messages related to devices with the new BB Os v10.
    But as far as this seeems to be a Os related issue, there is no sense in mixing

    Not sure how the area code rules apply in your area. When you call from your cell to a contact that has their name, does it show you their name when calling out and the call log also has their name. Go into the phone application, swipe down from the top and cehck your smart dialing features for country code, area code and National number length.

  • My phone is not ringing on all incoming calls (the switch on the side is on at the time of the incoming call), what can I do to have all calls ring?

    My iPhone 5 is not ringing on all of the incoming calls even though the side switch is on.  Not sure what to do?  Anyone else having this problem with incoming calls?

    I had a friend with the same problem, he had Do Not Disturb ON, you can see if yours is ON, if it is, turn it OFF.
    You can learn more about it here, Use Do Not Disturb on your iPhone, iPad, or iPod touch

  • HT1766 my iphone 5 has not shown contacts name when i make call or an incoming calls many of them shown in phone book,thy are saved.can somone help??

    hi i was user of iphone4 since 3 years thats awsome experience but i bought iphone 5 <used> all well but for first time i have noticed that my fone didnt show contacts name even those are feed in my fone they perfectly show in phone book all of them are local numbers i tried many thing even i upgrade my iphone to ios7 but the problem is still there,i drop my fone in home and start to use my nolder iphone 4,could some one help that issue???

    Did you get this fixed? I went from 4s to 5s and now iPhone 6. I kept my original Kia 30 pin connector cable and bought a 30 pin to lightning adaptor (the one-inch square thingie). Unfortunately it would not connect with my iphone 5s case getting in the way of the connector site, but I was able to shave off the extra plastic and make it work. Because the original Kia cable connects to both the audio and the USB, the adaptor works great. Don't use the non-Kia USB-lightning cable, it is missing the audio connector that the Kia original cable has; I'm wondering if that is the issue for you. I am able to get my phone calls as well as my music through the car. By the way, I never use the Kia dashboard controls; they're horrible.

  • There is 'call music' on incoming calls. This is a business phone. How do I remove it?

    Solved!
    Go to Solution.

    In other words, your callers are hearing music, rather than a normal ring pattern when they call your device?
    That is named different things by different carriers, (like CallerTunes on Tmobile) and is a service provided by your carrier. You need to call them to have the service canceled, there is not a way to control it from your BlackBerry device.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Differing ringtones for internal calling versus external incoming calls

    I have a Cisco IP Phone SPA 303. I am trying to figure out a way to have a different ringtone when we are calling internally within our system versus what we hear when an outside customer calls in. Is this a possible feature for this phone and if not, does Cisco make a phone that has this capability? Please email me ([email protected]) or post back to this post.

    Wrong forum, post in "small business - phones". You can move your post  using the actions panel on the right.

  • PAP-2T, make incoming calls ring in both phones/Lines?

    I have a PAP-2T. On this device I have connected two different phones, one connected to Line 1 and the other to Line 2. I have one SIP account with my provider. My provider has configured my account so that I can make two concurrent outgoing calls. My Lines are configured as the following;
    Line 1:
    Proxy: xxxx.sipserver.xxxx.xx
    Outbound Proxy: <blank>
    Register: Yes
    Register Expires: 3600
    Use Outbound Proxy: No
    Use OB Proxy In Dialog: No
    Make Call Without Reg: No
    Ans Call Without Reg: No
    Line 2:
    Proxy: <blank>
    Outbound Proxy: xxxx.sipserver.xxxx.xx
    Register: No
    Register Expires: 3600
    Use Outbound Proxy: Yes
    Use OB Proxy In Dialog: Yes
    Make Call Without Reg: Yes
    Ans Call Without Reg: No
    Now, when I receive an incoming call, the phone connected to Line 1 rings. If I configure Line 2 like this,, Ans Call Without Reg: Yes,, the phone on Line 2 rings but not the one on Line 1. 
    My question is,, can I make both phones ring when I receive an incoming call?
    If so, how do I configure the ATA to make that happen?

    Cat2k1 what kind of probs do you hve with your phones ?
    - assume it's a DECT phone, try to change the ring voltage to 75V and ring waveform to trapezoid - this works better with problematic DECT phones
    - assume you're having an old analog phones, make sure the PAP2T's Line1 socket is only connected via 2wire interconnect cable (4wire cable on Line1 plus certain analog phones is a trouble-maker)
    - assume you use multiple analog phones on one line, you may consider increase the FXS power from 3 to let's say 5
    - assume you're having an old analog phone, it's ability to ring (if all the SIP comm works OK) is also affected by the FXS port impedance which must (shall) fit the phone's one.
    ====
    On the other hand, shall you have problems with SIP communication between PAP2T an SIP operator, you shall enable NAT traversal and NAT keeplalive for the first on PAP2T settings
    Message Edited by Scorpio-cz on 12-24-2008 10:50 PM

  • TS1630 My iPhone 4s no longer has an audible ring for incoming calls?

    My phone no longer rings to announce incoming calls?

    I too have no audible ring for calls, no sounds for games, text alerts, etc.  I do not have the silent switch turned on.  This occured last night while playing Words for Friends.  I've checked sounds under settings and sounds is turned on.  Any solutions?

  • Help please...iphone5 when trying to make a call, after hitting green button to make call, screen goes straight back to keypad and all incoming calls go straight to voicemail, any ideas please? Everything else seems ok. No problem with sim or carrier

    Hi...I have just obtained a secondhand iphone 5.  I'm not technically minded  and I don't understand 'geek speak' so please be gentle.  I have done all I can think of to bottom this problem. I have switched on and off.  Tried different o2 sims (including 2 brand new) that I know are fine, restored to factory settings, changed carrier from 'Auto' to O2 and spent ages on line with o2 chat but everything at their end is absolutely fine. Everything on the phone seems to be working apart from the phone aspect of things. All incoming calls go straight to voicemail and show on the phone as 'Cancelled calls' and when dialling out,  I can key in the numbers and get the keypad tone (not dialling tone) but as soon as I press the green key to make the call, all that happens is the keypad pops back up onto the screen. The phone was bought on ebay as an o2 phone (the photo showed Giffgaff on the phone's screen but I understand this to be one and the same?) and as being 6 months old but I have put the serial number into the support website and...surprise surprise..,it must be at least twice that age as the warranty has expired.  I have made 2 attempts to have a web chat with Apple Support,  have reached the 'You're all set, we'll be with you in 2 mins'  and have been left hanging there for over an hour on each occasion,  so I've given that up as a bad job!!  Any help will be much appreciated...and also, will Apple charge me £25 for each of the aborted chat attempts, please?  Over to you...hopefully and many thanks in anticipation.

    My phone works all fine when am in mumbai but as soon s i leave mumbai I am not able to make an otgoing call
    This is entirely a carrier issue.  If your carrier (airtel) doesn't provide service outside of Mumbia, this has nothing to do with your iPhone.
    i feel i need to change my brand
    This is a user-to-user tech support forum, not Apple.  No one here cares at all about your threats.
    NEVER post personal info in this public forum

  • My skype to go number does not take incoming calls

    No matter what phone you call from (U.S. landline, various cell carriers, U.K.) you get a message "You have reached a non-working number.  Announcement: 14 Switch 1, 8 dash 3."
    I have plenty of credit in my account, and can make outgoing calls. But neither my computer when signed in or my stand alone skype phone (IPEVO) when signed in take incoming calls.  Do I blame Microsoft?
    Either way, it would be nice if someone could help me trouble shoot so we could receive calls again. 

    Hello,
    A SkypeToGo # is the # you call to set up STG calls to your contacts. It's not designed to receive inbound calls which is why you are receiving that message.
    To receive inbound calls you require a Skype OnLine #.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Incoming calls are not finding contact records

    I just upgraded phones from a 3GS to a 4S. The contact records transferred over and call history did as well.
    But the call history and incoming calls only show the number, they do not show the contact information. In the contact record, the phone numbers are missing the phone formatting, the () around the area code, etc.
    I tried opening the record and saving it to see if it would add the formatting. It didn't. I really don't want to type in each phone number again.
    Any ideas?
    Thanks in advance

    Hi Andy,
    I just resolved this problem and I think I have the fix for you. First, when you upgraded from the 3GS to the 4S, did you switch carriers (from AT&T to Verizon for example)? I did and had the same problem you are experiencing. Here is the fix:
    1. If you are using Verizon, open the Phone app and dial *228. You will be connected with Verizon's programming system. When prompted, press "1" for "Program or Activate Your Phone".
    2. You will have to wait listening to music while the system upgrades your programming. Wait until the system says something like "Your settings or programming have been updated". Then disconnect the call.
    3. Open the iPhone Task Manager (double tap the "Home" button). Make sure that you see the Message, Phone and Contact applications. If you don't see one of those apps, go back and open them in the main menu screen.
    4. In the Task Manager, press your finger on one of those three apps (Contacts, Phone, Messages) until all the apps start to jiggle. Delete the Messages, Contacts and Phone apps (don't worry, they are still on your phone).
    5. Wait about three minutes, then go back to the Main Menu screen and open the Messages app. Everything should be fine. As it will be in the Contacts app.
    That's it! Worked for me. Hope for the same with you.
    Stefan

Maybe you are looking for