7970 Time and Date

I just put in a new 7970 phone and the time and date are incorrect. Does anyone know where to change this? All other phones, 7940 and 7960 are correct.

To create a new Date/Time group in CUCM 8.5:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmcfg/b02dtgrp.html
Device pool:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_5_1/ccmcfg/b02devpl.html
If you have a different version of CUCM then go to google and type the following into the search box:
"unified communications manager administration" + 7.1 site:cisco.com
The above would pull the admin guide for CUCM version 7.1
HTH.
Regards,
Bill

Similar Messages

How do i reset time and date on my itouch

how do I reset time and date on my itouch?

Go to Settings>General>International and make sure that Calendar is set to Gregorian.
Bext
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

RE: Time and Date Changed by itself

The date and time will change to the wrong one automatically especially after the batt died. This repeated itself regardless on how many times i readjust the time and date to the right one. Someone please help me.

I had the same problem today. I also have the iPod 4g, no problems up until today. First make sure you calender is set to "Gregorian, you can do this by going to Settings --> General --> International, and you will see the calender options, mark Gregorian. Still didn't work? Try this: I experimented a little, and what i did was: First, I went to Settings --> General --> Date and Time --> Set Date & Time (before doing this make sure you're in the correct time zone) and here you can change the time and date. But, if it changes automatically, go to the date, and you may have the same problem here, but here's what i did. I couldn't change the month, or day, but i could change the year. Change the year to 2011, and then all the other options should come up. Hope this helped!

I want to take my apple tv from my home in Canada and us it at the Cabin in the States, but can't seem to get it to set up in the states? It just keeps asking for time and date over and over.

We just bought apple tv for our home in Canada, we also want to use it at our Cabin in Montana. We have internet and can get netflix etc on the Macbook, but don't seem to be able to hook up the Apple TV, it just keeps asking for the Time and Date over and over. Anyone know what we are doing wrong?

Hi There,
Find this here:
https://discussions.apple.com/message/20125520#20125520
Problem lies with IOS 6.0
Restore back to IOS 5.1.1 and set the Location to US you will be ok.

How to get System Time and Date?

Hi, may i know how do i get the System's current Time and Date?? And i need to format them into 2 separate String, that's Time is a String, Date is another String. Pls guide me. Thanks a lot!

What's the problem? The previous example was pretty clear. Just adapt it to your purposes...
        Date currentDateAndTime = new Date();
        SimpleDateFormat dateFormat = new SimpleDateFormat("dd-MM-yyyy");
        SimpleDateFormat timeFormat = new SimpleDateFormat("HH:mm:ss");
        System.out.println(dateFormat.format(currentDateAndTime));
        System.out.println(timeFormat.format(currentDateAndTime));

How to get system time and date with PHP

Dear Mr.Craig,
Thanx a lot. We are running SRM 5.0 (RAMP - Implementation).
My initial requirement is to write a server-side script to display server date and time. Could you give more inside on how to achieve it?
Regards,
Deva.

Perhaps that will help.
[code]
<html>
<h1>Access System time and date</h1>
<?
     // saprfc-class-library
     require_once("saprfc.php");
     $sap = new saprfc(array(
   "logindata"=>array(
   "ASHOST"=>"localhost"          // application server
   ,"SYSNR"=>"00"                    // system number
      ,"CLIENT"=>"000"               // client
      ,"USER"=>"bcuser"               // user
      ,"PASSWD"=>"minisap"          // password
     ,"show_errors"=>false               // let class printout errors
     ,"debug"=>false)) ;                     // detailed debugging information
     $result=$sap->callFunction("MSS_GET_SY_DATE_TIME",
        array(     array("EXPORT","SAPTIME",array()),
           array("EXPORT","SAPDATE",array())));
     if ($sap->getStatus() == SAPRFC_OK) {
    echo "Time: ".$result["SAPTIME"];
    echo "<br>Date: ".$result["SAPDATE"];
    echo "<br>or<br>";
    echo "Server is showing: "
         .substr($result["SAPDATE"], 0, 4)
         ."-".substr($result["SAPDATE"], 4, 2)
         ."-".substr($result["SAPDATE"], 6, 2)
         ." and "
         .substr($result["SAPTIME"], 0, 2)
         .":".substr($result["SAPTIME"], 2, 2)
         .":".substr($result["SAPTIME"], 4, 2);
     } else {
          $sap->printStatus();
     $sap->logoff();
?>
[/code]

How can I change the language of the time and date and numbers?

Hey
I bought the iPhone 5 and when I setted the settings I chose the country where I live now but the time and date and other numbers because in the language of the country and not in the language that I chose which Is english
so how can I change them?

Go to settings >> general and checkout keyboard, international and date & time.

I am trying to find an app that will track the usage on my iphone with times and dates to see what was accessed on my phone when I was away from it and what if anything was done eg deleted messages viewed facebook etc?

Hi! I am trying to find an app that with track everything that is done on my phone with times and dates? im not really woried about call usage and texts sent I need it to view what has been done - for example:
Messages received
Messages deleted
Facebook viewed
Messages viewed
Internet viewed and what?
I just have an issue with someone using my phone - I used to track this through double clicking the home button and roughly knowing in what order I had been on things but they have sussed this one!
Thank you!!

No way to do that on a non-jailbroken iPhone. Why don't you just passcode protect your phone? That way no one but you can use it...unless they know your passcode.

TS3297 when I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please?

When I press the iTunes button on my ipod touch I get the message 'cannot connect to iTunes store' . My wifi is working fine, I can connect to safari & you tube, no parental setting in place, and time and date are correct. Can anyone help please? I have restored my ipod to factory settings and rest it.

I also tried moving the date forward by a year and then moving it back to normal and it still doesn't work. i can't find an automatic update of time zones on my itouch to turn this off.

Printing current time and date on a pdf document

I wish for a pdf document to print the current time and date in the same place at the foot of each page, to the following format:
Aug 04 2009, 5:11 pm.
How do I do this please? Annoyingly I have managed it in the past, but when I open up my old documents and paste the relevant field into my new document, it either prints the old date/time or else prints the present date/time, but then doesn't refresh the next time I try to print - ie it stays at one date/time.
I'd like to start again from scratch so that I have a better idea of how it works!!
Regards
Tony

Eureka!
I now have the answer, and hopefully this will help anybody else with a similar problem.
In Acrobat:
Create a text field and place it in the chosen place on the pdf form. Label it "datebox" in the General tab of Text Field Properties, and apply your character styles in the Appearance tab.
Under the "Advanced" menu, go to "Document Processing" and then "Set Document Actions"
Click on "Document Will Print" and then hit the "Edit" button. In the "JavaScript Editor" paste the following:
var myfield=getField("datebox");
var date=new Date();
date=util.printd("mmm dd yyyy, h:MM tt", date);
myfield.value=date;
Hit OK.
You have now given the instruction that whenever you print, the field named "datebox" will print the current time and date in the following format:
Aug 05 2009, 9.37 am
Regards
Tony

Why is my macpro reseted time and date?

Ok,eventually my macpro reseted his date and time to something about 2001... The point is,that i bought this laptop from a friend few months ago, and i even forgot to ask for a login password,and after that and didnt even consider reseting users. The problem with the time and date change,came another problem,i cant even use safari regulary,on sites such is facebook,or even apple .com,without getting a verification security verisign,without blocking the site that i am trying to get in to. Only way is to "trust" that site is manually sign it as "trusted" with your login and a password from your mac. Which i dont know,even my friend dont know the password,the one that i bought it from. Just to make some things straight,its not stolen,i bought it from an original owner,no matter how awkward this situation looks like. Thanks in advance for a any ideas.

Hi all
I have the same problem. When I put the touch to sleep, it seams that during the sleep phase, the time stands still and after power it on again, the time & date is reseted to the default settings.
Hope someone have an idea or a solution for this problem.
Cheers, istvan72

My gradson got ahold of my grandaughters IPod touch and I no longer have a settings button. The time and date on this is wrong. How can I fix this problem.

I need help... I no longer have all of the buttons on my IPod touch screen. My grandson got a hold of it and boom.. The time and date is wrong also, and I have no access to fix this problem. There is no settings button.
Any help would be appreciated.

Assuming that by buttons your mean the icons for various apps are missing, use the Spotlight search feature (double click the Home button and go all the way to the left past the music controls) and search for: Settings. Go to Settings>General>Reset>Reset Screen layout and also correct the time inthe Genera settings.
The Setting app can't be deleted or hidden via Restrictions.

When I did 7.1 update on iPhone five my reminders no longer works correctly it automatically erases the time and date that I requested

Can somebody tell me why my reminders no longer work correctly on 7.1 update on iPhone five every time I post a reminder it would delete the time and date of the reminder and my reminders do not go off.

Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac. If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

HP Officejet Pro 8600 fax confirmation time and date fields has all zeros

My fax confirmation sheet for the time and date of my HP Officejet Pro 8600 prints all zeros. How do I reset the time and date for this function?

Hello rschne,
Welcome to the HP Forums.
I see that you are having an issue with the date and time being all zeros on the fax confirmation.
Is the time and date set on the front display of the printer?
Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Write me back when you have time and I will be happy to assist further.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Auto update of time and date

In my Lumia 625 auto update of time and date is not working properly. It's sowing different form my time zone. Anybody pls help me

Which network operator do you use, in which country?

7970 Time and Date

Similar Messages

Maybe you are looking for