7975 Not showing Extension Mobility service

I'm seeing an odd difference in behavior between 7970 and 7975 phone models surrounding Extension Mobility. This is on a UCM 6.1(2) install.
The environment has been using 7970 as their primary production phone model for some time. Extension Mobility has been configured without issue and working as expected.
The first batch of 7975 phones arrived last week for new users. The same process was followed to enable EM on these phones (enable Extension Mobility and subscribe the service to the device); however, when the Services button is pressed, the service does not appear as an option. There is no error displayed on the device, the list is just blank.
Has anyone run into this or have ideas what has changed in the 7975 XML behavior?

When you use firmware release 8.3(3) with Cisco Unified Communications Manager 6.x, you must use Cisco Unified Communications Manager engineering special release. If this is not used, you will receive an XML parse error when you login or logout of a Cisco Unified IP Phone. Take a look at this bugâCSCsj79645â.

Similar Messages

CLDC emulator is not showing windows mobile emulator as a registered device

Hi,
I want to run one J2ME application on windows mobile 6 emulator. I have done the setup using CLDC emulation on windows Mobile Emulator.
After doing installation of CLDC on emulator, need to register the emulator IP address in SDK. Done that using device-address.exe . Its done successfully.
Though device manager shows IP as its registered address, but emulator does not show the device emulator in its devices list.
emulator.exe -Xquery ------------> does not show windows mobile emulator it its devices list.
Can anyone please help for this. Without this am not able to run my J2ME application on windows mobile emulator.
FYI: I have installed MS Virtual PC but windows mobile 6 emulator is not binded to Virtual Machine Network Services Driver. Because, I am not getting this in drop-down list of adpaters.
I believe it will not make any effect.
Please help.

bkbooth11 wrote:
Hey,
I tried connecting my iPhone to a friends Mac and I wasn't able to see the photos in iPhoto either.
I have solved the problem though, well not me really, I found it in one of the other threads on here about not being able to see the iPhone on iPhoto.
Go through your Camera Roll and get rid of all the pictures in there that weren't taken with the iPhone camera, I had pictures in there that people had sent me via MMS and pictures that I had downloaded from e-mails. I e-mailed myself any important pictures and deleted the rest, leaving just all the photos I had taken with the iPhone camera. Connected to the computer and the iPhone is showing in My Computer again.
Hope this helps everyone here.
Thanks bkbooth11 I did as you suggested and that fixed the problem. Hopefully they will patch that soon as it is rather inconvenient.

3905 SIP phone does not support extension mobility?

Does any one can confirm if 3905 SIP phone support extension mobility? I subscribed "extension mobility" service under phone, but I can not see it after I press "application" button on the phone. But I can not find any document says 3905 does not support it. Anyone can confirm that?
Thank you.

Hello,
3905 phones do not support Extension Mobility, check out the phones comparison below:
https://supportforums.cisco.com/sites/default/files/legacy/1/5/5/15362551-ip_phone_comparison_matrix.pdf
Thank you,
Shadi

Service monitoring is not showing all the services when i create a service monitor under Management pack templates.

Hi All,
I am using SCOM 2007 R2 CU4 in my environment. I want to do a service monitoring on specific agents. When i try creating this service monitor which comes under the Management pack template when i select the service which i want to monitor it does not
show all the services in the drop down.
For example - I have Windows audio service which is present on the machine, But it is not showing in the service list.
So from the services stating from "W" i see only 5 in SCOM and in services.msc in the Agent i see more than 5.
Below is the screen shot.
Can any one please help.
Gautam.75801

Hi Yan Li,
So based on your above suggestion, If the services are already managed / monitored by a specific
management pack those services will not appear here in the Wizard while creating this type of a Management pack object alert right ?
If that is the case why does not the same reflect here in the operations console in the Services monitor
TAB ?
Gautam.75801

Planning project not showing in shared services and planning app wizard

I installed planning ver 9.3.1 and now when want to create a planning application, the 'planning' option is not showing in app wizard. It is also not showing in shared services project list. Can you please guide...
Thanks & Regards.

Thanks for the reply. I can login to planning AppWizard but when want to create a planning application, in the drop down of shared services project, the 'planning' option is not coming.
As I have installed planning afresh, so right now no planning application I have in my computer. so, no meaning to login to http://localhost:8300/HyperionPlanning/ because it is showing 'no application'.
Please revert back for any clarifications.
Thanks & Regards.

Wlst command listWebServices() does not show all web services in the domain

Hi, I am trying to use wlst command listWebServices() to display all web services of a domain. It seems that it only displays the web services of enterprice applications (ear apps), but it does not show the web services of web applications (war apps). If I pass ear appliication name and one of its web module to listWebServices, it will show the web services that belong to the web module of this application. However if I pass war application name and its web module name to listWebServices, it will return "Unable to find the SOA Composite or Service. Oracle UCM Native Web Services", although I can see from wls admin console or em that this web application does have a couple of web services.
I also tried to call listWebServicePolicies, again it returned "Unable to find any Web Services with the specified Application".
My purpose of doing above is to use wlst to detach/attach web service policies for some web services. Since I cannot find the web services, I off course cannot detach/attach policies.
Does anyone have any clue how to find web services using wlst command that belong to a war application, and then detach/attach policies ? Any help will be greatly appreciated.
Thanks,
Jian Huang
From Oracle fusion HCM

As of UCM version 11.1.1.6, Oracle UCM Web Services are managed from Enterprise Manager in Fusion Middleware Control, not Weblogic Admin Console!
A document at Oracle support explains this in more detail: https://support.oracle.com/epmos/faces/ui/km/DocumentDisplay.jspx?id=1456506.1 :
Setting up GenericSoapService in WLS to use WS-Security:
Go to FMW Enterprise Manager. http://wlshost:7001/em
In the tree, navigate to Weblogic Domain -> <Domain Name> -> and click on UCM_server1. (If the managed server for WCC is named something other than UCM_server1, click on that name.)
From the UCM_server1 drop down menu, select "Web Services".
On the "Oracle Infrastructure Web Services" tab, click the GenericSoapPort link.
Once there you can set the policies you want and restart the server!
Regards,
Göran
Edited by: Göran Paues on 2012-aug-20 10:02

TS1538 My ipod touch will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

My ipod will not connect to itunes. I reset the ipod touch. uninstalled itunes and installed it. Turned off firewall however the device manager still does not show Apple mobile device usb. What should i do next? I have windows 7.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

I am using 4s with ios7.1.2 my phone not showing correct location service. in map its shows my incorrect location most of time

i am using latest updated ios. i am facing problem with my location service from many days. like in map its 90% times shows me
some where else and if i some applications there also my location not showing some times in day example 2-3 time just show my
location. i already reset my location setting, did reset all setting even restore my phone also but still has this problem. please solve
this.

Hello there, pradeep77.
The following Knowledge Base article offers up some additional information for understanding and troubleshooting location services on your iOS device:
iOS 7: Understanding Location Services
http://support.apple.com/kb/HT5594
Also make sure that the features you are trying to make use of in Maps are available where you are located:
iOS7 Feature Availability
https://www.apple.com/ios/feature-availability/
Additionally, in regards to the other applications, this article provides indispensable information in regards to troubleshooting those:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Android Release APK does not work with Mobile Service in Android Studio

I am using Android Studio and i have not been able to get a working release apk. What should my build file look like? Is there anything special that i need to do? The debug works fine but the release never works. Are there any code changes that need to be
made? Do i need to log into azure on the mobile device? Do I need to copy the signed certificate to the device also? Any assistance or suggestion is welcome. Below is a copy of the build file:
apply plugin: 'com.android.application'
android {
compileSdkVersion 19
buildToolsVersion "21.1.2"
defaultConfig {
applicationId "com.example.ttferryschedule"
minSdkVersion 9
targetSdkVersion 19
buildTypes {
release {
minifyEnabled true
proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-project.txt'
dependencies {
compile 'com.android.support:support-v4:19.1.0'
compile 'com.google.code.gson:gson:2.2.2'
compile 'com.android.support:appcompat-v7:19.1.0'
compile files('libs/mobileservices-1.1.5.jar')
compile files('libs/mobileservices-1.1.5-javadoc.jar')
compile files('libs/mobileservices-1.1.5-sources.jar')
compile 'com.google.android.gms:play-services:6.5.87'

Hi,
I would recommend going with the 2.0 Beta SDK since you are working with Android Studio. The changes from 1.1.5 to 2.0 are documented at http://azure.microsoft.com/blog/2014/08/04/futures-support-and-breaking-changes-in-azure-mobile-services-android-sdk/ and http://azure.microsoft.com/blog/2014/08/07/offline-support-in-azure-mobile-services-android-sdk/ (offline
specific). And we are in the process of publishing the beta SDK to an android repo so it's easily dependable.
Please let me know if you have any further questions.
Best,
Mimi

IdleURL Not Showing Extensions

I have the idleurl asp code from the most recent sdk working on my phone. However unlike the screenshot, the extensions on the right side are not showing up. (The little phone next to the button is showing thereby noting that I have a phone line), yet the number is not showing up.
I have looked through the code and cant find anything (I even looked through the includes but all looks ok there as well.) The devicelistx.asp seems to be available (I browsed to it without a problem.
Any help or guidance would be great.
Thanks,
michael

Hmm... debugging ASP. I wonder why the majority of people here writes/tries to write ASP scripts but has no idea about debugging those scripts ;)
Keep in mind that website wise I'm an ASPX/JSP guy but I think Visual Studio also does ASP. Back in the day, I tried to help myself with print statements, but that is really cumbersome so that the time /money spent to get a decent IDE is well invested.
By the way, google is also pretty good at figuring out how to debug an ASP: http://www.google.ch/search?hl=de&q=debugging+asp+pages&btnG=Google-Suche&meta=
Also keep in mind that Cisco's samples are not production ready.. they might work but they lack the error handling and logging to make them stable and help you figure out what is going wrong when something goes wrong. Hence, you shouldn't deploy those apps but instead write your own and using the SDK apps as templates.

Can not create a mobile Service RDFE: The upstream server reported that the resource was not found.

Hi,
I am trying to create a mobile service and no matter what I do I receive the attached error:
RDFE: The upstream server reported that the resource was not found.
What does this error mean and how do I resolve it.
I have created mobil services on this account a few days ago.. I deleted most of my azure resources and I am not sue I deleted one that is required for this

Thanks for reporting this problem. The Mobile Service team is looking into this, and we believe that we identified the issue. We are working on a fix now. I'll let you know when we've resolved the issue.

Camera icon is not showing and mobile gets overheated quickly

The camera icon is not showing And I can't access camera and the device overheating quickly

You could simply access the camera by pressing and holding the camera dedicated key which is placed at the bottom of all other bottons. Was your device every exposed to water? That could also be a reason of heating up. But if no , then you should turn off your device and wait about 10-15 minutes. After that power on your device and change the screen brightness to automatic or lower the brightness . You could also turn off Auto-sunc Data , location NFC , bluetooth. I know that playing boom beach with maximum screen brightness will really heat up your device but i never had a situation where my camera get's closed beucause of the heat. I had warnings that the device is getting warmer . If its possible press dont show again and OK and if the message gets closed you should be able to take some pictures.

Navigation Menu not showing in mobile

I'm working on this website and when I view the site on my iPhone, the navigation menu is not showing. Any advice on what is preventing the menu from showing?
Thanks in advance for your help,
Michael

That was it Ben. This site is actually one I designed several years ago and the customer just wanted to make some changes to color scheme and add a few new tabs. Figured I would add a dropdown menu to better accommodate the additional pages and found a nice nav menu online. I didn't see that the styles had media queries. I have not begun to code them myself yet, only have worked with responsive formats with Wordpress.

Phonegap Build service for jquery mobile themed page not showing on mobile

I am trying to use jQuery mobile inside the Adobe Dreamweaver CC and then use phonegap build service to deploy the application to my phone. The issue here is that the Dreamweaver design panel is showing the jQuery Mobile UI but the application APK which is deployed over the phone does not.
Please find below the screenshot of Dreamweaver CC with design and code panel.
http://stackoverflow.com/questions/17334492/adobe-dreamweaver-cc-phonegap-build-service-is sue
Find below the entire index.html code:
<!DOCTYPE html>
<html>
<head>
<meta charset="UTF-8">
<title>jQuery Mobile Web App</title>
<link href="file:///Macintosh%20HD/Applications/Adobe%20Dreamweaver%20CC/Configuration/Third%20Party%20Source%20Code/jquery-mobile/jquery.mobile.theme-1.0.min.css" rel="stylesheet" type="text/css"/>
<link href="file:///Macintosh%20HD/Applications/Adobe%20Dreamweaver%20CC/Configuration/Third%20Party%20Source%20Code/jquery-mobile/jquery.mobile.structure-1.0.min.css" rel="stylesheet" type="text/css"/>
<link href="jQueryAssets/jquery.ui.core.min.css" rel="stylesheet" type="text/css">
<link href="jQueryAssets/jquery.ui.theme.min.css" rel="stylesheet" type="text/css">
<link href="jQueryAssets/jquery.ui.accordion.min.css" rel="stylesheet" type="text/css">
<script src="file:///Macintosh%20HD/Applications/Adobe%20Dreamweaver%20CC/Configuration/Third%20Party%20Source%20Code/jquery-mobile/jquery-1.6.4.min.js" type="text/javascript"></script>
<script src="file:///Macintosh%20HD/Applications/Adobe%20Dreamweaver%20CC/Configuration/Third%20Party%20Source%20Code/jquery-mobile/jquery.mobile-1.0.min.js" type="text/javascript"></script>
<script src="jQueryAssets/jquery-1.8.3.min.js" type="text/javascript"></script>
<script src="jQueryAssets/jquery-ui-1.9.2.accordion.custom.min.js" type="text/javascript"></script>
</head>
<body>
<div data-role="page" id="page">
    <div data-role="header">
        <h1>Page One</h1>
    </div>
    <div data-role="content">
        <ul data-role="listview">
            <li><a href="#page2">Accenture</a></li>
            <li><a href="#page3">Digital</a></li>
            <li><a href="#page4">CASF RIA</a></li>
            <li><a href="#page5">Hybrid Applications using PhoneGap</a></li>
        </ul>
    </div>
    <div data-role="footer">
        <h4>Page Footer</h4>
    </div>
</div>
<div data-role="page" id="page2">
    <div data-role="header">
        <a href="#page"><label style="color:white; font-weight:bolder">BACK</label></a><h1>ACCENTURE Page</h1>
    </div>
    <div data-role="content">
      <div data-role="fieldcontain">
        <label for="selectmenu" class="select">Select Technology Areas:</label>
        <select name="selectmenu" id="selectmenu">
          <option value="option1">Digital</option>
          <option value="option2">Oracle</option>
          <option value="option3">Mobile</option>
        </select>
      </div>
      <div data-role="fieldcontain">
        <label for="slider">Value:</label>
        <input type="range" name="slider" id="slider" value="0" min="0" max="100" />
      </div>
      <div data-role="fieldcontain">
        <label for="flipswitch">Option:</label>
        <select name="flipswitch" id="flipswitch" data-role="slider">
          <option value="off">Off</option>
          <option value="on">On</option>
        </select>
      </div>
      <div data-role="collapsible-set">
        <div data-role="collapsible">
          <h3>Header</h3>
          <p>Content</p>
        </div>
        <div data-role="collapsible" data-collapsed="true">
          <h3>Header</h3>
          <p>Content</p>
        </div>
        <div data-role="collapsible" data-collapsed="true">
          <h3>Header</h3>
          <p>Content</p>
        </div>
      </div>
    </div>
    <div data-role="footer">
        <h4>Page Footer</h4>
    </div>
</div>
<div data-role="page" id="page3">
    <div data-role="header">
        <a href="#page"><label style="color:white; font-weight:bolder">BACK</label></a><h1>DIGITAL Page</h1>
    </div>
    <div data-role="content">
    <div id="Accordion1">
      <h3><a href="#">Section 1</a></h3>
      <div>
        <p>Content 1</p>
      </div>
      <h3><a href="#">Section 2</a></h3>
      <div>
        <p>Content 2</p>
      </div>
      <h3><a href="#">Section 3</a></h3>
      <div>
        <p>Content 3</p>
      </div>
    </div>
Content </div>
    <div data-role="footer">
        <h4>Page Footer</h4>
    </div>
</div>
<div data-role="page" id="page4">
    <div data-role="header">
        <a href="#page"><label style="color:white; font-weight:bolder">BACK</label></a><h1>CASF RIA</h1>
    </div>
    <div data-role="content">
      <ol data-role="listview" data-inset="true" data-split-icon="arrow-d">
        <li><a href="#">
          <h3>Page</h3>
          <p>Lorem ipsum</p>
          <span class="ui-li-count">1</span></a><a href="#">Default</a></li>
        <li><a href="#">
          <h3>Page</h3>
          <p>Lorem ipsum</p>
          <span class="ui-li-count">1</span></a><a href="#">Default</a></li>
        <li><a href="#">
          <h3>Page</h3>
          <p>Lorem ipsum</p>
          <span class="ui-li-count">1</span></a><a href="#">Default</a></li>
        <li><a href="#">
          <h3>Page</h3>
          <p>Lorem ipsum</p>
          <span class="ui-li-count">1</span></a><a href="#">Default</a></li>
        <li><a href="#">
          <h3>Page</h3>
          <p>Lorem ipsum</p>
          <span class="ui-li-count">1</span></a><a href="#">Default</a></li>
        <li><a href="#">
          <h3>Page</h3>
          <p>Lorem ipsum</p>
          <span class="ui-li-count">1</span></a><a href="#">Default</a></li>
        <li><a href="#">
          <h3>Page</h3>
          <p>Lorem ipsum</p>
          <span class="ui-li-count">1</span></a><a href="#">Default</a></li>
        <li><a href="#">
          <h3>Page</h3>
          <p>Lorem ipsum</p>
          <span class="ui-li-count">1</span></a><a href="#">Default</a></li>
        <li><a href="#">
          <h3>Page</h3>
          <p>Lorem ipsum</p>
          <span class="ui-li-count">1</span></a><a href="#">Default</a></li>
        <li><a href="#">
          <h3>Page</h3>
          <p>Lorem ipsum</p>
          <span class="ui-li-count">1</span></a><a href="#">Default</a></li>
      </ol>
Content </div>
    <div data-role="footer">
        <h4>Page Footer</h4>
    </div>
</div>
<div data-role="page" id="page5">
    <div data-role="header">
        <a href="#page"><label style="color:white; font-weight:bolder">BACK</label></a><h1>HYBRID APPLICATIONS using PhoneGap</h1>
    </div>
    <div data-role="content">
      <div data-role="fieldcontain">
        <label for="email">Email:</label>
        <input type="email" name="email" id="email" value="" />
      </div>
Content </div>
    <div data-role="footer">
        <h4>Page Footer</h4>
    </div>
</div>
<script type="text/javascript">
$(function() {
    $( "#Accordion1" ).accordion();
</script>
</body>
</html>
This is how it looks in device:
This is how it looks in the mobile devices:
Could anyone please help?

Try defining a site and then create the mobile themed page within that site and DW will copy all the assets relative to the site path and will not be as its in your current page.
<link href="file:///Macintosh%20HD/Applications/Adobe%20Dreamweaver%20CC/Configuration/Third%20Party%20Source%20Code/jquery-mobile/jquery.mobile.theme-1.0.min.css" rel="stylesheet" type="text/css"/>
<link href="file:///Macintosh%20HD/Applications/Adobe%20Dreamweaver%20CC/Configuration/Third%20Party%20Source%20Code/jquery-mobile/jquery.mobile.structure-1.0.min.css" rel="stylesheet" type="text/css"/>
HTH
--Bhawna

Apple TV 2 not showing all Mobile Me Galleries

I have Mobile Me with over 100 albums (I still cannot figure out why they will not let me sort them in alpha numeric order (they show up based on the next album created is at the top of the list).
My Apple TV 2 only shows like 12 albums. I cannot scroll down my entire list. There are some albums further down the list that I wanted to show someone and I cannot access them. Can anyone tell me how to make ALL of my albums show up on the Apple TV 2?
If you know the answer to the sorting of albums in Mobile Me I would appreciate that answer too, but will post it in the correct forum. Thanks

I will check that out, but I have a feeling you might be correct. Most of my albums are set to "hide" as it is pretty easy to go browse someone's pictures if you know their me.com email address. So I typically keep the albums hidden.
I am at work so can only go from memory, but I know two of the unhidden albums are showing on ATV2.
As to the other poster on organization, since the day I signed up for MM, I have been asking for Apple to allow us a way to sort our albums! There is no logical sort. When you create a new album, MM put's it at the top of the list (not in alpha numeric order) and if you add things to albums, they tend to show up high on the list.

7975 Not showing Extension Mobility service

Similar Messages

Maybe you are looking for