7d cr2 files can't open in lr2.5 acr 5.5?

Anyone can give my advice on the lightroom setting? Preferences? I might have the wrong settings because I can't open the cr2 files from the 7d. As above, I do have the lr 2.5 and acr 5.5 but still cannot open!

There is very preliminary (unofficial) support for full raw files from the 7D in LR 2.5. This means you can open full raw files in LR 2.5, but colors and other aspects of image quality may be off and definitely aren't finalized yet. This preliminary support does __not__ include S-RAW and M-RAW files, i.e., you cannot process them at all using 2.5. If you wish to process your 7D images in LR, I suggest shooting full raw files until final support in LR is available (i.e., a future update). The final support will of course allow you to open all three formats: full raw, S-RAW, and M-RAW.
Eric

Similar Messages

  • .CR2 files won't open in Photoshop CS4

    I recently got CS4 Extended version of Photoshop and need to work on my RAW files, but they won't open. I can see the thumbnails in Bridge and when I try to open them Photoshop says they're "not the right type of document"...so...not sure what to do. I've done a ton of research and cannot figure out why these files are unable to open. I need help!

    I've had the same problem recently and worked on the solution this morning.  I havn't read the full info stream here, but can tell you what finally worked for me today.
    I also have CS4, and recently bought a Canon 7D.  My .CR2 files would not open, due to proprietay issues with the new camera.
    I first had to buy a download of WinZip, since I wasn't able to open any download from Adobe.  The WinZip was about $30.  Next, I went back to Adobe/downloads/updates and used Find Product Updates menu.  I found the compatable update of RAW plug in was 5.7 for our CS4 version.  I clicked the link to this download, and began the process by clicking Save.  I then went to the Download folder and found the file from Adobe in the WinZip folder.  At this point I went back to the Adobe download site and printed out the download instructions concerning where to find the old plug in, what to do with it, and how to install the newer downloaded plug in. 
    After all this, I opened CS4, Bridge, located my first .CR2 file, and it worked just fine.  I was also able to convert these .CR2 files, once opened, to DNG files.
    Hope this helps.

  • I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    Many Thanks, Kurt.
    I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
    I shall save it somewhere VERY safe now in case this happens again …
    You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
    Best wishes
    OllyanDinah

  • Error maximum number of files already open error.No Other files can be opened or printed until some are closed

    Hi everyone,
    While opening a file in Adobe reader 10 in Windows 7,I am getting the error as
    "The maximum number of files are already open.No Other files can be opened or printed until some are closed."
    Can Anyone help or suggest a setting for this ?
    Thanks in Advance
    Omkar

    Hello omkar841987,
    Could you please let me know how many files have you opened simultaneously.
    This count will include files that are being displayed as well as opened (without being shown in the viewer).
    Using Reader, you cannot make any setting for the same, but close some of the files before crossing that limit.
    It also depends on your OS and memory size as you would need enough memory to open many files at a time.
    Regards,
    Anubha

  • I can't open PDF files, can't open, update, or download Adobe Reader ( I had it until recently) and don't have an "edit options"

    I can't open PDF files, can't open, update, or download Adobe Reader. (I had it until recently.) None of the "helps" seem to help. I can't even open Adobe Reader now.

    Ignore the instructions about "edit options", to install Adobe Reader download the installer from http://get.adobe.com/reader/ and run the installer. Alternatively, a direct link for the latest version of Adobe Reader is:
    http://ardownload.adobe.com/pub/adobe/reader/win/9.x/9.3.4/enu/AdbeRdr934_en_US.exe
    The following article should help you set it up - [[opening PDF files within Firefox]].

  • We are using CSS 6 (not Cloud) for our yearbook. Starting today pages are giving message that we are missing a bunch of plug-ins so files can't open. How can I get these plugins? Why is this happening?

    We are using CSS 6 (not Cloud) for our yearbook. Starting today pages are giving message that we are missing a bunch of plug-ins so files can't open. How can I get these plugins? Why is this happening?

    We are using CSS 6 for our yearbook. Starting today pages are giving message that we are missing a bunch of plug-ins so files can't open. We are 2 weeks from printer deadline so thia has to get fixed fast. We didn't update anything with the program. We ca

  • Content generation error. Please confirm the file can be opened in InDesign?

    I have been trying to upload a couple of files to a folio that was built yesterday, everytime I try to upload one of them I recieve the error message "Content generation error.Failed to open the InDesign file. Please confirm the file can be opened in InDesign." I have no idea why this is happening as one of the files was successfully uploaded to the folio yesterday and I have not made any changes to it since. I have a also restarted and trashed InDesign preferences so there are no problems there. If anyone has any answers or has experienced any similar problems could you please let me know.
    Thanks
    Adam Flanagan

    That was the first thing I tried because obviously I wanted to find out if it was a problem with my file or a general issue with all uploads to that folio. It seems to be working ok now, although I still have no idea what the problem was and I have never seen that error message before :s
    Thanks for your response.
    Adam

  • Cr2 files will not open in cs6

    I am running os10.6.8 and recently upgraged to cs6 from cs5. I have checked for software updates and my version is current. when I (attempt) to view in bridge or try and open cr2 files in the latest photoshop it will not allow. I can only see the cr2 icon but no image. HOWEVER -  I can view/open the files in my previous photoshop version (5) with no problem. I have seen reference to 'patches' without explanation as to how/when those are needed or is this the same as a latest software update? if so, patches sounds alot like a jankey duct tape and twine solution - just friken use the word SOFTWARE UPDATE - I think that is pretty clear.
    Secondary question - I did a 30 minute search on this discussion board and found nothing. I don't understand how that can be, as I am sure this is a common problem.
    stanks!
    johnyboy

    http://labs.adobe.com/downloads/cameraraw7-4.html
    FYI, Camera Raw versions and supported camera makes/models are listed here:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    The Canon 5D MkIII was first supported in Camera Raw 4.1 *.
    * My error (as correctly pointed out by Noel in post #6): Camera Raw 7.1 (Lightroom 4.1)
    (@Noel: no confusion on the 5D Mk III (it's my dream camera, one day) - just quoted the wrong column on the supported cameras page :-)

  • Cannon Rebel XS EOS CR2 files won't open in CS6

    My photoshop is completely up to date, my RAW plug-in is up to date, and I even attempted to download the DNG converter all to no avail. No matter what I try my CR2 images won't open in anything. My camera is listed as one of the supported cameras. I've tried everything I could find on the forums and on other searches but still cannot get my files to open in Photoshop. The worst part is that they were opening last week prior to my updating. Are there any suggestions as to what I can do to get this solved?

    If you have CS2 the latest version should be ACR 3.7.
    ACR 4.x is only for CS3. If you download the 3.7 ACR and install it correctly ( be sure to follow the instructions precisely!) you should be OK.

  • "Recovered" CR2 files will not open in Photoshop CS6

    My son recently completed the National Three Peaks Challenge. Regrettably, having taken loads of pictures, he discovered that one of the CF cards was corrupt. He and his fellow climbers have now paid a company (a considerable sum) to recover these photos and they are all showing as CR2 files. Unfortunately, neither Photoshop or any other program that he has (including Preview) will not open them. The images from the uncorrupted files are fine.
    As you can imagine, he is desperate to get these images back so if anyone has any bright ideas as to where we go from here we would really appreciate it. Thanks in anticipation.

    Thanks for your suggestion, normfb, which I passed on to my son. He has come back with the following answer -
    "Tried the DNG converter, didn't even recognise there was a file in the folder I told it to look in!
    The issue is that no programs be it Photoshop, that DNG converter, Lightroom or Preview are able to recognise that file format."
    Appreciate the idea though.

  • .CR2 files won't open in CS3 on  a new WIN7 'puter

    I just got a new 'puter with WIN7 installed. I installed CS3 and updated ACR to 4.6, (removed the old .8bi, (or whatever it was), file first). I am shooting a Canon 40D BTW...
    I still can't open .CR2 files - I ge something like: "could not complete your request as it is not the right kind of document". They will not open in Bridge or CS3.
    My discussion with tech support left me with "Bridge can't open .CR2 files..."
    My next step, unless someone here can offer something easier/better, is to uninstall CS3 and reinstall.
    Thanx,
    Ron

    Do you see Camera Raw listed correctly in Photoshop > Help > About Plug-in?
    Don't re-install until you've tried resetting all three sets of preferences and purged the Bridge cache.

  • .CR2 files won't open with Elements 9 plug in

    I get the following error message when I try to open .CR2 files:  "Unable to use the Camera Raw plug-in.  It is not compatible with this version of Photoshop Elements".
    I'm using PSE 9.0.3 with Camera Raw 6.5 plug-in installed on Win7 32bit PC. The photos were taken with a Canon Rebel T3i which is on the compatibility list.  The camera was just purchased in January and this is the first time I've tried to open RAW.  I used the update inside Elements to make sure I had the most recent version of Elements and the plug-in.  Can anyone tell me what I'm missing?
    Kaye

    The 6.4.1 installer download seems to be the correct one.  I was asking about the 6.5 installer, since that is the one that seems to be in place when you get the error message, whether it was the PS version and somehow PSE knows.
    After your 6.4.1 install fails you might run the Adobe Support Analyzer to see if it finds any troubles:
    http://www.adobe.com/support/loganalyzer/
    You can try to search your entire hard-drive for Camera Raw.8bi and find all such files to see if they are all the same size and date or if some are older or newer, and post what you find, where. 
    Some of these files may be under hidden folders so you may need to go into your Explorer / Tools / Folder Options / View tab  and enable Show hidden files folder a drives.

  • Recovered CR2 files won't open with CS3

    Hey, I need help with this!
    I worked in a photoshoot with a Canon EOS Rebel XSi and SD memory; then I had troubles trying to download them because the memory wouldn't let me do it, so I used the 'PC Inspector Smart Recovery' and I recovered all my CR2 files indeed. BUT! some of them won't open with Photoshop CS3, most of them do, but there's just some others that won't open and I really need to get this job done
    My camera files always worked perfectly with photoshop CS3, plugins are installed, I really don't know what went wrong.

    I am having a similar problem.  I downloaded CR2 files from my camera to my computer and CS3 Bridge will not recognize the files, allow me to open in Camera Raw or open in CS3 Photoshop.  I also stuck the same memory card in a Lexar mem card reader and attempted to download to my Mac in CS4 Bridge and that version of Photoshop and Bridge won't recognize the files either, however the CR2 files do appear, where I can view the thumbnails, in iPhoto.  All original files are still on the memory cards (4 cards worth of wedding photos!).  I've downloaded Camera Raw updates for both cs3 and cs4 on my windows pc and my mac and still no luck.  I'm at my witts end! Help! 

  • Cr2 files won't open I have PS CC and the latest CR update available.

    I have a Canon Rebel XS, a fairly old camera.
    It writes a cr2 file and PS won't open it.
    PS shows a link tat says update CR and I have the latest update available.
    Running PS CC and have the latest update.
    MBP OS 10.9.3 with the latest CR update.
    Does anyone have an answer for this prob?
    Thanks in advance!
    R

    cr2 files won't open I have PS CC and the latest CR update available.
    I have posted a file on DropBox at: Dropbox - _MG_7302.CR2
    Can anyone open it with DNG converter or Photoshop?
    Neither of them work on mine.

  • CR2 files will not open in CS4 or Bridge.

    I can not open CR2 file in CS4 or Bridge. The CR2 images show in the preview window when I click the "open" button under "file". When I select the image to open I get "Unable to complete your request because it is not the right kind of document." I have uninstalled and re-installed the sotware, installed all the updates and get the same results. Any sugestions?

    dans2art wrote:
    I can not open CR2 file
    From which Canon camera model exactly?
    The CR2 file is probably from a newer camera and probably requires Camera Raw 6 or higher.
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    CS4 is only compatible with Camera Raw up to version 5.7
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    You either have to upgrade Photoshop to version CS6 or higher
    Or convert the CR2 file to DNG using the free DNG converter then edit the DNG files in CS4.
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

Maybe you are looking for

  • Black ink cartridge on photosmart printer 7250 not working

    the black ink cartridge on my photosmart 7250 printer is not working.  I've tried everything.  I've aligned the cartridges and tried reprinting several times to see if the ink cartridge will start printing.  Everything has failed.  Does anyone know h

  • Premiere CC 2014 not completing an export of h.264 or quicktime video

    Hi everyone, Did anyone experience this before? The export seem to stop indefinitely after 1 or 2% never at the same time and its happening when I export with the following export settings: 2014-11-26_0628 - Webamp's library on CC 2014.1 and the last

  • Folder with question mark after unpartitioning hard drive

    I am running Snow Leopard on my Mac Book Pro.I unpartitioned my hard drive with Boot Camp. Now when I start up I get a folder with a question mark (not a flashing question mark) and then the apple logo. I repaired the disk permissions but there is no

  • Changing Oracle Home Directory

    I accidentally installed 8i Lite in the worng directory. How can I re-install it in another directory?

  • Scheduling Process flows in scheduling tool Control M

    Hi, We need to schedule 3 to 4 process flows through the general scheduling tool "Control M". So how do we do this? I mean where should we login to run the OWB jobs (Process Flows) through Control M. Any help will be appreciated. Thanks, Harsha