7d CR2 files won't show in Bridge CS4

I've run updates through Photoshop and Bridge trying to get my 7D photos to show as thumbnails in Bridge. They simply won't show and I can't find a way to make them show. When I try and open a CR2 file, the image opens in ACR 5.7, which i know isn't the latest version, but when I try to run updates again, it tells me there are no updates to install. Help!

clearyjohnp wrote:
…I found my CS4 had ACR v5.2...so I downloaded the v5.6 update…
You should be running ACR 5.7, not 5.6.
All updates to ACR contain unannounced, unpublished bug fixes and improvements, not just support for new cameras. You should always run the latest version of ACR your version of Photoshop supports.
Wo Tai Lao Le
我太老了

Similar Messages

.CR2 files won't open in Photoshop CS4

I recently got CS4 Extended version of Photoshop and need to work on my RAW files, but they won't open. I can see the thumbnails in Bridge and when I try to open them Photoshop says they're "not the right type of document"...so...not sure what to do. I've done a ton of research and cannot figure out why these files are unable to open. I need help!

I've had the same problem recently and worked on the solution this morning. I havn't read the full info stream here, but can tell you what finally worked for me today.
I also have CS4, and recently bought a Canon 7D. My .CR2 files would not open, due to proprietay issues with the new camera.
I first had to buy a download of WinZip, since I wasn't able to open any download from Adobe. The WinZip was about $30. Next, I went back to Adobe/downloads/updates and used Find Product Updates menu. I found the compatable update of RAW plug in was 5.7 for our CS4 version. I clicked the link to this download, and began the process by clicking Save. I then went to the Download folder and found the file from Adobe in the WinZip folder. At this point I went back to the Adobe download site and printed out the download instructions concerning where to find the old plug in, what to do with it, and how to install the newer downloaded plug in.
After all this, I opened CS4, Bridge, located my first .CR2 file, and it worked just fine. I was also able to convert these .CR2 files, once opened, to DNG files.
Hope this helps.

How to show rating dots and file name underneath thumbnail in Bridge CS4 preview workspace?

How to show rating dots and file name underneath thumbnail in Bridge CS4 preview workspace?

Thank you! That was it. The option to change it is not available in preferences (though I believe it was in early CS versions). It's hidden in a dropdown menu associated with an icon at the top. It sure wasn't easy to find, and I probably would not have done so without your lead. Thanks again!

Raw and CR2 files won't sort by time

I recently shot a wedding with my Nikon while my second shooter shot with her Canon. We made sure the times were the same so that Lightroom could work its organization magic. After I uploaded them, the CR2 files showed up above the Raw files. All of the images are in one folder and I have it set to Sort by Capture Time, but they will not mix together according to their times.
When I uploaded my Nikon images I realized that my year was off. It was set to 2010 instead of 2011, so I changed the metadata accordingly and it changed to the correct year for all of my Nikon images. I uploaded the Canon images after that incident, but they still won't sort by time. Do you think that metadata change has something to do with the images not mixing together or it is the file names?
There are about 1400 images all together it will be quite an exhausting experience to have to organize them myself. So I would definitely appreciate some help!
Thanks!!
Ruth

Check the timezone of each filetype.
The US is several hours behind GMT so if the corrected NEFs are GMT-relative while the CR2s are US-time-zone-relative that could explain the issue, or maybe one camera had timezones set on it and one didn’t and the difference has nothing to do with the metadata correction you did.
Did your metadata correction update the headers of the RAW files, themselves, or just LR’s internal information in its database and/or XMP files?
If the RAW files were modified, check the timestamps with EXIFtool:
http://www.sno.phy.queensu.ca/~phil/exiftool/
If only the LR-stored metadata was modified, not the RAW files, themselves, then create an XMP file for one CR2 and one NEF taken about the same time, using Metadata->Write Metadata to File(s), and examine the two XMP files in a text editor to see what the timestamps and timezones say.

Recovered CR2 files won't open with CS3

Hey, I need help with this!
I worked in a photoshoot with a Canon EOS Rebel XSi and SD memory; then I had troubles trying to download them because the memory wouldn't let me do it, so I used the 'PC Inspector Smart Recovery' and I recovered all my CR2 files indeed. BUT! some of them won't open with Photoshop CS3, most of them do, but there's just some others that won't open and I really need to get this job done
My camera files always worked perfectly with photoshop CS3, plugins are installed, I really don't know what went wrong.

I am having a similar problem. I downloaded CR2 files from my camera to my computer and CS3 Bridge will not recognize the files, allow me to open in Camera Raw or open in CS3 Photoshop. I also stuck the same memory card in a Lexar mem card reader and attempted to download to my Mac in CS4 Bridge and that version of Photoshop and Bridge won't recognize the files either, however the CR2 files do appear, where I can view the thumbnails, in iPhoto. All original files are still on the memory cards (4 cards worth of wedding photos!). I've downloaded Camera Raw updates for both cs3 and cs4 on my windows pc and my mac and still no luck. I'm at my witts end! Help!

Cr2 files won't open I have PS CC and the latest CR update available.

I have a Canon Rebel XS, a fairly old camera.
It writes a cr2 file and PS won't open it.
PS shows a link tat says update CR and I have the latest update available.
Running PS CC and have the latest update.
MBP OS 10.9.3 with the latest CR update.
Does anyone have an answer for this prob?
Thanks in advance!
R

cr2 files won't open I have PS CC and the latest CR update available.
I have posted a file on DropBox at: Dropbox - _MG_7302.CR2
Can anyone open it with DNG converter or Photoshop?
Neither of them work on mine.

Cannon Rebel XS EOS CR2 files won't open in CS6

My photoshop is completely up to date, my RAW plug-in is up to date, and I even attempted to download the DNG converter all to no avail. No matter what I try my CR2 images won't open in anything. My camera is listed as one of the supported cameras. I've tried everything I could find on the forums and on other searches but still cannot get my files to open in Photoshop. The worst part is that they were opening last week prior to my updating. Are there any suggestions as to what I can do to get this solved?

If you have CS2 the latest version should be ACR 3.7.
ACR 4.x is only for CS3. If you download the 3.7 ACR and install it correctly ( be sure to follow the instructions precisely!) you should be OK.

Canon CR2 Raw files won't open in Photoshop CS4

I'm using a Canon EOS 600D (aka EOS Kiss X5), Photoshop CS4 (ver 11.0.1) with Camera Raw 5.7.0.213.
CR2 Raw files won't open in Photoshop, though the thumbnails are clearly visible and open in Windows Explorer.
Any suggestions?
Thanks

Yes, absolutely all of the quality and dynamic range is retained in the DNG, because it is still raw data.
Outside of upgrading to Photoshop CS5, which can open your files directly with Camera Raw 6.4.1, your only choice is the extra step of converting the .CR2 files to .DNG with the free DNG converter.
While you'll get all the quality your Camera Raw 5.x converter can deliver, you should keep in mind the Camera Raw 6.x converter has an entirely new, additional "2010 process" for converting raw images, which (depending on your settings) can actually deliver a higher quality conversion than the one you're getting with Photoshop CS4. I think it's worth the cost of the Photoshop upgrade, personally.
-Noel

.CR2 files won't open in CS3 on a new WIN7 'puter

I just got a new 'puter with WIN7 installed. I installed CS3 and updated ACR to 4.6, (removed the old .8bi, (or whatever it was), file first). I am shooting a Canon 40D BTW...
I still can't open .CR2 files - I ge something like: "could not complete your request as it is not the right kind of document". They will not open in Bridge or CS3.
My discussion with tech support left me with "Bridge can't open .CR2 files..."
My next step, unless someone here can offer something easier/better, is to uninstall CS3 and reinstall.
Thanx,
Ron

Do you see Camera Raw listed correctly in Photoshop > Help > About Plug-in?
Don't re-install until you've tried resetting all three sets of preferences and purged the Bridge cache.

.CR2 files won't open with Elements 9 plug in

I get the following error message when I try to open .CR2 files: "Unable to use the Camera Raw plug-in. It is not compatible with this version of Photoshop Elements".
I'm using PSE 9.0.3 with Camera Raw 6.5 plug-in installed on Win7 32bit PC. The photos were taken with a Canon Rebel T3i which is on the compatibility list. The camera was just purchased in January and this is the first time I've tried to open RAW. I used the update inside Elements to make sure I had the most recent version of Elements and the plug-in. Can anyone tell me what I'm missing?
Kaye

The 6.4.1 installer download seems to be the correct one. I was asking about the 6.5 installer, since that is the one that seems to be in place when you get the error message, whether it was the PS version and somehow PSE knows.
After your 6.4.1 install fails you might run the Adobe Support Analyzer to see if it finds any troubles:
http://www.adobe.com/support/loganalyzer/
You can try to search your entire hard-drive for Camera Raw.8bi and find all such files to see if they are all the same size and date or if some are older or newer, and post what you find, where.
Some of these files may be under hidden folders so you may need to go into your Explorer / Tools / Folder Options / View tab and enable Show hidden files folder a drives.

Some PSD files won't display in Bridge

Why is it that some PSD files won't display a visible thumbnail in Bridge?
Don

I tried Curt Young's suggestion in the Bridge forum:
When in the folder with the problem click on Tools/cache/purge cache for folder xxx. The thumbnails will be then rebuild and see if that solves the problem. Let all the thumbs rebuild completely (spinning arrow on bottom left corner will stop) before carrying out any other operation. You may have a few corrupted files in the cache.
It worked!

Finder all my files won't show microsoft documents

Since installing Yosemite on my Macbook Air, when I open the finder window to see my recently opened files (all my files), it won't show any word or excel files; only pictures and pdfs. Can anyone help me to fix this?

Since installing Yosemite on my Macbook Air, when I open the finder window to see my recently opened files (all my files), it won't show any word or excel files; only pictures and pdfs. Can anyone help me to fix this?

Canon 7D Mark II files won't open in bridge or photoshop

I am using photoshop CS5 and purchased a canon 7D Mark II and my files won't open. I updated to the photoshop 8.7.1 and my files still won't open. How do I fix this?

gregh57206245 wrote:
…I updated to the photoshop 8.7.1…
Assuming you mean ACR (Adobe Camera Raw plug-in) 8.7.1, not "Photoshop" what you write makes no sense.
ACR 8.7.1 needs at least CS6 to run. You will never be able to open your raw files from that camera directly in CS5. There will be no further updates for the obsolete, unsupported CS5 applications.
You have to go the free, stand alone Adobe DNG Converter 8.7.1. Locate it, download it, install it and then launch and run it on ever folder of raw files to convert them to raw DNGs you can then open in your CS5 setup.

CR2 files won't open

I have CS3 on Windows 7, and a canon 6d. I cannot open my CR2 files. Every time I try it says that it can't open because it's not the right type of document. Please help. I fear that I will need to buy a newer version of photoshop, but it would shock me if I couldn't just update it somehow. Thanks.

Hi,
Unfortunatly photoshop cs3 can't use the camera raw plugin required for the canon 6D camera raw files.
(requires camera raw 7.3 and photoshop cs3 only can go to camera raw 4.6)
Besides upgrading to photoshop cs6 you could use the 7.3 DNG Converter to convert your 6d files to dng copies which photoshop cs3 should open
or consider lightroom, which is cheaper than photoshop cs6.
7.3 DNG Converter:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5519

Flash file won't show

Hi there,
I upgraded to CS3 last week and updated some copy on the page
below. Only just noticed, that the Flash file isn't showing up on
the page anymore. Any idea why?
PAGE
LINK

Don't. Put the script back in. It works fine *IF* you also
upload the
Scripts folder, as you are told by DW when you initially
insert the Flash on
the page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"unknown72" <[email protected]> wrote in
message
news:f9uotr$9ge$[email protected]..
> Found the solution after reading another thread on here.
Apparently, the
> new
> version of Dreamweaver automatically adds a script now.
I deleted the
> script
> and it works fine now...
>
>
> "<script type="text/javascript">
> AC_FL_RunContent(
> 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#
>
version=9,0,28,0','width','400','height','335','title','Map','src','/images/new/
> events/donations/map','quality','high','pluginspage','
http://www.adobe.com/shock
>
wave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','/images/new/
> events/donations/map' ); //end AC code
> </script><noscript>"
>
>

7d CR2 files won't show in Bridge CS4

Similar Messages

Maybe you are looking for