[7Pro] [Acro Pro XI] After Started Acro Pro XI, AcrobatPro XI quit without message after 20 secondes

[7Pro] [Acro Pro XI] After Started Acro Pro XI, AcrobatPro XI quit without message after 20 secondes
Hi All,
See the resume in the title..
[7Pro - 32Bits] [Acro Pro XI] After first Started Acro Pro XI with last Update v11.0.9 (no PDF files opened.. just Acro Pro XI application), AcrobatPro XI quit unexpectedly without message after 20 secondes
I've in first :
Uninstall Adobe Reader XI then Un-install Acrobat Pro XI then restart the computer then Install again only Acrobat Pro XI then restart the computer..
Try to start the Acrobat Pro Application after downlaod the last update (v11.0.9)
Same behavior : Adobe Acrobat Pro XI quits unexpectedly
I've tested also to start in Administrator mode but it's the same result..
Have you any idea or direction for find a solution please ?
Thanks a lot by advancing
Best Regards
Pierre Jarrige

Hi All .................................................
So, Today I've decide to Un-Install Adobe Acrobat and Reader Products.
Use The Acrobat Cleaner Tool for Acrobat Pro and Reader for deleted prefs, registry etc....
restart he computer then update all firmware of the computer DELL OPTIPLEX 380
Restart again the computer then Install in ADMINISTRATOR mode Acrobat Pro XI
Then download manually the updater 11.0.9 and install it just after
Restart a new time ..
Start Acrobat Pro and bad result .... Acrobat Pro quit unexpectedly after 20s for his first start without document open
Why nobody give an idea or answer ????
Thanks by advance
Pierre

Similar Messages

On starting up, my macbook pro shuts down after 25 seconds of booting up.

Hi there. On starting up, my macbook pro shuts down after 25 seconds of booting up. The time bar comes on for a while before it simply goes blank and switches off without any notification. Battery iappears charged. Could it be a virus? Help please!! O

Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

After updating my software from snow leapord to mountain lion my MacBook Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone help

After updating my software from snow leapord to mountain lion my MacBook Pro suddenly keeps shutting down without any reason no warning suddenly just restarts... Can someone hel

Note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis.

Acrobat Pro 8 Crashes after 7 seconds.

Does anyone know which of these updates causes Acrobat Pro 8 Crashes after 7 seconds.
My OS is Windows 7 Ultimate x64 SP1:
Thank you.
Harry.

AA8 is not certified for Win7, and particularly the 64-bit version. Several folks have been successful on the install on 32-bit systems. I have heard of 2 folks who claimed success on the 64-bit system. To have a change, first check to be sure you have Acrobat, Distiller, and the Adobe PDF printer on your system. Since Acrobat is not opening, go to http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and download the updates (start with the latest and work backwards. Each update screen will tell you the previous one needed for the update (you may be able to skip 2 or so). Once done start the updates from the bottom up. You should do the updates through 8.3.1. Generally speaking you only need to do a reboot after the final update installed, not for all the updates.
The updates are definitely required for the 64-bit system and may be the issue you are having. There is no way to be sure if the install will work, only the comments by others that have tried.
During the installs and updates, be sure you are logged in as the adminstrator and have anti-virus disabled.

I am having an MacBok Pro 13inch,having an Startup Problem, the time i press the power button after few seconds the apple symbol appears w/a loading sign below it

i am having an MacBook Pro 13inch , having an Startup Problem , the time i press the power button after few seconds the apple symbol appears with a loading sign below it and wont go further ahead of it . My data is all in the hard drive .. . I even tried the Internet recovery but no use !!!! but still no respons and the recovery and macintosh hd is now lock! but earlier only the recovery is lock and after both of them is lock. i can reinstall,... and i didnt try to back up any data bec i dont know how? so please help me to resolve my prroblem.?

luoie wrote:
This thing happend,, it say Disk utility stopped repairing "Macintosh HD" disk utility can't repair this disk
Sorry, possibly you need a new hard drive or try reformating. First
you can try something like http://www.alsoft.com/diskwarrior/ it has been known to repair disk that DiskUtility could not. YMMV and they don't give it away.
If Disk Warrior can not repair then you need to Reformate the drive. Make sure you have a back-up in place no matter what.
http://www.apple.com/support/backup/
Disk Utility will tell you something about it's SMART status:

Logic won't start! I got the message "Logic Pro 9 did suddenly quit!

Hi.
I had the same problem with Garageband a while ago...
Now its time again!
When i used Garageband, i downloaded cubase on my mac. And after that when i was tryed to open Garageband i got the message "Garageband did suddenly quit" (Translated from swedish).
And now i installed Ableton Live Trial version and i got the same message "Logic Pro 9 did suddenly quit!
PS: I have uninstalled the Ableton Live (I think... if i did it the right way)
Help!!!
Info:
Logic Pro 9.1.0
Snow Leopard
Operative system: The newest xD *** do i know? :P
Thanks.
Message was edited by: bohus

Ok so i figured it out. I will explain if any one had the sam problem... Follow
Finder/Macintoch HD (Your Harddisk)/Library/Applications Support/Propellerhead Software/ReWire/And Delete MelodyneEssentialReWireDevice.plugin (8.4 MB)
Hope it will help.

My MacBook Pro doesn't start; in safe mode shift CMD V the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this?

My MacBook Pro doesn't start; in safe mode <shift CMD V> the message "disk0s2: media is not present" is written on the screen repeatedly but the MacBook doesn't start. Do you have any ideas of why this should be or what I should do to resolve this? Thanks Eamonn

Thanks for these suggestions: I have tried safe mode re-starts (both "verbose" and simple "shift" + power) to no avail. I get the error message "disk0s2: media is not present". Following this I inserted the installation disc and from there ran disc utility. The "Verify Disk" indicated an error " invalid sibling link" which it could not repair.
I also tried to completely re-format/erase the disk, but again got an error message "disk object invalid or unable to serialize".
Any ideas of what could be causing this or the best solution? I fear I am fast running out of options.

Acrobat XI Pro automatically closes itself with no messages etc. after few seconds

Greetings all,
I don't know why but my Acrobat XI Pro (11.0.0) automatically closes itself (with no warning, no messages etc.) after few seconds. I installed the AXI as a part of the CS6 Master Collection on my Windows 8 (x64) laptop. Just as suggested at some other posts in the forum:
I checked the "security settings (enhanced)" tab but the protected view option is already off.
I searched for the eula.exe under the "Program Files (x86)\Adobe\Acrobat 11.0" folder but there is no eula.exe. May it be not present because I installed it as a part of CS6 Master Coll. package?
I am using Eset Endpoint Antivirus as a third party Anti Virus Software.
The problem occurs when:
I open up a pdf file from outlook etc.
I manually open a pdf file from windows explorer
I open adobe acrobat with no file to view
As I mentioned above, I see no error messages or warnings during the closing down. It acts as if I clicked the close button on the top right corner. I know that there are a lot of posts in the forum about this issue, but none of them helped me to solve my problem. I would be glad if you can help me with this problem.
Thanks,

Hey i was having this issue also with Adobe Acrobat pro... it only seemed to be affecting one program that produced PDF output automatically. When the processes finished the PDF is supposed to be displayed and instead it would rapidly flash across the screen and close. THen i would have to hunt for the PDF to review its content. I tried a couple of things like deleting my preferences for acrobat C:\Users\[your user name]\AppData\Local\Adobe\Acrobat\10.0. You might have to show hidden files. In the explorer window select Organize-> Folder and search options-> once that opens view -> check show hidden files, folders and drives. then navigate that path above. Make sure adobe is closed then delete everything in there or move it off to another folder if your worried it will break it further.
That did not fix the problem though. I opened the application and ran my process again same results (adobe closes pdf auttmagically). so i opened adobe acrobat and navigated to Edit -> Preferences -> look under the General tab and click the select default PDF handler and that seemed to fix my problem. I also disabled the enhanced security look further down in that list under security enhanced. then a reboot so it is possible that the enhance security setting was the cause i think i will play with that for a minute to see if it was but i think my issue was the default handling. good luck

New MacBook Pro Disconnects from OS X Server VPN after 60 seconds

My Old G4 Laptop and my Dual G5 Tower both connect to my office via L2TP VPN without an issue. with the exact same settings exported over to my mac book pro, the connection drops after exactly 60 seconds. I've tried both wireless and wired connections, and in either case, the VPN drops after 60 seconds of connect time.

I have exactly the same problem with a new iMac Duo Core 20". It disconnects after 60 seconds no matter what I try. With other Macs (non of which are Intel) I have no problems what so ever.

Macbook Pro 13 turns off after few seconds.

When I turn MacBook pro 13 on sound play and fans run at full speed but it runs turns off after few seconds.

Correction:
When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
- MacBook does not work on batery - evenif i disconect batery - no result
- I try with diferent power adapter - no result.

Apple Mac book pro just turns off after few seconds after turning on

Hi Folks,
I just turned on my Apple Macbook pro. Whenever, I turn it on, the progress bar comes with the Apple symbol and after few secs, it turns off by itself. Have tried to turn on the MBP number of times but the same result
Please help...
Regards,
Nadeem

Correction:
When I turn MacBook pro 13 on sound play and fans run at full speed but it turns off after few seconds.
- MacBook does not work on batery - evenif i disconect batery - no result
- I try with diferent power adapter - no result.

Acrobat 9 Pro Extended autoclose after 10 seconds

When I open acrob, it seems ok but after 10 seconds it closes. Does somebody know why ?
Thank You

You have an activation issue. When you launch the program it is going out to check on activation. This is failing and so the program closes. The solution to your issue most likely lies in the TechNote below:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528
Ignore solution #1 as you are using Acrobat 9. Start with solution #2. Good Luck!

Is it possible to update QT 7 to higher version? I ran the update once and all the Pro features were disabled with the message: Your Reg Key is for QT Version 7 only, I had to reinstal Win after updating, because the new QT kept the reg with no pro func

Is it possible to update QT 7 to higher version? I ran the update once and all the Pro features were disabled with the message: Your Reg Key is for QT Version 7 only. I uninstalled the new QT version, and reinstalled the old QT 7 but the Pro functions were still unavailable, so , I had to reinstal Windows to get my Pro functions back. This happened quite a while ago, but every time I get the "Update" message, I am afraid to launch it.

All I can say is that the problem you experienced is not by design but was instead some sort of technical fault, either in QuickTime or in Windows. I've upgraded QuickTime for Windows a number of times, to various new versions of QuickTime 7, and it's never removed my Pro key. My guess, and this is strictly a guess, is that something corrupted the preference file where the Pro key is held, disabling the Pro features and not allowing you to re-enter your key. Since you reinstalled Windows, I would expect that future updates to QuickTime will go without problem, and if for some reason the Pro features are ever removed, re-entering your Pro key should get them back.
Regards.

I plugged my IPhone 4S into the usb on my MacBook Pro and I sent a text message on my phone, my MacBook shutdown and won't re-start

I plugged my IPhone 4S into the usb on my MacBook Pro and I sent a text message on my phone, my MacBook shutdown and won't re-start

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

I have a mid 2014 13' retina display MacBook Pro that went into kernel panic twice, the trackpad froze, and after the second kernel panic it will not turn on. This is a two month old laptop with no history of problems. Any ideas?

I purchased it in December and three days ago it kernel panicked twice. After the second event, it will not boot at all. The charge cord is green when it's plugged in and seems to indicate the battery is fine. When it went into kernel panic, the trackpad locked up. I had a technician open it up to see if there were any obvious issues and everything looked ok visually. I can't boot it into safe mode or anything involving powering the machine on, as it is not responding to anything. I have a major test coming up in five days that I am taking on this laptop and am desperate for answers. Any information you can offer at all would be helpful.

Try SMC and NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
Then try a safe boot again:
http://support.apple.com/en-us/HT201262
Ciao.

[7Pro] [Acro Pro XI] After Started Acro Pro XI, AcrobatPro XI quit without message after 20 secondes

Similar Messages

Maybe you are looking for