7th Gen iPod Classic was unplugged during sync, now it pops up in Windows Explorer, but not iTunes. How can I fix this?

Okay.
I have a Windows 7 x32 OS, and an 80gb Silver 7th Gen iPod Classic.
So, I bought an iPod used off of eBay and I recently decided that 80gb was a bit too much, so I was going to resell it on eBay and buy a smaller iPod.
While I was restoring it to set it back to factory settings, my computer shut off due to a power problem.
Now when I plug it in, I get a message from windows saying "You need to format the disk in drive :M before you can use it. Do you want to format it?"
It shows up in windows explorer as a Removable Disk, and it isn't being detected by iTunes. I plug it in the iPod says "Connected. Eject before disconnecting." with a symbol that it makes when it is syncing.
I've tried putting it in disk mode, and it still will not detect it.
Can somebody help me? I really don't want to be stuck with a broken iPod.
If anyone needs or wants any more information before they can advise, please feel free to tell me what you need to know and I will post it!
Thanks, and have a blessed day.

Hello b0nvivant,
Thank you for providing so much information about the iPod issue you are experiencing.  I found an article with steps to take when your iPod is recognized in Windows Explorer but not in iTunes:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • So i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over  wifi or when connected to itunes. how can i fix this?

    so i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over  wifi or when connected to itunes. how can i fix this?

    You say you have iOS 7 beta. If you are a developer you have access to the private OS 7 developer's forum
    iOS 7 Developer forum- Apple Developer
    Otherwise you are on your own since you have a bootleg copy
    PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog

  • The hotmail address i use for my apple ID was hacked and i no longer have access to it, this is stopping me from accessing any of my icloud or itunes. how can i fix this?

    The hotmail address i use for my apple ID was hacked and i no longer have access to it, this is stopping me from accessing any of my icloud or itunes. how can i fix this?

    Thanks, I appreciate the help.  I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

  • Since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

    since installing Lion I keep getting the error message 'there was a problem connecting to the server. URLs with the type 'file:" are not supported"' How can I fix this?

    A Davey1 wrote:
    Not a nice answer!
    Posting "Check the 'More like this'" area and not simply providing the answer is a great way to make these groups worthless.
    You're ignoring context.  On the old Apple Discussion Groups I never posted replies like that, instead giving people relatively detailed answers.  The new Apple Support Communities made things worse by introducing certain inefficiencies.  Then came Lion.  The flood of messages that came with Lion required a painful choice for any of the people who had been helping here: (1) Give quality responses to a few questions and ignore the rest.  (2) When applicable, give a brief answer such as the one that you found objectionable.  (3) Give up all the other normal activities of life and spend full time trying to answer questions here.
    People who needed help with Lion problems seemed to have trouble discovering existing message threads that described how to solve their problems.  I never posted the suggestion of "Check the 'More like this' area" without verifying that the help that the poster needed could be found there.  Even doing that, what I posted saved me time that I could use to help someone else.
    The people helping here are all volunteers.  None of them is being paid for the time they spend here.  They all have a life outside of Apple Support Communities.  It's arrogant of you to demand that people helping here spend more time than they already do.

  • My ipod touch 3rd generation jumps hrough tracks whilst streaming music over bluetooth to a sony device how can I fix this?

    When streaming music over bluetooth from my 3rd generation ipod touch to a sony device it jumps every 10 seconds and not just when moving or anything other devices do not do this just the ipod how can I fix this?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset the Sony device
    - Unsync all music and resync
    - Reset network settings: Settings>General>Reset>Reset Network Settings. You will have to repair the device and rejoin all wifi networks
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My ipod will not respond to anything. I tried to restore but unable to how can I fix this?

    Itunes suggeested that my Ipod was coruppted and to restore I tried this and it uploaded software and tried to restore but an error message came back (I did not save the error message). I tried to look up how to resotre and when it shows to hold the menu and the on/off on the wheel for 6 seconds nothing happens just a black screen no indication that the Ipod is on or off. How can I restore this?
    The error is an unknown error 1437

    I wrote this few years ago, see if this still helps
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • I have been unable to sync my phone with itunes - how can I fix this?

    When I link into itunes, I am told that my phone is not registered.  I have had my phone for less than 6 months.  It worked through the itunes up until May and then I was unable to get it to connect to sync with itunes.  I am able to buy products but not share with my other devices.  How do I fix this?

    The actual error message reads :  This Iphone can non be used because the Apple mobile device sevice is not started.

  • My new ipod shuffle doesnt recognised by my latest virsion of iTunes how can I fix this?

    my new ipod shiffle doesnt recognised by my latest virsion of itunes how should i solve this issue?

    Hi psaffarzadeh,
    Welcome to the Support Communities!
    I can't tell from your post if you are working with a Mac or PC, so I'm including troubleshooting steps for both:
    iTunes: iPod not recognized in iTunes and Mac desktop 
    http://support.apple.com/kb/ts1410
    iPod: Appears in Windows but not in iTunes 
    http://support.apple.com/kb/TS1363?viewlocale=en_US
    I hope this information helps ....
    - Judy

  • IPod Touch shows up on My Computer, but freezes iTunes, and does NOT show up on iTunes, how can i fix this?

    I have honestly spent countless hours trying to fix this, I FINALLY got it to show in My Computer, driver is updated, I have re-installed iTunes numerous times, recently did a FRESH Windows 7 Ultimate re-install, i can't restore the iPod (because it has been restored, and I can't even access it via iTunes) My iPod is NOT broken, it works on my laptop fine, it shows up on iTunes and My Computer, no problem. However, I need to use my iPod on my main computer for songs (iPod's practically new by the way) Like my question states, my iTunes freezes up, and it's very strange because it freezes, then a couple minutes later iTunes works fine, BUT my iPod doesn't show up on the side like it's supposed to. I've done everything, I hope I get some good support, thanks in advance!
    ~Thomas
    Edit: I have the latest update for the driver, and iTunes, iPod has 4.3.3
    Message was edited by: Havocks

    http://support.apple.com/kb/TS2972

  • My iPod nano (newest version) screen lights up but does not work how can I fix this?

    Need help please!!
    I have an iPod nano, the newest version, it turns on, noticeable by a light that appears however it doesn't show the icons etc that the tactility of the iPod nano offers.
    Does anyone know how to fix this?
    Any help would be greatly appreciated,
    Thank you for your time

    Did you already try to reset the iPod?
    How to reset an iPod nano (6th generation)
    Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step.
    If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer. Make sure the computer is turned on and isn't set to go to sleep. Try resetting the iPod while it is connected to power.

  • My iphone 4 will only sync certain songs and album from my itunes, how can I fix this?

    I have an iphone 4, and when I go to drag stuff to sync it to the phone it will only sync certain albums or songs, and not others. Mind you, these bands it will not sync now I have had on the phone in the past so I do not understand whats going on, I've tried redownloading Itunes, and factory setting my phone and none of which have seemed to work if someone can help that would be awesome!

    i had the same problem and just figured it out.
    plug in your iPhone and click on your phone under Devices in iTunes.
    then, at the top, where it says "Summary, Info, Apps, Music, Movies, TV Shows, Photos" click Music
    make sure the "Sync Music" box is checked along with "Entire music libary" and apply the changes.
    mine wasnt checked and it only had 37 songs in my phone out of 927 that were on my iTunes.
    hope that helps!
    (also make sure your AutoFill doesnt have any weird settings.)

  • My ipod nano 7th gen. won't save the changes I make to a song's start and stop time. How do I fix this?

    So I have a few songs that I don't like the intro to or the end of it that I had cut to where I wanted on my previous ipod. When I try to do the ame thing with this one with the start and stop time, it will work for awhile and then randomly start and stop where it had originally. I have done it like 4 times now for some songs and I can't seem to get it to stick. Suggestions?

    If you use the Sync feature in iTunes, then it needs to be done to the song in your Music Library, then synced with the iPod.  If you do not use the Sync feature and are performing the changes to the song on your iPod specifically, then the setting may be getting overwritten when you drag the song that's already on the iPod back onto the iPod.  It will overwrite all local settings for the song on the iPod with the settings in your library. 
    Try performing the changes to the song in your music library, and then dragging it back over to your ipod (or Sync your iPod if you use that feature).  This will make sure that the setting are consistent in both your library and iPod in-case you were to ever overwrite the song once more.

  • When I add songs to my iPod, they go on there. But when I disconnect my iPod from the computer and plug it back in the songs never stay on there. How can I fix this?

    Just recently I've noticed my apps wasn't working, they would just blink and then exit out. So I searched on here to find out what I should do, and I seen that someone said to restore the iPod. I did just so, but before I did I made sure I backed it up so I still had my files. But when I plugged it in there was no option of restoring from backup. I didn't know why, but I just added all of my old songs from before. However, when I unplug it (after my songs have been added) and plug it back in.. My songs aren't there anymore! This is very frustrating because it's done this to me 3 times and I'm not sure what to do.

    The same thing happened to me when I updated to the new software when iPhone 4S came out. 

  • I'm having an issue with songs cutting off before finishing and jumping to the next one. Even on my old ipod where there were never any problems before. They play fine on my computer? how can I fix this without spending a fortune replacing all these songs

    I got this new Ipod for christmas,& I started importing songs before it was fully charged. I thought thast caused the problem till I added new songs to the old one. Then it started doing the same thing. The old one never had this problem. Even one of the new songs I just bought stops 15 seconds in then jumps to the next song. I can't afford to replace them all.

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
      - Restore to factory settings/new iOS device.

  • My iPod Touch 4G says my social security code is invaild but it's NOT. How Can I fix this problem?

    I keep on trying and it says my social security code is INVAILD. It wont let me download any apps or update them. If this has happened to you and you found a solution to this PLEASE I BEG OF YOU TO HELP ME!!!

    IM HAVING THE SAME PROBLEM!
    HERE IS WHAT APPLE SUPPORT WROTE ME!
    Dear Raheem,
    Welcome to iTunes Store Customer Support. My name is Jeyaraj and I am glad to assist you today.
    I understand that you are unable to download the app and received a error message saying "Theres a Billing Problem with a Previous Purchase". I know how eager you are to get this taken care of and I will do my best to resolve this for you.
    Raheem, sorry for the inconvenience caused and I would like to inform you that there is a billing issue with one of your iTunes Store orders and you are unable to resume purchasing with your iTunes Store account. Unfortunately, the iTunes Store has been unable to verify an authorization from your_financial_institution and has not received payment for order (my order number was here). As soon as this order is paid for, you'll be able to resume purchasing with your iTunes Store account.
    Not being able to verify an authorization is a sign that something needs to be addressed by the issuer of the card. You will need to contact your financial institution to determine the specific cause of the card being rejected.
    When contacting your financial institution, ask to speak with the fraud/security department. The representative will need to thoroughly review your account until they locate and resolve what is causing the issue. If there are holds on your account, those will need to be removed. Please note that your financial institution can also choose to bypass the authorization process.
    Once your financial institution has resolved the issue, you should be able to pay for the order (my order number was here) and resume purchasing. If you are not able to resolve the authorization issue with your financial institution, I recommend trying to add a new credit card or redeeming enough store credit to pay the balance in full.
    I hope this information has been helpful. If you have difficulty paying the balance, please let me know. I will be happy to assist you further.
    Have a nice day!
    Sincerely,
    Jeyaraj
    I HOPE THIS CAN HELP YOU!

Maybe you are looking for

  • LIST OF VALUES not Populating in BPS WEB INTERFACE ( LAYOUTS )

    Hi BI Guru's I have created a WEB interface for BPS in BI ( version 7.0) .  But when i execute this in internet explorer, I do not get the LIST OF VALUES for Material.  When I click on "input help" the system open a new window for "Value selection". 

  • No GR/IR items cleared after GR/IR clearing by F.19 and SM35

    Hi experts, After I execute the GR/IR clearing program through F.19 and then post the batch through SM35, I found the GR/IR open items have not been cleared, even though they match the clearing conditions. I test to create a PO, make the invoice rece

  • Is there any way to download my Mac Mail Contact list (Addressbook)from Snow Leopard to an iPad, or iPhone?

    I have an Intel iMac Model 8,1 Running Snow Leopard (10.6.8), and a 4th Gen iPad. Is there any way that I can import my Mac Addressbook from my iMac to the iPad so that I don't have to manually enter over 1,100 names and email addresses? My installed

  • How to use bapi /external service directly in application service

    Hi I have to use BAPI_ALM--RDER_MAINTAIN in my caf application i have imported it as external service.As there are problems mapping its input fields to entity service , it has to be consumed directly vai application service. But i ahve never done so

  • BP Validation

    Hi all, i am doing BP validations for BP type. Upon validating and there is and error, all screen fields are greyed out hence restricting the user to enter correct data. The only way now is to cancel the transaction and execute it again which is a bi