7th gen iPod not showing up in Windows 8 anymore

7th gen iPod not showing up in Windows 8 anymore. Tried all the apple troubleshooting. Help?

I have tried all the 'Rs' that Apple recommend. As said, I can't hook up the iPod to my computer. I have tried to reset the iPod manually (holding the select and menu button) - but this doesn't work.
If there is another (manual) way to restore the iPod, I would love to hear about it.
As said: as for restoring the iPod - I can't get any contact with my iPod with my computer at all.

Similar Messages

Problems downloading audiobooks from Overdrive [Windows 8] to my IPod Nano 7th gen. Not showing up on the Ipod. Any suggestions?

problems downloading audiobooks from Overdrive [Windows 8] to my IPod Nano 7th gen. Not showing up on the Ipod. Any suggestions?

The iPod's screen indicates that the iPod is connected?
In Windows, the iPod will not appear as removable storage, unless it is set in iTunes to Enable disk use. By default, it is NOT set to Enable disk use.
In iTunes, if the sidebar (along left side of window) is hidden, from the iTunes menu bar, under View, select Show Sidebar. When the iPod is connected, it should appear in the sidebar, under DEVICES. It does not appear there?

IPod not showing up in Windows explorer / iTunes - not responding to reset

I have updated my new (1 day old!!) iPod nano to the newest firmware (1.1.1.)... and now I can't use the iPod anymore.
It doesn't show up in Windows Explorer. When I try to connect to it via Run, it says: 'E:\ is not accessible. The file or directory is corrupted and unreadable'
When trying to open Windows Explorer, it freezes - not showing any harddrives.
When trying to connect to it via CMD (dos)... It reads: 'The file or directory is corrupted and unreadable'
I have tried all the soft resets, hard resets etcetera. I have uninstalled the USB driver for iPod, uninstalled iTunes, reinstalled them both, used different USB ports. But still no success.
I can't connect to it via iPod Updater, because Windows won't connect to it.
The iPod itself does respond, although I can't find any data on it anymore.
How do I get my iPod to work again: connect to my windows / iTunes player? Please, any help is appreciated!
iPod nano 4GB Windows XP

I have tried all the 'Rs' that Apple recommend. As said, I can't hook up the iPod to my computer. I have tried to reset the iPod manually (holding the select and menu button) - but this doesn't work.
If there is another (manual) way to restore the iPod, I would love to hear about it.
As said: as for restoring the iPod - I can't get any contact with my iPod with my computer at all.

5th gen ipod not showing all songs for artists....

I just updated to 1.1 about a week ago, so i am not sure if this issue was present in 1.0 or not.
when looking at the artist list on my ipod, i noticed that if I go into a artist and that artist has only one album listed, it goes directly into that album list. Therefore not showing your other songs that you may have by the same artist because dont have the album name. Has anyone else had this issue??

Songs Missing When Browsing By Artist
btabz

5th gen Ipod not showing in Itunes

Just got a Imac and am trying to connect my 30 gig Ipod video, which I have been using with my sony VAIO. I have read several postings about converting the Ipod over to a mac format. However, the problem I am having is that my Ipod shows up in the finder but does not show up in Itunes or the updater. Any suggestions would be greatly appreciated. I've tried resetting the Ipod while connected, restarting Itunes and the Imac.

Updater? Which version of iTunes are you using, and are you connecting it to one of the USB ports on the back of the screen?

IPOD not showing up in WINDOWS XP

I have the old 10gig IPOD(non click wheel), it's about 3 or 4yrs old now. For some reason, when I plug it into my computer via firewire, it won't show up in windows, my computer or at all or itunes. It has worked in the past, but all of a sudden it stopped in the past few months. It's frustrating!!! I've reset it, put it in disk mode and it still doesn't solve the problems...anybody have any ideas? Thanks
eMachines T6212 Windows XP

hmmmm. it might be worth checking to see if your Windows is happy with your FireWire card at the moment:
Making sure your Windows PC recognizes your FireWire or USB card

Ipod not showing up in Windows/Itunes

when i connect my ipod nothing shows up in my computer. I get an autoplay message that says, "what do you want windows to do.." but there is nothing in the list. And when I hit okay, the ipod doesnt show up in itunes. Once in a blue moon it does show up in itunes and i get a message that says the ipod is corrupted, but as soon as i click okay the ipod disappears from the list in itunes. I have reinstalled itunes, set power management to always let the USB have power, restarted, ect ect. But nothing so far. The ipod hardware itself cant be the problem because it comes up fine in my firends computer. Could it be my computer?? Idk thx! Also this just started happening w/ the new update of 7.0 in itunes...

Try the new shuffle reset tool.
http://docs.info.apple.com/article.html?artnum=303979

Menu bar icons vanished and iPod not showing up in iTunes anymore

All menu bar icons on the right side (keyboard, clock, battery) vanished.
It's not possible to get them back by mark their visability in the system configuration. The system just ignores any attempt to do that (I can mark the check box, but nothing appears on the menu bar; after leaving and returning to the panel, the mark has gone).
Besides of that, my iPod doesn't show up in iTunes anymore (but does on the desktop).
My laptop may be physically damaged as it fell down to the floor a few days ago.
Can anybody help?

Welcome To Discussions Daniel Lerch!
Create a new Admin user account, and see if the same problem occurs while logged in to that account.
Have you run the Apple Hardware Test and also Repair Disk?
THESE ARE THE STEPS FOR USING DISK UTILITY TO REPAIR YOUR HD
1.Insert the System Install disk, Mac OS X CD-ROM disk, or Restore DVD disk, then restart the computer while holding the C key. Use the System disk, of the OS, that is currently installed.
2.Once started up from CD or DVD, choose Disk Utility from the Installer contextual menu for Panther, or Utilities for Tiger, on the Menubar at the top of the screen.
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3.Click the First Aid tab.
4.Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5.Select your Mac OS X volume, if necessary.
6.Click Repair. If DU reports errors it has fixed, then re-run Repair Disk until no errors are reported.
7.When finished, select Quit Disk Utility from the Installer menu.
8.Select Quit Installer from the Installer menu.
9.In the resulting pop-up window, choose restart.
10.After the computer has restarted, you can eject the CD.
Repeat steps 5 & 6, but select the Hard Drive this time. It's usually the first listed with the manufacturer's model number.
Make note of the S.M.A.R.T. status.
ali b

How do you get my 7th gen iPod Nano to work with Windows 8?

My iPod gives me the "iPod cannot be identified" error message when I plug it into my Windows 8 machine. I have tried literally all of the troubleshooting steps on the website. It works on previous versions of Windows. Anyone else have this problem? How do you fix it?

Ok, I've downloaded the drivers as suggested.but still not printing as it should.
It's now printing one page as opposed to many, but it still has the jargon on top of the page as depicted in my original post?
From this info you advised, it does suggest, does it not, that the HP Laser Jet 6p is supported.
Meanwhile, any other advice.
Regards

IPod not showing up in windows or iTunes...HELP ME!!!!

PLZ HELP ME!!! i need to know what i can do to fix my iPod...i already tried reseting it and the whole thing with the hold button!!!! the problem really is that when i hook up the dock connector to the iPod..the iPod doesn't light up like usual..yes it is charged so that isn't the problem....oh plz help me!!

We've had this problem since the release of iTunes 7
The problem is NOT the iPod (we've got several replaced from Apple). The problem is iTunes and some Windows-drivers.
Still, we haven't found which drivers that causing the problem, but if you install a new copy of Windows XP with SP1 and the iTunes, it works. But after installing a couple of programs, SP's etc, it fails!
Then iTunes says your iPod is corrupt and want you to restore it. When trying that, it stops and says it can't do that. Changing drive letter etc doesn't help either.
However, if you use an older version like 6.0 it works but ONLY if you have NOT installed 7.0 -> before. Uninstalling 7.0 want work.
This is something we have reported to Apple but they don't care about it at all. Which not is so bright as you can replace the iPod during your waranty and that cost Apple alot of money and time.
"We" are 9 computer technican's and all of us have iPod's. This message is only valid for iPod's over 30GB. iPod Nano etc is NOT affected

IPod not showing up in Windows or iTunes? Showing up as removable disk :F ?

I have a 5th generation iPod Nano and I have had it for about a year. I tried plugging the iPod into my computer (Windows), but my computer and iTunes do not recognize it. The first few seconds when I do plug in my iPod, I go to My Computer and I see my iPod with my name beside it, but after about 2 seconds, it changes to Removable Disk :F and then it disappears completely after another second. Last night, when I upgraded my iTunes version, the iPod connected fine, but today, my iPod has not been recognized at all. Help please?

iPod Repair Tutorials
iTunes & iPod Hints & Tips

Please Help-- 1st Gen iPod not showing in iTunes or desktop :(

My 20g iPod doesn't show up anymore in iTunes or on the desktop, but the iPod itself does say "do not disconnect" when it's connected to the USB port. It's plugged directly into my computer and I've tried switching ports, so it's not that. I was able to connect my friend's nano, so the problem can't be the port.
I've done the 5 Rs without success. I only have OS X 10.2.8, so can't upgrade to iTunes 7. I had iTunes 6.0.5 but changed back to 6.0.4 after hearing that it might help with the iPod problem. Nothing seems to have changed, though, the iPod is still unrecognized by iTunes and the desktop.
I've read a bunch of posts saying to repair disk permissions, but when I open Disk Utility(which does show the iPod) my only options are Verify Disk and Repair Disk. Verify and Repair Disk Permissions are there but are in grey (can't click on them.)...
And my warranty ran out ages ago, so the Apple people won't help me. Great for them, but I'm screwed.
So I know very little about how these things work, and everything I've tried has failed thus far. Any advice you have would be wonderful!
EMac Mac OS X (10.2.x) Mac OS X 10.2.8

Update: I get this message when the iPod is plugged into the computer:
"You have inserted a disk containing no volumes that Mac OS X can read. To use the unreadable volumes, click Initialize. To continue with the disk inserted, click Ignore."
There are three options: Initialize, Ignore, and Eject, but none of them do anything. ??? I'm clueless as to what to do here.

4th gen iPod not showing music purchases

I have recently purchased some music on my mac (book, 2008, running 10.6.8... because that is the most it can...) through the itunes store.
As soon as it downloaded, it rang up my ipad (2), ipod (touch, 4th gen, running 6.1.6, also because that is the newest it can handle...) if i wanted to download it onto those devices. I downloaded it to my ipad, adjusted the settings so it would always do so from now on, and instantly had access to it to listen.
I was hoping for the same to happen on my ipod, since i use it exclusively to have access to music in my car, and went through the same authorization process in settings. But when I tried to look up my purchases, it had absolutely nothing in there. I am wondering if the difference between the oler and newer OS would make my music purchases unavailable this way, or if something else might be the issue... I have all purchases throught itunes enabled to download as available, and am really baffled as to why they should be inaccessible since I was given the option specifically to do that through the settings.
I would try to sync manually, but the newer laptop (running the most current OS) that has all my playlists and sync info is currently two states away with my husband, and out of my reach for a while.
As much I try to skirt around not being able to have the newest OSs on my older, but still perfectly well functioning devices, my annoyance grows by the day at isues like these. Hoping that there is a solution to this, rather than another disappointing fiasco repaying my loyalty for these wonderful products...

You can try:
- Do y have any Restrictions set that would prevent loading those songs? Settings>General>Restrictions
- Backup and restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Last contact iTunes by:
Contact iTunes

Ipod not showing up on windows or itunes.

plugged ipod into friends computer and it deleted everything,. so i decided to update it to ios5 and now it wont show up on itunes or even the computer. what do i do?

Try this
http://www.apple.com/support/ipodtouch/assistant/itunes/

3rd gen iPod not showing up on iBook G3

Hey everybody...many thanks in advance for your input.
So recently my iPod has stopped mounting on my desktop and stopped updating from iTunes. The disk profiler and disk utility do not recognize that it is attached, even when it is in disk mode. I have tried restoring it and restarting it to no avail. I have shut down the computer, unplugged it, let it rest, and restarted...that hasn't worked.
The iPod does mount on other macs...it worked fine on my mother's eMac and even on the apple store computer i brought it into for repair. So I have no idea what is going on with my firewire port. The port is still working, because when I plug it in the battery charges, but my library doesn't upload, and the device doesn't mount. Please help!

I am having the same problem. I have a 3rd generation iPod and a 733 Mhz G4 Quicksilver with OS X 10.4.3. The problem only exists over Firewire and only on my computer. The ipod will work with other computers over firewire and it will work over my computer with USB. However, since I don't have USB 2 and 3rd generation iPods can't charge over USB, this makes updating my ipod very difficult. I have tried the following things to no avail:
•Resetting iPod by holding down Menu/Play simultaneously
•Resetting iPod into disk mode
•Restoring iPod (via USB connection)
•Shutting down the computer, unplugging all cables and waiting (this actually worked once, momentarily. The problem immediately returned).
•Reinstalling my firewire .kext files from the OS X 10.4.3 combo updater (using a program called Pacifist) and restarting the computer.
•Resetting the PRAM on my computer
Any other ideas? This seems to be an issue potentially affecting thousands of people.
As for RassCQ, sorry, I have no solution for you, but maybe someone else does?
-Alex

7th gen iPod not showing up in Windows 8 anymore

Similar Messages

Maybe you are looking for