8.0.1 has not solved the authorisation issue for me. What a disappointment.

I tried the methods dscribed here:
http://support.apple.com/kb/TS1389?viewlocale=en_US
My computer has no such folder "Users/Shared/SC Info"
I searched for "SC Info" and it does not exist on my system.

hi,
the "SC Info" is a hidden folder, this is why the article you refer in your post gives a way to delete this folder by using the method Go > Go to Folder. you should try it as describe in the article you are refering to.

Similar Messages

Has Adobe solved the crashing issues for Premiere Elements 10?

Hi there,
I've been using Adobe Premiere Elements 8 for about 2 years now. I do like this program and appreciate it being quite a straight forward, uncomplicated, video editing program. One thing which really annoys me about it, however, is its constant tendency to just crash when I import and move around *.jpg images using motion tracking, or just dragging something around the screen. For example, I film myself walking into a room with my hand pretending to hold a balloon. I then import a *.jpg image of a balloon into the shot and move to position it in my hand as though it's really there.
My intention is to edit the balloon image to follow my hand while I'm in the room and, while I could use the motion tracking feature, I prefer to edit frame by frame, or else the *.jpg image doesn't always line up properly with what it's following (it's close enough, but I prefer doing it myself).
Whenever I move an imported *.jpg image on the screen, it obviously becomes blocky for a moment until you wait for the image to become clear (I think pixilated is the right term, but am not certain) or unblocky (ie curved edges, which moved and became square, become curved again).
What Premiere Elements 8 has been doing on my computer (which has an i5 processor, more than enough memory and so forth) is to crash out of the program when I drag an image across the screen.
It has helped to move a picture slightly, wait for it to become clear, then move it slightly again, but this still has a tendency to cause Premiere Elements to crash out.
CAN ANYONE tell me, please, if Adobe Premiere Elements 10 has this or similar issues because this problem alone is driving me crazy?
Advance thanks.

Welcome to the forum.
Many users felt that PrE 8 was a very weak release (kind of like Adobe's version of MS's Vista OS), but most users, with properly setup and tuned computers, find that PrE 10 is a very stable build.
For the issues with PrE 8 crashing, I would see this ARTICLE. It starts with a checklist on setting up PrE and the computer, for best results. Then, it goes into many tuneup tips, for both the computer, and the OS. Finally, it lists links to help with troubleshooting.
Good luck, and hope that something in the article helps,
Hunt

I have music stored and it wont let me transfer them over all i get is your apple id has been disabled, i have re set my pasword and this has not solved the problem

i had a iphone in 2010, i purchased music which is still stored on my original apple id, but when i try to transfer the music ,and download apps all it says is your apple id has been disabled, i have tried re setting a new pass word but this has not solved the problem can any one help please

Contact itunes support

HT1751 I was installing iTunes 11.1.4 and it was unsuccessful. I get a message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.

I was installing iTunes 11.1.4 and it was unsuccessful. I get the message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.

Troubleshooting issues with iTunes for Windows updates - MSVCR80

Hi There, my itunes no longer opens. It quits unexpectedly for some reason when I try to login. I have tried updating my itunes and this has not solved the problem. Any help would be appreciated, thanks

Hi There,
My itunes quits unexpectedly when I try to login. I cannot even open the application, not sure why this is happening. Have upgraded my itunes and this has not solved the problem either. If anyone can help me out, that would be appreciated. Thanks

Hello balisurfergal,
Thank you for using Apple Support Communities.
For more information, take a look at:
Mac OS X 10.6: If an application quits unexpectedly
http://support.apple.com/kb/PH7044
iTunes 10 for Mac: May quit unexpectedly on launch
http://support.apple.com/kb/TS3494
Have a nice day,
Mario

TS2709 I can't get Apple Tv to sync. I have opened a port (3689) for itunes sharing but it has not solved the issue. Any ideas?

I can't get Apple Tv to sync. I have opened a port (3689) for itunes sharing but it has not solved the issue. Any ideas?

do you mean sync or shared lib?
because unless you have the old silver alu appletv with a harddisk sync is not possible at all

TS3276 Web through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro, but no my iMac. Connection Doctor shows all green lights.

Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work w

Hello , Recently my company purchased a Fujifilm X30 . We were surprised that Adobe has not updated the plug in for this camera. Since we are your customers, we would like to know, when they will perform this update ? For us it is very important to work with all our tools work quickly and efficiently, I guess I understand.
We await your response .
Thank you very much .

This is a user to user forum with "some" Adobe staff participation, make requests at this link
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Firefox has suddenly stopped connecting on one of three user accounts on the same computer. That account still connects with Safari - but not Firefox. A clean-install has not solved the problem. Help?

Three user accounts on the same computer all link to a single copy of Firefox 3.6.8 - but one of them has suddenly lost its ability to use the program. Firefox opens in that account, but it cannot connect to the Internet. 'Done' appears at the lower left of a blank Firefox page [it's set to load a blank page initially], as though a page had finished downloading ... but Firefox does not actually generate any Internet activityx.
Previously, the Firefox connection for this account was smooth and reliable. I haven't added, upgraded or downloaded any new programs, nor made any other computer changes in recent weeks or months.
Puzzlingly - that same account still connects successfully to the Internet via Safari. And the other accounts on the same computer continue to use Firefox with no problem - including a test user-account that I set up today to help troubleshoot the problem. The blockage is restricted solely to Firefox with that one user account.
Following your Support page instructions, I did a clean-install of Firefox 3.6.8, removing both the existing Firefox 3.6.8 and the Library/Application Support/Firefox folder. Going the extra mile, I checked all accounts to be certain that no Firefox folders remained in any of them - then emptied the Trash and restarted before installing a freshly downloaded 3.6.8. But blimey - the blockage still persists for that one user account.
Firefox shows no visible cookies that might influence the connection. [It's set to delete all cookies upon closing anyway.] And I see no obvious instructions in Mac's firewall or any software program to refuse access to Firefox. The computer is stand-alone, not networked. And in any case, Firefox works just fine in the two other user accounts.
Deleting the hobbled user account is not feasible. So what is causing this roadblock? Did I miss a step in the clean-install? How can that account resume using Firefox?
Thanks in advance for your advice.

If files already have been downloaded then remove the files in the updates and updates\0 folder.
You can also delete active-update.xml and possibly updates.xml (stores the update history).
* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

I have tried to get my radio feature to work and it does not. I followed some advice from this forum on a related question and performed the "settings reset," but this has not solved the problem. I have icon, headphones, still no reception

Has anyone else had this problem that just got one? This is a christmas gift and I was attempting to explore the radio feature and discovered the issue. Do we have this feature or not?? Thanks for any insight anyone can give. Thanks and Happy New Year!!

You are not pushing the headphones all the way in. Make sure the white plastic is flush with the iPod.

10.8.3 has not solved 2 key issues

I have posted several issues concerning Mountain Lion since I first installed it a few weeks after it came out in July 2012.
These issues have still NOT been addressed in the latest Mac OS X 10.8.3 update:
Hide others (hide all other open applications) still means that when returning to an eMail in Apple Mail or a note in Apple's Notes program, the cursor is gone, disappeared, and the highlighting is strange too – a weird brown/grey and not the default highlight color. Have to click on another box or note or something to get the cursor to reappear. Over 6 months like this… Have you experienced this? Try to do it and see what you get.
The Finder windows don't retain settings in icon view: Icon size, background color or picture, sorting (reverts to none) and icon /item view all change back to "32x32, white, none and no item preview or icon view checked" Again, please let me know if you see this-- you need to put some pictures as window backgrounds, color them, view in Icon view- set the icon size for something other than 32x32…
A new problem: Never had this issue until 10.8.3: The icons of .webloc which one drags to the Desktop from Safari or otherwise store in folders no longer have an icon picture - they are just a plain white icon with a tab fold-down upper right. Sometimes they appear as before, mostly not.
#2 above is clearly the most annoying and makes icon view almost worthless to use. Constantly resetting key windows-- and funny that it mainly affects the same windows but can happen to any window I open. Often upon a restart, but can happen at anytime.
Comments welcome.
Best regards,
Steve Schulte
Monday 18 March 2013

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Anyone solved the sound issue for UK Sky viewers?

Hi,
At the moment, I have a Sky STB feeding into the MSI 8606, when I try to use the small audio link cable, the sound is fine for 1 minute or so, then vanishes... I have no screensavers or any scheduled tasks.
The only solution at the moment is to feed a separate sound feed into the Line-in of the sound card.
I believe this is an issue with the way PAL is encoded for use with Sky, and would probably be fine when connected directly to the Aerial.
Anyone got a solution?
As an aside, I am considering building a linux PVR based on MythTV has anyone got the MSI 8606 to work with this type of installation?
Thanks
RevJim

Quote
The only solution at the moment is to feed a separate sound feed into the Line-in of the sound card
i believe that is the better solution. as long as your recording program (MSIPVS) has the Line-In set as recording source, you shouldn't have any problems

TS4496 Is apple working to solve the tethering issue for the Canon 6D?

Aperture is not detecting my Canon 6D for tethering. Is there a solution in sight?

We don't know. Send feedback to Apple:
http://www.apple.com/feedback/aperture.html
As a workaround you can use the supplied Canon Software.

Why does my Alesis ioj2 express only come out through one side? When I sing into the microphone, it only comes out one side. I've set everything to stereo and it still has not solved the problem. Please help ASAP.

Please help with my problem. I need to start recording!!

Chris Huber wrote:
Why does my Alesis ioj2 express only come out through one side?
http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
(Let the page FULLY load. The link to your answer is at the top of your screen)

I have a problem with itunes opening. I have downloaded the new version and it ask to repair or remove itunes I chose to repair. This has not solved the problem. If I remove the program how do I get my songs and playlist back?

If I remove itunes from the computer, how do I get my songs and playlist back?

Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

8.0.1 has not solved the authorisation issue for me. What a disappointment.

Similar Messages

Maybe you are looking for