8.0.5.0.0 - 8.0.5.1 What fixes / enhancements?
I'm considering downloading the 8051 but wanted to gauge whether
I need to go through the hassle
first... ;)
Thanks for your replies...
null
Kim D. Andersen (guest) wrote:
: Hi there
: I have experienced the following problem when trying to access
a
: either of the two oracle version from the other:
: When using 8.0.5 sqlplus via net8 to access a 8.1.5 this
: generates a segmetation fault in the 8.0.5 sqlplus.
: And when trying form the other side: sqlplus from 8.1.5 via
net8
: to the 8.0.5 it just hangs, and never reaches the normal SQL>
: prompt.
: ----------- Terminal cut ------------------------------------
: [oracle@rekasi3 log]$ sqlplus system/manager@RAR
: SQL*Plus: Release 8.1.5.0.0 - Production on Sat Aug 7 00:45:34
: 1999
: (c) Copyright 1999 Oracle Corporation. All rights reserved.
: ------------- Terminal cut end ------------------------------
: This is as far as it goes...
: In the listener.log file on the 8.1.5 (and 8.0.5) I can see
that
: the connection is initiated from the following log line(s)
: (Hostname and numbers removed by me):
: 07-AUG-99 00:38:46 *
: (CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=)
(HOST=##################.d
: k)(USER=kim))) *
: (ADDRESS=(PROTOCOL=tcp)(HOST=###.###.###.###)(PORT=17553)) *
: establish * ORCL * 0
: From my Windows NT 4.0 sp3 I can access both systems using
8.0.5
: client software with OEM, SQL*PLUS and TOAD.
: Anybody have some suggestions or experienced similar problems.
Or
: does anybody know of some additional logging I can enable to
gain
: more information ??
: Kim (DBA vanabe)
I3ve received the same message when I was trying to create
my database. I suspect the problem is due to the misconfiguration
of SHMMAX variable!
Have you already configured the environment and compiled the
kernel according to the Installation manual?
Where can we set all those variables, i.e., NPROC, SHMMAX,
SHMMIN, MAXUP and so on ?
null
Similar Messages
-
Understanding problem with threads
Hi,
yesterday (at least i think it was yesterday) I posted a question in this forum, I needed help with writing a multithreaded server. The answer was simple and I wrote my program. It kinda works, but there is one thing I don't understand:
I have a class, which handles the clientconnections and one that listens for incoming conections. I pass the socket returned by ServerSocket.accept() to the clientconnection object.
There is only ONE clientconnection-object. The listener just passes the socket and calls the start() method of the clientconnection object.
The clientconnection just writes some text to the client. Connecting more than one client at the same time works too. Everything works fine. And that's what I don't get. If I have only O N E clientconnection the texttransfer shouldn't work after i connect the second client, right?
But it does, is there a mistake in my logic or am I losing my sanity? :)Hi again Danbas,
Maybe you are losing your sanity... but that's ok. :)
public void startlistening(){
while(true){
try{
clientconn cc = new clientconn(ssock.accept());
}catch(IOException ie){}
//The Constructor in clientconn would look like this:
public clientconn(Socket sock){
//No idea what to do here
Every time you perform "new", you create a new object. And you are calling new every time you accept a new socket connection. So you are creating a new clientconn object each time. -
A problem with Threads and loops.
Hi, I have some code that needs to be constantly running, like while(true)
//code here
}However, the code just checks to see if the user has input anything (and then if the user has, it goes to do some other stuff) so I don't need it constantly running and hogging up 98% of the CPU. So I made my class (which has the method that needs to be looped, call it ClassA) implement Runnable. Then I just added the method which needed to be looped into the public void run()
I have another class which creates an instance of the above class (call it ClassB), and the main(String[] args) is in there.
public static void main(String[] args)
ClassA test = new ClassA();
Thread thread = new Thread(test.getInstanceOfClassA());
thread.start();
while(true)
//I do not know what to put here
try
thread.sleep(100);
catch(InterruptedException iex)
}However, the thread only calls run() once,(duh...) but I can't think of away to get it to run - sleep - run -sleep forever. Can someone help me?Hi, I have some code that needs to be constantly
running, like while(true)
//code here
}However, the code just checks to see if the user has
input anything (and then if the user has, it goes to
do some other stuff) so I don't need it constantly
running and hogging up 98% of the CPU. Where does the user input come from. Are you reading from an InputStream? If so, then your loop will be blocked anyway when reading from the InputStream until data is available. During that time, the loop will not consume processor cycles.
public static void main(String[] args)
ClassA test = new ClassA();
Thread thread = new Thread(test.getInstanceOfClassA());I have never seen this idiom. If ClassA instanceof Runnable, you simply write new Thread(test).
thread.start();
while(true)
//I do not know what to put
do not know what to put here
try
thread.sleep(100);
catch(InterruptedException iex)
}However, the thread only calls run() once,(duh...)Yeah, why would you want to call it more than once given that you have an infinite loop in ClassA.run()?
Harald.
Java Text Crunching: http://www.ebi.ac.uk/Rebholz-srv/whatizit/software -
Problem with threads within applet
Hello,
I got an applet, inside this applet I have a singleton, inside this singleton I have a thread.
this thread is running in endless loop.
he is doing something and go to sleep on and on.
the problem is,
when I refresh my IE6 browser I see more than 1 thread.
for debug matter, I did the following things:
inside the thread, sysout every time he goes to sleep.
sysout in the singleton constructor.
sysout in the singleton destructor.
the output goes like this:
when refresh the page, the singleton constructor loading but not every refresh, sometimes I see the constructor output and sometimes I dont.
The thread inside the singleton is giving me the same output, sometime I see more than one thread at a time and sometimes I dont.
The destructor never works (no output there).
I don't understand what is going on.
someone can please shed some light?
thanks.
btw. I am working with JRE 1.1
this is very old and big applet and I can't convert it to something new.Ooops. sorry!
I did.
public void start() {
public void stop() {
public void destroy() {
try {
resetAll();
Configuration.closeConnection();
QuoteItem.closeConnection();
} finally {
try {
super.finalize();
} catch (Throwable e) {
e.printStackTrace();
} -
Problem with Threads and a static variable
I have a problem with the code below. I am yet to make sure that I understand the problem. Correct me if I am wrong please.
Code functionality:
A timer calls SetState every second. It sets the state and sets boolean variable "changed" to true. Then notifies a main process thread to check if the state changed to send a message.
The problem as far I understand is:
Assume the timer Thread calls SetState twice before the main process Thread runs. As a result, "changed" is set to true twice. However, since the main process is blocked twice during the two calls to SetState, when it runs it would have the two SetState timer threads blocked on its synchronized body. It will pass the first one, send the message and set "changed" to false since it was true. Now, it will pass the second thread, but here is the problem, "changed" is already set to false. As a result, it won't send the message even though it is supposed to.
Would you please let me know if my understanding is correct? If so, what would you propose to resolve the problem? Should I call wait some other or should I notify in a different way?
Thanks,
B.D.
Code:
private static volatile boolean bChanged = false;
private static Thread objMainProcess;
protected static void Init(){
objMainProcess = new Thread() {
public void run() {
while( objMainProcess == Thread.currentThread() ) {
GetState();
objMainProcess.setDaemon( true );
objMainProcess.start();
public static void initStatusTimer(){
if(objTimer == null)
objTimer = new javax.swing.Timer( 1000, new java.awt.event.ActionListener(){
public void actionPerformed( java.awt.event.ActionEvent evt){
SetState();
private static void SetState(){
if( objMainProcess == null ) return;
synchronized( objMainProcess ) {
bChanged = true;
try{
objMainProcess.notify();
}catch( IllegalMonitorStateException e ) {}
private static boolean GetState() {
if( objMainProcess == null ) return false;
synchronized( objMainProcess ) {
if( bChanged) {
SendMessage();
bChanged = false;
return true;
try {
objMainProcess.wait();
}catch( InterruptedException e ) {}
return false;
}Thanks DrClap for your reply. Everything you said is right. It is not easy to make them alternate since SetState() could be called from different places where the state could be anything else but a status message. Like a GREETING message for example. It is a handshaking message but not a status message.
Again as you said, There is a reason I can't call sendMessage() inside setState().
The only way I was able to do it is by having a counter of the number of notifies that have been called. Every time notify() is called a counter is incremented. Now instead of just checking if "changed" flag is true, I also check if notify counter is greater than zero. If both true, I send the message. If "changed" flag is false, I check again if the notify counter is greater than zero, I send the message. This way it works, but it is kind of a patch than a good design fix. I am yet to find a good solution.
Thanks,
B.D. -
Problem with threads running javaw
Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue; // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer) // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
// System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
}catch(Exception a){
JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run -
Problem with threads and ProgressMonitor
Dear Friends:
I have a little problem with a thread and a ProgressMonitor. I have a long time process that runs in a thread (the thread is in an separate class). The thread has a ProgressMonitor that works fine and shows the tasks progress.
But I need deactivate the main class(the main class is the user interface) until the thread ends.
I use something like this:
LongTask myTask=new LongTask();
myTask.start();
myTask.join();
Now, the main class waits for the task to end, but the progress monitor don`t works fine: it shows only the dialog but not the progress bar.
What's wrong?Is the dialog a modal dialog? This can block other UI updates.
In general, you should make sure that it isn't modal, and that your workThread has a fairly low priority so that the UI can do its updating -
Problem with threads in my swing application
Hi,
I have some problem in running my swing app. Thre problem is related to threads.
What i am developing, is a gui framework where i can add different pluggable components to the framework.
The framework is working fine, but when i press the close action then the gui should close down the present component which is active. The close action is of the framework and the component has the responsibility of checking if it's work is saved or not and hence to throw a message for saving the work, therefore, what i have done is that i call the close method for the component in a separate thread and from my main thread i call the join method for the component's thread.But after join the whole gui hangs.
I think after the join method even the GUI thread , which is started for every gui, also waits for the component's thread to finish but the component thread can't finish because the gui thread is also waiting for the component to finish. This creates a deadlock situation.
I dont know wht's happening it's purely my guess.
One more thing. Why i am calling the component through a different thread, is because , if the component's work is not saved by the user then it must throw a message to save the work. If i continue this message throwing in my main thread only then the main thread doesnt wait for user press of the yes no or cancel button for saving the work . It immediately progresses to the next statement.
Can anybody help me get out of this?
Regards,
amazing_javaFor my original bad thread version, I have rewritten it mimicking javax.swing.Timer
implementation, reducing average CPU usage to 2 - 3%.
Will you try this:
import javax.swing.*;
import java.awt.*;
import java.text.*;
import java.util.*;
public class SamurayClockW{
JFrame frame;
Container con;
ClockTextFieldW ctf;
public SamurayClockW(){
frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
con = frame.getContentPane();
ctf = new ClockTextFieldW();
con.add(ctf, BorderLayout.SOUTH);
frame.setBounds(100, 100, 300, 300);
frame.setVisible(true);
ctf.start();
public static void main(String[] args){
new SamurayClockW();
class ClockTextFieldW extends JTextField implements Runnable{
String clock;
boolean running;
public ClockTextFieldW(){
setEditable(false);
setHorizontalAlignment(RIGHT);
public synchronized void start(){
running = true;
Thread t = new Thread(this);
t.start();
public synchronized void stop(){
running = false;
public synchronized void run(){
SimpleDateFormat sdf = new SimpleDateFormat("HH:mm:ss");
try{
while (running){
clock = sdf.format(new Date());
SwingUtilities.invokeLater(new Runnable(){
public void run(){
setText(clock);
try{
wait(1000);
catch (InterruptedException ie){
ie.printStackTrace();
catch (ThreadDeath td){
running = false;
} -
Problem with threads in JFrame
Hy everyone...i have a small problem when i try to insert clock in my JFrame , because all i get is an empty text field.
What i do is that i create inner class that extends Thread and implements Runnable , but i dont know ... i saw some examples on the intrnet...but they are all for Applets...
Does any one know how i can implement this in JFrame (JTextField in JFrame).
Actually any material on threads in JFrame or JPanel would be great....THNX.For my original bad thread version, I have rewritten it mimicking javax.swing.Timer
implementation, reducing average CPU usage to 2 - 3%.
Will you try this:
import javax.swing.*;
import java.awt.*;
import java.text.*;
import java.util.*;
public class SamurayClockW{
JFrame frame;
Container con;
ClockTextFieldW ctf;
public SamurayClockW(){
frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
con = frame.getContentPane();
ctf = new ClockTextFieldW();
con.add(ctf, BorderLayout.SOUTH);
frame.setBounds(100, 100, 300, 300);
frame.setVisible(true);
ctf.start();
public static void main(String[] args){
new SamurayClockW();
class ClockTextFieldW extends JTextField implements Runnable{
String clock;
boolean running;
public ClockTextFieldW(){
setEditable(false);
setHorizontalAlignment(RIGHT);
public synchronized void start(){
running = true;
Thread t = new Thread(this);
t.start();
public synchronized void stop(){
running = false;
public synchronized void run(){
SimpleDateFormat sdf = new SimpleDateFormat("HH:mm:ss");
try{
while (running){
clock = sdf.format(new Date());
SwingUtilities.invokeLater(new Runnable(){
public void run(){
setText(clock);
try{
wait(1000);
catch (InterruptedException ie){
ie.printStackTrace();
catch (ThreadDeath td){
running = false;
} -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
It has no response when I try to login database. I cancel the login since I don't have any choices
SQL> connect apps/apps
^CERROR:
ORA-00604: error occurred at recursive SQL level 1
ORA-01013: user requested cancel of current operation
But it is ok if I login as dba role like"/ as sysdba"
Please advice,
AmyWhen did it last work for application users?
What changed?
Identify the faulty trigger & either fix or DROP it.
SQL> desc dba_objects
Name Null? Type
OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(128)
SUBOBJECT_NAME VARCHAR2(30)
OBJECT_ID NUMBER
DATA_OBJECT_ID NUMBER
OBJECT_TYPE VARCHAR2(19)
CREATED DATE
LAST_DDL_TIME DATE
TIMESTAMP VARCHAR2(19)
STATUS VARCHAR2(7)
TEMPORARY VARCHAR2(1)
GENERATED VARCHAR2(1)
SECONDARY VARCHAR2(1)SELECT .... WHERE OBJECT_TYPE = 'TRIGGER' .... -
My phone wont let me download apps
I tried updating apps on my iphone. When I click update all it acts like it's going to download. Then it tells me there's an error. I put in my billing information but it still won't download them. I don't know what to do.
What is the error?
-
Mixing memory modules on Westmere
Dear Hardware gurus,
I have a 12-Cores Westmere. Do you know is it possible to mix different memory modules on it, namely:
6x1 Gb 1330Mhz
+
2x4 Gb 1066Mhz
and if yes, in which configuration?
Thanks a lot for any comment!Kappy, thanks for the note.
I am actually going to order some more 1333 modules, but just for the short time I have to work with what I have currently (see my original post).
As I posted above, I tried a bit already to combine the modules and Mac doesn't boot
Can you suggest a configuration, which will work? -
Jabber Options - Phone Accounts - Voicemail -- "Spinning Wheel"
Been trying to resolve a nagging issue. We currently have CUCM 8.6.2-20000-2, CUPS 8.6.4-10000-28 and just put up Unity Conn 9.1. Jabber Win clients are 9.2(1). Several people have not been able to integrate voicemail into the Jabber client.
We are totally MS AD integrated. In CUPS, I had Applications -> Cisco Jabber -> Settiings Credentials Used For Voicemail service set to CUPS so the user would not need to supply credentials. To help me debug, I went and changed this setting to "Not Set" so that the Phone Accounts option appears in Jabber 4 Win client.
So far all the people who do not work access the Phone Accounts setting in the Jabber client see the "Spinning Wheel". They can't see the fields to enter their AD creds and the voicemail server. Reinstall of the client does not seem to help. There seemed to be a bug that described this but I think it was fixed in 9.1(2). You can't display the Bug description because it contains proprietary info.
I have attached a screen shot of my Jabber Client Phone Account -- when I enter the credentials, I log in fine.
Anyone seen this or know how to fix?
TIA --- PerryWell, I had TAC look at this issue. Short story is that it was an issue with one of the *many* local cache files which hid the real source of the problem. I actually had the Mailstore misconfgured in CUPS. I used the Exchange server's CAS IP instead of Unity Connection. We created new Mailstore definition that used the Unity Conn IP's, created a new Voicemail Profile and associated the user to that profile. She worked....
I deleted my all my Jabber for Windows local cache files and I then received the "spining wheel" issue. I moved my ID to the new Voicemail Profile with correct Mailstore and I could connect fine. TAC spent an hour pouring through files on my PC and could not find the reason why my ID was working. TAC indicates that in 9.x, a lot of this configuration moves to CUCM and hopefully cuts down on these issues! PRT files from the Jabber client really did not assist them in locating the problem.
Hope this helps.... -
Have had no luck with PCs trying to do music recoding so I swithced over to Mac because I heard it so easy, seamless, and problem free. Now, on opening Garageband for the first time and trying to preview loops I get an error mesage that says: "the software instrument or apple loop selected is currently being installed. You have already initiated the installation of additional content for Garageband via Software update. For additional information please open the software update application." I have opened this application and nothing. I have now spent about two hours trying to fix this problem. Should I "convert back to PC, take this load of crap back to the store or is there something simple I am missing?
I have found if you wait long enough, you will hear the file begin to play. Sometimes the delay can several seconds. Not acceptable IMO.
-
Pension issue Mid Month Leaving
Dear All,
As per rule sustem should deduct mid month joining/leaving/absences or transfer scenarios, the Pension/PF Basis will be correspondingly prorated. But our system is not doing this. In RT table i have found 3FC Pension Basis for Er c 01/2010 0.00 6,500.00.
Employee leaving date is 14.04.2010. system is picking pension amout as 541. Last year it was coming right.
Please suggest.
AshwaniDear Jayanti,
We required prorata basis pension in case of left employees and system is not doing this. This is the issue. As per our PF experts Pension amount should come on prorata basis for left employees in case they left mid of month.System is doing prorata basis last year but from this year it is deducting 541. I am giving two RT cases of different years.
RT table for year 2010. DOL 26.04.2010
/111 EPF Basis 01/2010 0.00 8,750.00
/139 VPF Basis 01/2010 0.00 8,750.00
/3F1 Ee PF contribution 01/2010 0.00 1,050.00
/3F3 Er PF contribution 01/2010 0.00 509.00
/3F5 Ee Mon PF contribution 01/2010 0.00 1,050.00
/3F6 Ee Ann PF contribution 01/2010 0.00 12,600.00
/3F9 PF adm chrgs * 1,00,00 01/2010 0.00 96.25
/3FA PF basis for Ee contri 01/2010 0.00 8,750.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3F4 Er Pension contributio 01/2010 0.00 541.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FB PF Basis for Er Contri 01/2010 0.00 8,750.00
/3FC Pension Basis for Er c 01/2010 0.00 6,500.00
/3FJ VPF basis for Ee contr 01/2010 0.00 8,750.00
/3FL PF Basis for Er Contri 01/2010 0.00 6,500.00
/3R3 Metro HRA Basis Amount 01/2010 0.00 8,750.00
1BAS Basic Salary 01/2010 0.00 8,750.00
RT table for year 2009. DOL 27.10.2009
/111 EPF Basis 07/2009 0.00 9,016.13
/139 VPF Basis 07/2009 0.00 9,016.13
/3F1 Ee PF contribution 07/2009 0.00 1,082.00
/3F3 Er PF contribution 07/2009 0.00 628.00
/3F5 Ee Mon PF contribution 07/2009 0.00 1,082.00
/3F6 Ee Ann PF contribution 07/2009 0.00 8,822.00
/3F9 PF adm chrgs * 1,00,00 07/2009 0.00 99.18
/3FA PF basis for Ee contri 07/2009 0.00 9,016.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3FB PF Basis for Er Contri 07/2009 0.00 9,016.00
/3FC Pension Basis for Er c 07/2009 0.00 5,452.00
/3FJ VPF basis for Ee contr 07/2009 0.00 9,016.00
/3FL PF Basis for Er Contri 07/2009 0.00 5,452.00
/3R4 Non-metro HRA Basis Am 07/2009 0.00 9,016.13
1BAS Basic Salary 07/2009 0.00 9,016.13
Now please suggest what to do. where is the problem ? If have also checked EXIT_HINCALC0_002 but nothing written in it.
With Regards
Ashwani
Maybe you are looking for
-
FP05-Payment Lot/ FP25-Check Lot
Hi Can anyone tell me the diffences between the above two T.Codes. which transactions code we should use for cheque payment. like single receipt. In case of outgoing payment of single cheque with cheque print which transaction i have to use apart fro
-
System wide spellcheck - settings
Where can I change the settings for system wide spellchecking?
-
Having trouble installing CS5.5 on lion 10.7.3?
Are you having trouble installing CS5.5 on your mac (os lion 10.7.3)? Are you tired of receiving error reports (i recieved "exit code: 24" numerous times)? there is an easy way without hacking your mac into bits. start your comouter in security mode
-
Why does my iTunes hang every time when using automatic device detect?
Why does my iTunes hang every time that I connect either of my devices (iTouch-4th Gen, iPod Nano-5th Gen), to my Win 7 (64-bit) PC desktop? By the way, this does not happen if I open iTunes first, and then connect the device. So my workaround was
-
How do I mark an all-day event as "busy"
How do I mark an all-day event as "busy"