8.0.5 & 8.1.6 rel 2

We are installing 8i 8.1.6 Rel 2 on a Unix server that contains 8.0.5 binaries and a database. Is it necessary to do a migration of the current 8.0.5 database to version 8.1.6 Rel 2?

Read the install guide - but do a full export first.
I remeber something about a new install overwriting a shell script that you should backup first. (It's in the manual.)
Beyond that, if you install to a NEW Oracle_home, you should be fine.
Doug

Similar Messages

How do I clone a fully operational system that relies on Windows 7 for the underlying operating system?

I'm a retired IT professional desiring to assist a friend who owns a small business who recently experienced very malicious attacks on her computers from unknown parties operating anonymously on the Internet. Because
of her lack of preparation for such events, her future ability to continue to conduct her business was seriously threatened. The incident revealed, to my friend, the need to be prepared to deal with spontaneously occurring problems that create suspicious conditions
that arise with modern computer software before they can be analyzed in a sufficiently comprehensive manner to have an opinion regarding the appropriate course of action for obtaining a permanent remedy. In that, the ability to quickly react on the basis of
only suspicion is the goal.
I want to recommend an approach that involves maintaining an offline image of an operational system that is capable of running any of her computers. This image needs to include all of the software required to run
her business. In that, it is not limited to the operating system. This single image could then be used to restore any computer to a known reliable state should the need arise. This technique will also insure that each computer has sufficiently similar capability
to allow them to substitute for each other. Insofar as image restoration is itself an operation susceptible to causing unacceptable business delay I'm also recommending that each of the identical computers (i.e., from a hardware perspective) operate in a multi-boot
environment where a virtually offline backup can be instantiated via a simple reboot (i.e., an operation that all users of the Windows operating systems turn to when strange behavior is first observed). My intention is to limit the cloned system (i.e., partition
or C: drive) to the operational software. The business data along with storage for temporary data will be isolated on other partitions (i.e, mounted with other drive letters) accessible by each instance of the software eligible for multi-boot operation.
This kind of operation is something that I know how to setup on older versions of the Windows operating system. However, Microsoft has now dropped support for all of those operating systems and my much more limited
experience with the currently supported operating systems reveals that changes to the boot process will necessitate making changes to the specific preparations needed to build such an environment.
Before recommending that my friend replace all of her computers with new ones, that includes paying for new operating system (i.e., Windows) licenses, I need some assurance that the new operating systems are as
good as the old ones in this respect. These need to be relatively inexpensive desktop computers and we're only talking about a few of them. Let's say fewer than half a dozen. My friend is a sole proprietor and even though her business has become completely
dependent on what was once called personal computers she must operate on a fairly tight budget. This especially includes the budget for technology.
The articles I've been able to find on the Microsoft support websites seem to treat multi-boot as a situation where someone is running different versions of possibly difference operating systems whereas my need
to produce a single image that will both run on multiple computers as well as multiple partitions on the same computer. I'd appreciate finding some technical advice that applies to building such a system using a supported version of Windows.

I tried the image creation/restoration described by Jared. I don't think it makes much sense to rely on an operational system to do such a restoration therefore I opted for method 3 which involves using a "System Repair Disk". My first
reaction is what a crude tool. The image creation process had no trouble putting the image on a simple network share. However, it appeared as though the restoration couldn't even connect with the device. I then copied the files to a USB drive.
In this case the repair disk said it couldn't find the files even though they were there. It offered no mechanism to even look and see what was there. It appears as though it will only find the image if it is located in a folder by the certain
name used on creation and it is in root directory. Not very handy.
As ugly as all that was when we finally come to the point of making the restore it looks like the only option is to restore the entire disk, which in my case would mean also restoring both the windows partition and the recovery partition. This just
isn't what I want to do. It is also something I wouldn't even consider doing unless it was the only possible way to recover from a failed hard drive.
In summary, unless I've completely failed to notice how it works that just isn't going to work.
I hope there is something better than this. What about WinPE and ImageX?
Absent anything useful from Microsoft it will be necessary to try using other software. Time to try Acronis! I guess.

Conflict resolution including the CRT DUMMYfor Add-On ST-SER rel.700_2007_1

Dear all,
Environment #    32 bit win2k3, SAP   & Orc with 10.2.0.2.0
We are in process of applying suport packs for Solution manager 7.0, SAPKITL25 is finished
When applying SAPKITL26 with SAPKB70015, SAPKA70015 I am gettign the following CRT is required
ST-SER rel.700_2007_1 .
I did this add-on & applied support packs for this component ST-SER rel.700_2007_1 - 1,2
& tried SAPKITL26 with SAPKB70015, SAPKA70015 again but the error repeats . What is the last support pack in 32 BIT sap system fo Solution manager.
Error -
Phase ADDON_CONFLICTS_?: Explanation of Errors
onflicts were found between the Support Packages that you want to
mport and the Add-Ons installed in the system. To guarantee the
onsistency of your system, the import is interrupted until all Conflict
esolution Transports (CRTs) for the listed Support Packages are
ncluded in the queue.
o include the CRTs in the queue, proceed as follows:
Write down the Support Packages and Add-Ons that have conflicts.
Leave this screen by choosing 'Cancel' (F12).
Load the CRTs for the Support Packages with conflicts from the SAP
Service Marketplace or request them from your Add-On supplier.
Define the extended queue again in the Support Package Manager.
Import the queue. The Support Package Manager executes all steps from
the beginning.
f the problem involves an SAP Add-On, see SAP Note 53902, which tells
ou which CRTs resolve the conflicts. Otherwise contact the supplier of
our Add-On for details on how to proceed.
he following contains a table of Support Packages for each Add-On for
hich conflicts were detected. The column 'Information on the Conflict
esolution' specifies how you can resolve a conflict. For more
nformation, select the corresponding 'Information for the Conflict
esolution'.
onflicts Between Add-On ST-SER 700_2007_1 and Support Packages
omponent    Release      Support Package        Information on
                                                Conflict Resolution
T           400          SAPKITL426             CRT: DUMMY
Is this a known error or how to overcome this & clues on the following..
-Rahul

Dear Sunny,
I went through the sap notes & found that i need to download ST-SER 700_2008_1.
SAP Solution Manager 7.0 (Software component ST 400)
ST 400 SP16 (SAPKITL426)
With SP16 (SAPKITL426) SAP strictly recommends to upgrade your ST-SER tothe release 700_2008_1 or higher. Therefore use transaction SAINT instead of transaction SPAM to patch your system to SAP Solution Manager 7.0. If you try to patch your system via SPAM and your ST-SER release is 700_2007_1 or less you will receive one of the following information within SPAM during phase ADDON_CONFLICTS_?:
                    a) Conflicts Between Add-On ST-SER 700_2005_2 and Support Packages SAPKITL426 Include CRT
                    b) Conflicts Between Add-On ST-SER 700_2006_1 and Support Packages SAPKITL426 Include CRT
                    c) Conflicts Between Add-On ST-SER 700_2006_2 and Support Packages SAPKITL426 Include CRT
                    c) Conflicts Between Add-On ST-SER 700_2007_1 and Support Packages SAPKITL426 Include CRT
                    *Please be aware there is no physical Conflict Resolution Transport (CRT) available to solve this conflict (it is not planned to provide such a CRT). You have to patch your system via SAINT not via SPAM:*
                    1. Delete your SPAM-QUEUE by pressing the Display/Define button within SPAM.
                    2. Download all ST-SER Delta-Upgrade packages from the Software Download Center into your EPS-Inbox.
                    3. Call transaction SAINT and press Start button.
                    4. Select ST-SER 700_2008_1 or higher and press Continue button
                    All neccessary component packages will automatically be included into a valid SAINT-queue
but ST-SER 700_2008_1 not available to download & also noticed there are no manual CRT's
how should i manage to patch system with ST-SER 700_2008_1 when it is not availble to download
Thanks & regards,
rahul

Yast installation problem on Oracle Enterprise Linux Rel 5 Upd 2

Hi,
I installed Oracle Enterprise Linux Rel 5 Upd 2 on a new server (Intel 64 bit) with the downloads from oracle
(Enterprise-R5-U2-Server-x86_64-disc1.iso till Enterprise-R5-U2-Server-x86_64-disc6.iso).
Then I wanted to install Yast for administering my machine and downloaded yast_el5_x86_64.tar, again from Oracle. Running the Yast install routine it required the perl-Digest-SHA package. I downloaded that from Oracle ULN and installed it.
Now, running the Yast install routine again, I get a bunch of warnings and errors about failed dependencies and NOKEY's.
Here I copied a part of it:
warning: liby2util-2.13.8-0.12.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: blocxx-1.0.0-17.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libxcrypt-2.4-12.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: testutf8-1.0-1.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-core-2.13.39-0.3.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: hwinfo-13.57-2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-hardware-detection-2.13.7-0.9.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: libzypp-2.15.10-0.4.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies
+     libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+     libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
warning: yast2-pkg-bindings-2.13.117-0.13.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     libzypp >= 2.4.0 is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
+     libzypp.so.215()(64bit) is needed by yast2-pkg-bindings-2.13.117-0.13.x86_64+
warning: yast2-2.13.104-1.0.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2-pkg-bindings >= 2.13.111 is needed by yast2-2.13.104-1.0.x86_64+
warning: yast2-network-2.13.98-0.7.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2 >= 2.13.90 is needed by yast2-network-2.13.98-0.7.x86_64+
warning: perl-Parse-RecDescent-1.80-259.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-gettext-1.05-13.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: perl-X500-DN-0.28-133.2.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
warning: yast2-pam-2.13.5-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     yast2 is needed by yast2-pam-2.13.5-0.11.noarch+
warning: yast2-mail-aliases-2.13.8-0.11.noarch.rpm: Header V3 DSA signature: NOKEY, key ID 1e5e0159
error: Failed dependencies:
+     libzypp.so.215()(64bit) is needed by yast2-perl-bindings-2.13.11-0.17.x86_64+
+     yast2 is needed by yast2-security-2.13.7-0.11.noarch+
+     yast2-pam is needed by yast2-security-2.13.7-0.11.noarch+
+     yast2 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2-network is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2-pam >= 2.13.5 is needed by yast2-ldap-client-2.13.27-0.11.noarch+
+     yast2 >= 2.13.70 is needed by yast2-country-2.13.52-0.9.x86_64+
+     yast2 >= 2.13.85 is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2-network is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2-pkg-bindings >= 2.13.101 is needed by yast2-installation-2.13.192-0.4.noarch+
+     yast2 is needed by yast2-users-2.13.55-0.4.x86_64+
+     yast2-pam is needed by yast2-users-2.13.55-0.4.x86_64+
What's wrong here and what is to do?
I only installed packages from Oracle on a newly installed machine. And I didn't find documentation regarding these problems.
Any help would be greatly appreciated,
Roger

error: Failed dependencies
+ libboost_filesystem.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+
+ libboost_regex.so.2()(64bit) is needed by libzypp-2.15.10-0.4.x86_64+As error message clearly states you need to install additional OS packages (included in installation media or in online repository) to solve the dependencies.

Trying To Re-install Windows 8 on Relatively New GT70 Laptop

Greetings ~!
If you don't mind, I'd like to take a moment to introduce myself. I'm not an expert, when it comes to computers; but I'm not a novice either. However, I am new when it comes to RAID. My laptop is still pretty relatively new - I customized and bought it in June 2013, and it arrived in July '13. Since my desktop pc was dying out, and our family does a lot of traveling during the summers, I was looking to convert to a laptop that would give me the same performance my desktop had, but would be portable. I spend most of my time as a researcher and digital artist, but I'm also a freelance web designer-developer and photo/video editor on the side - when time allows (I'm a married mom of 5 - time is precious, if you know what I mean. ). I custom built my desktop, back in 2006, with the help of two very dear friends who've done this for a living - back then, I was an avidly active gamer and wanted a system that would greatly support those highly-graphic intensive games (i.e. Crysis, BioShock, etc.); but I'm not as much into them anymore (now, when given the opportunity and I need a brain-break, I'll play logic and strategic puzzle-like games).
Here is a brief summary of my specs :
Processor: 4th Generation Intel® Haswell Core™ i7-4900MQ (2.8GHz - 3.8GHz, 8MB Intel® Smart Cache)
Graphics Video Card: NVIDIA® GeForce™ GTX 780M 4,096MB PCI-Express GDDR5 DX11 w/ Optimus™ Technology
Ram: 32GB DDR3 1600MHz [SKU-818CP] (Dual Channel Memory (4x8GB SODIMMS))
mSATA SSD Drive - Configuration Option: mSATA Option: Operating System Installed w/ mSATA(s):
- 2 mSATA SSD Drives: 128GB Solid State Drive (Super RAID) mSATA - [ In Primary Hard Drive Bay ]
- Second Hard Drive: 1,000GB (1TB) 7200RPM Seagate Hybrid (Serial-ATA III 6GB/s - 64MB Cache)
Wireless Network: Bigfoot Networks Killer™ Dual Band Wireless-N 1103 - 802.11A/B/G/N Wireless LAN Module
Operating System: WINDOWS 8.1 Pro - (64-bit) [at the time of purchase, I had upgraded to Windows 8 Pro 64-bit]
--- I also bought the Creative Sound Blaster X-fi Surround 5.1 Pro external soundcard for my Logitech Z-680 5.1 Configuration 500W speakers (which continue to work perfectly to this day); but when things started going awry with my laptop, the soundcard stopped working properly (all 3 of my 3.0 usb ports seemingly stopped working - they're not ?powering out as they were when I first got my laptop).
--- I just recently bought two external/portable drives from Seagate : Backup Plus Slim (1T) and Expansion Desktop (3T)
My laptop started to become awry back in December/January '13 when I got the wild idea to try out a different internet security program. I had been using avast! for years (w/no problems), but I wanted something that would be more beneficial to me in covering the Windows 8 apps (my desktop was a WinXP system). After spending several days, on and off, reading through reviews over current I.S. programs, I thought I'd give BitDefender a try (they developed a program specifically for Windows 8), so I downloaded and installed their trial version. Upon installing the program, I was prompted to remove/uninstall avast - which I did. After installation proved successful, and things 'seemed well' with my system, I noticed that avast left traces of its program throughout my computer (this is a huge peeve of mine - when uninstalled programs leave icons and hidden files spread out all over your computer). This triggered a prompt to check my graphic/video editors to see if they were still working properly. Well, to my disappointment, one of my editors wouldn't even launch and load. I tested another editor, only to find out that my plugins wouldn't launch and load. By this point, my "peeve" turned into severe frustration. Having dealt with a program that left traces/?breadcrumbs before, I pulled up the trusty recommendation page (that I bookmarked from its tech support), and followed through the instructions on how to manually remove the program - which then proved unsuccessful. So, I thought ... 'what should I do now? ... ahh, let's try a system restore!' Not only did the system restore seem successful, it also brought back the problems with it. *grrr* After talking with a MS tech representative and other tech support representatives (for my editors), I was advised to re-install Windows - they told me my system files were corrupted, and that each time I performed a system restore, I was just bringing back the corruption. In the short time that I've had this laptop, I've already built up quite the collection of 'data', from projects I had been working on (nearly 500 G's worth). Since I didn't have any backup devices at the time, I had to wait until I was able to buy one (which, I finally received two weeks ago). I was also in the midst of another project that I wanted to complete before wiping everything out (I had set up a local server to work on this project). While the project is not entirely complete, it is at a safe point where I could back it up. The day before yesterday, I backed up all of my work and data to my Expansion Drive, and downloaded all of my laptop's drivers to my portable 'slim' drive. On top of dealing with my computer issues, we have been dealing with extremely annoying 'internet' issues (w/our provider), which was prolonging the progress of completing my project ... but it 'supposedly' got resolved last week (FYI: internet services around the Atlanta area are disappointingly lacking in reliability, sufficiency, and options - which is dominated by only 2 companies, and neither provide the highest speeds available in the market, like in other areas).
Now, I am at my wit's end trying to figure out how to re-install my Windows OS. I have wasted my entire day, yesterday, trying the various recommendations to get this done, and I haven't gotten anywhere with it (aside from downloading every driver that I'll need, once the installation proves successful). Is anyone familiar with re-installing Windows on a RAID set-up? I've already sent in a support ticket, but the reply was it may take up to 48 hours for them to respond? If I can get this resolved sooner, I'd be much happier - right now, I'm the grouchiest person on the planet. heh Per this recommendation - resetting Windows (service.msicomputer.com/msi_user/TechFAQdetail.aspx?formid=3035), that I tried to perform, I get a message that tells me a partition is missing - no error code was given (I'm not certain what that means, but I haven't "deleted" any partitions - much less, I haven't even messed with anything that is "partition" related; I'm assuming this has to do with the RAID set-up? Although, I did perform a complete system defrag about 2 months ago - could this have been the culprit?). I get the exact same message for this recommendation (alternate route to reset Windows), as well : (service.msicomputer.com/msi_user/TechFAQdetail.aspx?formid=3034) - partition is missing. When those two didn't work, I inserted my Windows 8 disc, to attempt re-installing it that way - it was unsuccessful. The only message it gave me was that it was not able to complete the install (no error codes and no other messages were given). As for this recommendation (a .pdf file with instructions) - service.msicomputer.com/msi_user/TechFAQdetail.aspx?formid=3034 - it's referring to a slightly different laptop than mine. It's for the GP line of laptops. Mine is a GT70 2OD (w/GTX 780M - msi.com/product/nb/GT70_2OD.html#download). I downloaded all of the drivers, utilities, BIOS, and firmware for Win8.1 64, but I also downloaded the Intel RAID driver for Win8 64. Something in my gut tells me not to follow the instructions per this last recommendation, that there is a correct way to go about it - I'm just not certain what it is? I feel like it has to do with that Intel RAID driver - like instead of using the WDHybrid driver that was suggested in that recommendation, I need to use the Intel RAID driver? but what about the other driver that's mentioned in the .pdf file (WD Boost Driver)? See, I'm worried that if I choose to go with this last recommendation, it will that permanently disable the RAID? Admittedly, my understanding of how RAID works is a bit limited, especially when it comes to this issue. Right now, I have all of the drivers downloaded to my pocket backup drive (Seagate Slim Backup Plus) - so if I need any of those files for installation, I'll be able to access them via USB.
Please forgive me for the lengthy post. I wanted to provide enough details that will hopefully assist getting this issue resolved a little more quickly. I'm trying to recover from pneumatic bronchitis (and the "severe persistent asthma" nightmare it triggered); so I've already been struggling with stress, panic, and frustration. This looming computer-related issue is seemingly intensifying those feelings. I'm having a hard time thinking straight ... if ya know what I mean. heh I really hate wasting days, when I really don't have days to waste and nothing gets resolved or accomplished. I inherited an 'engineering gene' from my dad, so I've always been the type that prefers to fix things myself, test things out, and learn as I go along; and I've been pretty successful in doing so. Mind you, I don't go about fixing and testing things blindly, without researching about them first; but when you're not feeling well (feeling 'out of sorts') and reach higher levels of frustration and stress ... it seems next to impossible to focus and get things done right.
If anyone is able to help me, I will GREATLY appreciate you~!
Thanking you in advance~!

Quote from: lcwhitlock on 04-April-14, 13:44:09
Hello darkhawk,
Thank you for the recommendation. I somewhat understand what a MS DOS disk is, but I'm not sure how to go about creating one. I've seen where you can use a program, like Rufus, to create a usb one - but I'm leery about using 3rd-party programs (especially ones I'm not familiar with). I've come across a couple of 'how-to' tuts, but they didn't clarify what files (if any) I would need to include on the disk (for my particular situation). Right now I don't have any blank cds, nor any extra flash/thumb drives - wish I did, but hadn't needed these for years. There has only been one other time where I needed to re-install Windows, but that was over 15 years ago - I did it through BIOS, reformatting my drives, and then reinstalled via the Windows XP disk. Windows 8 is an entirely different breed, which has left me feeling a bit stumped, at times. If there was a way I could perform it (successfully), similar to the first time I did it years ago, I'd give it a try - but at the same time, I'm a bit reluctant, because if it doesn't work, then I'm stuck without any internet access to get further help.
Ask and ye shall receive. This should be doable in Windows 7 and Windows 8 on another PC. I recommend using a USB Flash drive like in this tutorial, but I'm sure you could use something else.
If you want, you could also use Hiren's BootCD to make a bootable CD with many options and programs on it (I keep one, just for certain situations) that will allow you to do the same things.
http://www.hiren.info/pages/bootcd
Also very useful for sorting out virus's as long as it's downloaded and made on another PC that is virus free......

Read Master Data for Process order status change (REL to CRTD)

I am unable to read master data and thus change the status of process order from REL to CRTD. (COR2)
The reason it says, error in BOM reading, Transport Requirement (TR) already generated.
Even after deleting the TR (LB02), the issue still exists.
Is there another way of changing the status or some more steps are needed for the TR deletion?
Thnx!
Abhi.

Order header Status-
REL Released
MSPT Material shortage
PRT Printed
PRC Pre-costed
BASC Batch assignment complete
BCRQ Order to be handled in batches
SETC Settlement rule create.
In the error log it gives-
Diagnosis
Transfer requirements have already been generated, so therefore the bill of material cannot be read.
System Response
The system does not execute the action.
Then I deleted the TR (LB02), but still I cannot reread the master data.
The MSPT was for only 2 materials out of 6 and there is no GMPS status.
There is prod supply area and control cycle used.
and the TR generated at order release.

Forms 10g rel.2: new behaviour when accessing the db and not logged on

If I start a form and I'm not connected, then I have a problem with one of my standard-logon-routines.
This behaviour is new in 10g rel.2 I think.
If I start a function on the db and the form is not connected I get a FRM-92101 - There was a failure in the forms server during startup...
This is a migrated form, which runs in 6i, 9i, 10g rel.1, but not in rel. 2.
Who nows a workaround ?

see my post in this thread:
FRM-92101 when user tries to log on with invalid password

I'm relatively new to Mac and want to try and get the most out of the new MacBook Air.   My wife and I have been sharing the same Apple ID. We both have iPhones - she has a 5 and I've got a 4S.   We only have one copy of iTunes and we have been sharing t

I'm relatively new to Mac and want to try and get the most out of the new MacBook Air.
My wife and I have been sharing the same Apple ID. We both have iPhones - she has a 5 and I've got a 4S.
We only have one copy of iTunes and we have been sharing the account. (She doesn't really use the computer for anything beyond writing the odd weekend assignment.)
Would I be better off setting her up with her own and making her as a separate user on the computer? Would this require much work?
In recent times with updates, we have a few problems with the duplication of texts and that sort of thing. Both of our texts are stored on the computer and that sort of thing. Also, sometimes texts I send her are sent through to me from her, if that makes any sense.
Anyway, I don't really want to overly complicate matters when it comes to accounts etc, but I wanted to know if a fresh Apple ID would be the best thing or even a new user?
Any tips etc would be greatly appreciated
Thanks in advance
MacBook
I have this question too (0) Reply

Your question is almost too much a personal one, begging the question "do we (husband and wife) feel comfy sharing one account on the Mac"   maybe thats why nobody answered you.
It doesnt complicate anything, but it adds steps for switching accounts on the Mac/ purchases etc. of course
since your question is mostly personal, ..I wont answer THAT part of it, but creating a new account is easy.....messing with switching back and forth is also a personal preference 'issue' as well.   I prefer to keep things simple, but...........you and yours, I dont know.......
http://support.apple.com/kb/PH11468

How to set CRTD- REL for a project consist of more than 100 WBS elements

Dear Experts,
Now our clients is encounting such a problem:
There is a WBS structure consists of ONE Level 1 WBS code, serveral Level 2 WBS code and hundreds of Level 3 WBS code. All the Level 2 WBS are created automatically according to the data transferred from another system via interface. Level 1 and Level 3 WBS can be created mannually in project builder. And all the status of Level 2 WBS are set to CRTD once they are created automatically.
Level 1 WBS(Let's call it A) has already been set to REL. Only one Level 2 WBS (let's call it A-00) was still CRTD because *it was created after level 1 WBS A was set to REL.* And there are as much as 120 Level 3 WBS(let's call it from A-00-01 to A-00-120) was created under Level 2 WBS A-00 mannually. Now how can I set all the level 3 WBS status from "CRTD" to "REL"?
I have tried following two methods but both of them are failed.
A. Directly set Level 2 WBS A-00 or Level 3 WBS A-00-01to REL (in both CJ20n and CJ02) but the system show a Message No. BS013 falut:
Object A has system status REL, According to this status, transaction "Particially release project" is not allowed"
B. Set Level 1 WBS A to REL(in both CJ20n and CJ02) but the system runs extremly slow and finally the feedback comes to a ABAP error of "Run time error" after more than 30 minutes.
Did any of you face similar situation? Any suggestion for this issue are appreciated.
Regards,
Atom
Edited by: Atom2009 on Dec 4, 2009 1:36 PM

Check the settlement profile used in the WBS elements and project. The configuration could be such that the settlement rules are limited.
Maximum number of distribution rules
Maximum number of distribution rules for each settlement rule.
You cannot settle receivers for which there are no distribution rules.
The IMG path for this in PS is Project System -> Costs -> Automatic and Periodic Allocations -> Settlemennt -> Settlement Profile -> Create Settlement Profile.
Hope this helps.
Edited by: Paul Shrewsbury on Dec 8, 2009 12:49 PM

Dbms_ldap ORA-31203: DBMS_LDAP: PL/SQL - Init Failed ( 9i rel. 9.2.0.1.0)

Hi,
I have a strange behaviour with the package dbms_ldap. I work with Oracle 9i, rel. 9.2.0.1.0 .
I have the hostname xxxx.yy .
The ping gives me this IP number:
H:\sql>ping xxxx.yy
Ping xxxx.yy [10.159.29.41] mit 32 Bytes Daten:
Antwort von 10.159.29.41: Bytes=32 Zeit=5ms TTL=125
When I use the softerra ldap browser 2.6, I can specify as host: xxxx.yy and I receive the answer with no problem.
But when I use the dbms_ldap package, this hostname fails.
SQL> @search;
DBMS_LDAP Search Example to directory ..
LDAP Host : xxxx.yy
LDAP Port : 389
Error code : -31203
Error Message : ORA-31203: DBMS_LDAP: PL/SQL - Init Failed.
Exception encountered .. exiting
But when I use the IP adress instead of the hostname, all works fine.
SQL> @search;
DBMS_LDAP Search Example to directory ..
LDAP Host : 10.159.29.41
LDAP Port : 389
Ldap session : A88E6340(returned from init)
simple_bind_s Returns : 0
search_s Returns : 0
LDAP message : 08866340(returned from search_s)
Number of Entries : 1
dn: CN=aaaaaa,OU=9.4,OU=9,OU=Central Administration,OU=xxxx.yy,DC=xxxx,DC=yy
cn : aaaaaa
displayName : ....., .....
givenName : .....
sn : .....
===================================================
unbind_res Returns : 0
Directory operation Successful .. exiting
NB. when I use another hostname: zzzzz.xxxx.yy having the same IP address, also all works fine.
H:\sql>ping zzzzz.xxxx.yy
Ping zzzzz.xxxx.yy [10.159.29.41] mit 32 Bytes Daten:
Antwort von 10.159.29.41: Bytes=32 Zeit=5ms TTL=125
SQL> @search;
DBMS_LDAP Search Example to directory ..
LDAP Host : zzzzz.xxxx.yy
LDAP Port : 389
Ldap session : A88E6340(returned from init)
simple_bind_s Returns : 0
search_s Returns : 0
LDAP message : 08866340(returned from search_s)
Number of Entries : 1
dn: CN=aaaaaa,OU=9.4,OU=9,OU=Central Administration,OU=xxxx.yy,DC=xxxx,DC=yy
cn : aaaaaa
displayName : ....., .....
givenName : .....
sn : ......
===================================================
unbind_res Returns : 0
Directory operation Successful .. exiting
Is there a possibility to overcome this problem?
Thanks

Problem solved - (Problem gelöst :)
using 9i rel.9.2.0.7 all works fine
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
With the Partitioning option
JServer Release 9.2.0.7.0 - Production
DBMS_LDAP Search Example to directory ..
LDAP Host : xxxx.yy
LDAP Port : 389
Ldap session : 00000001(returned from init)
simple_bind_s Returns : 0
search_s Returns : 0
LDAP message : 00000001(returned from search_s)
Number of Entries : 1
dn: CN=aaaaaa,OU=9.4,OU=9,OU=Central Administration,OU=xxxx.yy,DC=xxxx,DC=yy
......

Issue in Release strategy for PO while adding intermediate rel code/Strateg

Hi Experts,
we have Existing release code 10,20,30,40,50 & 60. Now, we tried to add an intermediate Release Code(say 25) & release strategy(say R3) in existing release set up for PO.
And NO pre-requisite is defined ; final release by the last rel code.
However, the system shows release possible by 30 & 40 for last release strategy also. It`s showing the alternate release as release possible.
Pls throw some light on resolving the issue....
Regards,
Ganesh S....

Thanks Ajit.
I mean the release should get afftected only after release 60. (i.e. final approver) That`s the way it`s been working.
Now, while I tried adding 1 more rel code in between ; it`s afftecting the release with (20+40) instead of the intended 60.
BR,
Ganesh

How you can solve a problem or find out on a dead pc if the problem relies on motherboard and not on processor or vice versa

hi.
I am working myself with computers , so there is one thing in my mind I wanted to be sure,which I couldn't find an answer for it!
because I had before totally black screen and the problem was damaged processor.
I am wondering how I can be sure as the last option when I get a black screen and there is no lihgts at all no any LED is lighting.totally dead pc.
how you can be sure then that the problem relies on processor and not on motherboard or vice versa the problem relies on motherboard and not on processor
because I can't say to the customer lets buy first a processor if it is the cause of dead PC and if not then we buy motherboard. this sounds not wise.
so I experimented first with my latop ,I pulled out the processor to see if I can see any LED light or any movement on the motherboard to be sure that motherboard giving me some clue that it is healty. I gave some light heat to de fan to let it turn ,because
it is working with heat sensors then I know that the motherboard is healty. but it didn't work.
I did the same with my desktop computer and the result is the same no any lights and no any movement on the motherboard . so now can some one tell me how you can distuingish as a last result which of this 2 components is causing dead PC. is there any
tool to test the motherboard or how asus,dell ect. they solve such a problem if the customer send to them a dead pc.
I know that the power supply also can cause dead pc but I know how to solve a problem with dead power supply. and I want to keep away power supply from this question. please do not tell me that Idon't have to pull out processor
because I am a technician and both of my computers are doing very good after this experiment.
thanks
johan
h.david

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road.

Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road while driving. For that reason, I'm also not interested in adding in headphones or additional devices that have the desired button functions. Going both forward and back would be great but I would be pleased just to have a "sight-free" way to go forward.
I've seen some mention here and there about ways to maybe change it so the volume buttons change tracks and holding the volume buttons changes the volume... but I don't know what's involved in that or if its even possible/recommended for a new 5th gen iPod. I think its a great device but its sadly lacking in music oriented functions and features... which is disappointing since music is why most people would bother getting one instead of some other "iDevice" :/

Given that you cannot do what you have asked for, perhaps you simply need to find another solution to your root problem.
Presumably, you want to skip to the next track because you don't want to hear the current one, and that is because...
You don't like it.
You've heard it recently and don't want to hear it now.
Simply don't want to hear it at this time.
For problem number 1. Don't put it on the iPod in the first place. (I know, obvious answer!)
For problem number 2. How about playing from a Smart Playlist (initially created in your iTunes Library) which has only songs you've not played recently?
For problem number 3. Hhhmmm! Create alternative Playlists for use in the car.
As for going back to the start of the "now playing" track.... Well, if your Playlist has only songs that you really, really want to hear, then you'll be looking forward to that rather go back to the beginning of the current song.
I'm not trying to be prescriptive, just giving you food for thought.
(They are all cheaper options than buying a car which can control the iPod from the steering wheel.)

ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:la

I have all these errors, can anyone help with this all means? trying to get my book published in iBooks. Nedd your help. Thanks, Jo
ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:lang"" at Book (MZItmspBookPackage)
Use of the block quote element can cause ePubecheck to give the error "text not allowed here". Text must not be alone inside of a body tag and if it is not enclosed in some other block level tag, this may lead to the error you are receiving.

I have all these errors, can anyone help with this all means? trying to get my book published in iBooks. Nedd your help. Thanks, Jo
ERROR ITMS-9000: "index_split_000.html(257): attribute "name" not allowed here; expected attribute "accesskey", "charset", "class", "coords", "dir", "href", "hreflang", "id", "rel", "rev", "shape", "style", "tabindex", "target", "title", "type" or "xml:lang"" at Book (MZItmspBookPackage)
Use of the block quote element can cause ePubecheck to give the error "text not allowed here". Text must not be alone inside of a body tag and if it is not enclosed in some other block level tag, this may lead to the error you are receiving.

Frequent (inevitable?) crashes while USING the product (latest FF prod rel.) normal (even without Adobe Flash disabled)?

Hi,
I am quite happy with the way FF is more advanced than Chrome while handling >1 windows with >1 tabs open in. However, I am looking for (more) stability. Please note that I have opted to not use flash with this (always latest prod rel) browser and if I need to view a flash site, I use other browsers. However, while this helps with CPU usage and memory utilisation, the browser still ends up crashing even with no special plugins/extensions (bare minimum) installed (aside from vanilla/defaults):
Submitted Crash Reports
Report ID Date Submitted
bp-1d1e0e04-9b4a-44b8-a184-562f02150417 4/17/2015 4:48 PM
bp-05f8e5c4-a1af-4047-b4d1-a036d2150415 4/15/2015 7:23 AM
bp-c8eadb8c-6fbb-45e7-9bfe-c762c2150414 4/14/2015 7:45 PM
bp-a459da76-388f-44aa-b2fa-a1ebe2150409 4/9/2015 4:59 PM
bp-bb5c6f0e-1b3e-4f17-913f-e55d82150417 3/21/2015 1:32 PM
bp-d46bb67c-8ec7-424c-a6d9-ae8a92150321 3/21/2015 1:32 PM
bp-609096f7-f582-491f-a435-c95072150317 3/17/2015 6:52 PM
bp-cad2f8e5-cc7f-4ddb-9f84-519182150317 3/17/2015 1:51 PM
bp-e6f488cc-71b0-47d3-ae8d-23d2c2150317 3/17/2015 12:41 PM
bp-90e81406-5e29-4d5a-a143-5fc8a2150309 3/9/2015 3:54 AM
bp-0d5d9287-1a28-48ac-88ec-4456a2150309 3/9/2015 3:41 AM
bp-40cb93c1-ab6c-471c-83a2-73ce82150217 2/17/2015 8:04 PM
bp-d843115c-5372-4e48-b721-e3c2b2150209 2/9/2015 5:38 PM
bp-0aae5a69-caf3-44e4-ad8f-3749448386b8 1/19/2015 4:19 PM
bp-05842690-5263-4bfa-a6ee-702892141228 12/28/2014 10:26 PM
bp-a9dfe93d-1c81-45a4-9f86-c58a62141210 12/10/2014 1:36 AM
bp-027c7e96-e5c1-49a3-a0d2-6b5602141118 11/18/2014 2:10 PM
bp-84394ec2-afe0-448e-90a1-1a6582141108 11/8/2014 5:55 PM
bp-f7062649-9b6b-4a01-aed5-fe89f8641b4a 10/31/2014 4:07 PM
bp-2829a562-d08c-4b75-af59-2226d2141015 10/15/2014 9:08 PM
bp-ef2d6c83-7295-491f-ac43-e111b2141011 10/11/2014 10:58 PM
Could anyone help me out with this please?
Much appreciated/great product!

The 3 latest crash reports are somewhat diverse and I don't think point to one single problem:
* Problem rendering canvas drawing, possible display driver incompatibility
* Out of memory error with many possible causes
* Out of memory in image decoding
Could you try disabling Firefox from using hardware acceleration? New versions of Firefox sometimes become incompatible with existing graphics card/chipset driver software that wasn't used by enough testers to pick up the problem.
"3-bar" menu button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
This takes effect the next time you exit Firefox and start it up again. Any difference?
Since hardware acceleration improves the appearance of fonts and animations, you may want to check your computer manufacturer's website to see whether any graphics card/chipset driver updates are available for your system. Or maybe with Windows 10 you are limited to drivers from Microsoft??

Is it a bug in Oracle 10g rel 1

I have server installed in Oracle 10g rel 1 and I have client installed as oracle10grel2. I am unable to export data from client machine. It is giving me a error. Can anyone help me out.
Regards
Vijay Kumar

You need exp from 10gR1.
Oracle works in downwards compatibility mode.
This means lower version clients can connect to higher versions server, not necessarily the other way around.
exp is a specific case as exp has sql statements hardcoded in the tool.
Those statements are version specific.
(One would wish Oracle would change exp to bail out immediately when connected to a lower version database)Due to this only, I need the URL for client of version 10g rel 1 for the server 10g rel 1.
Regards
Vijay Kumar

8.0.5 & 8.1.6 rel 2

Similar Messages

Maybe you are looking for