8.0 to 8.2 upgrade: ¿would it affect configuration and/or licensing?

Hello team:
I am planning the upgrade of an ASA 5550 Active/Passive cluster from 8.0 to 8.2 according to the "zero downtime upgrade" documentation available in the web.
I do not have another cluster for comprehensive testing, but I executed a simple migration procedure on a tiny 5505 and neither licensing features nor the configuration (the command sintax) were affected by this process. I know this is something to care about if you go to 8.3, but this is not my case.
I browsed the release notes of 8.2(5) and no special disclaimer was found by me with respect to this release. So everything should work just fine, but I would like to double check for input with respect to these two subjects:
1. ¿Will the licensed features (vpn, concurrent connections, etc) be preserved?
2. ¿ Will the configuration be preserved ?
Your recommendations will be greatly appreciated.
Thanks a lot in advance.
Rogelio Alvez
Argentina

An ASA 8.0 to 8.2 upgrade should not affect configuration or licensing. I have done it many times without any problem. Just follow the published procedure carefully and you will be fine.
While you are working on the boxes, I recommend putting ASDM 6.4(7) on them (if it is not already in use) as it is the recommended version for all 8.x releases.

Similar Messages

I have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated

i have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated
i have also tried 4 different chargers both official apple and non official

i have tried this but still not working i found a way of fixing it by restoring the phone but this has now put my phone in recovery mode and when i try to fix it i get an error 14 which i have no clue what it means

I would like to upgrade to the next step, but because I have many problems with the version 10.4.11, I'm worried that upgrading would create more problems.

Due to a misunderstanding with [email protected] in September of 2010, many of my applications and important files were put into the trash during a cleaning. The trash hadn't been deleted, so a CleanApp rep told me to drag my important files to a folder on my desktop. They were unable to help me with anymore advice with the exception that if I followed the pathway of the application, I could manually restore it to its proper location.
This was asking a lot of me because I didn't have the experience or knowledge of undertaking such a massive restoration. However, I did the best I could. What had been put in the trash was not just a few files -- there were hundreds of files or apps that I discovered in the trash. As I said, this was a misunderstanding. I was left feeling devastated at what had happened.
Since then, my iMac Intel Core Duo has been running on its last legs. I'm surprised I can even get to my email. As far as using the software that I bought with my iMac, I can't. I just do the basics.
What I have been wanting to do is to upgrade to the next level. However, I worry that if I upgrade a crippled OS X 10.4.11 Tiger, I would be creating more problems than what I already have. Do you agree that an upgrade would make matters worse?

It won't necessarily make it worse, but may not make it better. I am not familiar with the utility you usedm though anything that cleans or maintains your Mac should be avoided unless you know what you are doing and what it does. Probably re-installing software from the official sources (download or CDs) is the best way to ensure missing parts are all replaced.
If this is a core duo and not a core 2 duo then the highest you can go is Snow Leopard 10.6 Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac", then "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present).

I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have be

I am running XP SP2 fully patched. I recently upgraded to 3.6.3 and since then, clicking on an icon that normally would open another windows (for example, a printer-friendly version of the current web page), nothing happens. In these situations, I have been forced to go to IE or Crome in order to accomplish what I need to do. Very frustrating. Also clicking in the slider area has no effect. "Page Up" and "Page Down" keys work. Holding down left mouse button on slider works. Also very frustrating. Can someone help
== This happened ==
A few times a week
== Upgraded to 3.6.3.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some annonomus file, to which I have to go through several steps to get to My

Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some anonymous file, to which I have to go through several steps to get to My Documents, and I can't seem to select the default in my preferences. HELP PLEASE!!!

Before this update of what software from what version to what version using which OS?

Hi. I am working on a Mac OSX 10.10.2 Yosemite. I'm working remotely with a woman who is using indesign CS8.2 I'm still on CS6.8 and can't open her files. I would like to upgrade to the latest version and I'd also like to know why these upgrades are not a

Hi. I am working on a Mac OSX 10.10.2 Yosemite. I'm working remotely with a woman who is using indesign CS8.2 I'm still on CS6.8 and can't open her files. I would like to upgrade to the latest version and I'd also like to know why these upgrades are not automatic as i pay a monthly subscription to the cloud. Thanks.

A Cloud subscription SHOULD always show you the most recent updates, so you may then choose to do the install
CC desktop lists applications as "Up to Date" when they are not
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
-and added step https://forums.adobe.com/thread/1529654
Yosemite sometimes has problems, often related to "default" permissions needing to be changed
-one person's solution https://forums.adobe.com/thread/1689788
-and a Java update https://forums.adobe.com/thread/1507936
-update breaks things https://forums.adobe.com/thread/1772260
-http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/
-https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

HT201365 Before I downloaded the iOS 7 upgrade I could turn off the apps that were running in the background by double clicking the bottom button to bring up the apps. I would hold down on 1 app, X's would appear on each and then I could close them. How N

Before I downloaded the iOS 7 upgrade I could turn off the apps that were running in the background by double clicking the bottom button to bring up the apps. I would hold down on 1 app, X's would appear on each and then I could close them. How Now?

and
Because my first response would be....Oh, sure.....
Because I am sorry you are having a hassle with the intenet. There is nothing more frustruating than having to deal with a slow response, or a makeshift connection....hope it gets fixed soon!!!
Your friend,
GB

I have a iphone 4 and its broken, i was wondering when i go to my appt sense my phone is broke would i be able to upgrade to 4s or 5 and would it be full price?

i have a iphone 4 and its broken, i was wondering when i go to my appt sense my phone is broke would i be able to upgrade to 4s or 5 and would it be full price?

The condition of your current phone has nothing to do with upgrading to a new phone with your carrier. You aren't trading it in - you keep the old one. It can be smashed to bits and that won't matter.

Why would the Firewire Port and/or External DVD-RW suddenly not work?

Hi, it's me again. I swear, I must be destined to just use Windows machines...
Anyways, I have a used/refurbished iBook G3 500MHz 320MB RAM Dual USB (1 Firewire)laptop running OS 10.2.8 that I bought a few months ago. I went and purchased an external Firewire/USB 2.0 DVD-RW drive as I only had a CD-ROM drive on my machine and I wanted the option to burn CD's or watch/read data from DVD's (I know that with my slow processor writing DVD's -other than data- would be a stretch and have other machines to do that with anyways so it wasn't a concern really). I received it and installed it, also installed the free version of Toast that came with it, and the drive worked fine. I have not needed to use the drive since then and have not used the laptop much at all since then really, but I do need to say that I did end up adding a new user account, though I can't remember if I changed the original Admin account and then still have the one I created myself when I first started the laptop after I bought it (had a fresh install of Jaguar on it, but I have no disk to re-install with if needed) or if I created a separate (new) account and ended up deleting the Original Admin accout (I know in Windows, you cannot delete the original Admin account but I do not know if that is the same for OSX or not). I did this as I wanted a master Admin account that I just wouldn't really use and then wanted the other as my main account (and use it to connect to my home windows network) and for some reason it would not let me put a check in the box to allow that account to do so (from either Apple or my user accounts) and so I know that my main user account now is set up to allow it (was it the old Apple user account or a new one, I can't remember- sorry).
Ok, so that is the back story to my problem, which happens to be this:
I just bought a new chip of RAM (512MB to make it a machine with 576MB RAM total) and as I had been looking at getting OSX Tiger (but didn't want to do it without the extra ram and had been considering Panther instead as well), I thought it was necessary if I wanted to not bog down my machine. I bought the Install Disks on DVD for Panther, as well as an upgrade disk (DVD again) for Tiger, therefore letting me use the External Firewire DVD-RW to install Panther, and if I liked I could go ahead and upgrade to Tiger (and if I didn't like it too much, or it slowed things down too much etc, then I could always go back to panther and have both available for future options). The extra RAM coming in handy here definitely.
So I was going to install the RAM today, and decided to go ahead and test out the External DVD to make sure it could boot from it (before making any changes to my system) and then go and install the RAM, and after that, install Panther to start... But I plugged all the cords and cables in, used my laptop with AC power even, and I could not get the External to show up at all... (kinda like the very current post right below mine but for the G4- it worked before, but now the firewire External just does not show up).
I only have USB 1.1 on this laptop obviously, and I don't even know if you could do a boot from an external with USB 2.0 if my laptop had it (the DVD player does). I was recommended to boot with an external firewire DVD or firewire to another machine with DVD capabilities to do the install. So my problem right now is getting slightly bigger, as of course, I can't seem to momentarily find the stuff that came with the External (spare USB cable to check and see if the laptop will recognize it at least with that and to show it is the firewire that is not working properly, or the disk that I used to install it -might have been only used to install Toast free version if it didn't need any drivers, but I don't know where that or the instructions for installation sheet currently is -- I am looking for it, but I have switched bedrooms just last week and I also seem to be missing a few other Windows laptop disks as well so there is a good chance that they are all together, I just need to figure out where, heh.)
I am waiting currently before installing the memory, though if I don't get the External working tonight, I may go ahead and do it first as at least I will have more memory on my laptop then, until I can get other stuff functioning and be able to do the Panther install.
But my main question is, is there something that would cause an installed external to suddenly not show up in OSX? Since I hadn't used it since that one day, and it was unplugged from the laptop itself, would that end up doing it, or more likely, the changing of the user accounts (though I have been trying to test it with different types of media and through both of my user account (which are both "admin" ones), though I do still have one of those being an account that was on there when the External DVD was first installed, so it really shouldn't have done this at all (one would think). So how big of a chance is it that the firewire has somehow gone dead and this is the main culprit to my wasting the past 4 hours on this???
I am currently scavenging around for an extra USB cable to try and test the External that way and will post the results when I can... I love the look and idea of macs, now I have a mac and want to upgrade it even, but why is it that whenever I attempt to use it after having not used it for a bit (and try to make the iBook feel better by using it more as I am sure it feels sad and alone sitting on the shelf while my Windows Laptop gets more attention), or try to fix it when it can be made better (and therefore used more often), the mac (all macs really), just seem to get all pissy and cause problems and make me spend hours upon hours trying to get things to work again??? You have to admit it, I am "mac cursed"... sigh I can program in 4 or 5 computer languages and am very advanced at many tech things (the ones I am not as good at I am still usually Average or Medium skilled) so it makes me wonder why I have so many tech problems with Macs when they are supposed to be the "easy" OS to use...

Actually, I think I have it all working now. After going back to the Plextor Website, I found out that the switch between the USB and 1394 ports only gets activated (switched over to the other) with you turn the device off first, move the switch and then turn it back on. I was sure that I had done this with the ibook, but maybe not as when I went back and did it with first the USB and then the Firewire cables, it did work. I definitely knew that I had not done this with the Windows laptop, the reason it would not have the USB work for me on it.
but back to the iBook, I was confused as it was only showing up as a DVD-ROM (which I guess is what they do until you actually open up the burning software to then be able to burn to it), and it also had the wrong Model #, which after more research, showed that it was the Internal DVD drive model version (PX-708A) compared to the actual model version (PX-708UF) which is the USB/Firewire (External) model. The firmware was really out of date as well (from June 2004 I think, v1.06) and they had v1.12 from Spet/Oct 2006 available so I went to get that (which was a hassle). They had nice easy Windows self extractor/installer packs, and then the BIN files for use for all systems (Sun OS/ Mac OSX/ Mac OS/ Linux etc as well as usable for Windows), and those needed a special Firmware Updater Application which was OS specific. Only I had the hardest time trying to get the OSX one as it would send me to a FTP site and not give me any clues as to which file(s) I needed to get and the Mac OS version was just for older 9.2 or below versions and didn't want to install under the OS Classic mode.
I ended up using my windows computer which made it easier to view with the FTP stuff as I have FireFTP in Firefox, and downloaded the files I thought I needed (to test out), and then realized my silliness, and just downloaded (as well) the Windows Auto Extractor/Installer as the Firmware is the same for all OS's, just the way to install/update it was different... So I hooked the DVD drive to my PC and updated the firmware, checked it out on here before moving it back to the ibook, where I checked that it still worked and had the new update version showing, which it did, and now I have my fully working and newly updated drive ready for the OSX installations... I had attempted to update my Jaguar system as well while online, but it had no new updates available (I guess those were all mostly Tiger updates that were just recently released).
I am now off to install my additional RAM, and after checking that it all shows up correctly, I will go ahead and do the Panther Install (and test it out and see if I like it or not).
For anyone that currently uses Panther on any mac, are there still any major problems I should know about before hand, or know about things that they have mostly fixed (like the issues with Firewire ports and External Drives that they had around the time Panther was first released for example)???
Thanks to all that helped... I now know to attempt an "eject" of any external HD (which I do have one that I will setup to use after I get Panther on the ibook) or CD/DVD drive instead of just unplugging the USB/Firewire cable.

Hardware Upgrade Advice for HD editing and CS4

Dear friends,
I realize that there are many posts on hardware requirements, recommendations, etc... Perhaps this is my problem, there is too much info.
Here is my scenario and I would love some expert advice.
What I Have:
I have been editing my home movies since Premiere 6.5 and have been using CS3 for the past couple of years.
My current PC is an HP 9100t which has a ...
Quad Core 6600 2.4GHz processor
3GB RAM (max RAM is 8GB according to the stats for the motherboard)
500 GB System Drive
I recently added a 1.5 TB SATA Seagate Barracuda drive
Also have external 1TB WD connected via USB
Windows Vista Home Premium (32-Bit) OS
What I Just Got:
Recently purchased a Sony HDR-XR 500v and just love the HD picture quality. But now I want to edit the AVCHD files and thus upgrade to CS4
What I'd like to Know:
I'm tired of buying a new PC every couple of years, this machine is 16 months old and runs just fine.
Do you think I can upgrade the processor, add RAM and move to Windows 7 64-bit and happily edit my HD movies?
Or, do I need to once again try and convince my wife to let me buy a new PC
My Upgrade thoughts: I could Buy these items...
Intel Quad Core 9600 processor 2.8Ghz (the HP motherboard supports the Intel Yorkfield processors)
Max out the RAM at 8GB
Upgrade to Windows 7 Home Premium 64-Bit (I actually pre-ordered this for $49 a few weeks ago)
and of course upgrade to Premiere CS4
DO you think a few hundred dollars spent on upgrades will extend my editing life for another year or two?
Thanks so much!
Paul

but I was surprised to see you comment that it's pointless to upconvert video before working on it.
It can easily be you misunderstood my intention. It is somewhat like people often thinking that converting from a compressed format to a lossless format will restore the original quality. That is nonsense, because what has been thrown away during compression, can never be regained by uncompressing. That is an expectation similar to orange juice being uncompressed will restore the original oranges.
My intention with my remark was to emphasize that going from 4:2:0 to 4:2:2 will not restore original data or improve the image, only increase storage requirements.
But clearly that is not what you meant. You are talking about chroma keying and similar being best done on 4:2:2 or even better on 4:4:4 material. You are completely correct, but keep in mind, and that is what I tried to convey, is that starting out from 4:2:0 and upconverting to 4:2:2 or 4:4:4 will not restore original quality, it will still be (slightly less than) the 4:2:0 quality, because of the rounding errors in the algorithms. You will increase storage space significantly by this upconverting, but if you want to do any chroma keying, the quality of the keys will be significantly better than when performed on 4:2:0 material and the loss when again converting to 4:2:0 for final delivery will be significantly less than had you used chroma keys on 4:2:0 material.
I hope this explains it somewhat.

I can not delete my history and adding new bookmarks. Upgrading to later Firefox versions and/or re-installing didn't help. The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.

I can not delete my history and adding new bookmarks.
Upgrading to later Firefox versions and/or re-installing didn't rectify it either.
The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.
Also, I have noticed that every once in awhile you can not close tabs you've opened, either by pushing on the X button and/or clicking on the mouse to close it. Although closing the window and opening it again (without closing the Firefox application) seemed to rectify the problem in the short term, it's becoming quite annoying.
== This happened ==
Every time Firefox opened
== the Firefox is being used

I think I have a solution.
First, download the add-on SQManager. This should be included with FireFox, it is really good.
Look for the file '''moz_hosts''' in the folder '''places.sqlite'''.
Don't delete the file, just delete the information in the file. My file has over 3600 websites, which go back years!! I did not know they were there, but I was frustrated about not being able to get rid of them. They popped up every time I used the address bar. Clearing my history would not get rid of them.
This is where they are stored!! I found that by deleting the pesky web site from '''moz_hosts''', it does not appear in my address bar anymore!!!
I think that if I just delete all the websites in moz_hosts....
Wa-la...History Gone!!!
As long as you don't delete the file, just empty it, FireFox won't know the difference. It will just keep adding websites to it until you empty it again.
Why running "clear recent history" doesn't do this, I don't know. You are doing manually what "clear recent history" is not doing.
Please tell me if you see any flaw in this.
''I think it's the solution we've all been looking for!''

Problems with printing after upgrading to Win 8.1 and/ or explorer 11

I just upgraded to Win 8.1 and now some things I want to print are not formatted properly. I've updated the drivers and the print doctor doesn't find anything wrong. The issue I see is when trying to print a shipping label, the label components are overlapping. On another computer it is fine and prints fine. Help?

Hi FishingGuy58,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some printing issues since you upgraded to Windows 8.1. So I can better assist you, Please respond with the Printer Model number.
How Do I Find My Model Number?
Once I have the information I can better research the issue and with any luck, come up with a resolution to this issue.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

TS1538 I upgraded to Windows 8 Pro and now my ipod touch is not recognized in itunes

When I upgraded to Windows 8 Pro my ipod touch is no longer recognized in itunes. I tries reinstalling itunes with no luck. The device is registered id device manager as a camera?

It is normal and expected for the iPod to be seen as a camera as well as appear in iTunes.
For the iTunes problem try:
iOS: Device not recognized in iTunes for Windows
I would start by removing and reinstalling all the Apple software using:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

HP Pavilion DV6t-3100 CTO Entertainment Notebook PC - Upgrade hard drive to SSD and windows 8?

I want to upgrade my hard drive (WDC WD6400BEVT-60A0RT0) to SSD for faster performance AND upgrade to Windows 8. How should I proceed? Which should come first?
I am not very knowledgeable about these things, but I have changed hard drives before -- never an SSD though. Never had BIOS problems in these changes, so never bothered with it either. No experience about that. I am practically illiterate about that part.
What should I be careful about? Any SSD drive would work? Would BIOS (F.29) and motherboard (144A 65.38) be relevant? How should I choose my new SSD?
Do I absolutely need to clone C: drive? Could I not install windows 8 fresh/anew? What problems may I have with a new SSD?
In short -- what would be the best and least problematic way to do this?
I will back up my audio, video and office files. All copy-paste stuff. I have no problem with installing all my programs from scratch.
I couldn't find a specific thread that provides a comprehensive answer so I opened this thread.
Thanks.

It should be pretty simple _ remove the battery and adapter _ install your SSD _ hold down the power button for 1 full minute.
Eject the DVD tray with the manual eject hole using a bent out paper clip.
Load you W8 disc _ close the tray and plug in the adapter.
Boot up, it should just boot to the W8 disc, if it doesn't there will be a quick flash on the screen when to press the esc key, after that you choose f9 (with out checking) and tell the BIOS to boot from the CD/DVD ROM.
(the W8 disc will format the drive automatically)
Get the newest SSD you can find, don't buy old junk from eBay _ always buy from a reputable dealer.
I have Samsung SSD in my dv8 and has no problems, my old dv7 has an Intel SSD and it's been good too _ no problems. Stay away from bargain deals with obscure brand names.
There are no official drivers posted for your machine for W8, so you can/will have to use the generic ones, but some times the HP OEM W7 drivers will work.
Start with you Chipset driver first _ I think it's Intel _ there are no specs listed as your's is a CTO model.
Get the Chipset driver direct from Intel _ they may have updated their auto driver finder to scan in a W8 environment.
Install the rest of the drivers in any order. You can also use Windows update to find the drivers as well, it's up to you.
Be aware that some things may not work in W8, like you finger print reader.
The SSD will behave exactly the same as a standard drive, the only difference is that it will run faster.

I upgraded to iOS8.1.3, and now when I attempt to backup my iPad to iTunes for Windows, it keeps popping up an error message

H. I upgraded to iOS8.1.3, and now when I attempt to backup my iPad to iTunes for Windows, it keeps popping up an error message "not enough space on the computer". There is over 130Gb of space! I have updated iTunes, but no change. Is it an issue in the iOS update? Or am I doing something wrong?
Would appreciate your guidance...
<Subject Edited by Host>

When you upgraded, itunes should have put a copy of the itunes library database in a folder named *Previous iTunes Libraries* . If you upgraded itunes today it will show as
iTunes Library 2010-02-28.itl
Use these directions to get it back
http://support.apple.com/kb/TS1967
Since I am not sure of your setup, look for the "Previous" folder on both your C: and F: drives.

8.0 to 8.2 upgrade: ¿would it affect configuration and/or licensing?

Similar Messages

Maybe you are looking for