8.0.x client available for solaris?

My application server fails to connect to my (oracle 8.1.7 solaris 32 bit) database, producing an error which says it cant find libclntsh.so.1.0
It looks like version 8.1.7 client uses a shared lib called libclntsh.so.8.0 instead.
I created a symlink so libclntsh.so.1.0 pointed to the libclntsh.so.8.0 lib, but then got an error finding a symbol.
Where can i get the older client?
thanks
please email [email protected] with info!

Oracle Instant Client was a "feature" introduced with Oracle 10g. There is no 9i version.
Code that links with Oracle 9i libraries should be able to be linked with Instant Client 10gR2.
The resulting application will be able to connect to databases from Oracle 8.1 onwards.

Similar Messages

Will Instant Client 10.2.0.1 be available for Solaris 32-bit (SPARC)?

The latest Instant Client release is currently not available for Solaris Sparc 32-bit.
Does anyone know when it will be available?
Thank you.

It is available now.

Workshop (WebLogic 10.2 MP1) not available for Solaris 10 SPARC 64 bit?

Hi All,
When Workshop for WebLogic 10.2 MP1 will be available for Solaris 10 SPARC 64 bit.
I could find "WebLogic 10.2 MP1 for Solaris 10 SPARC 32 bit" but not for SPARC 64 bit!!
otherwise guide me to download page.
Thanks and Regards
Arunachalam.C
Edited by: arungoin on Feb 16, 2011 4:55 PM

I found by issue "mount -v" that our disk slices are
UFS type. So we don't need apply patch 5257399,
right? Please confirm. Thanks!!!For your information, you are asking the user community to confirm, not Oracle. Some (many?) of us are not employed by Oracle.
Therefore, the only answers you can get are from 'friends'. Nothing would be official and Oracle (and Oracle Support) would not be legally responsible.
Your safest bet would be to escalate the request wityh Oracle Support.

Oracle SOA Suite is also available for Solaris, HP-UX, IBM

Oracle SOA Suite is also available for Solaris, HP-UX, IBM
http://www.oracle.com/technology/software/products/ias/htdocs/101310.html

Hi-
You can use below manual installation proceeds as follows :
Step 1. Download a setup for Windows and run it on a Windows machine.
Step 2. Once the setup is finished, FTP all the following files and folders from your Windows machine to you Sun Solaris server :
the entire 'bin' folder (excepting the '.bat' files) - ASCII transfer mode
the entire 'lib' folder - BINARY transfer mode
the entire 'drivers' folder - BINARY transfer mode
Step 3. Once you have transferred all the files, do not forget to configure the odiparams.sh file according to your environment. Also add the appropriate files, used by ODI to connect to your technologies, to the 'drivers' folder.
Does it helpful?
Thanks,
Saravanan Rajavel

Is "SCSI Generic" driver available for Solaris 10?

I just wanted to know whether "SCSI Generic" driver is available for Solaris 10? And if yes then is it freely available?
weblinks for download would be very much helpful.
Thanks..

sgen is the driver that exports the uscsi api. I would presume that uscsi and sg would be similar, but annoyingly different. You can see the uscsi interface here: http://docs.sun.com/app/docs/doc/817-5430/6mksu57l0?l=en&a=view&q=uscsi
-r

Is Oracle client (v9.x.x.x or any) available for "Solaris 10 AMD64" ?

Is Oracle providing a client for "Solaris 10 AMD-64" ?
If so could you let me know the link to a trail/download s/w ?
Thanks in advance.
regards,
Srinivas Jaltaru

Hi Hans!
Thanks much.
Currently we are using Oracle database v9, so we are more interested on Oracle 9.x client to be run on "Solaris 10 AMD64".
I searched for the combination of "Oracle client 9.x"/"Solaris x86-64", and came to know this combination is missing(or unavailable) from the client list provided at Oracle web site.
Regards,
Srini J

When will 11.1.0.7 will be available for Solaris (SPARC) (32-bit)?

Hi
Does any of you know when 11.1.0.7 for "Solaris Operating System (SPARC) (32-bit)" will be available for download on http://www.oracle.com/technology/software/tech/oci/instantclient/index.html ?
The reason for my question is that 11.1.0.6 contains a bug (at least on Solaris) causing it to reserve approx 180M swap for each client started!
Regards
Mads

Just became available on http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/solsoft.html

When will 11gR2 be available for Solaris?

It's been three weeks since the release so I'm curious if anyone knows of a date for when 11gR2 for Solaris will be released?
Thanks!

Hans Forbrich wrote:
Solaris 8 is supported officially until March 2012
Solaris 9 is supported officially until October 2014
Oracle's policy has been to ensure all supported versions of an OS are treated the same at the time of an Oracle s/w release - if they are available, all features for an Oracle release will have been tested and, as far as feasible, will work the same with the exception of performance.
I admire Oracle's consistency.
I am saddened by people who seem to not accept that Oracle customers may be at a wide variety of supported versions of an OS and should be supported by Oracle product.You certainly have a respectable viewpoint.
I personally was (and am) most saddened at no 11g release at all on the Solaris x86_64 platform. I sometimes wonder if that was political reasons rather than technical or straightforward business decisions.
I generally think that for most Solaris customers moving to 11gR2 the business case would be overwhelming to move to Solaris 10 at the same time (exception might be a client only install). 11gR1 and lower are available to customers wishing to remain below Solaris 10.
What moving to solaris 10 would give is the ability to ensure concentration was made to intergrate well with the Solaris SMF facility rather than a dual SMF/legacy approach; and I'm not sure Oracle can really put in the resources to support both well.
I really dont think are in the upgrade catch-22 that used to occur (but I may be wrong here) .... for instance when Sun ultrasparcs needed Solaris 2.5/2.51 and that Oracle 7.1.4 was not supported on that release (7.1.4 was only supported to Solaris 2.4) . However 7.1.6.2 (which ws the terminal 7.1 release) would not run Oracle Forms 2.3 correctly for existing applications (it finally would (and would do so excellently) with a few patches but 7.1.6.2 had burnt a development DBA badly by that point, nd 7.3 was not an option as that was not compatible with forms 2.3). The upgrade plans for the E-Business Suite on a Sparc 1000 containing dev/test/prod on same Solaris 2.3 server were even more of a nightmare in that era.
Edited by: bigdelboy on 24-Sep-2009 00:40:
Having said that the main pain would probably be that some Solaris 8 / Solaris 9 servers out there may be tight for space on partitions containing root, /usr and /var and an upgrade to solaris 10 might require some shunting and shuffling. If overall server space is an issue then IMHO going to 11gR2 needs to be thought carefully anyway.
Hans - you've made me feel guilty :_| ... I :x all of Solaris 2.4/2.51/2.6/8/9/10u3+

Veritas Netbackup Client 6 for Solaris 10

Hi
Can anyone tell me where I can download Veritas Netbackup client for Solaris 10. We had the netbackup client for solaris 9 running but then we did a clean install of Solaris 10.
The netbackup server is running on an AIX server and I want to push the solaris client from there. We have separate license for all our clients running the netbackup agent but the netbackup server does not have the latest solaris 10 client. The AIX server do not have internet access, so I want to download the solaris 10 netback agent and put on the netbackup server.
Need to know the URL where I can download the netbackup agent for Solaris 10.
Many Thanks
Pioneer

Hi mcbrune1
I've check on the services in the client and all 4 services were up and running. Than I realized that this client was hardened a few weeks back. So I checked on the /etc/hosts.allow file and added an entry to allow the Master server to communicate using bpcd.
Now the Master server is able to see the client and everything seems to be working. Thanks for your help.
Cheers

Is ODI available for Solaris platform?

Hi,
I would like to know is there ODI available for Sun Solaris platform. I found in the installation document it says it is compatible with Sun Solaris. But I dont find any downloadbles available sun Solaris Platform.
In the Installation Document i found like
Minimum System Requirements:
This configuration is typically for 2 Oracle Data Profiling/Quality users and an overnight data
quality processing load.
�� 2 GB RAM
�� Disk space depends on the data processes, we recommend 1,5 GB plus 2 to 5 times the size
of the data sources.
�� Operating Systems:
UNIX:
�� AIX 5L (v5.1, 5.2, and 5.3)
�� Solaris 8, 9 or 10
�� HP-UX 11.i V1 (PA RISC), HP-UX 11.i V2 (IA64)
�� Linux Red Hat Enterprise Linux 2.1 and above
Windows:
�� Windows: Windows 2000 Server with SP 3
�� Windows Server 2003 Standard Edition with SP 1 (32 bit)ux Suse Version 9.2 Professional and above
so can I install ODI for unix in Solaris

Hi-
You can use below manual installation proceeds as follows :
Step 1. Download a setup for Windows and run it on a Windows machine.
Step 2. Once the setup is finished, FTP all the following files and folders from your Windows machine to you Sun Solaris server :
the entire 'bin' folder (excepting the '.bat' files) - ASCII transfer mode
the entire 'lib' folder - BINARY transfer mode
the entire 'drivers' folder - BINARY transfer mode
Step 3. Once you have transferred all the files, do not forget to configure the odiparams.sh file according to your environment. Also add the appropriate files, used by ODI to connect to your technologies, to the 'drivers' folder.
Does it helpful?
Thanks,
Saravanan Rajavel

DataSocket library available for Solaris 8

We are in the process of evaluating LabView and/or Labview/CVI for our application. One of the questions I have is whether a DataSocket library is available for use on a Solaris 8 platform so we can receive LabView data (via a DataSocket) there? If it is available, is there some sort of evaluation copy I can get ahold of to validate our concept??
Thanks
Jim Galbraith
Idaho National Engineering and Environmental Library
[email protected]

Jim,
The DataSocket(DS) library is available for use on a solaris 2.8 platform with the only limitation that the DS server is not available. You can request online evaluation versions for NI-Software at the following link:
http://sine.ni.com/apps/we/nioc.vp?pc=res&cid=1380〈=US&p_0=eval
Cyril
Cyril Bouton
Active LabVIEW Developper

7.7.07.30 not available for Solaris x86_64?

Build 7.7.07.30 is available for Linux x86_64 an Linux IA64 but not for other operating systems. Is there a reason for this?
Markus

Hi Markus,
no special reason for that apart from this: we had problems in tests on other platforms and this version was urgently requested especially on Linux and Windows where the tests were fine. So we decided to make this version available only on these platforms. The corrections/changes will be made available on all platforms with 7.7.07.32 which is currently in delivery.
Regards,
Steffen

Windows Client available for AccAD 2.3?

Hello,
we've downloaded the new AccAD version 2.3 today to begin trials. We noticed that the installation package for the windows client is corrrupt (only 31 bytes)? Is this a packaging error or is the Windows client missing for 2.3?
Best regards
Victor Viqueira Rodriguez

Hello,
unfortunately there is no such section
Comprised Software Component Versions
under the AccAD 2.3 tree so that I can download the client separately.
There is only a link to
Link to SP Stack Application
in which I end up in an error showing:
An unexpected error occurred while calculating the list of files for the SP Stack download. Please contact SAP Support for help in resolving this issue.
Start SP Stack: AAD 2.3 FOR SAP NETWEAVER - ISS Initial Shipment Stack
Target SP Stack : AAD 2.3 FOR SAP NETWEAVER - SPS 01 (10/2011)
Any suggestions
Thanks a lot and best regards
Victor

Bundle Patch1 is now available for Solaris (SPARC), Solaris (x86-64), AIX

[OTN |http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html?origref=http://www.oracle.com/technetwork/oem/grid-control/index.html] Hi All,
EM Binaries updated with bundle patch1 are now available on OTN
OMS and Management Agents for platform ::: Solaris (SPARC), Solaris (x86-64), and IBM AIX (64-bit)
Management Agents for platform::: HP-UX, or HP-UX Itanium
The BP1 workbook is updated with various use-cases specific to these platform. We strongly recommend you to follow the instruction from the workbook to apply BP1 patches. If you have any doubts feel free to drop me an email.
http://docs.oracle.com/cd/E24628_01/doc.121/e35229/toc.htm
Regards
Akanksha

Oracle Instant Client was a "feature" introduced with Oracle 10g. There is no 9i version.
Code that links with Oracle 9i libraries should be able to be linked with Instant Client 10gR2.
The resulting application will be able to connect to databases from Oracle 8.1 onwards.

Availability for Solaris Intel or MacOS X Intel?

if there is , how stable it is to run this software over a compatibility layer on top of these OSs ?

This is what you have available in OTN.
Oracle8i Enterprise Edition Downloads
Note: Oracle9i, Oracle's newest database, can be downloaded here.
Linux
Oracle8i Enterprise Edition Release 3 (8.1.7.0.1) for Linux (Intel), with OPS
Windows
Oracle8i Enterprise/Standard Edition Release 3 (8.1.7) for Windows 2000/NT
Solaris
Oracle8i Enterprise Edition Release 3 (8.1.7) for Sun SPARC Solaris (64 and 32 bit)
UNIX
Oracle8i Enterprise Edition Release 3 (8.1.7) for AIX-Based systems (64 and 32 bit)
Oracle8i Enterprise Edition (64-bit) Release 3 (8.1.7) for HP 9000 Series HP-UX
Oracle8i Enterprise Edition Release 3 (8.1.7) for Compaq Tru64 UNIX
http://otn.oracle.com/software/products/oracle8i/index.html
Joel Pérez

8.0.x client available for solaris?

Similar Messages

Maybe you are looking for