8.1.1 - spinning beach ball when I try to open

I SHOULD KNOW BETTER and wait until all the complaints have died down. I can't even open it! It's getting stuck while it's trying to access the apple store. How can I just go back to the older (non 8.1) version until they figure this out? I have no tunage.

Hi Linda,
Try quitting iTunes, removing any 3rd-party plug-ins or add-ons, and then relaunching iTunes.
Mac:
+/Users/username/Library/iTunes/iTunes Plug-ins+
+/Library/iTunes/iTunes Plug-ins+
from http://support.apple.com/kb/TA22611
An iTunes Plug-in that may be causing the issue is iConcertCal.
http://www.apple.com/downloads/macosx/ipod_itunes/iconcertcal.html
+"What’s New in this Version+
+- Fixed a bug introduced in the release of iTunes 8.1"+
-Jason

Similar Messages

Help with spinning beach ball when I try to open users/accounts in system prefs...I'm using Lion (which I hate) and I need to get into users to change my daughters forgotten password.

Opening system prefs is fine...when I click on users/accounts, the spinning ball appears and eventually system prefs just closes itself down.
I've also had a lot of ? Kernel panics....the grey see through screen slowly drops down, the multi language restart writing appears....I restart and it's just the same.
At the moment it feels like my mac is unusable...should I just uninstall lion and reinstall snow leopard?
So...system prefs help please and
Advice re whether or not to uninstall the annoying lion!
Thanks,
Nicki

Ok.....it makes no sense to me (no surprise there I bet).
The latest one looks like this....
Mon Aug 29 15:08:42 2011
panic(cpu 1 caller 0xffffff80002b3126): trying to interlock destroyed mutex (0xffffff80121d52c0)
Backtrace (CPU 1), Frame : Return Address
0xffffff808f46bd20 : 0xffffff8000220702
0xffffff808f46bda0 : 0xffffff80002b3126
0xffffff808f46bdb0 : 0xffffff7f818f12cc
0xffffff808f46bdd0 : 0xffffff7f818ef2db
0xffffff808f46be10 : 0xffffff800053a487
0xffffff808f46be50 : 0xffffff800057d5b2
0xffffff808f46bf10 : 0xffffff8000585ab8
0xffffff808f46bf60 : 0xffffff80005ca258
0xffffff808f46bfb0 : 0xffffff80002d7f59
      Kernel Extensions in backtrace:
         com.kaspersky.kext.klif(2.1d5)[458E888B-C722-9BC1-926C-4B96147C29FA]@0xffffff7f 818ed000->0xffffff7f81913fff
BSD process name corresponding to current thread: kav
Mac OS version:
11B26
Kernel version:
Darwin Kernel Version 11.1.0: Tue Jul 26 16:07:11 PDT 2011; root:xnu-1699.22.81~1/RELEASE_X86_64
Kernel UUID: D52AAB80-B2BC-3C6E-BBEA-78BD28064998
System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 121502919764
last loaded kext at 113385384312: com.kaspersky.kext.kimul.37    37 (addr 0xffffff7f8197d000, size 49152)
loaded kexts:
com.kaspersky.kext.kimul.37    37
com.Cycling74.driver.Soundflower    1.5.1
com.kaspersky.kext.klif    2.1.0d5
com.apple.driver.AppleBluetoothMultitouch    66.3
com.apple.driver.AppleHWSensor    1.9.4d0
com.apple.driver.AudioAUUC    1.59
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.driver.AppleUpstreamUserClient    3.5.9
com.apple.driver.AppleMikeyHIDDriver    122
com.apple.driver.AppleMCCSControl    1.0.24
com.apple.driver.AppleTyMCEDriver    1.0.2d2
com.apple.driver.AGPM    100.12.40
com.apple.driver.AppleMikeyDriver    2.1.1f12
com.apple.driver.AppleMuxControl    3.0.8
com.apple.GeForce    7.0.4
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.AppleHDA    2.1.1f12
com.apple.driver.AirPort.Atheros21    430.14.9
com.apple.driver.AppleLPC    1.5.1
com.apple.driver.AppleBacklight    170.1.9
com.apple.driver.AudioIPCDriver    1.2.0
com.apple.driver.AirPort.Atheros40    500.55.5
com.apple.driver.ACPI_SMC_PlatformPlugin    4.7.0b2
com.apple.filesystems.autofs    3.0
com.apple.driver.AppleUSBCardReader    3.0.0
com.apple.iokit.SCSITaskUserClient    3.0.0
com.apple.driver.AppleIRController    309
com.apple.BootCache    32
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.iokit.IOAHCIBlockStorage    2.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.driver.AppleFWOHCI    4.8.6
com.apple.driver.AppleUSBHub    4.4.0
com.apple.driver.AppleEFINVRAM    1.5.0
com.apple.driver.AppleAHCIPort    2.1.8
com.apple.nvenet    2.0.17
com.apple.driver.AppleUSBEHCI    4.4.0
com.apple.driver.AppleUSBOHCI    4.4.0
com.apple.driver.AppleRTC    1.4
com.apple.driver.AppleHPET    1.6
com.apple.driver.AppleACPIButtons    1.4
com.apple.driver.AppleSMBIOS    1.7
com.apple.driver.AppleACPIEC    1.4
com.apple.driver.AppleAPIC    1.5
com.apple.driver.AppleIntelCPUPowerManagementClient    166.0.0
com.apple.security.quarantine    1
com.apple.nke.applicationfirewall    3.0.30
com.apple.driver.AppleIntelCPUPowerManagement    166.0.0
com.apple.driver.AppleBluetoothHIDKeyboard    152.3
com.apple.driver.AppleHIDKeyboard    152.3
com.apple.driver.IOBluetoothHIDDriver    2.5f17
com.apple.driver.AppleMultitouchDriver    220.62
com.apple.iokit.IOBluetoothSerialManager    2.5f17
com.apple.iokit.IOSerialFamily    10.0.5
com.apple.iokit.IOSurface    80.0
com.apple.iokit.IOAVBFamily    1.0.0d22
com.apple.iokit.IOEthernetAVBController    1.0.0d5
com.apple.driver.AppleHDAHardwareConfigDriver    2.1.1f12
com.apple.driver.AppleGraphicsControl    3.0.8
com.apple.driver.DspFuncLib    2.1.1f12
com.apple.driver.AppleSMBusController    1.0.10d0
com.apple.driver.AppleBacklightExpert    1.0.3
com.apple.nvidia.nv50hal    7.0.4
com.apple.NVDAResman    7.0.4
com.apple.iokit.IONDRVSupport    2.3
com.apple.iokit.IOAudioFamily    1.8.3fc11
com.apple.kext.OSvKernDSPLib    1.3
com.apple.driver.AppleHDAController    2.1.1f12
com.apple.iokit.IOGraphicsFamily    2.3
com.apple.iokit.IOHDAFamily    2.1.1f12
com.apple.iokit.IO80211Family    400.40
com.apple.driver.AppleSMC    3.1.1d2
com.apple.driver.IOPlatformPluginFamily    4.7.0b2
com.apple.driver.AppleSMBusPCI    1.0.10d0
com.apple.iokit.IOFireWireIP    2.2.3
com.apple.kext.triggers    1.0
com.apple.driver.BroadcomUSBBluetoothHCIController    2.5f17
com.apple.driver.AppleUSBBluetoothHCIController    2.5f17
com.apple.iokit.IOBluetoothFamily    2.5f17
com.apple.driver.AppleFileSystemDriver    13
com.apple.iokit.IOUSBMassStorageClass    3.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.0.0
com.apple.iokit.IOBDStorageFamily    1.6
com.apple.iokit.IODVDStorageFamily    1.6
com.apple.iokit.IOCDStorageFamily    1.7
com.apple.iokit.IOUSBHIDDriver    4.4.0
com.apple.driver.XsanFilter    403
com.apple.driver.AppleUSBMergeNub    4.4.0
com.apple.driver.AppleUSBComposite    3.9.0
com.apple.iokit.IOAHCISerialATAPI    2.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.0.0
com.apple.iokit.IOFireWireFamily    4.4.3
com.apple.iokit.IOUSBUserClient    4.4.0
com.apple.iokit.IOAHCIFamily    2.0.6
com.apple.iokit.IONetworkingFamily    2.0
com.apple.iokit.IOUSBFamily    4.4.0
com.apple.driver.NVSMU    2.2.9
com.apple.driver.AppleEFIRuntime    1.5.0
com.apple.iokit.IOHIDFamily    1.7.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.TMSafetyNet    7
com.apple.security.sandbox    165
com.apple.kext.AppleMatch    1.0.0d1
com.apple.driver.DiskImages    326
com.apple.iokit.IOStorageFamily    1.7
com.apple.driver.AppleKeyStore    28.18
com.apple.driver.AppleACPIPlatform    1.4
com.apple.iokit.IOPCIFamily    2.6.5
com.apple.iokit.IOACPIFamily    1.4
Good luck!!!
Nicki

Why do I get the spinning beach ball when I try to change from Events to Photos. How do I fix it?

Why do I get the spinning beach ball when I try to change from Events to Photos. How do I fix it?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Spinning beach ball when changing length of midi region

I am get a spinning beach ball when trying to change the length (with mouse) of a midi region in the arrange window.
also when the beach ball stops spinning, the midi region hasn't changed its length at all.
Any ideas?
Thanks in advance
Marcel
G4 mirror door DP 1Ghz Mac OS X (10.3.9) Logic Pro 7 Kontakt 2

Do you have ProApps 3.1 installed?

Spinning Beach Ball when turning off Airport WiFi. SL Issues, many! Help!

I performed a clean installation of Snow Leopard on my new 13 inch late 2009 MBP on release date. All of a sudden, I am getting the infamous spinning beach ball when attempting to disable my Airport wifi. It's so bad, that I am not able to gracefully restart my system. Seriously this is getting out of hand. Snow Leopard was supposed to make Leopard even more stable.
Steps I have taken, not in any particular order.
Verified and repaired permissions.
Ran HW test, no issues found
Reset PRAM
Deleted wifi related plist files from /lib/prefs/sysconfig and rebooted;
The only thing I can think of next is to perform and Archive and Install or....
...As much as I would hate to go back, Install Leopard.
I would appreciate feedback or suggestions as what to do. Looks like 10.6.1 may be worth waiting for. Oh how I miss Tiger.

HI,
If you use an Airport Base Station or Airport Express, try resetting.
If that doesn't help...
Boot from the 10.6 disk and verify the startup disk for errors.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
Check available disk space.
Control or right click the MacintoshHD icon on your Desktop. Click "Get Info". Under the General tab you will see Capacity and Available. Make sure there is at least 10% available disk space, 15% is better.
If necessary, do an Archive an Install. It's the only install option available for Snow Leopard.
Carolyn

I get the spinning beach ball when I open preview, it wont go away, can i somehow stop the process its trying to do?

I get the spinning beach ball when I open preview, it wont go away, can i somehow stop the process its trying to do?

You can quit Preview by selecting it in Activity Monitor and then clicking on the red octagon 'Quit Process'. That does not solve the issue of the beach ball' as such. Perhaps. a reinstall of the OS might sole the problem. That is simply a guess on my part.
Ciao.

Spinning beach ball whenever I try to rebuild small thumbnails

I get the spinning beach ball whenever I try to rebuild iPhoto's small thumbnails. It gets about half way thru the process before hanging. Maybe there's a corrupt file?
I should just forget it (there is no real problem with the thumbnails, I just wanted to see if a rebuild would improve performance), but now it's bugging me.
Any suggestions are welcome and appreciated.
(this is actually on a friend's Intel iMac with Leopard and iLife '08)

melican
1. Back Up. Have you backed up? Are you Sure?
2. Download BatchMod from
http://macchampion.com/arbysoft/
And apply it to the iPhoto Library Folder using the settings found here:
http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
(Credit to Old Toad for this one).
Regards
TD

Spinny beach ball when i try to import an aiff file (6mins) into idvd 6.0.3

im reading the posts about audio encoding problems with idvd and
i get spinny beach ball when i try to import an aiff file (6mins) into idvd 6.0.3
right after i click the import button. wondering if this is a part of that problem. im not at the encoding phase. actually im trying to make the simplest dvd in the world. 1 picture and 1 song on the main menu-thats it. i have it set to "best quality" so it doesnt encode in the background-so says the idvd help menu. when i click import or drag the song file into the window (tried it many ways) i get infinite spinny beach ball. dont know if im waiting long enough before i force-quit, about 10 mins. didnt think this would be too hard for the machine to do considering im not burning yet, i just opened the program and this is the first thing i tried to do. any help??? i have a intel mini 1.66 with 2 gb ram, 10 gb free on hd, OS 10.4.9, and using a 23gb imovie file for the video. i didnt try plist deleting or reinstall yet because this is the only problem ive had. repaired permissions, checked the drive with disk utility. ran software update, nothing. nada. HELP!!!

i figured it out last night. idvd doesnt like .aiff's on my machine, maybe because its an intel. i converted it to apple lossless and it worked fine, it imported instantly. .mp3 and .m4a fine as well. i dont know why it wont import an .aiff, maybe because its an intel??? dont know. everyu time i try any aiff file on my machine, idvd does the spinny beachball forever. i even tried to reinstall idvd and that didnt work either, so i gave up and converted it to lossless.
to clarify, im just trying to make a simple dvd with my imovie footage, a main menu picture and 1 song to play on the main menu. i wanted to use the .aiff instead converting it to .mp3 because i didnt want to lose any quality. i guess apple lossless is good enough... whatever, just glad it works now. maybe ill be able to burn the dvd sometime this month, and im ready for the problems that will come when i try to do that. from what i hear i have to pack a lunch. everyone is saying ill have to mow my lawn by the time its done. that *** and not looking forward to that.

Spinning Beach Ball when trying to install CC

Help, help, help me pleeeeeze? I have job to do before the end of the weekend... I'm getting desperate!
I got the dmg file and tried to use the Creative Cloud Installer to start my free trial, but double clicking on the installer icon only produces a DLOG that says "Initializing Installer" with an empty progress bar and "Retry" and "Cancel" buttons. Neither of which is available, as the cursor turns into a spinning beach ball immediately, and nothing happens.
I have shut down and rebooted; repaired permissions and verified the hard drive. Nothing is working. Here is my system (yes, I know I barely meet the minimum requirements):
OSX Version 10.9.1
Hardware Overview:
Model Name:          MacBook
Model Identifier:          MacBook5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MB52.0088.B05
SMC Version (system):          1.38f5
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0866
Revision ID:          0x00b1
ROM Revision:          3384
Displays:
ACER X233H:
Resolution:          1920 x 1080 @ 60 Hz
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:
Main Display:          Yes
Mirror:          Off
Online:          Yes
Rotation:          Supported
Firewall Settings:
Mode:          Allow all incoming connections
Firewall Logging:          Yes
Stealth Mode:          No
Any ideas? Thanks for your input in advance.
Mandolynda
Message was edited by: Mandolynda

Unfortunately, the fix didn't stick. When the CC app told me it needed an update last night, I downloaded the update (because it wouldn't let me run AI unless I did), opened the .dmg file. It opened the DLOG (Initiating) and then wham: spinning beach ball forever. I have already tried:
Activity Monitor & canceled the task
Repaired permissions
Restarted computer
Re-downloaded the CC app
--no good, same outcome
so, I...
Canceled the task in the Activity Monitor
Plugged in the ethernet and turned off the WIFI (which is what fixed it, finally, the FIRST time this happened
Shut down and restarted the computer
Ran the Cleaner program [http://www.adobe.com/support/contact/cscleanertool.html] (uninstalled *every* Adobe program on my computer)
Re-downloaded the CC app and attempted install
--no good, same outcome
Frustrated out of my mind at that point, I shut off the computer and walked away. I don't know how the hell I'm ever going to get any work done! I'm sure not convinced I should buy a subscription at this point. I think I'll have to let my trial expire and just do all my free-lance work at my daytime job! Adobe won't be making any more money from me that way.

Spinning beach ball when quitting Logic and loading projects

Hello,
Whenever I load a Logic project I get the spinning beach ball. After a while, the project is loaded and it all works, but it is taken way too long to load the plugins. I'm not even talking about big projects, and I have an SSD, so it should be much faster.
The same happens when I quit Logic. Not when I close the project, but when I actually quit Logic. The "Logic Pro" menu in the top left corner of the menu bar in OS X would light up in dark blue when I press CMD + Q, and it would stay like this for 30 seconds or so. The spinning beach ball would appear again during this time. Then it would finally quit.
I have reinstalled OS X and reinstalled Logic Pro X. But the problem was still there. It sounds like a core audio problem, but the problem occurs no matter what my sound output is set to. It happened when the audio output was set to the built-in speakers of my Mac Pro (yes Mac Pro have that!), when it was set to the speakers of the Cinema Display (LED one) and when it was set to my RME Babyface.
I don't think it's a Driver problem because it happened as well when I reinstalled OS X and Logic, and when I tested it on the Macs/Cinema Displays speakers, without the RME Babyface, basically without having installed any drivers or anything yet. So everything was fresh and untouched.
This is a very weird issue. I'm wondering if someone knows what I could do next.
My specs:
Mid 2010 Mac Pro 12-core 2,92 GHz
32 GB RAM
27" LED Cinema Display
OS X 10.9.5 Mavericks
Logic Pro 10.1.1
Thanks a lot

Hi,
thanks for your reply.
Like I said, this is a complete fresh install – I installed OS X Mavericks 10.9.5 from a USB installer, and re-downloaded Logic Pro X from the App Store. That's all. That means there's no 3rd party plugins, no 3rd party drivers, nothing, just the stock OS X system.
However, I just installed the RME Babyface drivers. But this makes no difference, as the problem was present before as well. I'm just saying that, because it appears in my EtreCheck Report which I will post an the end of this message, so you may be wondering.
I tried to delete the preference files and such before – no change.
Logic started normally (= no message or appeared or anything) while holding down Shift + Control, and also while holding down the Option key. The issue is still there. What would or what should it do if I hold these keys while starting? When I hold only the Control key however, it asked me if I wanted to start Logic without the Core Audio. I clicked to start without it, and then obviously everything worked.
So here's my EtreCheck report. Everything looks normal I'd say?
EtreCheck version: 2.1.8 (121)
Report generated 09. April 2015 16:30:01 MESZ
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    Mac Pro (Mid 2010)
    Mac Pro - model: MacPro5,1
    2 2.93 GHz 6-Core Intel Xeon CPU: 12-core
    32 GB RAM Upgradeable
        DIMM 1
            16 GB DDR3 ECC 1333 MHz ok
        DIMM 2
            Empty
        DIMM 3
            Empty
        DIMM 4
            Empty
        DIMM 5
            16 GB DDR3 ECC 1333 MHz ok
        DIMM 6
            Empty
        DIMM 7
            Empty
        DIMM 8
            Empty
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en2: 802.11 a/b/g/n
Video Information: ℹ️
    AMD Radeon HD 7950 - VRAM: 3072 MB
        LED Cinema Display 2560 x 1440
System Software: ℹ️
    OS X 10.9.5 (13F34) - Time since boot: 4:52:33
Disk Information: ℹ️
    HL-DT-ST DVD-RW GH61N
    HL-DT-ST DVD-RW GH61N
    Samsung SSD 850 PRO 512GB disk0 : (512,11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh SSD (disk0s2) / : 511.25 GB (494.58 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    ST2000DM001-1ER164 disk1 : (2 TB)
        EFI (disk1s1) <not mounted> : 210 MB
        Macintosh HDD (disk1s2) /Volumes/Macintosh HDD : 2.00 TB (2.00 TB free)
USB Information: ℹ️
    General UDisk
    Apple, Inc. Keyboard Hub
        Logitech Apple Optical USB Mouse
        Apple Inc. Apple Keyboard
    Apple Inc. Apple LED Cinema Display
    Apple Inc. Display iSight
    Apple Inc. Display Audio
    RME Babyface (23483046)
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Extensions
    [loaded]    de.rme-audio.driver.RMEFirefaceUSB (2.05 - SDK 10.9) [Click for support]
Problem System Launch Agents: ℹ️
    [failed]    com.apple.uhfu.ledcinemadisplayaudio.plist
Launch Agents: ℹ️
    [running]    de.rme-audio.RMEfirefaceUSBAgent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 537 - SDK 10.9
    QuickTime Plugin: Version: 7.7.3
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         1%    WindowServer
         1%    Logic Pro X
         1%    coreaudiod
         1%    fontd
         1%    sysmond
Top Processes by Memory: ℹ️
    241 MB    Logic Pro X
    137 MB    mds_stores
    137 MB    Safari
    103 MB    com.apple.WebKit.WebContent
    103 MB    WindowServer
Virtual Memory Information: ℹ️
    29.92 GB    Free RAM
    2.07 GB    Active RAM
    573 MB    Inactive RAM
    1.77 GB    Wired RAM
    491 MB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Apr 9, 2015, 11:37:27 AM    Self test - passed
EDIT:
Okay, apparently there *is* a little problem. This part here:
Problem System Launch Agents: ℹ️
    [failed]    com.apple.uhfu.ledcinemadisplayaudio.plist
I believed this was normal because my audio output was set to the external USB audio interface when I ran the test, but I ran it again with the sound output set to the Cinema Display, and this message still appeared. When I click the Information symbol, it says:
These are low-level parts of your operating system, usually provided by Apple, that run in the background while a user is logged in. Any failure that appears here may indicate a problem with your system.
I can't tell if there's a link to my Logic problem, however.
PS: I just remembered that I installed a system update for the LED Cinema Display which I downloaded from the Apple Support page. Maybe it has to do with that. It may have been an old update that was not needed.

No more spinning beach ball when you click on get mail?

Hi
I just bought a new iMac.
I did not have M/L on my old machine. In the mail program in it (it had Lion) when you clicked on the Get Mail button, a beach ball would spin to let you know that it was looking for mail. There is no spinning beach ball in the M/L mail program. So, how do I know that it is working? Other then when an email shows up in the in box?
Thanks
rlmslo

OS X 10.8 Mountain Lion
Mail 6.2
The "spinning gear" activity indicator is no more available in Mountain Lion.
Apple removed it.
There is a "MAIL ACTIVITY" progress bar available in the left sidebar.
Best.

Spinning Beach Ball When Trying To Capture

Upon trying to capture, using a new camcorder (Canon HV20), in the small black window where the capturing footage would appear, it is black, and in the caption area below it says
"Waiting for timecode.
Device must be in VTR when device control is enabled.
Press Esc to abort."
I pressed Esc and got the spinning beach ball. It's been spinning for 5 minutes or so. What do I do? Thanks.

Please give FULL information of your entire system, OS version, QT version, FCE version, computer, drives, how everything's connected, settings on the media and settings used in FCE.

Spinning Beach Ball When Clicking Different Points on Timeline

I'm sure this is a basic one, but can't find answers anywhere. I'm using FCP 4.5 HD on a new G5. Never had this issue before, but it randomly slows down to the spinning beach ball and white X in the viewer Canvas when I click on various points in my timeline.
I have over a gig free of memory, and my Activity Monitor shows it's all FCP when it slows to the spinning ball...
I'm under deadline and this is very time consuming. Any suggestions out there?
THANKS.

First - please click the reply button on the actual post you're replying to. It's hard to guess the relevance of your answer when you keep replying to yourself.
Please confirm the following:
Easy Setup Setting :
Timeline Setting :
(Ctrl+Zero)
Codec :
(Right or Ctrl-Click a clip in the browser and report what the 'Compressor' line states)
Sorry if you know all this - it just saves time if you don't.
I think it's possible this could be a corrupted render file so I suggest you trash your render files :
Tools > Render Manager
After trashing, render again if you need to, and see whether there's an improvement.
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Got this Spinning Beach Ball when I swap app

this drives me nuts, and the fact that I do not understand why drives me even more nuts
when I am in FCPX everything works fine, it goes fast without lack, but if I shortly swap to another app and back, **** begins...
the Spinning Beach Ball spins like ****, and it takes about 50 seconds before it stops, and it do not matter what app it is, Preview, Safari or just the finder
I use a 8core 2,26GHz Macpro, ATI Radeon HD 5870 GPU, SSD HD with OS 10.7.2 and 32GM ram, the video is on a 14TB Raid, the same machine runs like a dream with FCP (and all other apps) and did ok with FCPX until the last couple of weeks, it feels like it need to read something over the network with to small bandwidth?
anyone?

Okay, this is a little strange.
Try the following:
Quit FCP X
Unmount drives
From your user library, drag the following preference files to your desktop:
User > Library > Preferences > com.apple.FinalCut.plist.
User > Library > Preferences > com.apple.FinalCut.LSShardFileList.plist.
Mount your drives
Launch FCPX. FCP X will recreate new preferences files
See how this goes. Maybe your pref files are corrupted.

Final cut Spinning Beach Ball when i press spacebar to playback the sequenc

Hello,
We have 5 machines with xsan, final cut and open directory. On one only machine, when i playback secuences appears the spinning beach ball for 5 seconds before playing. The When i restar that machine, the final cut playback correctly again, but if i'm working with Final for 1 hour or 2, this happens again. I uninstall the final cut and reinstall it, and this still happening.
does anybody any idea about it?
thank for your time.

Anything about that particular workstation that sets it apart form the others? Installed software, background processes, attached hardware/peripherals? Does the issue happen regardless of the account being used?
Have you run any diagnostics on that machine? All the basic system troubleshooting steps taken? Eg Repaired permissions, Rebuilt with Disk Warrior (commercial product).
Have you done the usual step of trashing FCP preferences on that machine? On that front, you might also want to check out Jon Chappell's excellent FCS Maintenance Pack ( http://www.digitalrebellion.com/fcs_maintenance.htm ) and FCS Maintenance Network Admin ( http://www.digitalrebellion.com/fcsm_netadmin.htm ).

8.1.1 - spinning beach ball when I try to open

Similar Messages

Maybe you are looking for