8.1.5.0.2 patch now OK!!

That linux_patches.tgz ( cumulative patch from 8.1.5.0.1 to 8.1.5.0.2 ) is now ok. That is, it is no longer corrupted and I was able to completely ungzip and untar the file.
I still have to see though if it fixes the "Load Indicator" problem, but the README file "seems "to indicate that it does fix it:
987647 - BOGUS OER IN PMON TRACE FILE
John Salvo
null

Hello !
I am installing Oracle8iEE(8.5.1) on Linux Red Hat 7.2. I
need the linux_815patches.tgz.
I have searched on oracle web site and the link is not
available
http://download.oracle.com/otn/other/misc/linux_815patch
es.tgz
And OTM says:
OTN does not have the download/documentation/patches available >on Linux
8.1.5.
Regards,
OTNCould you send me the patch?.(the file
linux_815patches.tgz)
My e-mail is [email protected]
Thanks a lot!
alvaro.
PD: I will thanks for any suggest!

Similar Messages

FYI - Uptime display is still broken in 10.2.0.3 - Patch Now Available

You may find that your uptime shows 1 min or some silly numbers. This bug was supposedly fixed but when I logged a tar they said that it indeed is still a problem. Fixed in 10.2.0.4. I am awaiting a backport for the corrections.

Patches are now available for 10.2.0.3. I used the deployment option within OEM to roll them out. There is also a patch to the OMS itself. They changed the display to say "Boot Time" on the host target screen.
Also, I found by looking at the patch set that the Boot Time is available in the repository (and hence can be used for reports and such).
select *
from mgmt_target_properties
where property_name = 'Boottime'

Important - 3.0.9.8.2 Patch Now Available on Metalink

Please note that the 3.0.9.8.2 patch is now available on
Metalink. This patch includes many of the one-off patches and
bug fixes previously released for release 3.0.9, including the
3.0.9.8.1 patch.
The patch number is 2104468. Installing this patch is highly
recommended. Please read the release notes carefully before
installing.
Regards,
Jerry

Dear Jerry
Could you please advise about How to Get the patch version for
NT Environment in the metalink site.
By searching for Patch number 2104468 , I am getting only the
version for HP-Unix and Solaris.
Regards

10.5.1 Patch - Now my MacBook won't restart

I downloaded the 10.5.1 patch this morning and now my MacBook is stuck in a restart loop.
The Apple logo is displayed with the rotating timer for several minutes, then the MacBook restarts again. I get the startup chime and back to the Apple logo screen for several minutes again!!
HELP!!!!

I'm having the same thing happen with my MacBook and 10.5.1. Not sure what the fix is.

Connexant drivers killed sound, downloaded patch, now what?[SOLVED]

I installed the conexant drivers for my modem and my sound stopped working. I knew this might happen. I went to www.linuxant.com/alsa-driver and downloaded a patch, and I don't know how to apply it.
Any help. This is probably simple.
Last edited by Raccoon1400 (2008-07-02 00:20:41)

Fixed. All I needed to do was re-add the volume control to the panel and unmute it.

Premiere 8.0.1 patch now available by direct download

http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4653&fileID=4342
Cheers,
Neale
Insanity is hereditary, you get it from your children

I DID GET A MEMORY ERROR: "THE INSTRUCTION AT '0x00b4Cacc' REFERENCED MEMORY AT '0x00000014'. THE MEMORY COULD NOT BE READ. ANY IDEAS??
This is often an indication that some program, or Process, has either incorrectly reported its memory (RAM, or Virtual Memory - Page File) usage to the OS, or that when it exited, it said that it had released the memory address, but really did not.
The first step that I would take would be the tips in this ARTICLE for first setting up my computer, and then getting it ready for an editing session.
Good luck, and hope that that helps,
Hunt

Errror while Running the ant file(build.xml) when applying B2B-BPEL patch

Hello all,
I am trying to apply the B2B WSIL Browser patch and while running the ant file i got the following warning while backing out d3l.jar file
echo Backing out dl3l.jar to avoid conflicts with B2B...
move *Warning: Could not find file C:\product\1013~1.1\ORACLE~1\bpel\samples\tmp\B2B-BPEL\${env.ORACLE_HOME}\xqs\lib\d3l.jar to copy.*
and the following error when it was not able to find admin_client.jar file
*java Unable to access jarfile C:\product\1013~1.1\ORACLE~1\bpel\samples\tmp\B2B-BPEL\${env.ORACLE_HOME}\j2ee\home\admin_client.jar*
java Java Result: 1
echo Binding B2B WSIL Browser...
*java Unable to access jarfile C:\product\1013~1.1\ORACLE~1\bpel\samples\tmp\B2B-BPEL\${env.ORACLE_HOME}\j2ee\home\admin_client.jar*
and the BUILD FAILED
*so i created the necessary folders in the newly generated folder manually in ${env.ORACLE_HOME} i.e xqs\lib & j2ee\home and pasted the d3l.jar and admin_client.jar in these folders respectively,and again ran the ant file,this time the error is first problem is cleared i.e it is not showing the warning that it could not find* d3l.jar_+ file and it is also converting this file as d3l.jar.hide_+ *, but this time in the place of second error a new error is generated i.e* +
Problem_
C:\product\1013~1.1\ORACLE~1\bpel\samples\tmp\B2B-BPEL>ant
Buildfile: build.xml
apply-b2b-bpel-10.1.3:
echo Prompting for B2B repository connection parameters...
input Please enter B2B repository hostname [http://127.0.0.1:] [http://127.0.0.1]
172.17.4.14
input Please enter B2B repository port 1521: 1521
1521
input Please enter B2B repository sid ORCL: ORCL
orcl
input Please enter B2B password b2b: b2b
b2b
input Please enter oc4j instance name home: home
home
input Please enter oc4j admin password welcome1: welcome1
welcome1
input Please enter opmn request port 6003: 6003
6003
echo Copying b2b.jar and tip.properties to appropriate locations...
copy Copying 1 file to C:\product\1013~1.1\ORACLE~1\bpel\samples\tmp\B2B-BPEL\${env.ORACLE_HOME}\lib
copy Copying 1 file to C:\product\1013~1.1\ORACLE~1\bpel\samples\tmp\B2B-BPEL\${env.OB_HOME}\system\classes
echo Backing out dl3l.jar to avoid conflicts with B2B...
move Moving 1 file to C:\product\1013~1.1\ORACLE~1\bpel\samples\tmp\B2B-BPEL\${env.ORACLE_HOME}\xqs\lib
echo Deploying B2B WSIL Browser ...
echo OPMN Port is : 6003
echo Container is : home
echo Host is : ${env.HOSTNAME}
echo iasadminpassword is : welcome1
java java.lang.NoClassDefFoundError: oracle/oc4j/admin/deploy/cmdline/Oc4jAdminCmdline
java Exception in thread "main"
java Java Result: 1
echo Binding B2B WSIL Browser...
java java.lang.NoClassDefFoundError: oracle/oc4j/admin/deploy/cmdline/Oc4jAdminCmdline
java Exception in thread "main"
BUILD FAILED
C:\product\1013~1.1\ORACLE~1\bpel\samples\tmp\B2B-BPEL\build.xml:88: The following error occurred while executing this line:
C:\product\1013~1.1\ORACLE~1\bpel\samples\tmp\B2B-BPEL\build.xml:49: Java returned: 1
Total time: 31 seconds
C:\product\1013~1.1\ORACLE~1\bpel\samples\tmp\B2B-BPEL>
i have set the classpath for the jdk and jre files correctly and also checked it with a sample program and the file is compiling and running with correct output.then why is it showing up java.lang.NoClassDefFoundError exception.Did anyone face the same problem or have a solution for this problem if they have then plzzz help me
thnx
Sunny
Edited by: sunny kay on Jan 27, 2009 4:14 AM

Hello sri,
Thanks for your response as you have told i have set the ORACLE_HOME = C:\product\10.1.3.1\OracleAS_1
and added C:\product\10.1.3.1\OracleAS_1\bin to my sys path
and i have also set the JAVA_HOME=C:\product\10.1.3.1\OracleAS_1\jdk
and added C:\product\10.1.3.1\OracleAS_1\jdk\bin to my sys path
and ran the patch,now its coming up with a different problem after entering the B2B repository connection parameters...
and it is
Problem_
echo Deploying B2B WSIL Browser ...
echo OPMN Port is : 6003
echo Container is : home
echo Host is : ${env.HOSTNAME}
echo iasadminpassword is : welcome1
java
java
java Failed at "Could not get DeploymentManager".
java
java This is typically the result of an invalid deployer URI format being
supplied, the target server not being in a started state or incorrect authentic
ation details being supplied.
java
java More information is available by enabling logging -- please see the
Oracle Containers for J2EE Configuration and Administration Guide for details.
java
java
java Java Result: 1
echo Binding B2B WSIL Browser...
java
java
java Failed at "Could not get DeploymentManager".
java
java This is typically the result of an invalid deployer URI format being
supplied, the target server not being in a started state or incorrect authentic
ation details being supplied.
java
java More information is available by enabling logging -- please see the
Oracle Containers for J2EE Configuration and Administration Guide for details.
java
java
BUILD FAILED
The Application Server is in the started state and these are the details that i have entered when B2B Repository Connection Parameters is prompeted
echo Prompting for B2B repository connection parameters...
input Please enter B2B repository hostname [http://127.0.0.1]: [http://127.0.0.1]
172.17.4.14
input Please enter B2B repository port [1521|http://forums.oracle.com/forums/]: [1521|http://forums.oracle.com/forums/]
1521
input Please enter B2B repository sid ORCL: ORCL
orcl
input Please enter B2B password [b2b|http://forums.oracle.com/forums/]: [b2b|http://forums.oracle.com/forums/]
b2b
input Please enter oc4j instance name home: home
home
input Please enter oc4j admin password [welcome1|http://forums.oracle.com/forums/]: [welcome1|http://forums.oracle.com/forums/]
welcome1
input Please enter opmn request port [6003|http://forums.oracle.com/forums/]: [6003|http://forums.oracle.com/forums/]
6003
is anything wrong in this i have tried by giving the default host name instead of mine but result is still the same.what is the problem can you figure it out and provide me a solution.
thnx
Sunny

Solaris 10 x86 jumpstart patch problem

I'm trying to jumpstart and deploy the patch using the profile file(classfile). I does work well on the sparc however I seem to have an issue with x86. The line in profile file looks like this
patch patch_order nfs server1:/patch/10_x86
patch patch_order nfs server1:/patch/10_x86/10_x86_Recommended
The same directory "patch" is shared for sparc and x86 and all directory have the same permission.
Every time I jumpstart, I get this error message
Installing patches now
ERROR: Could not mount server1:/patch/10_x86 for patch install
ERROR: Could not mount server1:/patch/10_x86/10_x86_Recommended for patch install

The problem was caused by the ipfilter behavior - ignorance of interface alias. My ipnat rule was:
map aggr150031:1 ...
I have changed into:
map aggr150031 ...
and the things began to work.
Sorry for the noise.

EP 6.0 SP2 Patch 27????

Hi,
just released in the service market place: patch 27 for EP 6.0 SP2. This is getting VERY confusing. See sapnote 774779 for details. The documentation they refer to is not yet available, but I would like to hear from SAP where this sudden re-numbering comes from! Are the portal patches now somehow related to the J2EE patch level?
Anyone?

Naming Convention
Enterprise Portal 6.0 SP2 patches now have an improved naming convention. From this version on, portal patches are to be aligned with those of J2EE 6.20 and of Knowledge Management & Collaboration. It is, therefore, recommend that when upgrading your system to J2EE patch level XY, you also upgrade the portal to Patch XY.
One-Time Closing of the Gap
For the upcoming release of EP 6.0, the patch is designated as Patch 27, despite the fact that the previous patch was Patch 5. This one-time step aligns the patch numbering of the portal with that of J2EE Engine. Portal will not have patches 6-26.
Alignment with J2EE in Future Releases
The availability of future portal patches will be coordinated with that of J2EE Engine. Patches are expected every 5 weeks.
Improvement: Accumulation
From now on, portal patches will be cumulative. Each future patch will include all the fixes provided with previous patches, going back to and including portal Patch 5. In other words, the current patch (27) includes the fixes provided with Patch 5, which was released a few weeks ago. Hence: - If your installation is currently up-to-date with Patch 4, you can directly install the latest patch. - If your installation is not yet updated up to Patch 4, you must install Patch 4 first, and then you can continue to the latest patch available. Make sure that you upgrade to Patch 4 according to the instructions in the guide Installing Patch 4 for EP 6.0 SP2 since Patch 4 and its preceding patches are not cumulative.
Aviad Rivlin is a QA Engeneer in the Portal Platform Organization. SAP Labs, Israel

7303033 Patch failed

Hi
we are upgrading our instacne from 12.0.6 to 12.1 and then 12.1.2
all steps to make Base Release for 12.1 is done sucessfully
when we apply patch 7303033 to upgrade 12.1 to 12.1.2 the patch error out
here showing the Autopatch logfile
************* Start of AutoPatch session *************
AutoPatch version: 12.0.0
AutoPatch started at: Sun Jun 06 2010 23:57:32
APPL_TOP is set to /oracle/PROD/apps/apps_st/appl
NLS_LANG value from the environment is : American_America.AR8MSWIN1256
NLS_LANG value for this AD utility run is : AMERICAN_AMERICA.AR8MSWIN1256
You can be notified by email if a failure occurs.
Do you wish to activate this feature [No] ? No
Please enter the batchsize [1000] : 1000
Please enter the name of the Oracle Applications System that this
APPL_TOP belongs to.
The Applications System name must be unique across all Oracle
Applications Systems at your site, must be from 1 to 30 characters
long, may only contain alphanumeric and underscore characters,
and must start with a letter.
Sample Applications System names are: "prod", "test", "demo" and
"Development_2".
Applications System Name [upg] : upg *
NOTE: If you do not currently have certain types of files installed
in this APPL_TOP, you may not be able to perform certain tasks.
Example 1: If you don't have files used for installing or upgrading
the database installed in this area, you cannot install or upgrade
the database from this APPL_TOP.
Example 2: If you don't have forms files installed in this area, you cannot
generate them or run them from this APPL_TOP.
Example 3: If you don't have concurrent program files installed in this area,
you cannot relink concurrent programs or generate reports from this APPL_TOP.
Do you currently have files used for installing or upgrading the database
installed in this APPL_TOP [YES] ? YES *
Do you currently have Java and HTML files for HTML-based functionality
installed in this APPL_TOP [YES] ? YES *
Do you currently have Oracle Applications forms files installed
in this APPL_TOP [YES] ? YES *
Do you currently have concurrent program files installed
in this APPL_TOP [YES] ? YES *
Please enter the name Oracle Applications will use to identify this APPL_TOP.
The APPL_TOP name you select must be unique within an Oracle Applications
System, must be from 1 to 30 characters long, may only contain
alphanumeric and underscore characters, and must start with a letter.
Sample APPL_TOP Names are: "prod_all", "demo3_forms2", and "forms1".
APPL_TOP Name [upgrade] : upgrade *
You are about to apply a patch to the installation of Oracle Applications
in your ORACLE database 'upg'
using ORACLE executables in '/oracle/PROD/apps/tech_st/10.1.2'.
Is this the correct database [Yes] ? Yes
AutoPatch needs the password for your 'SYSTEM' ORACLE schema
in order to determine your installation configuration.
Enter the password for your 'SYSTEM' ORACLE schema: *****
Connecting to SYSTEM......Connected successfully.
The ORACLE username specified below for Application Object Library
uniquely identifies your existing product group: APPLSYS
Enter the ORACLE password of Application Object Library [APPS] : *****
AutoPatch is verifying your username/password.
Connecting to APPLSYS......Connected successfully.
The status of various features in this run of AutoPatch is:
<-Feature version in->
Feature Active? APPLTOP Data model Flags
CHECKFILE Yes 1 1 Y N N Y N Y
PREREQ Yes 6 6 Y N N Y N Y
CONCURRENT_SESSIONS No 2 2 Y Y N Y Y N
PATCH_TIMING Yes 2 2 Y N N Y N Y
PATCH_HIST_IN_DB Yes 6 6 Y N N Y N Y
SCHEMA_SWAP Yes 1 1 Y N N Y Y Y
JAVA_WORKER Yes 1 1 Y N N Y N Y
CODELEVEL Yes 1 1 Y N N Y N Y
Connecting to SYSTEM......Connected successfully.
Connecting to APPLSYS......Connected successfully.
Identifier for the current session is 34811
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
AutoPatch warning:
Product Data File
/oracle/PROD/apps/apps_st/appl/admin/zfaprod.txt
does not exist for product "zfa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/oracle/PROD/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/oracle/PROD/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Reading database to see what industry is currently installed.
Reading FND_LANGUAGES to see what is currently installed.
Currently, the following languages are installed:
Code Language Status
US American English Base
AR Arabic Install
Reading language information from applAR.txt ...
Your base language will be AMERICAN.
Your other languages to install are: ARABIC
Setting up module information.
Reading database for information about the modules.
Saving module information.
Reading database for information about the products.
Connecting to SYSTEM......Connected successfully.
Connecting to APPLSYS......Connected successfully.
Connecting to SYSTEM......Connected successfully.
Reading database for information about how products depend on each other.
Connecting to APPLSYS......Connected successfully.
Reading topfile.txt ...
Saving product information.
Connecting to SYSTEM......Connected successfully.
Connecting to APPLSYS......Connected successfully.
AD code level : [B.2]
STRT_TASK: [AutoPatch startup after aimini] [] [Sun Jun 06 2010 23:57:47]
Connecting to APPS......Connected successfully.
STRT_TASK: [Validate schema passwords] [] [Sun Jun 06 2010 23:57:47]
Connecting to APPLSYS......Connected successfully.
Connecting to APPS......Connected successfully.
STOP_TASK: [Validate schema passwords] [] [Sun Jun 06 2010 23:57:47]
STRT_TASK: [Upload Patch History information from filesystem] [] [Sun Jun 06 2010 23:57:47]
Trying to obtain a lock...
About to attempt instantiating the current-view snapshot: Sun Jun 06 2010 23:57:47
Attempting to instantiate the current-view snapshot...
Was already instantiated. So no instantiation done this time.
Done attempting to instantiate the current-view snapshot: Sun Jun 06 2010 23:57:47
**************** S T A R T O F U P L O A D ****************
Start date: Sun Jun 06 2010 23:57:47
0 "left over" javaupdates.txt files uploaded to DB: Sun Jun 06 2010 23:57:47
0 patches uploaded from the ADPSV format patch history files: Sun Jun 06 2010 23:57:47
Uploading information about files copied during the previous runs ...
0 "left over" filescopied_<session_id>.txt files uploaded to DB: Sun Jun 06 2010 23:57:47
****************** E N D O F U P L O A D ******************
End date: Sun Jun 06 2010 23:57:47
STOP_TASK: [Upload Patch History information from filesystem] [] [Sun Jun 06 2010 23:57:47]
Enter the directory where your Oracle Applications patch has been unloaded
The default directory is [oracle/Upgrade_box/patches_12.1.2/7303033/7303033] : /oracle/Upgrade_box/patches_12.1.2/7303033/7303033
STOP_TASK: [AutoPatch startup after aimini] [] [Sun Jun 06 2010 23:57:50]
Please enter the name of your AutoPatch driver file : u7303033.drv
STRT_TASK: [Run a single patch driver file] [] [Sun Jun 06 2010 23:58:03]
STRT_TASK: [Steps before copy portion] [] [Sun Jun 06 2010 23:58:03]
STRT_TASK: [Initial driver processing steps] [] [Sun Jun 06 2010 23:58:03]
Start time for driver file is: Sun Jun 06 2010 23:58:03
STOP_TASK: [Initial driver processing steps] [] [Sun Jun 06 2010 23:58:03]
STRT_TASK: [Get Oracle Applications Release and read driver file] [] [Sun Jun 06 2010 23:58:03]
STRT_TASK: [Get Oracle Applications Release] [] [Sun Jun 06 2010 23:58:03]
Getting Oracle Applications Release...
Connecting to APPLSYS......Connected successfully.
Current installed release is 12.1.1
Connecting to APPS......Connected successfully.
STOP_TASK: [Get Oracle Applications Release] [] [Sun Jun 06 2010 23:58:03]
STRT_TASK: [Process patch driver file] [] [Sun Jun 06 2010 23:58:03]
Reading patch driver file...
Connecting to SYSTEM......Connected successfully.
STRT_TASK: [Parse and load patch driver file] [] [Sun Jun 06 2010 23:58:03]
Connecting to APPS......Connected successfully.
Parsing and loading patch driver file...
Processing line 10000.
Processing line 20000.
Processing line 30000.
Processing line 40000.
Processing line 50000.
Processing line 60000.
Processing line 70000.
Processing line 80000.
Processing line 90000.
Processing line 100000.
Processing line 110000.
Processing line 120000.
Processing line 130000.
Processing line 140000.
Processing line 150000.
Processing line 160000.
Processing line 170000.
Processing line 180000.
Processing line 190000.
199181 lines processed.
STOP_TASK: [Parse and load patch driver file] [] [Sun Jun 06 2010 23:58:07]
STRT_TASK: [Check patch integrity] [] [Sun Jun 06 2010 23:58:07]
Not checking patch integrity as integrity checking flag is turned off.
STOP_TASK: [Check patch integrity] [] [Sun Jun 06 2010 23:58:07]
Successfully read patch driver file.
STOP_TASK: [Process patch driver file] [] [Sun Jun 06 2010 23:58:07]
STRT_TASK: [Other driver and release-related logic] [] [Sun Jun 06 2010 23:58:07]
Determining target release...
Current target release is 12.1.1
STOP_TASK: [Other driver and release-related logic] [] [Sun Jun 06 2010 23:58:07]
STOP_TASK: [Get Oracle Applications Release and read driver file] [] [Sun Jun 06 2010 23:58:07]
STRT_TASK: [Prereq checking logic] [] [Sun Jun 06 2010 23:58:07]
Warning:
The description for the entity 'dna' in the patch driver
does not match with the current description.
The current description is :'Development'
The description in the patch is :'Product Workbench'
The current description will not be changed.
Warning:
The description for the entity 'iby' in the patch driver
does not match with the current description.
The current description is :'iPayment'
The description in the patch is :'Payments'
The current description will not be changed.
Warning:
The description for the entity 'izu' in the patch driver
does not match with the current description.
The current description is :'Support Diagnostic Tools'
The description in the patch is :'Oracle E-Business Suite Diagnostics'
The current description will not be changed.
For the Current View:
l_appl_top_id .............. 192
l_eav_patch_release_name ... 12.0.0
Current View - 7303033:US is NOT_APPLIED
STOP_TASK: [Prereq checking logic] [] [Sun Jun 06 2010 23:58:07]
STRT_TASK: [Ask translated patch question] [] [Sun Jun 06 2010 23:58:07]
This base patch contains files which may require translation
depending on the languages you currently have installed.
Oracle Corporation recommends that you obtain any translated versions of this
patch for each of your non-US languages PRIOR to applying this base patch.
The translated version of the patch should be applied immediately AFTER
applying this base patch.
Do you wish to apply this patch now [No] ? yes
STOP_TASK: [Ask translated patch question] [] [Sun Jun 06 2010 23:58:14]
STRT_TASK: [Determine bugs to apply] [] [Sun Jun 06 2010 23:58:14]
Determining which bug fixes to apply...
Turning off bug fixes for products not installed or shared in the database...
Resetting bug actions for bug fixes we will not apply...
Processing files for Oracle Government Applications...
Done determining which bug fixes to apply.
Log and Info File sync point:
Sun Jun 06 2010 23:58:14
Turning off actions that reference unrecognized products.
Log and Info File sync point:
Sun Jun 06 2010 23:58:15
End of unrecognized products checking.
STOP_TASK: [Determine bugs to apply] [] [Sun Jun 06 2010 23:58:15]
STRT_TASK: [Process action options] [] [Sun Jun 06 2010 23:58:15]
STOP_TASK: [Process action options] [] [Sun Jun 06 2010 23:58:15]
STRT_TASK: [Modify actions for bootstrap mode] [] [Sun Jun 06 2010 23:58:15]
STOP_TASK: [Modify actions for bootstrap mode] [] [Sun Jun 06 2010 23:58:15]
STRT_TASK: [Ask for number of parallel workers] [] [Sun Jun 06 2010 23:58:15]
Connecting to SYSTEM......Connected successfully.
Connecting to APPS......Connected successfully.
AD utilities can support a maximum of 999 workers. Your
current database configuration supports a maximum of 88 workers.
Oracle recommends that you use between 4 and 8 workers.
Enter the number of parallel workers [4] : 4
STOP_TASK: [Ask for number of parallel workers] [] [Sun Jun 06 2010 23:58:21]
AutoPatch will run in parallel mode.
STOP_TASK: [Steps before copy portion] [] [Sun Jun 06 2010 23:58:21]
STRT_TASK: [Copy portion steps] [] [Sun Jun 06 2010 23:58:21]
STRT_TASK: [apply new applterr.txt] [] [Sun Jun 06 2010 23:58:21]
Did not need to apply new applterr.txt.
STOP_TASK: [apply new applterr.txt] [] [Sun Jun 06 2010 23:58:21]
STRT_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Sun Jun 06 2010 23:58:21]
Applying new applprod.txt (if any)...
Did not need to apply new applprod.txt.
STOP_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Sun Jun 06 2010 23:58:27]
STRT_TASK: [Version checking for driver files] [] [Sun Jun 06 2010 23:58:27]
Performing version checking for driver files...
Log and Info File sync point:
Sun Jun 06 2010 23:58:33
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
STOP_TASK: [Version checking for driver files] [] [Sun Jun 06 2010 23:58:39]
STRT_TASK: [Copy driver files] [] [Sun Jun 06 2010 23:58:39]
Copying driver files into installation area...
You are running admvcode
Header information is:
$Header: aiopatch.lc 120.7 2007/12/03 08:27:09 nissubra ship $
Start of admvcode session
Date/Time is Sun Jun 06 2010 23:58:41
Filelist file is: /oracle/PROD/apps/apps_st/appl/admin/upg/out/copymast.txt
Patch Character Set is: us7ascii
On-site Character Set is: AR8MSWIN1256
Log and Info File sync point:
Sun Jun 06 2010 23:58:41
Information about files copied to the APPL_TOP would be written to the
informational message file.
Character set 'US7ASCII' is a subset of character set 'AR8MSWIN1256'.
No character set conversion is required.
Copying files to APPL_TOP...
0 directories created.
124 files copied without character set conversion.
0 files copied with successful character set conversion.
124 files copied successfully.
0 files had fatal errors.
admvcode is exiting with status 0
End of admvcode session
Date/time is Sun Jun 06 2010 23:58:49
Done copying driver files into installation area.
STOP_TASK: [Copy driver files] [] [Sun Jun 06 2010 23:58:50]
STRT_TASK: [Forcecopy driver files] [] [Sun Jun 06 2010 23:58:50]
ForceCopying driver files into installation area...
No driver files were selected for ForceCopying.
STOP_TASK: [Forcecopy driver files] [] [Sun Jun 06 2010 23:58:50]
STRT_TASK: [Screen out files not valid for this configuration] [] [Sun Jun 06 2010 23:58:50]
Screening out files not valid for this installation...
STOP_TASK: [Screen out files not valid for this configuration] [] [Sun Jun 06 2010 23:58:50]
STRT_TASK: [Read file driver files to get list of valid files] [] [Sun Jun 06 2010 23:58:50]
Determining valid on-site files...
Setting JAVA_TOP to '/oracle/PROD/apps/apps_st/comn/java/classes'
STOP_TASK: [Read file driver files to get list of valid files] [] [Sun Jun 06 2010 23:59:09]
STRT_TASK: [Perform libout actions] [] [Sun Jun 06 2010 23:59:09]
Extracting object modules from product libraries...
Done extracting object modules from product libraries.
STOP_TASK: [Perform libout actions] [] [Mon Jun 07 2010 00:00:10]
STRT_TASK: [Perform version checking] [] [Mon Jun 07 2010 00:00:10]
Performing version checking...
Log and Info File sync point:
Mon Jun 07 2010 00:00:12
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
No version in patch file:
/oracle/Upgrade_box/patches_12.1.2/7303033/7303033/msc/bin/setup_SNO.exe
Error occurred in version checking.
See above error messages or AutoPatch log file for details.
Exiting AutoPatch...
Freeing includes hash table
Freeing fixes hash table
Freeing basedons hash table
Freeing entities hash table
You should check the file
/oracle/PROD/apps/apps_st/appl/admin/upg/log/7303033.log
for errors.

Hi,
AutoPatch warning:
Product Data File
/oracle/PROD/apps/apps_st/appl/admin/zsaprod.txt
does not exist for product "zsa".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
AutoPatch warning:
Product Data File
/oracle/PROD/apps/apps_st/appl/admin/jtsprod.txt
does not exist for product "jts".
This product is registered in the database but the
above file does not exist in APPL_TOP. The product
will be ignored without error.
Those warning messages can be ignored -- See (Note: 421136.1 - Product Data File Error Applying Patch 4440000) for details.
For the other error, I believe the document provided by Helios should be helpful.
Thanks,
Hussein

Patch 10.1.2.2?

Does anyone know if you need to recompile all fmbs after applying the 10.1.2.2 patch?
Also, are all Developer Suite patches now going to be included with the App Server patches instead of as separate patches?

Hi Paul
The patch you are looking for has the number #4960210. And yes, all patches should be included, but of course you must test it.
So far, we havent had time to thoroughly test this patch in-house - so far it is only installed on a development server - but I haven't encountered any issues yet, which are in any way related to this patch.
And yes, I can strongly recommend to have your development environment and your application server to run the same patch level. That is our experience.
HTH,
Jacob

Kernel Patching with zones

I have a T2000 installed with the Solaris 10 1/06 release with several zones created on it. 4 zones are "sparse" root, and one (zone-5) is a "whole root" zone.
In order to apply and certify (internally) the latest sendmail patch, Solaris 10 needs a later kernel patch than I had installed (this is a subject for another discussion...). So I downloaded the latest patch cluster (4/6 Recommended cluster) to apply it.
I shut down the non-global zones, and took the machine to single user mode, and installed the cluster. It seemed to go in fine, except for the following error:
Zone zone-5
Rejected patches:
122856-01
Patches that passed the dependency check:
None.
Fatal failure occurred - impossible to install any patches.
zone-5: For patch 122856-01, required patch 118822-30 does not exist.
Fatal failure occurred - impossible to install any patches.Now, 118822-30 is a kernel patch series that is prerequisite for the latest kernel patch (118833-03). Zone-5 is my only whole-root zone. I then looked at the patch cluster log, and discovered that a handful of patches (including 118822-30) had also failed:
titan15n> grep failed /var/sadm/install_data/Solaris_10_Recommended_Patch_Cluster_log
Pkgadd failed. See /var/tmp/119254-19.log.6615 for details
Pkgadd failed. See /var/tmp/118712-09.log.9307 for details
Pkgadd failed. See /var/tmp/119578-18.log.15160 for details
Pkgadd failed. See /var/tmp/121308-03.log.18339 for details
Pkgadd failed. See /var/tmp/119689-07.log.22068 for details
Pkgadd failed. See /var/tmp/118822-30.log.9404 for details
Pkgadd failed. See /var/tmp/119059-11.log.29911 for details
Pkgadd failed. See /var/tmp/119596-03.log.4724 for details
Pkgadd failed. See /var/tmp/119985-02.log.8349 for details
Pkgadd failed. See /var/tmp/122032-02.log.13334 for details
Pkgadd failed. See /var/tmp/118918-14.log.27743 for detailsLooking at any of these logs (in the non-global zone-5's /var/tmp directory shows failures like the following snippet:
pkgadd: ERROR: unable to create unique temporary file </usr/platform/sun4us/include/sys/cheetahregs.h6HaG8w>: (30) Read-only file sy
stem
pkgadd: ERROR: unable to create unique temporary file </usr/platform/sun4us/include/sys/clock.h7HaG8w>: (30) Read-only file system
pkgadd: ERROR: unable to create unique temporary file </usr/platform/sun4us/include/sys/dvma.h8HaG8w>: (30) Read-only file systemQuestion(s):
Why would there be read-only file systems where tmp files are getting written? Possibly a timing issue?
Is there a "best practice" on applying patch clusters, and specifically, the kernel patch? Did I make a mistake in taking the zones down first? It seems like the zones were being booted up as the patches were getting applied, but I may be misinterpreting the output.
Even though the patches failed to apply to zone-5, the uname -a output in the zone show the latest kernel patch, but does NOT show 118822-30 (118822-25 is what showrev -p in the non-global zone-5 shows -- which is the level I was at before attempting to patch).
Any solutions?
Thanks.

The kernel config and patch are irrelevant - I have tried to compile the stock arch kernel just to make sure that it WASN'T the patch - I simple copied the folder from ABS, did makepkg and installed - no lucky. The problem seems to be that all of the kernels I compile end up with the folder in /lib/modules having -dirty on the end of them. How do I stop this '-dirty'?
I notice in the build I get this message -
==> Building the kernel
fatal: cannot describe '604d205b49b9a478cbda542c65bacb9e1fa4c840'
CHK include/linux/version.h

I have a question related to patch download using ftp which was working in

Hi,
I have a question related to patch download using ftp which was working in Classic Metalink.
ftp updates.oracle.com allowed to download patches before but now it says the following.
$ ftp updates.oracle.com
Connected to updates.oraclegha.com.
421-*********************** Downtime Notice ************************
421-
421-This service was retired as of November 06, 2009.
421-
421-****************************************************************
421
Is there a way to download patches now using command prompt. I couldn't see category for metalink in forums hence posted here.
Regards,
Nagendra Chillale

Enter the following command where username and password are your My Oracle Support login and password and filename is the patch file name that you copied from the Properties window::
wget http-user=username http-password=password no-check-certificate output-document=filename "http://updates.oracle.com/Orion/Download/download_patch/<filename>"
For example, to download patch 7154429 for Linux where the patch file name is p7154429_10204_Linux-x86.zip, enter:
wget http-user=[email protected] http-password=password no-check-certificate output-document=p7154429_10204_Linux-x86.zip "http://updates.oracle.com/Orion/Download/download_patch/p7154429_10204_Linux-x86.zip"
My Oracle Support FAQ ID 747242.5
Regards,
Nagendra Chillale
Edited by: user12023326 on Dec 16, 2009 11:43 AM

Is patching of CE 7.1 Ehp1 Preview version possible?

Currently I am evaluating the CE 7.1 Ehp1 Preview version. Unfortunately this version uses a Visual Composer version that is not compatible with IE8. Is it possible to patch the whole preview system to SP04? I already patched the Visual Composer parts of it (Base, Framework and Freestylekit) to SP04, but the Visual Composer still does not start because there is now a problem with the Portal Kit, which is not patched.
Patching the whole system should be a problem because some parts are only available for 64bit systems but maybe someone also tried to patch Visual Composer before? Or is it possible to patch only the CE parts without patching the database and kernel and so on?
Any input appreciated.
Thanks,
Mark

I tried to install the patch now but it is not working for me...
After running CEUPDATE.EXE I got the following error in the log:
INFO[E] 2010-01-25 08:26:15.829
FSL-02015 Node C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapmanifestceupdatemanager.mf does not exist.
ERROR 2010-01-25 08:26:15.860
FCO-00011 The step CE_UpdateContext with step key |CE_UpdateEXE|ind|ind|ind|ind|0|0|CE_UpdateManagementService|ind|ind|ind|ind|0|0|CE_UpdateContext was executed with status ERROR .
WARNING 2010-01-25 08:26:15.922
Could not get property IDs of the JavaScript object.
ERROR 2010-01-25 08:26:15.922
FJS-00010 Could not get value for property .

Where is Access Manager patch 4?

The release notes for Access Manager patches now includes a description of patch 4 (http://docs.sun.com/app/docs/doc/819-2134/6n4eoarc7?a=view) but I cannot find the patch on the support site. Does anyone know where the patch can be found and downloaded?
Thanks

You can find the page at the following location
http://sunsolve.sun.com/search/advsearch.do?collection=PATCH&type=collections&max=50&language=en&queryKey5=120956&toDocument=yes
++rudy

8.1.5.0.2 patch now OK!!

Similar Messages

Maybe you are looking for