8.1.7.0 to 8.1.7.5 caused numeric errors
Hi
Our front-end application runs on win95 station. Its datas are on an oracle database. In order for the stations to communicate with some instruments (scales, x-ray mineral analysis..) we had to put the oracle driver 8.1.7.5. Since then, we are experiencing trouble into some reports.
In the database, the value is "269.724", in the front-end aplication, the value is also "269.724". But when crystal reports gets the datas, is gets "269724.000". Both Crystal and the front end application uses the same ODBC to get the datas from the server.
What is very strange to me is that Crystal had the good values before the 8.1.7.5 update.
I tried the 8.1.7.6 update, didn't help. I re-created my ODBC connections, switched off the Ms Transaction server from the ODBC, said a prayer, but it is still wrong.
Do you have any suggestion, hint, tricks for me?
Nicolas Deault
Noranda Inc
[email protected]
Sorry about the previous message. The problem isn't related to Oracle ODBC driver.
(you may delete this thread)
Similar Messages
-
Hi all,
I would like to ask you for a help. I need to write a small program at my university. I started to write a midlet which function would be to countdown time for sports activities. I woul like to start a new thread - the one that counts down - and at the same time make the main thread sleep. After the "countdown" thread finishes, the main thread wakes up and waits for user input. The problem is that when the "countdown" thread finishes his work, I've got Uncaught exception java/lang/NullPointerException. error and the midlet halts.
Below you can find the code
import java.lang.*;
import java.util.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
public class intervals extends MIDlet implements CommandListener
public Display ekran;
private SweepCanvas sweeper;
private Form rundy;
private TextField round0, round1, round2, round3, round4, round5, round6, round7, round8;
private long czas,x;
private Command exitCommand;
private Command addRound;
private Command delRound;
private Command start;
private TextField repeat;
private Form odliczanie;
private Alert ostrz;
Licznik thread;
String test;
StringItem test1;
int parz,i,j,k;
static int l;
int ilrund;
int ilpowt;
Item sec;
long sec1;
public intervals()
rundy = new Form("Interwały sportowe");
exitCommand = new Command("Wyjście", Command.EXIT, 2);
addRound = new Command("Dodaj","Dodaj rundę", Command.ITEM,1);
delRound = new Command("Usuń","Usuń ostatnią rundę", Command.ITEM,1);
start = new Command("Start", Command.ITEM,1);
odliczanie = new Form("Odliczanie");
TextField dodaj(TextField kolej)
kolej=new TextField("Podaj czas (s) rundy "+parz,null, 4, TextField.NUMERIC);//stworzenie nowej instancji do wybierania czasu trwania rundy
if(rundy.size()==0)
rundy.insert(rundy.size(),kolej);
else
rundy.insert(rundy.size()-1, kolej);
return kolej;
void odliczanie(TextField round)
monitor m=new monitor();
k=Integer.parseInt(round.getString());
ekran.setCurrent(odliczanie);
thread=new Licznik(k,odliczanie);
thread.start();
ekran.setCurrent(rundy);
public void startApp()// throws MIDletStateChangeException
rundy.deleteAll();
repeat = new TextField("Podaj ilość powtórzeń",null,1,TextField.NUMERIC);
rundy.addCommand(addRound);
rundy.addCommand(exitCommand);
rundy.setCommandListener(this);
Canvas obrazek = new MyCanvas();
ekran = Display.getDisplay(this);
ekran.setCurrent(obrazek);
czas=System.currentTimeMillis();
while (System.currentTimeMillis()<czas+1000)
continue;
ekran.setCurrent(rundy);
public void pauseApp()
public void destroyApp(boolean unconditional)
notifyDestroyed();
public void commandAction(Command c, Displayable s)
if (c == exitCommand)
destroyApp(false);
notifyDestroyed();
else if(c==addRound)
if(rundy.size()==0)//Sprawdzenie ilości elementów w celu poprawnego wyświetlania liczby rund w formie
parz=1;
else
parz=rundy.size();
switch(parz)
case 1:
round0=dodaj(round0);break;
case 2:
round1=dodaj(round1);break;
case 3:
round2= dodaj(round2);break;
case 4:
round3=dodaj(round3);break;
case 5:
round4=dodaj(round4);break;
default:
ostrz=new Alert("Uwaga","Maksymalna liczba rund wynosi 9", null, AlertType.INFO);
ostrz.setTimeout(3000);
ekran.setCurrent(ostrz);
if(rundy.size()==1)
rundy.append(repeat);
rundy.addCommand(start);
rundy.addCommand(delRound);
else if(c==delRound)
if(rundy.size()!=0)
rundy.delete(rundy.size()-2);
if (rundy.size()==1)
rundy.deleteAll();
if(rundy.size()==0)
rundy.removeCommand(delRound);
rundy.removeCommand(start);
else if(c==start)
ilrund=rundy.size()-1;
if(this.repeat.size()>0)
ilpowt=Integer.parseInt(this.repeat.getString());
ekran = Display.getDisplay(this);
for (i=1; i<=ilpowt;i++)
odliczanie= new Form("Odliczanie");
for (j=0;j<ilrund;j++)
switch(j)
case 0:
odliczanie(round0);
break;
case 1:
odliczanie(round1);
break;
case 2:
odliczanie(round2);
break;
case 3:
odliczanie(round3);
break;
case 4:
odliczanie(round4);
break;
case 5:
odliczanie(round5);
break;
case 6:
odliczanie(round6);
break;
case 7:
odliczanie(round7);
break;
case 8:
odliczanie(round8);
break;
class Licznik extends Thread
int czas1,k;
Form forma;
monitor m;
public Licznik(int k,Form formap)
czas1=k;
forma=formap;
public synchronized void run()
while(czas1>0)
forma.deleteAll();
forma.append("Czas pozostały (s): "+czas1);
try{Thread.sleep(1000);} catch(InterruptedException e){e.printStackTrace();}
czas1--;
if(czas1<=0)
m.put();
}and monitor class
public class monitor
boolean busy=false;
synchronized void get()
if(!busy)
try
wait();
}catch(InterruptedException e){e.printStackTrace();}
notify();
synchronized void put()
if(busy)
try
wait();
}catch(InterruptedException e){e.printStackTrace();}
busy=true;
notify();
}Can anybody help me with this?Groovemaker,
Your Licznik class has a member m of type monitor, which has not been instantiated (in other words is null) hence, when calling m.put() you get NullPointerException. Please also mind, that using Thread.sleep(1000) is not an accurate way of measuring time.
If I may, please use recommended for Java class naming conventions - some of your names use lower case, while other don't which is confusing to the reader.
Daniel -
Problem with threads running javaw
Hi,
Having a problem with multi thread programming using client server sockets. The program works find when starting the the application in a console using java muti.java , but when using javaw multi.java the program doesnt die and have to kill it in the task manager. The program doesnt display any of my gui error messages either when the server disconnect the client. all works find in a console. any advice on this as I havent been able to understand why this is happening? any comment would be appreciated.
troy.troy,
Try and post a minimum code sample of your app which
does not work.
When using javaw, make sure you redirect the standard
error and standard output streams to file.
Graeme.Hi Graeme,
I dont understand what you mean by redirection to file? some of my code below.
The code works fine under a console, code is supposed to exit when the client (the other server )disconnects. the problem is that but the clientworker side of the code still works. which under console it doesnt.
public class Server{
ServerSocket aServerSocket;
Socket dianosticsSocket;
Socket nPortExpress;
ClientListener aClientListener;
LinkedList queue = new LinkedList();
int port = 0;
int clientPort = 0;
String clientName = null;
boolean serverAlive = true;
* Server constructor generates a server
* Socket and then starts a client threads.
* @param aPort socket port of local machine.
public Server(int aPort, String aClientName, int aClientPort){
port = aPort;
clientName = aClientName;
clientPort = aClientPort;
try{
// create a new thread
aServerSocket = new ServerSocket(port) ;
// connect to the nPortExpress
aClientListener = new ClientListener(InetAddress.getByName(clientName), clientPort, queue,this);
// aClientListener.setDaemon(true);
aClientListener.start();
// start a dianostic port
DiagnosticsServer aDiagnosticsServer = new DiagnosticsServer(port,queue,aClientListener);
// System.out.println("Server is running on port " + port + "...");
// System.out.println("Connect to nPort");
catch(Exception e)
// System.out.println("ERROR: Server port " + port + " not available");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Server port " + port + " not available", JOptionPane.ERROR_MESSAGE);
serverAlive = false;
System.exit(1);
while(serverAlive&&aClientListener.hostSocket.isConnected()){
try{
// connect the client
Socket aClient = aServerSocket.accept();
//System.out.println("open client connection");
//System.out.println("client local: "+ aClient.getLocalAddress().toString());
// System.out.println("client localport: "+ aClient.getLocalPort());
// System.out.println("client : "+ aClient.getInetAddress().toString());
// System.out.println("client port: "+ aClient.getLocalPort());
// make a new client thread
ClientWorker clientThread = new ClientWorker(aClient, queue, aClientListener, false);
// start thread
clientThread.start();
catch(Exception e)
//System.out.println("ERROR: Client connection failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client connection failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end constructor Server
void serverExit(){
JOptionPane.showMessageDialog(null, "Server ","ERROR: nPort Failure", JOptionPane.ERROR_MESSAGE);
System.exit(1);
}// end class Server
*** connect to another server
public class ClientListener extends Thread{
InetAddress hostName;
int hostPort;
Socket hostSocket;
BufferedReader in;
PrintWriter out;
boolean loggedIn;
LinkedList queue; // reference to Server queue
Server serverRef; // reference to main server
* ClientListener connects to the host server.
* @param aHostName is the name of the host eg server name or IP address.
* @param aHostPort is a port number of the host.
* @param aLoginName is the users login name.
public ClientListener(InetAddress aHostName, int aHostPort,LinkedList aQueue,Server aServer) // reference to Server queue)
hostName = aHostName;
hostPort = aHostPort;
queue = aQueue;
serverRef = aServer;
// connect to the server
try{
hostSocket = new Socket(hostName, hostPort);
catch(IOException e){
//System.out.println("ERROR: Connection Host Failed");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort Failed", JOptionPane.ERROR_MESSAGE);
System.exit(0);
} // end constructor ClientListener
** multi client connection server
ClientWorker(Socket aSocket,LinkedList aQueue, ClientListener aClientListener, boolean diagnostics){
queue = aQueue;
addToQueue(this);
client = aSocket;
clientRef = aClientListener;
aDiagnostic = diagnostics;
} // end constructor ClientWorker
* run method is the main loop of the server program
* in change of handle new client connection as well
* as handle all messages and errors.
public void run(){
boolean alive = true;
String aSubString = "";
in = null;
out = null;
loginName = "";
loggedIn = false;
while (alive && client.isConnected()&& clientRef.hostSocket.isConnected()){
try{
in = new BufferedReader(new InputStreamReader(client.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(client.getOutputStream()));
if(aDiagnostic){
out.println("WELCOME to diagnostics");
broadCastDia("Connect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
out.println("WELCOME to Troy's Server");
broadCastDia("Connect : client "+client.getInetAddress().toString());
out.flush();
String line;
while(((line = in.readLine())!= null)){
StringTokenizer aStringToken = new StringTokenizer(line, " ");
if(!aDiagnostic){
broadCastDia(line);
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
else{
if(line.equals("GETIPS"))
getIPs();
else{
clientRef.sendMessage(line); // send mesage out to netExpress
out.println(line);
out.flush();
} // end while
catch(Exception e){
// System.out.println("ERROR:Client Connection reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR:Client Connection reset", JOptionPane.ERROR_MESSAGE);
try{
if(aDiagnostic){
broadCastDia("Disconnect : diagnostics "+client.getInetAddress().toString());
out.flush();
else {
broadCastDia("Disconnect : client "+client.getInetAddress().toString());
out.flush();
// close the buffers and connection;
in.close();
out.close();
client.close();
// System.out.println("out");
// remove from list
removeThreadQueue(this);
alive = false;
catch(Exception e){
// System.out.println("ERROR: Client Connection reset failure");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Client Connection reset failure", JOptionPane.ERROR_MESSAGE);
}// end while
} // end method run
* method run - Generates io stream for communicating with the server and
* starts the client gui. Run also parses the input commands from the server.
public void run(){
boolean alive = true;
try{
// begin to life the gui
// aGuiClient = new ClientGui(hostName.getHostName(), hostPort, loginName, this);
// aGuiClient.show();
in = new BufferedReader(new InputStreamReader(hostSocket.getInputStream()));
out = new PrintWriter(new OutputStreamWriter(hostSocket.getOutputStream()));
while (alive && hostSocket.isConnected()){
String line;
while(((line = in.readLine())!= null)){
System.out.println(line);
broadCast(line);
} // end while
} // end while
catch(Exception e){
// System.out.println("ERRORa Connection to host reset");
JOptionPane.showMessageDialog(null, (e.toString()),"ERROR: Connection to nPort reset", JOptionPane.ERROR_MESSAGE);
try{
hostSocket.close();
}catch(Exception a){
JOptionPane.showMessageDialog(null, (a.toString()),"ERROR: Exception", JOptionPane.ERROR_MESSAGE);
alive = false;
System.exit(1);
} // end method run -
Problem with threads and simulation: please help
please help me figure this out..
i have something like this:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DrawShapes extends JApplet{
private JButton choices[];
private String names[]={"line", "square", "oval"};
private JPanel buttonPanel;
private DrawPanel drawingArea;
private int width=300, height=200;
public void init(){
drawingArea=new DrawPanel(width, height);
choices=new JButton[names.length];
buttonPanel=new JPanel();
buttonPanel.setLayout(new GridLayout(1, choices.length));
ButtonHandler handler=new ButtonHandler();
for(int i=0; i<choices.length; i++){
choices=new JButton(names[i]);
buttonPanel.add(choices[i]);
choices[i].addActionListener(handler);
Container c=getContentPane();
c.add(buttonPanel, BorderLayout.NORTH);
c.add(drawingArea, BorderLayout.CENTER);
}//end init
public void setWidth(int w){
width=(w>=0 ? w : 300);
public void setHeight(int h){
height=(h>=0 ? h : 200);
/*public static void main(String args[]){
int width, height;
if(args.length!=2){
height=200; width=300;
else{
width=Integer.parseInt(args[0]);
height=Integer.parseInt(args[1]);
JFrame appWindow=new JFrame("An applet running as an application");
appWindow.addWindowListener(
new WindowAdapter(){
public void windowClosing(WindowEvent e){
System.exit(0);
DrawShapes appObj=new DrawShapes();
appObj.setWidth(width);
appObj.setHeight(height);
appObj.init();
appObj.start();
appWindow.getContentPane().add(appObj);
appWindow.setSize(width, height);
appWindow.show();
}//end main*/
private class ButtonHandler implements ActionListener{
public void actionPerformed(ActionEvent e){
for(int i=0; i<choices.length; i++){
if(e.getSource()==choices[i]){
drawingArea.setCurrentChoice(i);
break;
}//end class DrawShapes
class DrawPanel extends JPanel{
private int currentChoice=-1;
private int width=100, height=100;
public DrawPanel(int w, int h){
width=(w>=0 ? w : 100);
height=(h>=0 ? h : 100);
public void paintComponent(Graphics g){
super.paintComponent(g);
switch(currentChoice){
case 0: g.drawLine(randomX(), randomY(), randomX(), randomY());
break;
case 1: g.drawRect(randomX(), randomY(), randomX(), randomY());
break;
case 2: g.drawOval(randomX(), randomY(), randomX(), randomY());
break;
public void setCurrentChoice(int c){
currentChoice=c;
repaint();
private int randomX(){
return (int) (Math.random()*width);
private int randomY(){
return (int) (Math.random()*height);
}//end class drawPanel
That one's from a book. I used that code to start with my applet. Mine calls different merthod from the switch cases. Say I have:
case 0: drawStart(g); break;
public void drawStart(Graphics g){
/* something here */
drawMain(g);
public void drawMain(graphics g){
g.drawString("test", x, y);
//here's where i'm trying to pause
//i've tried placing Thread.sleep between these lines
g.drawLine(x, y, a, b);
//Thread.sleep here
g.drawRect(x, y, 50, 70);
}I also need to put delays between method calls but I need to synchronize them. Am I doing it all wrong? The application pauses or sleeps but afterwards, it still drew everything all at once. Thanks a lot!It is. Sorry about that. Just answer any if you want to. I'd appreciate your help. Sorry again if it caused you anything or whatever. .n_n.
-
im using jdk 1.6 with java wtk 2.1
ya i know..
2.1 is a jdk1.4 source
but im using souce as 1.4 during compiliation so thats not the prob
this is my code
package org.learn;
import javax.microedition.midlet.MIDlet;
import javax.microedition.lcdui.Alert;
import javax.microedition.lcdui.Display;
public class thtest extends MIDlet
Thread t;
public void startApp()
Alert a=new Alert("hello");
a.setString("hello");
Alert b=new Alert("world");
b.setString("world");
Display d = Display.getDisplay(this );
d.setCurrent(a);
t=Thread.currentThread();
try{
t.sleep(10000);
catch (Exception e){}
d.setCurrent(b);
public void pauseApp()
public void destroyApp(boolean unconditional)
its just supposed to pause between the alerts using threads
however when i run it using the wtk, the emulator run properly but when i launch the app, it stops executing giving me this:
"Error verifying method org/learn/thtest startApp()V
Approximate bytecode offset 49: Inconsistent or missing stackmap at target
%the stack info%
Execution completed.
437782 bytecodes executed
9 thread switches
486 classes in the system (including system classes)
2506 dynamic objects allocated (73832 bytes)
2 garbage collections (60652 bytes collected)
Execution completed.
437782 bytecodes executed
9 thread switches
486 classes in the system (including system classes)
ALERT: java/lang/VerifyError: org/learn/thtest.
2506 dynamic objects allocated (73832 bytes)
2 garbage collections (60652 bytes collected)
please can someone help me out with this, is it an error on my part or do i have to set some option.Hi gandalf123,
First, Thread.sleep is a static method, so you don't need to create a Thread object to use it.
I think the problem is due to the fact you don't preverify your midlet.
More over, you don't need to double post your question. -
We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
=============================================================================================
"ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
at java.lang.String.substring(String.java:1446)
at java.lang.String.substring(String.java:1411)
at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
=============================================================================================
String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
=============================================================================================
----------------- lwp# 44 / thread# 44 --------------------
ff31f364 lwp_mutex_lock (e3d70)
fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
0) + 78
fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
fee6575c _start (5941d0, fa1a1600, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
From the thread dump:
"VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
From the first pstack:
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Second pstack
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there. Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this.
We're using the following memory options:
-ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
-verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
Thanks!
--Andy -
New DVR Issues (First Run, Channel Switching, etc.)
I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half. -
It has no response when I try to login database. I cancel the login since I don't have any choices
SQL> connect apps/apps
^CERROR:
ORA-00604: error occurred at recursive SQL level 1
ORA-01013: user requested cancel of current operation
But it is ok if I login as dba role like"/ as sysdba"
Please advice,
AmyWhen did it last work for application users?
What changed?
Identify the faulty trigger & either fix or DROP it.
SQL> desc dba_objects
Name Null? Type
OWNER VARCHAR2(30)
OBJECT_NAME VARCHAR2(128)
SUBOBJECT_NAME VARCHAR2(30)
OBJECT_ID NUMBER
DATA_OBJECT_ID NUMBER
OBJECT_TYPE VARCHAR2(19)
CREATED DATE
LAST_DDL_TIME DATE
TIMESTAMP VARCHAR2(19)
STATUS VARCHAR2(7)
TEMPORARY VARCHAR2(1)
GENERATED VARCHAR2(1)
SECONDARY VARCHAR2(1)SELECT .... WHERE OBJECT_TYPE = 'TRIGGER' .... -
My phone wont let me download apps
I tried updating apps on my iphone. When I click update all it acts like it's going to download. Then it tells me there's an error. I put in my billing information but it still won't download them. I don't know what to do.
What is the error?
-
Have had no luck with PCs trying to do music recoding so I swithced over to Mac because I heard it so easy, seamless, and problem free. Now, on opening Garageband for the first time and trying to preview loops I get an error mesage that says: "the software instrument or apple loop selected is currently being installed. You have already initiated the installation of additional content for Garageband via Software update. For additional information please open the software update application." I have opened this application and nothing. I have now spent about two hours trying to fix this problem. Should I "convert back to PC, take this load of crap back to the store or is there something simple I am missing?
I have found if you wait long enough, you will hear the file begin to play. Sometimes the delay can several seconds. Not acceptable IMO.
-
Three movies I bought from iTunes this morning do not show up on the 1st Gen AppleTV.
I understand some file formats are not compatible with AppleTV (1st gen) but these films were purchased directly from iTunes. One would assume they are formatted properly to work on Apple equipment, yes? Previously purchased movies show up on the AppleTV just fine, so I'm not sure what's going with these three. They were from the $4.99 Sci Fi collection: Enemy Mine, Dune and Terminator 2. Oldies but goodies. The iMac, where the iTunes Library lives is used to stream the content to the AppleTV, and everything that is in my Library appears to be available for streaming, except these three films. Any advice?
I have now restored Factory Settings on the Apple TV. Looked promising until iTunes hangs everytime I tried to enter the podcast page of the sync options. And I get errors that my newest movies, created in Final Cut Pro X with the Share with 720p Apple Devices export settings are not compatible with Apple TV.
Unbelievable. -
Hello,
When I sync music or podcasts onto my ipod nano (4th generation 16 GB) from my powerbook (OS X 10.4.11) using itunes (9.0.2) it appears, on the summary page of itunes, to be downloading into the correct blue audio folder however once the ipod is ejected no music or podcasts can be found. Once reconnected and on the summary page of itunes, the downloaded files appear to be in the incorrect orange 'other' file.
I have reset and restored the ipod several times. I tried to run disk utilities and got the following message: "Repairing disk failed with error Could not unmount disk"
Can anyone help me? Please?A simple solution found after many many hours of painstaking troubleshooting:
the problem seemed to be with itunes
trash itunes from the application folder
re-download itunes from apple website
restore ipod in itunes menu
after doing the above I was able to successfully download music again! Previous attempts to restore the ipod failed to solve the problem probably because of an issue with my itunes software.
I hope this saves other people all the time that I lost in the process! -
Tecra M9-136 - BSOD during Vista SP2 update
Tecra M9-136 asked this morning to update to Vista SP2 and during the process the BSOD 0x0000007E arrived. Restarted in Safe Mode and the installer continued and then finally reported that the update had failed - and reverted to SP1. This took most of the morning.
It will start in Safe Mode but on a normal boot-up, Vista SP1 gets through the fingerprint recognition and then fails with the same BSOD (it doesn't get as far as displaying the desktop).
The laptop has BIOS level 1.80. I've tried in Safe mode to install 1.90 but it tells me that the battery has insufficient charge and the power adapter isn't attached. Both untrue.
Stuck - need advice. Could this be a hard fault? Can't see how I can update anything if it's a soft fault.
thanksThe message with the BSOD mentioned checking BIOS and driver versions. Anyway, no change made to that.,
I tried System Restore but the only available restore point was the SP2 installation. I thought Vista was supposed to save a restore point every 24 hours even if nothing new had been installed.
I've now found in System Information / Windows Error Reporting several messages like this:
28/09/2009 12:08 Windows Error Reporting Fault bucket 0x7E_NULL_IP_DRVNDDM+57bd, type 0
Event Name: BlueScreen
Response: None
Cab Id: 0

Problem signature:
P1: 
P2: 
P3: 
P4: 
P5: 
P6: 
P7: 
P8: 
P9: 
P10: 

Attached files:
C:\Windows\Minidump\Mini0928 09-04.dmp
C:\Users\me\AppData\Local\Te mp\WER-75660-0.sysdata.xml
C:\Users\me\AppData\L ocal\Temp\WER7D78.tmp.version.txt
& #x000d;
These files may be available here:
C:\Users\me\AppData\Local\Mic rosoft\Windows\WER\ReportArchive\Report06d1c4b5 -
Does SAP maintain log of all the messages displayed on screen using MESSAGE statement?
We are investigating a problem and want to see the messages displayed by SAP during the time when problem occured.We have custom development for picking and confirmation. Last week we found that in some deliveries there is difference in delivered quantity and packed quantity.
Custom development is calling sap-standard FMs. Problem occurs randomly, roughly 10 deliveries in a week has this problem.
We are still trying to investigate the reason that is causing the problem.
Custom program does display the message to user if FM raise any message. We asked user of they are getting any message while picking, and if they are ignoring it.
They just confirmed that they are getting message 'Packing Not Possible Since there is no Quantity to be Packed' and they did ignored this. -
Hey guys wondering where i have been the last couple of days??...no, you guessed wrong i was not with my girlfriend (well at least no during daytime :D )
I was trying to LOGIN IN THE F*****G FORUM :O ?(
Markoul
p.s. At least it seems now we are going to have Avatars and also we have got the old forum back :PHi,
First of all thanks to all for the help, and CJLittle...LMAO ! My car is a Scooby and a nice blue paint job ! Believe it or not they assured me all this would work.. I bought it in one package and even questioned it. Also to be fair up until then they had always been very good... shows they have no zero about 3200XP 200 fsbetc... When I went back with the power supply and told them they changed it out and let me off on the extra money it should have been.
The crashes are as follows :-
[list=1]
Locks up after random amounts of time in games, sometimes dont even get to load it up at all, other times I can play 2 hours. When the games lock up usually there is a high pitch squeal and can only get out of it by reset or power off.
I cannot install Zone Alarm Pro or Agnitum Outpost are 2 anyway (there are others) these just come up with the installer screen and hangs there, I have to go to Task Manager to close them down, unlike the lock up in games.
The cooler is the Coolermaster Jet... and the temperature is more than acceptable (right now is 44 C) so I cannot see that at all being a factor.
leds are on on the d bracket when it locks, I did not know of this function and will check it out. Thanks for that tip.[/list=1]
Question from me: would the 2700 RAM cause these lockups ? I would have thought it would just not work at all ? If this is possible then I will go and change out the RAM as tuning it down to 166 (if it is possible) does not appeal to me ! But yes it may show what the problem is.
Thanks again, will see what happens... -
Can not refresh view data in STRUST
I am using the JSP (STRUTS) for developing my App.
I get a list of contact. In bellow it, I make a link for each contacts.
When i view details of one contact. On click link below.
My pages:
listcontact.jsp
contactdetails.jsp
When i request a details of contact from list contact -> View successfull.
But when i refresh the contactdetails.jsp page. I got a message error:
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.7 logs.
I have to use:
response.setHeader("Cache-Control","no-store");
response.setHeader("Pragma","no-cache");
But can't refresh any way this page.
Plase show me the way to solve it.
Thanks
Vu Nguyenhi,
Here are codes
listdata = new CompanyListData();
companyList = (ArrayList) session.getAttribute("datalist_company");
if (companyList == null)
companyList = (ArrayList) listdata.getCompanyList(datasource);
session.setAttribute("total", companyList.size()+ " companies");
session.setAttribute("datalist_company", companyList);
return (mapping.findForward("success"));
And for details:
if ((addressItem==null && companyName!=null)||(addressItem==null&& companyId!="0"))
addressData = new AddressDetailData();
addressItem = addressData.getAddressItem(datasource, companyId);
session.setAttribute("addressDetail", addressItem);
I got companyID by:
String companyId = request.getParameter("companyId");
return (mapping.findForward("success"));
Please gest the problems that.
Thanks,
Maybe you are looking for
-
Transfer with clearing (F-51) w/o Vat amount.
Hi, I need to transfer with clearing (Tcode F-51) an open vendor item which has an amount of VAT (Gross amount 1210: vendor amount 1000, VAT amount 210). The open item was posted with special G/L indicator (down payment), tax code, amount:1000 and va
-
Flashing pixels below menu bar?
After I updated to Mavericks I noticed that a strip of pixels will randomly flash at times right under the menu bar. The line is maybe 1/4 of the screen in the center. If I go into mission control or launch pad it goes away for a while but comes back
-
Where we can assign the form J_1IEWT_CERT and program
where we can assign the form J_1IEWT_CERT and program which we customized for the standard program J_1IEWT_CERT (name same as the form name ) . Can anybody please tell me I did the customization for both the form and the program now where I can assig
-
Customization of code inspector
in a inspecting program in ABAP: Avoid "SELECT * or SELECT SINGLE *" All the queries SELECT * and SELECT SINGLE * queries should be output. A new message should be created for each query. It must be possible to restrict the search in the version to
-
I am being told that "Back to Mac" isn't working because NAT Port Mapping is turned off on my router. What does that mean and how do I fix it?