8.1.7 install on RH7.1 : Java needed during the installation steps ?
Hi all,
I have a RH7.1 box, and I have the Oracle 8i official package for Linux (Oracle's CD named "Oracle 8i Entreprise Edition Release 3 (8.1.7) for Linux Intel").
I've read all the stuff about the glibc compatibility and took all appropriate actions. The "runInstaller" starts without any problem and I can go through the first installation stages.
But at time, I'm asked for a Java path (default : /usr/local/java) ! What's that ? Isn't Oracle supposed to install a JRE1.1.8 (available onto the CD) ? I've read all the software requirements and absolutely NOWHERE it is said that a Java has to be installed prior to the Oracle installation.
The CD comes with its own JRE1.1.8 so that the java runInstaller can start...(and indeed it starts without any prior JDK installation on my machine)
So what should I put as a path when asked for the Java path ? 'cause if I press ok, later an error message appears and says (of course) "No java found in /usr/local/java..."
I'm blocked during this installation stage...
Any help would be greatly appreciated.
Thanks,
Arnaud.
Hi Denis,
Thanks for your input. What I did (prior to reading this post again) is that I installed a jdk-1.3.1 (as an rpm) and I did a symbolic link like you explained.
It works fine, now I have a fully operationnal 8i database on my RH7.1 box
Anyway, my question remains the same : why isn't it specified in the installation software requirements that a java environment has to be installed PRIOR to the 8.1.7 installation.
This installation guide is really poorly designed. It does'nt even say which version of Linux it officially supports.
Moreover, isn't linux jre 1.1.8 supposedly bundled into the CD ? Isn't it installed during the 8i installation ? The answer is yes... after the installation, I have a JRE1.1.8 on top of the ORACLE_HOME directory.
What I think is that all this is really stupid and poorly designed and badly documented.
Anyway, finally, it works... but it is not officialy supported (RedHat 7.1) sight
Thanks for your help,
Regards,
Arnaud
Similar Messages
-
I just run the Flashback malware removal tool, and then nothing happens. Will it be a problem? and if I have java installed and I disabled it during the installation, will my status as my machine has not java installed? thanks.
Will it be a problem?
No.
...if I have java installed and I disabled it during the installation, will my status as my machine has not java installed?
Java is still installed. -
Jave error during the installation of Oracle cleint
I am trying to install Oracle 11g 64-bit client on my computer which is Window 7 64-bit. I am stucking at the step of Perform Prerequisite Checks. The installer was hanging forever. I froced to kill the installer from task manger. Then I got the error says Java (JM) 2 standard edition binary is not responding. I checked I have latest Java installed. And I also cleared the java cache. However, nothing makes it work. Can you please help?
Thanks,
BingRBYL wrote:
I am trying to install Oracle 11g 64-bit client on my computer which is Window 7 64-bit. I am stucking at the step of Perform Prerequisite Checks. The installer was hanging forever. I froced to kill the installer from task manger. Then I got the error says Java (JM) 2 standard edition binary is not responding. I checked I have latest Java installed. And I also cleared the java cache. However, nothing makes it work. Can you please help?
Thanks,
BingNo Oracle software is ever certified on any Windows Home Edition.
consider to actually Read The Fine Manual; Installation Guide
http://www.oracle.com/pls/db112/portal.portal_db?selected=11&frame= -
windows 7...
please help; step by step?These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
hi,
I installed visual studio 2010 in my windows 8.1 system.during the installation sql server 2008 r2 features were installed.so which version of sql server i need to install(2008 or 2008 r2)?
regards,
harsha.My guess is SQL Server 2008 R2.
Check the following KB article for details:
http://support.microsoft.com/kb/2681562
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
operating system os x 10.6.8 safari 5.1.10. am told on checking that 16.0.305 is installed but not in application. have downloaded install app but cannot carry out the installation. can anyone help? am unable to use any application requiring flash player.
thank you!Hi Anne,
Your version of Safari is still supported. Please see Adobe Flash Player | Tech specs for supported OS and browsers.
If the Flash Player plugin is in the Plug-ins (disabled) folder it's because it's an older version that Apple has disabled in Safari. This has nothing to do with whether or not Flash Player supports the browser.
I'm not sure what you mean by "when i click on flash player itself i am told there is no application to open it." Flash Player.plugin only works in the browser to view Flash content in the browser. The plugin does not open files outside of the browser. If you have SWF files you'd like to view outside of the browser, then you'll need the Flash Player projector. However, based on your previous comments this doesn't appear to be what you are trying to do.
Google Chrome does embed Flash Player in it, while Firefox does not. Mozilla has also recently started blocking older versions of Flash Player in Firefox similar to what Apple is doing in Safari.
Following the 'clean install' instructions should result in you having the latest version of Flash Player installed that will not be blocked by the browser.
Maria -
SAP authentication plug-in needs to have been selected during the installation
Can anyone help me with an issue I have with the SAP authentication setup please. Unfortunately our BI 4.0 SP4 installation was installed without the SAP authentication being selected. On the setup document I have it says that the SAP authentication plug-in needs to have been selected during the installation. Does anyone know if it is possible to set this up retrospectively?
The document can be found on the following link. Setting up the SAP plug-in - Business Intelligence (BusinessObjects) - SCN Wiki
Thanks
SimonHi Simon,
As Sebastian said, this is a default installation, but you must select the correct one that you need, I guess that Enterprise is the default one.
Regards -
I,m start to install my adobe master collection cs5 in a new PC and during the installation ask me a aditional serial number to a previus version (CS4). I put the serial number of my cs4 and recived a message indicating that this number is not correct, but I check in my acount and is correct
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
Hello all,
OK so I do have Event Forwarding working - but I've noticed that when it's first configured I get messages similar to:
The description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The locale specific resource for the desired message is not present
If I alter the subscription (wecutil ss subname /cf:events) the forwarded events are rendered correctly.
However a product we are evaluating (which depends on event forwarding to work) always ends up with a couple of mal-rendered lines - always look something like:
Required Privs: %9
I built a standalone AD domain and joined the same 'problem' clients to this domain and re-configured Event Forwarding - there was no need to change the subscription format type to "events" and the events were forwarded correctly and also
the product we are looking at worked straight away.
It seems that when event forwarding is configured in our live domain (or any of the test labs we have) I always get the attached errors....
I've read a number of blogs that describe the issue and most recommend altering the subscription format - this however does not solve the issue entirely...
Has anyone else seen this issue and maybe found out how to resolve?
Thanks all
CarlYes,
I have ACS forwarder and OPSmgr Agent on Event log collector computer.
Event log collector computer shows some of the forwarded events incorrectly like "The
description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found"
When I change regional settings on Collector computer, event log shows all events(also previous) correctly.
Forwarded with ACS and Opsmgr Agent events
from collector computer were saved in DB correctly, even when event log show them incorrectly like "The
description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found" -
Having SCCM 2012 SP1 CU3 I attempted to do a pretty simple task.
Create a capture media for Windows 8 64 Bit and capture the OS.
The system in question is a Dell Latitude 6430u and OEM Windows 8.
The system ran as expected, the capture went as expected, but when I deploy the image (Back to the same laptop mind you)
The following occurs:
Windows could not complete the installation. To install Windows on this computer, restart the installation.
Things that I've tried:
Set the SATA to various modes as it was on RAID on as speculated in some posts
Saw a posting that suggests pressing SHIFT F-10 to get in to some prompt and run oobe; doesn't work here, I think.
Added Dell Driver Packs for the system
As for log files, I'll check C:\Windows\Panther and see what's there.
Any ideas on how to correct this? Is there a way to go in to the image itself to do so?Sorry, I'm not using CM2007, but CM 2012 SP1, CU3.
I went through the smsts log and found several instances where drivers were missing so I'm guessing that's why it pitched a wobbly about not being a suitable system for the Windows setup.
Failed to find a suitable device driver for device 'ACPI Lid'. OSDDriverClient 11/15/2013 5:54:57 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'USB xHCI Compliant Host Controller'. OSDDriverClient 11/15/2013 5:55:00 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'SDA Standard Compliant SD Host Controller'. OSDDriverClient 11/15/2013 5:55:00 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'RamDisk'. OSDDriverClient 11/15/2013 5:55:00 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'PCI Simple Communications Controller'. OSDDriverClient 11/15/2013 5:55:01 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'ACPI\DELLABCE\2&DABA3FF&0'. OSDDriverClient 11/15/2013 5:55:02 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'ACPI x64-based PC'. OSDDriverClient 11/15/2013 5:55:02 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic Monitor'. OSDDriverClient 11/15/2013 5:55:02 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'PCI Express Root Complex'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 1 - 1E10'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel Processor'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'USB Root Hub (xHCI)'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'ACPI Power Button'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Microsoft ACPI-Compliant System'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Microsoft Basic Render Driver'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Trusted Platform Module 1.2'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel(R) 7 Series/C216 Chipset Family SMBus Host Controller - 1E22'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'ACPI Fixed Feature Button'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic volume'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Motherboard resources'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device '3rd Gen Core processor DRAM Controller - 0154'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic volume'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic USB Hub'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel(R) QM77 Express Chipset LPC Controller - 1E55'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'System CMOS/real time clock'. OSDDriverClient 11/15/2013 5:55:06 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic USB Hub'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Programmable interrupt controller'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Standard PS/2 Keyboard'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Intel(R) 7 Series/C216 Chipset Family PCI Express Root Port 2 - 1E12'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Generic volume'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Motherboard resources'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Direct memory access controller'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Microsoft System Management BIOS Driver'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Disk drive'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Standard Enhanced PCI to USB Host Controller'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'USB Mass Storage Device'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Failed to find a suitable device driver for device 'Integrated Webcam'. OSDDriverClient 11/15/2013 5:55:25 PM 1168 (0x0490)
Which doesn't make sense since the image that I am trying to put on the system is the one I took it from. Before putting the image out I went to Dell's web site and got the Windows 8 drivers for the system and distributed them as I usually do.
I got the drivers from here -
http://en.community.dell.com/techcenter/enterprise-client/w/wiki/4372.latitude-6430u-windows-8-driver-cab.aspx
What I don't get is that I can take the Windows 8 install.wim and do an OSD task with it and there is no issue with drivers.
One other thing here is the log from the windows\panther folder:
2013-11-15 17:56:46, Error SYSPRP SPPNP: Failed to enumerate PnP DRP files. Err = 0x5[gle=0x000003f0]
2013-11-15 17:57:09, Error [0x0f0082] SYSPRP ActionPlatform::LaunchModule: Failure occurred while executing 'CryptoSysPrep_Specialize' from C:\Windows\system32\capisp.dll; dwRet = 0x5
2013-11-15 17:57:09, Error SYSPRP ActionPlatform::ExecuteAction: Error in executing action; dwRet = 0x5
2013-11-15 17:57:09, Error SYSPRP ActionPlatform::ExecuteActionList: Error in execute actions; dwRet = 0x5
2013-11-15 17:57:09, Error SYSPRP SysprepSession::Execute: Error in executing actions from C:\Windows\System32\Sysprep\ActionFiles\Specialize.xml; dwRet = 0x5
2013-11-15 17:57:09, Error SYSPRP RunPlatformActions:Failed while executing SysprepSession actions; dwRet = 0x5
2013-11-15 17:57:09, Error [0x060435] IBS Callback_Specialize: An error occurred while either deciding if we need to specialize or while specializing; dwRet = 0x5 -
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
SureshHi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh -
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?)
Maybe you are looking for
-
Problem with Ipad3 landscape position
I have a strange problem with my Ipad. When I open a particular page (www.fotohulp.nl/portret.html), and I hold the Ipad in the portret-position, the page displays correctly. However, when I rotate the Ipad to the landscape-position, this page dropps
-
Hi i would use this to parse String to Date : public Date parseFromString(String dateString){ try { java.text.SimpleDateFormat formatter = new java.text.SimpleDateFormat("dd/MM/yy"); return formatter.parse(date
-
Don't know how this happened (must have hit something by accident) but the URL type bar isn't there anymore unless I expand the entire page with the arrow thing on the top right corner. I'm unable to drag the corners to expand the page how I'd like.
-
Add a RFC into existing RFC MODEL
Hello Friends, Is it possible to add a RFC into existing RFC model, or I have to create everytime new RFC model while adding another RFC ? Regards,
-
Trouble printing to shared Win printer
At work there is an Oki C3200 laser printer connected via USB to an XP machine. I set my MacBook Pro running 10.6 to the same workgroup as the windows computer (via WINS tab of the Network pref pane) and set the printer as shared. My mac connects to