8.1.7 installation on Red Hat 6.2 failing on ins_rdbms.mk

I get the following error:
Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target install of makefile /db/CTM/rdbms/lib/ins_rdbms.mk
Exception Severity: 1
*** Cancel Dialog: ***
This is not the only one. It fails on the demo make file as well.
I have seen the malformed archive(JAR) in the log so I downloaded the 8.1.7 file again, compared the bytecount at least 5 times. Is there a bad file on the server?
Please help. I must get a legacy report out of an application that only runs on 6.2 red hat (long story)
thanks in advance
[email protected]

This link may help.
http://staff.in2.hr/denis/oracle/815install_rh6x_en.html

Similar Messages

Oracle 10g database installation in red hat 5

what are the packages needed for oracle 10g database installation in red hat 5?
what do you mean by yum way of installation?

Check on the release notes for your platform
This is for x86-64 Linux.. read it all, then you'll find the "6 Documentation Corrections and Additions" section you'll find the RPMs that you need
http://download.oracle.com/docs/cd/B19306_01/relnotes.102/b15666/toc.htm
then go to the official doc installation of 10gR2 on x86-64 Linux
http://download.oracle.com/docs/cd/B19306_01/install.102/b15667/toc.htm
Yum is a package management tool. This is what you'll be using to install the RPMs. But first you'll have to setup the Yum repository, usually what I do is stage the DVD media on the server then make it as a repository. If ever there's a specific (higher) version that I need then I just pull it on the RedHat Network.
There are a lot of HOWTOs about Yum. You may read on this link http://docs.fedoraproject.org/yum/en/
- Karl Arao
http://karlarao.wordpress.com/

Issue with OHS (EPM) installation on Red Hat 6.4

Hello Gurus,
We are facing an issue with the installation of Oracle HTTP server which comes with EPM 11.1.2.2 using EPM Installer on Red Hat 6.4.
When I select the OHS product it says, that the Oracle software is not certified on the current operating system, however it does not happen with any other product in the suite
Is Red Hat 6.4 64 bit not a supported OS?
I have installed all the required libraries mentioned here: Oracle&#174; Fusion Middleware System Requirements and Specifications
Also my NPTL version is 2.12 which is higher than 2.3.4 as mentioned here: Oracle&#174; Fusion Middleware System Requirements and Specifications
Any help will be highly appreciated.

John,
My installation went smooth, however when I start the configuration (Oracle Database) I am getting the following error while configuring the shared service registry:
Failed to navigate from RegistryWizardState: Error while initializing registry. See logs for more details.
My DBA says that he has provided all the following privileges to the schemas.
CREATE SESSION
CREATE VIEW
CREATE TYPE
CREATE TABLE
CREATE CLUSTER
CREATE TRIGGER
CREATE SEQUENCE
CREATE INDEXTYPE
CREATE PROCEDURE
CREATE ANY SYNONYM
DROP ANY SYNONYM
UNLIMITED TABLESPACE
configTool has the following exceptions:
[2013-09-10T10:44:53.748+05:30] [EPMCMN] [WARNING] [EPMCMN-01001] [oracle.EPMCMN] [tid: 10] [ecid: 0000K46JlSgAXNIMyqqYMG1IBegW000002,0] [SRC_CLASS: com.hyperion.cis.utils.oui.OUIUtilImpl] Failed to determine home via OUI: [[
oracle.sysman.oii.oiii.OiiiInventoryDoesNotExistException: The inventory pointer location /etc/oraInst.loc is either not readable or does not exist
    at oracle.sysman.oii.oiii.OiiiInstallAreaControl.initAreaControl(OiiiInstallAreaControl.java:1855)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:292)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:231)
    at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:180)
    at com.hyperion.cis.utils.oui.OUIUtilImpl.inventoryTemplateMethod(OUIUtilImpl.java:289)
    at com.hyperion.cis.utils.oui.OUIUtilImpl.findEpmOracleHomeFromInventory(OUIUtilImpl.java:67)
    at com.hyperion.cis.utils.oui.OUIUtilLinkageErrorProtectionWrapper.findEpmOracleHomeFromInventory(OUIUtilLinkageErrorProtectionWrapper.java:18)
    at com.oracle.preconfig.impl.InventoryPreConfigCheck.executeCheck(InventoryPreConfigCheck.java:23)
    at com.oracle.preconfig.PreConfigCheckTemplate.execute(PreConfigCheckTemplate.java:9)
    at Main.runPreconfigChecksAndExitIfFail(Main.java:142)
    at Main.main(Main.java:90)
com.hyperion.hit.registry.exceptions.RegistryException: Unable to create registry.
    at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:354)
    at com.hyperion.hit.registry.RegistryUtils.initUpgradeRegistry(RegistryUtils.java:272)
    at com.hyperion.hit.registry.RegistryUtils.initRegistry(RegistryUtils.java:105)
    at com.hyperion.hit.registry.Registry.createBasicComponents(Registry.java:2305)
    at com.hyperion.config.document.Storage.initRegistry(Storage.java:245)
    at com.hyperion.cis.config.ConfigRegistryUtils.initializeRegistry(ConfigRegistryUtils.java:384)
    at com.hyperion.config.wizard.impl.RegistryWizardState$1$1.commit(RegistryWizardState.java:228)
    at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:544)
    at java.lang.Thread.run(Thread.java:662)
Caused by: java.sql.BatchUpdateException: error occurred during batching: ORA-01950: no privileges on tablespace 'HYPSS_DATA'
    at oracle.jdbc.driver.OracleStatement.executeBatch(OracleStatement.java:6390)
    at oracle.jdbc.driver.OracleStatementWrapper.executeBatch(OracleStatementWrapper.java:248)
    at com.hyperion.hit.registry.RegistryConnection.createRegistry(RegistryConnection.java:344)
    ... 8 more
Any help will be highly appreciated.

Step wise installation on red hat as 4 and patches

hello,
plz send me step wise step oracle 9i installation on red hat AS 4 and required patches.

If anyone has such a beast, it'll be either Werner (http://www.puschitz.com) or Ivan (http://ivan.kartik.sk/)

BI 4.1 installation in Red hat Linux 6.5

Hi Experts,
we are planning to have one cluster environment in Red hat Linux 6.5.
1) Two nodes in cluster ( two red hat Linux 6.5 servers)
2) 1 server with Websphere as a web application server.
From the last two years i am completely working on windows environment. hence i would like to know few details about installing BI 4.1 in RHL 6.5.
What are the prerequisites to install Bi 4.1 in RHL 6.5, Even though it mentioned in installation guides, i would request someone to share there real time expertise.
I would like to have split deployment in the webapplication server ( Websphere ).I have performed the split deployement with ref of the below document which was created by James Rapp Improving the User Experience in SAP BI Platform - BI 4.1 and Apache 2.4 Supplement
it completely talks about tomcat+ Apache.
is it possible to perform the websphere + Apache split deployment.
Kindly share your expertise.

Hi Prasad,
Below are my thoughts on your queries.
1. Check Installing SAP BI 4.1 SP01 on Red Hat Enterprise Linux 6.x Step-by-step. This is an amazing blog by Brian. Hope you find it useful.
2. You cannot do a split deployment with Apache and Websphere. However you can do it with IHS (Web server provided by IBM) plus websphere. If you are using Websphere Network deployment version, IHS must be installed by default. For performing the split deployment, check https://websmp206.sap-ag.de/~sapidb/011000358700000171102014E/sbo41sp3_bip_wapd_unix_en.pdf See section 4.4.2 on page 27
Hope it helps.
Regards
Chinmaya

Oracle 9i installation on Red Hat Linux 9 URGENT

hi,
I live in london, I have tried a lot to install Oracle 9i Enterprise edition on Red Hat Linux 9, but couldn't do it, can any one help me to install it, I am ready to pay and visit any place in london for that purpose in the evening, if any one can help my mobiel number 07832 077672
best regards
asif

If you are only trying to learn, I would recommend either Fedora FC4 or OpenSuSE 10, and I would recommend installing ORacle Express Edition if you do not need advanced Oracle stuff (or you are not learning for OCP).
Again, use Werner's excellent site - http://www.puschitz.com or Ivan Kartik's site - http://ivan.kartik.sk/oracle/install_ora9_fedora.html to get good instruciton on installation.
If you want a free version that is as close to a supported Linux as legally possible, consider using WhiteBoxLinux.org, TaoLinux.org or CentOS.org linux. These are clones of RedHat Enterprise (the one that is supported). Or you could contact Novell.com and ask for an evaluation kit for SLES9.

Oracle 10g Installation on Red Hat Linux

Hi
I am trying to install Oracle 10g (Downloaded from Oracle Site) in a Linux Installation. I have checked with the following command about the Linux Version
# cat /etc/issue and the output is :
Red Hat Linux Release 7.1 (Seawolf)
Kernel 2.4.2-2 on an i686
Then I am giving #uname -r and the output is
2.4.2-2
Now Oracle Installation Guide for 10g for Linux is saying that
if the errata level is less than 25 on x86 system then install latest Kernel Updates.
Please Let me know from where I can get the Latest Kernel Updates appropriately and what I need to do to put that patch into Linux so that I can smoothly install the Oracle 10g.
Thanks and regards.
Keshav Tripathy

Jer is absolutely right.... just changing the values in oraparm.ini to reflect your kernel distribution will work for you.
For example the file contains:
[Certified Versions]
Linux=redhat-2.1,UnitedLinux-1.0,redhat-3
now to add your linux into it just check your version by issuing the command #uname -r
in my case the output was "2.4.20-8smp". I just appended redhat before this value and entered in the oraparm.ini file.
The new ini file looks like:
[Certified Versions]
Linux=redhat-2.1,UnitedLinux-1.0,redhat-3,redhat-2.4.20-8smp
[Linux-redhat-2.4.20-8smp-optional]
TEMP_SPACE=80
SWAP_SPACE=150
MIN_DISPLAY_COLORS=256
Now you are all set to install. I assume that all other pre-requisites have been fulfilled.
Thanks & Regards,
Rajesh Kumar
Team Lead UNIX

Oracle 10GR2 Installation Error Red Hat EL4

Hello,
I'm currently installing Oracle 10GR2 on Red Hat EL 4 and I get an error when
i'm 62% (Oracle Net Required Support Files 10.2.0.1.0). The error is the following:
Error in invoking target 'ntcontab.o' of makefile '/u01/app/oracle/product/10.2.0
/db_1/network/lib/ins_net_client.mk'.
When I look the make.log file it shows this:
/usr/bin/make -f ins_net_client.mk mkldflags ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1//usr/bin/make -f ins_net_client.mk ntcontab.o ORACLE_HOME=/u01/app/oracle/product/10.2.0/db_1/rm -f ntcontab.*
(if [ "compile" = "compile" ] ; then \
/u01/app/oracle/product/10.2.0/db_1/bin/gennttab > ntcontab.c ;\
/usr/bin/gcc -c ntcontab.c ;\
rm -f /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ;\
mv ntcontab.o /u01/app/oracle/product/10.2.0/db_1/lib/ ;\
/usr/bin/ar rv /u01/app/oracle/product/10.2.0/db_1/lib/libn10.a /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o ; fi)
gcc: installation problem, cannot exec `cc1': No such file or directory
mv: cannot stat `ntcontab.o': No such file or directory
/usr/bin/ar: /u01/app/oracle/product/10.2.0/db_1/lib/ntcontab.o: No such file or directory
make: *** [ntcontab.o] Error 1
My version of the gcc is 3.4.5-2

read the oracle installation manual and install all recomended RPM then problem will resolved. binunit rpm is also required.
i had got this problem and resolved by installing recomended rpms.

Error in Oracle10gr2 installation on Red Hat linux AS4 (64-bit) itanium2

Hello All,
I installing oracle10R2 on Red Hat Linux 4 U4 Enterprise Server but got the following errors:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer
from /tmp/OraInstall2007-04-26_11_11AM. Please wait....
[oracle@rx36 database]$ #
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGILL (0x4) at pc=0x2000000000038a4070, pid=6102, tid=2305843009216825632
# Java VM: Java HotSpot (TM) 64-Bit Server VM(1.4.2_10-b03 mixed mode)
#Problematic frame:
What should I do?
Thanks.
Message was edited by:
user571878

Hi,
Please refer to following statement to do:
=============
How to install Oracle RDBMS version 10.2.0.2 (or higher)
To install 10.2.0.1 and then 10.2.0.2 (or higher) on Linux Itanium, do the following :
[1]. Download Patch 5390722 and run the supplied OUI to install Montecito JDK and JRE into the new 10.2 home
* Unzip the patch
* Start OUI from Patch 5390722 and install JDK into the new 10.2 home
* Start OUI from Patch 5390722 and install JRE into the new 10.2 home
[2]. Install 10.2.0.1 into the new 10.2 home by running OUI from the 10.2.0.1 DVD :
./runInstaller -jreLoc $ORACLE_HOME/jre/1.4.2
NOTE: During the installation (on the "Product Specific Prerequisite Checks" page) the "Checking for Oracle Home incompatibilities..." check will fail. Click the check box next to it, so that the status changes to "User Verified", and continue with the installation.
[3]. Install 10.2.0.2 (or higher) into the new 10.2 home by running OUI from where the patchset has been unzipped :
./runInstaller -jreLoc $ORACLE_HOME/jre/1.4.2
Terry

Need a installer for red hat

I am on red hat linux 9 and i know that its not supported but i need an installer... can anybody tell me which installer do i need to install weblogic platform 8.1 SP3 on red hat 9
do i need a generic installer ( if yes where can i find one)
or will the platform 813_linux32.bin will work. also where can i find the jar file as i have installed previously with jar .,.. and i dont know if bin will work or not.

well i just installed the file that i wrote an it works fine i guess.. it installed perfectly and the medrec application from quickstart works fine

BO enterprise XI 3.1 installer for Red Hat 4

Hi,
We have BO Enterprise XI installed on our Red Hat 4.0 [we have customized it according to our product] boxes.
We want to upgrade to XI 3.1. Before buying the licensed version, we just want to take a look at upgrade process.
From where can we get a trail version for XI3.1?
Thanks,
Divya

You will get this by contacting SAP support.
you need to have S user account and rights as well to download this.
Thanks,
Anil
Edited by: Anil Bommu on Feb 17, 2010 6:18 PM

10gAS Silent Installation on Red Hat Linux AS 3.0

Silent installation on RHL AS 3.0 fails with Error : Packages version not per Installation requirement.
OUI is erroring out on gcc, compat-* packages. These packages on my machine are more recent than than the one required by the installer.
The install completes successfully if i skip the warning in interactive mode. Does any one know of any flag or environment variables that would skip the package check and proceed with silent installation?
Thanks

I use a little script which says:
echo Y | {path}/runInstaller -responsefile {path}/my.rsp
This echoes the mandatory Y into runInstaller.

ORACLE 8I Installation in Red Hat 6.0

Two questions about the installation:
1. How do I set up the Kernel parameters such as SHMMAX, SEMMNI in the RedHat Linux 6.0? This is the first requirement in ORACLE 8I installation.
2. How do I mount the CD? When I use mount /dev/cdrom /mnt/cdrom to mount the CD,
all the filenames are in upper case.

I would suggest checking out the RedHat site as they have several whitepapers/HOWTO's that will step you through rebuilding your kernel. Search on "Custom Kernel".
As far as the files names showing up in all caps....I have not seen this before and off the top of my head I'm not sure what could cause this problem. Good luck!

Oracle 8i installation with Red Hat Linux 6.2

Hi
Please help us in solving the below mentioned problem.
We are trying to install Oracle 8.1.7 under Linux 6.2 . During the installation the following error displays and could not able to finish the instllation. The problem is
Error in invoking target ntcontab.o of makefile /usr/local/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk
If any has a soln for this please reply to us. Thanks in advance
regards
Santhosh
null

Miguel Tsuboyama (guest) wrote:
: Pinwu Xu (guest) wrote:
: : Terry (guest) wrote:
: : : Hi,
: : : I am still stuck on DISPLAY error.
: : : The messages I get when I issue ./runInstaller command are:
: : : Initailizing Java Virtual Machine from
: /usr/local/jre/bin/jre
: : : Please wait...
: : : Xlib: connection to "QIS:0.0" refused by server
: : : Xlib: Invalid MIT-MAGIC-COOKIE-1 KEY
: : : Java.lang.Internal Error: can't connect to X11 window
server
: : : using 'QIS:0.0' as the value of the DISPLAY variable
: : : QIS is the server name that I am installing Oracle to.
: : : The manual says I should set it to
: : : DISPLAY=work_station_name:0.0
: : : export DISPLAY
: : The work_station_name is the name of the machine the monitor
: : you are facing to connects to, with X Window running. If
: : you have only one machine, simply typing
: : export DISPLAY=:0
: : suffices.
: : Hope this helps.
: : : but I don't have any workstations connected to the linux
box
: : : yet. I am installing oracle to a standalone machine. What
: is
: : : that work_staion_name supposed to be? Obviously using the
: : server
: : : name as work station name didn't do me any good.
: : Pinwu
: You must grant permission to connect to the XServer...
: If you XServer was started by root, you must grant from root
the
: permission via: xhost +localhost
: Regards,
: Miguel T.
Hi Terry,
I initially experienced the same "connection refused" message as
you from xlib when performing a local installation using GNOME.
My problem was to do with logging on to X as root (to mount the
CDROM) and then switching to the oracle account to do the
install.
If I logged to X as oracle I didn't need to change the default
DISPLAY value of :0 .
Daniel.
null

Weblogic server installation in red hat linux 5

hi i am new to the weblogic server i am trying to install weblogic server in redhat linux i downloaded .bin file from oracle
i enter these commands
chmod +x wls1035_oepe111172_linux32.bin
./wls1035_oepe111172_linux32.bin
The directory "/tmp" does not have enough space for extraction.
Please input another directory or [Exit]: Exit
i got the error message
please reply i will appreciate your hep

Steps for preparing the installation can be found here: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14142/prepare.htm#i1183981
To run the installation steps presented here can be followed: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14142/guimode.htm#i1082009

8.1.7 installation on Red Hat 6.2 failing on ins_rdbms.mk

Similar Messages

Maybe you are looking for