8.1-beta servlets do not work?

Hello,
          I'm using a web.xml file with 2 servlets in it that works fine
          in WLS 6.x and 7.x. Yet, it does not work in 8.1.
          If I delete the servlet and servlet-mapping elements I can
          deploy my webapp (in an ear) and it deploys. Otherwise it
          will not work.
          Has anyone else seen this with 8.1-beta?
          Thanks.

Are you getting any exceptions / error messages?
          --Vinod.
          "Mark Swanson" <[email protected]> wrote in message
          news:[email protected]..
          > Hello,
          >
          > I'm using a web.xml file with 2 servlets in it that works fine
          > in WLS 6.x and 7.x. Yet, it does not work in 8.1.
          >
          > If I delete the servlet and servlet-mapping elements I can
          > deploy my webapp (in an ear) and it deploys. Otherwise it
          > will not work.
          >
          > Has anyone else seen this with 8.1-beta?
          >
          > Thanks.
          >
          >

Similar Messages

Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

Question
better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
Details

As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
(3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
Flash Player \ #SharedObjects
If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
If the value is blank, you could try inserting a sensible value and see whether that helps.
Any luck?

Beta games will not work at all.

When I download beta games into peazip or anotherzip file. they either throw components of the game all over my desktop or, if I put it in a new folder, just do not work. All regular games work fine using this method, just beta games will not work. I extract from zip file onto my desktop in new file, open the exe. in that file to a blank black page. Called HP, they could not help me! I am going crazy with this,as my computer is only a few months old! HELP!!! Thank you very much to anyone who knows how to fix this problem! God bless!

Terri, welcome to the forum.
When you say beta games, I want to make certain that I understand what you mean. Is this a developer (Beta) or games that are in the beta testing stage? If they are beta test games, it isn't surprising that you are having problems. Beta test games simply, in many cases, are not ready for prime time. The best way to handle them is by checking to see if there are patches available. It would be rare, but possibly the only way to get them to work properly.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Flex Builder 3 Beta 3 Debugging not working with latest Flash Player Debug

First to emphasize that never had such issues with Flex
Builder 2 Beta 2 and Flash Player 9.0.47 Debug version.
I downloaded Flex Builder 3 Beta 3 and installed it. Then
trying to debug any Flex app (old or newly created) does not work.
I don’t get any errors, but after some research I saw
it’s nagging up on trying to connect to the Flash Player
debug version.
1. Uninstalled old versions of Flash Player (FP).
2. Downloaded latest debug version of FP 9 (9.0.115) and
installed it both for IE and Opera (Netscape-compatible).
3. Installed Flex Builder 3 Beta 3.
4. Created a simple Flex app.
5. Ran it in debug mode.
6. Showed a small window with title “Progress
Information” and a progress + text: Waiting for Flash Player
to connect to debugger…
7. Two minutes later I got the error: “Failed to
connect; session timed out. Ensure that: 1. You compiled your Flash
application with debugging on. 2. You are running the debugger
version of Flash Player.”
Any idea what is wrong? I tried to download an older debug
version but then FB 3 Beta 3 raises the error it’s expecting
version 9.0.115. I searched to download FB3 Beta 2 (because I
deleted it after downloading Beta 3) but unfortunately Adobe did
their best to wipe it out from their links.
Any help is welcome.
System Specs:
Windows Vista Ultimate
Flex Builder 3 Beta 3 Standalone
JRE 1.6 Update 3
-Dimitar

Hi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon

JSPs and Servlets do not work on Apache HTTP- Procesor Intel P4

Computer description: Intel Pentium 4 processor with 20GB HD
drive, 1GB RAM, Windows 2000Pro, Service pack II
Before installation:
We created a temporary directory on our Intel Pentium. 4
processor server (e.g. \TEMP).
Copied the contents of the Oracle* Server CD to the temporary
directory.
Renamed each copy of the SYMCJIT.DLL to SYMCJIT.OLD.
Set the java_compiler=none environment variable.
Installation:
We run the SETUP.EXE from the \TEMP\install\win32 directory and
install Oracle 8.1.7 EE Rel 3 Typical
Configuration tool Net8 Configuration Assistant succeeded
Configuration tool Oracle Database Configuration Assistant
succeeded
Configuration tool Starting Oracle HTTP service: 7 times error
message (java.exe has generated errors and will be closed by
Windows, You will need to restart the
program, An error log is being created)
HTTP server responses.
All Java programs do not respond (e.g. IsItWorking does not work)
After installation:
Open the jserv.conf file chack that ApJServManual is set to Off.
set ApJServLogLevel debug (will give more informative errors for
debugging)
set ApJServDefaultHost www.in.oracle.com (to your machine name
with the
domain name or IP address)
set ApjServDefaultPort 80000
Open the jserv.properties files and make the following changes:
bindaddress=www.in.oracle.com (Same name as ApJServDefaultHost
in jserv.conf)
port=80000 (same port as in the jserv.conf)
Enable all log options in jserv.properties:
log=true
log.file=/usr/local/apache/var/log/jserv.trace
log.timestamp=true
log.dateFormat=[yyyyMMdd HHmmss:SSS]
log.channel.init=true
log.channel.terminate=true
log.channel.serviceRequest=true
log.channel.authentication=true
log.channel.requestData=true
log.channel.responseHeaders=true
log.channel.signal=true
log.channel.exceptionTracing=true
log.channel.servletManager=true
Java servlets and JSP still do not redspond.
If we try to start HTTP server from Windows service, we always
get message: unable to locate dll: The dynamic link
library Perl.dll could not be found in the secified path (our
path: C:\oracle\ora81\bin;C:\oracle\ora81\Apache\Perl\5.00503
\bin\mswin32-x86;
C:\Program Files\Oracle\jre\1.1.7
\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;) and
error message: Could not start
OracleOraHome81HTTPServer service on local computer. The service
did not respond to the start or control request in a
timely fashion.
Starting Oracle HTTP service from Start/Programs/Oracle: 7 times
error message (java.exe has generated errors and will be closed
by Windows, You will need to restart the
program, An error log is being created)
We tested also modifications of oraparam.ini
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the CD
instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1
\DataFiles\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the CD
instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1
\DataFiles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\ win32\setup.exe). This will use the modified
oraparam.ini and pick up the information from the CD since the
absolute
locations are specified.
After that modification of oraparam.ini, the HTTPServer does not
respond at all.
So we undo changes on oraparam.ini and reinstall HTTP.
We copied SYMCJIT.DLL and jvm.dll from JDK 1.1.8_008 to
Apache\jdk\..
Since then at least the demo IsItWorking responses, but database
connection can not be established. But jsp demo still do not?
THX in advance
Neja

I'm still having problems with Portal config (as part of 9iAS) on
a P4 but i have cleared the hurdle of the HTTP listener (i
think).
I downloaded and installed the JRE that is P4 compatible from
www.sun.com (it puts it under c:\program files)
then overwrote all the files in the jre directories in the cd
staging area with the files from Sun (i.e. all symcjit.dll
locations). I also had to put a file "javai.dll" in the same
directory as the file "java.exe". This got the install all
working.
The service will fail first time because the install creates
another set of incompatible jre files. You must again search for
symcjit and repeat the above procedure.
You must also overwrite the files in the c:\program
files\oracle\inventory\jre directories (sorry cant remember exact
path).
Hope this helps.
Mark Gornicki
PS if anyone knows why Portal config hangs at 67%
(before/during/after processing "bulkload.jar" section) please
let me know :-)

Servlet reloading not working with WLS 5.1 sp8

          I downloaded and installed WLS 5.1's sp8 to fix the "java.net.SocketException: Connection aborted by peer: socket write error"
          problem. Although that problem is fixed, I have found that, however, the servlet (automatic) reloading does not
          work anymore. If I remove the sp8 from my Java system classpath and WL classpath (i.e. not using sp8), then
          the servler reloading works fine.
          Does anybody experience similar problem or have I forgot to do something?
          WLS properties/env vars setting:
          - weblogic.httpd.servlet.reloadCheckSecs=0
          - WEBLOGIC_CLASSPATH=%WEBLOGIC_HOME%\lib\weblogic510sp8.jar;...
          - JAVA_CLASSPATH=%WEBLOGIC_HOME%\lib\weblogic510sp8boot.jar;...
          Thanks in advance for any help.


          I've experienced the same problem with both sp6 and sp8. In both cases I performed several test, including
          - varied the value of weblogic.httpd.servlet.reloadCheckSecs
          - changes to the package depth the servlet belonged to
          - changes to the string length of the package names the servlet belonged to
          At best, the servlet would reload sometimes. I've moved back to sp5 and the problem has subsided.
          Note: I did not try registering the servlet to see how that would effect the dynamic reloading.
          Hope this helps
          - Dave
          "Michel Dinh" <[email protected]> wrote:
          >
          >I downloaded and installed WLS 5.1's sp8 to fix the "java.net.SocketException: Connection aborted by peer: socket write error"
          >problem. Although that problem is fixed, I have found that, however, the servlet (automatic) reloading does not
          >work anymore. If I remove the sp8 from my Java system classpath and WL classpath (i.e. not using sp8), then
          >the servler reloading works fine.
          >
          >
          >Does anybody experience similar problem or have I forgot to do something?
          >
          >WLS properties/env vars setting:
          >
          >- weblogic.httpd.servlet.reloadCheckSecs=0
          >- WEBLOGIC_CLASSPATH=%WEBLOGIC_HOME%\lib\weblogic510sp8.jar;...
          >- JAVA_CLASSPATH=%WEBLOGIC_HOME%\lib\weblogic510sp8boot.jar;...
          >
          >Thanks in advance for any help.

Servlet Filter not working in Oracel9iAS(9.2.0.3)

Hi,
May i know what cause the servlet filter not workinng in Oracle9iAS? Is there any library files missing? I have tried deploy the war file in Tomcat but is working fine but when i try to deploy in Oracle9iAS, the application seems like can't call the servlet filter.
Please advice.
Thanks.
Regards,
Ming Jade

I'm not exactly sure what version you are using.
Servlet Filters were introduced in Servlet 2.3 which was part of J2EE 1.3.
Oracle9iAS 9.0.2.3 is J2EE 1.2 compatible .
Oracle Application Server 10g 9.0.4.x and 10.1.2 is J2EE 1.3 compatible
Oracle Application Server 10g 10.1.3 is J2EE 1.4 compatible.
So the problem could be that the version of the product you are using does does not support the version of the servlet spec that covers Servlet Filters.
Can you upgrade to/install the 10.1.2 release as a minimum?
cheers
-steve-

Servlet forward not working with portal and oc4j

Scenario: page1.jsp, page2.jsp, MyServlet
Page1.jsp posts a form to MyServlet which then does some processing and forwards to page2.jsp.
Tests:
Works fine as a standalone app under oc4j.
Does not work as oc4j-driven portlet under latest portal. Specifically, it conks out on the forward.
Question:
Why?
What is the suggested workaround?
Michael Mogley
Software Engineer
LRN, Inc.

James, thanks for responding but you are misunderstanding the problem. I have been able to do multipage and form-submit portlets as you describe for a long time. The issue is I am not able to use the jsp-forward directive within a validation servlet when using oc4j with portal. Here is what I'm trying to do in pseudocode:
EntryPoint.jsp
1. Enter form data.
2. Submit form to MyServlet.
MyServlet
1. Validate form.
2. If valid, <jsp-forward page="success.jsp"/>.
3. Else, <jsp-forward page="failure.jsp"/>.
The above works fine when used in an app running on oc4j outside of portal. It does not work when the same oc4j app is portletized. By the way, the portletized app WILL work if I change jsp-forward to jsp-include. So the problem is obviously in the forwarding.
Michael
I would try looking at the samples in the PDK-Java V2 that show how to do form input and multipage behavior. The form input shows you how to make a form in a portlet that when you submit it, the entered values appear in the portlet. The multipage portlet shows you how to have a portlet display one page and then when you click on a link, it shows you the second page.
It may make sense to copy the same code used for the samples and just tweak it to create a form that passes values from page1 to page2.
For more info on V2 parameters, see the article "A Primer on Parameters and Events" in the PDK-Previews (for subscribers to Developer Services only). You can also see the V1 article called "Understanding the Parameter Passing Portlet" for more info on parameter passing with portlets in V1.
James
James

It seems mapproxy servlet does not work in 11.1.1.2

Dear Masters,
I used mapproxy?rtarget= to access mapviewer in JDeveloper 11.1.1.1 and everything was OK but when I switched to 11.1.1.2 mapproxy servlet does not return anything.
Is there any changes about mapproxy servlet?
Regards.

Hi,
in my web.xml file I see
<servlet-mapping>
<servlet-name>MapProxyServlet</servlet-name>
<url-pattern>/mapproxy/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
Frank

CRVS2010 Beta - Printing does not work in Google Chrome

I 've run into an issue with printing crystal reports using Google Chrome. I've tested this on 4 different computers with the same result. When a user clicks print the printer dialog does not appear and the report will not print.
The version of Google Chrome tested is 6.0.472.63

ActiveX print works on IE. But I had to do a bunch of ActiveX and security configurations in IE (Using Server 2008) - allow ActiveX download, etc., etc.
PDF print mode does not work on my computer either. However I have the same build on this box as the public download. The latest internal build does print and export to pdf with no issues. So, I suspect this was a bug, but it is now resolved and should be OK at RTM.
Ludek

Flex beta 2 - ComboBox not working

it seems like ComboBoxes are not working with sdk 4.0.0.10485; while they were with 4.0.0.7219
i simply click and nothing happens..
code is this:
    <mx:ComboBox>
        <mx:ArrayCollection>
            <fx:String>AK</fx:String>
            <fx:String>AL</fx:String>
            <fx:String>AR</fx:String>
        </mx:ArrayCollection>
    </mx:ComboBox>
but also using other kind of dataProviders it's the same..
am i mistaken?
Thanks!

ok, round 10,
this last round triggered my memory about a caching issue in lists that was resolved about 2 months ago its starting to smell a little like that so I need to do a search in jira and see if it is the same thing. In the mean time this is using the spark component, see if it gets closer to what you are chasing.
(it only works for item 1 and item 2 - i'm lazy )
David.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/halo" minWidth="1024" minHeight="768" creationComplete="appInit()">
<fx:Script>
<![CDATA[
import spark.events.IndexChangeEvent;
import mx.collections.ArrayCollection;
[Bindable] private var myStates:ArrayCollection= new ArrayCollection([
{Key:1,state:'ACT',name:'Australian Capital Territory'},
{Key:2,state:'NSW',name:'New South Wales'},
{Key:3,state:'NT',name:'Northern Territory'},
{Key:4,state:'QLD',name:'Queensland'},
{Key:5,state:'SA',name:'South Australia'},
{Key:6,state:'TAS',name:'Tasmania'},
{Key:6,state:'WA',name:'Western Australia'},
{Key:7,state:'VIC',name:'Victoria'}]);
[Bindable] private var myACT:ArrayCollection= new ArrayCollection([
{Key:1,state:'ACT',name:'Kingston'},
{Key:2,state:'ACT',name:'Manuka'},
{Key:3,state:'ACT',name:'Narrabundah'},
{Key:4,state:'ACT',name:'RedHill'}]);
[Bindable] private var myNSW:ArrayCollection= new ArrayCollection([
{Key:1,state:'NSW',name:'Cronulla'},
{Key:2,state:'NSW',name:'Gymea'},
{Key:3,state:'NSW',name:'Miranda'},
{Key:4,state:'NSW',name:'Yowie Bay'}]);
[Bindable] private var myInfo:ArrayCollection= new ArrayCollection();
private function appInit(): void
myInfo=myACT;
protected function cb1_changeHandler(event:IndexChangeEvent):void
switch(cb1.selectedIndex)
case 0: myInfo=myACT;
break;
case 1: myInfo=myNSW;
break;
cb2.selectedIndex=-1;
]]>
</fx:Script>
<s:DropDownList id="cb1" x="37" y="97" dataProvider="{myStates}" change="cb1_changeHandler(event)" labelField="name" width="180" prompt="select something" enabled="true" selectedIndex="-1"></s:DropDownList>
<s:DropDownList id="cb2" x="249" y="97" labelField="name" width="180" dataProvider="{myInfo}" prompt="select something" selectedIndex="-1" enabled="true"></s:DropDownList>
</s:Application>

Servlet tag not working

Hi,
          I was using the servlet tag in my html files to call servlets, enabled by
          Server Side Includes, which was working fine with Weblogic4.03 but since
          I've migrated to 4.5.1 this is broken, has the syntax for invocation changed
          to something else from
          <servlet name="VirtualServletNameFromWeblogicPropertyFile">
          </servlet>
          Now I'm seenig some funky behaviour, also my </servlet>s are returned to the
          browser as is.
          Also, I have a servlet which is calling making calls to an ejbobject proxy,
          which returns a Serializable object, whose class file is available in a jar
          which is on the Windows NT System ClassPath. Weblogic throws a
          ClassNotFoundException, saying that this class cannot be loaded even though
          it is using the same jar file to load the EJB's from.
          In other words, I have a class file in a jar which is on the CLASSPATH,
          but Weblogic does not seem to find it.
          All this used to work with 4.03,
          help needed,
          Abhi


          Hi --
          Abhishek Begerhotta wrote:
          >
          > Hi,
          > I was using the servlet tag in my html files to call servlets, enabled by
          > Server Side Includes, which was working fine with Weblogic4.03 but since
          > I've migrated to 4.5.1 this is broken, has the syntax for invocation changed
          > to something else from
          > <servlet name="VirtualServletNameFromWeblogicPropertyFile">
          > </servlet>
          >
          > Now I'm seenig some funky behaviour, also my </servlet>s are returned to the
          > browser as is.
          Are you doing it like this?
          1. <servlet name=foo></servlet>
          like this:
          2. <servlet name=foo> </servlet>
          or like this:
          3. <servlet name=foo>
          </servlet>
          2. and 3. should work. 1. will not because of a bug -- that is, you need to
          have a space or a return before the closing tag. This should be fixed in
          4.5.2.
          > Also, I have a servlet which is calling making calls to an ejbobject proxy,
          > which returns a Serializable object, whose class file is available in a jar
          > which is on the Windows NT System ClassPath. Weblogic throws a
          > ClassNotFoundException, saying that this class cannot be loaded even though
          > it is using the same jar file to load the EJB's from.
          > In other words, I have a class file in a jar which is on the CLASSPATH,
          > but Weblogic does not seem to find it.
          > All this used to work with 4.03,
          Classpath stuff has changed quite a bit (for the better) in 4.5.1. -- check
          out the classpath docs, and if you're still confused, post again.
          http://www.weblogic.com/docs45/admindocs/classpath.html
          http://www.weblogic.com/docs45/techdeploy/hotdeploy.html
          >
          > help needed,
          >
          > Abhi
          Hope this helps,
          -jg
          John Greene BEA WebXpress
          Developer Relations Engineer 550 California Street, 10th floor
          415.364.4559 San Francisco, CA 94104-1006
          mailto:[email protected] http://weblogic.beasys.com

Servlet Filter not working in JDK1.3.1

Hi,
I have an authorization filter which was deployed in WebSphere5.0 which is configured under datasource5(oracle thin driver) with jndi.
observed facts
===============
WebSphere 5.0 comes with jdk1.3.1. and supports datasource 4/5.0
datasource 5.0 will support servlet2.3.
Servlet 2.3 depends on jdk1.2.
Problem
========
When i am trying execute my filter in websphere its giving the below given error:
IntranetAuthorizationFilter was found, but is missing another required class.
]: java.lang.NoClassDefFoundError: java/lang/CharSequence
at java.lang.Class.newInstance2(Native Method)
at java.lang.Class.newInstance1(Class.java(Compiled Code))
at java.beans.Beans.instantiate(Beans.java(Compiled Code))
at java.beans.Beans.instantiate(Beans.java:77)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.loadFilter(WebAppFilterManager.java:292)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.getFilterInstanceWrapper(WebAppFilterManager.java:161)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.getFilterChain(WebAppFilterManager.java:208)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.handleWebAppDispatch(WebAppRequestDispatcher.java:1044)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:588)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:206)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:80)
at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:214)
at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:182)
at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:615)
at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:439)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:672)
My filter is not using java/lang/CharSequence anywhere.
Can someone figureout why this problem is coming.
Regards
Srinivas

As you probably know, CharSequence is an interface. Such classes as String implement this interface in JDK 1.4. So if you are trying to use filter compiled under JDK 1.4 then you certainly will meet the problem.

Preview in Safari Beta for Win not working

Hello All,
Anyone else having this problem?
I installed the new Safari beta for Windows (xp) and added it
to my Preview in Browser list in Dreamweaver, pointing it to
safari.exe, but when I try to preview, Safari opens and displays
the home page, not my Dreamweaver project page.
Any thoughts,
Scott

Hi Scott,
Safari beta for win has a number of problems. Loading local
pages is one of
them. I found if I preview in another browser like FF from DW
and then copy
and paste the page URL into Safari it works sometimes. Search
this newsgroup
for "OT: Safari for XP/Vista"
--Nancy O.
"scottmcll" <[email protected]> wrote in
message
news:f4u864$pkv$[email protected]..
> Hello All,
>
> Anyone else having this problem?
>
> I installed the new Safari beta for Windows (xp) and
added it to my
Preview in
> Browser list in Dreamweaver, pointing it to safari.exe,
but when I try to
> preview, Safari opens and displays the home page, not my
Dreamweaver
project
> page.
>
> Any thoughts,
>
> Scott
>

JPDK Servlets/JSP not working

Hi there,
I am facing a couple of problems related to oracle portal.
1-As i have installed oracle portal the application server doesnt run JSPs.
2-In addition to Oracle Portal I have installed JPDK and configured it as written in the documentation. I tried to run example servlet and jsp on it as given in the documentation, but as i write "http://server1:80/servlet/myfirst"
but it shows "The page cannot be found", but if i write http://server1:80/servlet/IsItWorking, it is running perfectly.
IS there any configration problem or what?
Thanx in advace for any one who provides answer to any of the above two questions.
Hassan

Hassan,
1. What version of Portal do you have installed. I have not seen any issues displaying JSPs from the production version of Portal. 3.0.6.6.5 and 3.0.7.6.2. If you have an EA release the JPDK install guide tells you how to download the new version of OJSP.
2. If you get the page cannot be displayed error, this means that either it does not recognize "myfirst" or it cannot find the class file. you can try to call the Adapter directly. http://host.domain/servlet/oracle.portal.provider.v1.http.HttpProvider
If this fails, check the jserv.properties to make sure that you specified the correct location to find the provider.jar.
If this works, then you do not have the myfirst alias setup correctly in the zone.properties.
Check both of these files, but first you will need to resolve the JSP issues with Apache.
Hope this helps,
Sue

8.1-beta servlets do not work?

Similar Messages

Maybe you are looking for