8.1 Disabled number keys and audio driver

I have a Lenovo G780 lap top that I just bought about a year in a half ago.  I purchased it from Lenovo with Windows 8.0.  When I updated to 8.1 recently, it wiped out the use of several of my numeric keys on both the number keys at the top across on my keyboard and also on my numeric keypad.  The update also wiped out my Dolby Audio Driver.  Does anyone know how to resolve this?  I already had a Microsoft tech dial into my laptop remotely and he was unable to resolve it and referred me to Lenovo.  Ugh.  BTW - the only way I am able to type several the the different numbers is by connecting an external keyboard to my lap top.  These are the numbers that work using the number keys going across the top of my laptop keyboard: 123456   These are the numbers that work using the laptop number key pad on the right of my laptop keyboard:  13456789  In both cases, the zero key is not working.

Punkinero,
For the “unable to start the Dolby audio driver”, you can use the following knowledgebase article to correct it:
http://support.lenovo.com/en/documents/ht100126
For the non functioning numeric keys, try doing this:
- Go to the Control Panel, Ease of Access Center, Set Up Mouse Keys. At the bottom under Other Settings: Use mouse keys when NUM LOCK is: Make sure OFF is selected.
I hope this helps!
Cheers, Erich_Lenovo

Similar Messages

  • HP G62-348CA number keys and arrow keys not working

    Good day Experts! Can someone help me fix my laptop? I got G62-348CA unit. only number 5 and 6 in my number keys are working and also arrow keys down and right are not functioning. at first it was built with windows 7 home premium 64bit but then i have to reformat my laptop with windows 7 ultimate but i dont have available 64bit so i install 32bit of the OS. before i install the OS, number keys and arrow keys are working fine but after I reformat my laptop with ultimate 32bit, the said keys are not working. please guys help me. im having trouble with my unit and i dont know what to do. its pretty bad i dont have any idea. all the best with you guys and i'm hoping for your fast and kind response. thank you!

    Because the operating system does not affect the keyboard in that way . .. If the operating system has issues it would switch keys or assign wrong characters.
    I have replaced over 200 keyboards because of such issues

  • Keyboard Number Key and Directional Key Issues

    This is a problem with the keyboard number keys and the Plus Key on the number pad, the number keys at the top of the keyboard above the letters, and the  directional keys at the bottom of the keyboard next to the alt/ctrl keys.   When pressed they are malfunctioning as follows, and I am actually typing the result on the keyboard numbers or number pad keys to demonstrate the result. Keys at top of keyboard: Pressing the Dash Key: `1Pressing Number One:  `1Number 2 works finePressing Number 3 dims the screenPressing Number four: 54Pressing Number five: 54Pressing Number six: 67Pressing Number seven: 67Pressing Number eight:  \8Number 9 works finePressing Zero:  -0 Number Keypad: Pressing Number one: +1Number 2 works fineNumber 3 works finePressing Number four: 64Number 5 works finePressing Number six: 64Number 7 works fineNumber 8 works fineNumber 9 works fineNumber 0 works fine Keypad symbols: Pressing Plus Key:  +1 Directional Keys: Right Arrow Key:  Cursor moves up a random number of lines in a document.Left Arrow Key works fineUp Arrow Key works fineDown Arrow Key (inserts back slash):  \  I have searched and searched and have not been able to find a solution to this or even another post outlining this type of problem.  Please Help.    

    Hello there,
    It sounds like you're going to either need your keyboard replaced, or have the buttons fixed. You can either have this done professionally, or personally, since the warranty states that you're permitted to replace the keyboard. For more information on how to replace it, visit this pdf and scroll down to keyboard, under replacement. https://www.google.com/url?sa=t&source=web&rct=j&ei=4U2bVeSZOMSu-QGwtIuIBQ&url=http://h10032.www1.hp.com/ctg/Manual/c03935332&ved=0CCIQFjAB&usg=AFQjCNFI7Za3MTOYi3U2gqYwky_v2R-eIA&sig2=BEpyqWkFFkSjkR0z4r5v-Q
    I apologize for it being a Google link, since I am on mobile.
    Best Regards,
    Shawn

  • HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card

    i want  HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card (Windows 7) 

    Hi:
    Below is the link to the support and driver page for your notebook.
    http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c03061225&lc=en&product=5163244&quer...
    Your model uses the AMD graphics driver only. Don't install the Intel one.

  • Zoom H4n and audio driver error -2

    I have a newish Intel Macbook with GB 09, and a Zoom H4n recorder that I have been using as an USB input device into GB with no problems.
    However, GB no longer recognizes the H4n. The drill is to have GB open and connect the H4n to a USB port. The computer detects the device and asks if I want to use it as an input device. I say yes, and then this message appears:
    "error code -2 was returned by the audio driver"
    Is this a problem in the Mac? Do I need to reinstall something?

    Hi there,
    Did you by any chance ever find a solution to your problem with the H4n?? I'm having exactly the same problem. I think it might have something to do with a preference file. I didn't disconnect the zoom properly before unplugging it, and since then I am having the same problems as you??? Very frustrating....
    Thanks.

  • How to disable action keys and hotkeys??

    Hi, ihave HP G56 Notebook PC
    i have all these strange hotkeys on my laptop doing non-standard things.. it's pretty confusing.. Alt-F4 doesn't work anymore, for instance, since the F4 key is now a monitor key.. How can i make it also the F1-F12 keys by default.. like when i press F1 it's just F1.. because when i play a game on my laptop when i press F1 key it doesn't work..
    Please Help me!!
    Thanks..

    You Can disable that functionality by disabling "Action Keys Mode" in the BIOS...
    Here is the document, that will help you with it... http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Software Modem and Audio driver errors!!

    I currently have a Toshbia Satellite A215 S7413. Running on Windows Vista. Recently when downloading intunes, I incurred Errors in my Software Modem and Realtek Audio within my device manager. Unable to update drivers. i currently have no sound. I need a detailed description on how to repairs these. Message reads "Windows cannot read the device driver for this hardware. The driver may be missing or corrupted. (code 39). Any suggestions?

    Satellite A215-S7413 
    You have tried reinstalling this driver?
       Realtek Audio Driver for Windows Vista
    -Jerry

  • DV7-4060si beats and audio driver issue

    Whenever I try and change the EQ in the Beats application, or the bass/treble in the tone controls, nothings. I click save, then when i go back to it, its reverted to default.
    Also, when I try update my audio driver, I reboot and suddenly theres no sound. This is fixed by reinstalling the original drivers.
    Help?

    Try and install driver from here and check ftp://ftp.hp.com/pub/softpaq/sp50501-51000/sp50642.exe.
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • G560 and audio driver with XP

    Iv'e upgraded my G560 to XP. I get a blue screen sometimes, it mentions a driver problem, unfortunatly I did note not down the exact error mesage, but it was very generic, so I do not know what device's drive coudl cause this.
    I see 2 oddities in Device manager:
    Under "Monitor", "Thinkpad Display 1366x768" is listed twice.
    Shouldn't there be only one monitor listed? Can I disable one?
    Under "Sound, video and game controllers", I see 2 audio related drivers listed:
    Conexant SmartAudio HD
    And
    Intel(R) Display Audio
    Do I need both drivers?
    Thanks for any help,
    Lukas

    Quote from: flobelix on 14-January-13, 02:45:17
    If you want help it's bad idea to introduce yourself with bashing posts. Please stop that MSI bashing.
    The Realtek driver works problem must be elsewhere. What means it doesn't work? No sound on front or rear panel connectors? Are sure to have used XP64 and not XP32 drivers? Does devbice manager of windows show the device unknown or with an exclamation mark?
    I only use rear panel because of my 5.1 setup, and the speaker works perfectly in windows 8 x64 and ubuntu
    My machine use triple boot OS'es >>> xp x64, win 8 x64, and ubuntu
    And yes, there are several exclamation marks in device manager, and the realtek driver doesn't work at all, I installed all the other  xp x64 driver from the product support section
    I have erased the xp x64 partition, and I tried to install the realtek driver in xp x64 virtual machine, and it even shows the same symptoms, either failed install or successfull install with no sound at all, and sound section of the control panel, said "no audio device"
    This is the first time I encountered so many problem with one mobo during years of my computer hobby
    Yes, I want help, but I don't count much on it
    MSI may ban me, MSI is very much welcome to take any further actions on me
    Since this isnt the only forum, where I posted it
    Talking about responsibility and morality, being obnoxius in computer industry

  • Disable F11 key and Alt E keys in IE Browser running Captivate Movie?

    I am creating a training module where as part of the user input (that will trigger various functions on screen in Captivate 4), the user has to hit at one point or another F11 and Alt E.
    Of course, when he hits F11, the IE window maximizes out, as well as triggers the desired function on screen.
    Same when he hits Alt E, the "Edit" drop down in the IE toolbar drops down.
    Any way to use some kind of script in Captivate to disable those when the movie is running?  I can't have all the users of this training disable these in their registry files...that would not work.
    Any help would be appreciated.
    Thanks.
    Rob

    Well, sort of.
    I found a setting on my LMS that plays in full screen mode, which solved the problem.

  • The keyboard number keys and symbols above them will not work. I nothing at all except a space or they last letter key used, but works fine in other applications such as MS Word. The number pad works just fine. Any one have any thoughts on this.

    I had to do a reinstall and upgrade to Windows 7, so I may have missed something. Running a 64bit OS. Problem only seems to be in the browsers.

    You may have '''Switched ON Caret Browsing'''. press '''F7 (on Mac: fn + F7)''' to toggle '''Caret Browsing ON/OFF'''
    * click '''Firefox''' button and click '''Options''' -> Advanced -> General -> remove Checkmark from '''Always use the cursor keys to navigate within pages'''
    * http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * http://kb.mozillazine.org/Accessibility_features_of_Firefox
    Check and tell if its working.

  • NForce2 and New Athlons and audio drive bay

    Read it here
    BIM

    This was interesting:
    Quote
    We believe that this will be the best performer in the neighborhood for a while and that’s why AMD was using pre-production Nforce 2 boards from Asus to show the power of their new FSB 333 processors.
    We think that Nvidia learned a lot from the original Nforce and that the same mistakes will not be repeated and that the stability of Nforce 2 will be on higher level than original Nforce with of course, more mature drivers.
    Motherboards should be available in middle October at the earliest.
    Take Care,
    Richard

  • My laptop numerical light shows "on",but number keys not working?

    This problem started a week ago!

    Hello , Welcome back to the HP Support Forums!  To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I read your post about the Number Keys, and wanted to help! Please review the following documents, as they may help to resolve the issue for you:HP Notebook PCs - Notebook Keyboard Troubleshooting (Windows 7)HP Notebook PCs - Some Function Keys or Keyboard Shortcuts Do Not Work Correctly with Windows 7 Please let me know if this information was helpful by clicking the thumbs up below.
    Regards!

  • Install pc sound and Audio

    hi i actually lost ma sound and Audio drive please help me
    thanks

    Hi,
    Check Cheryl and Rakhmad XP general guide which You may find here.
    In first part You will find answer on Your question.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Sound and audio device

    hey i just format my Compaq C707TU laptop and its sound and audio driver not working, please suggest me for proper driver to install in my laptop.

    Hi,
    For XP:
    Before Conexant Universal Audio Architecture (UAA) here
    Conexant High Definition Audio Drivers here
    This will create a swsetup folder in c drive ("C:\swsetup\sp34200")
    Installing Audio drivers may result in an error. But continue with the following steps to get the audio driver installed correctly.
    Open the Device Manager:
    1. Click on Start and select Run. Now type devmgmt.msc and press enter.
    2. Right click on "Audio device on High Definition Audio Bus" and click Update driver.
    3. Select "Install from a list or specific location"
    4. Click Next. Then select "Don't search, I will choose the driver to install"
    5. Click Next and then select "Sound, video and game controller" from the list.
    6. Click Next and then click Have Disk.
    7. Click Browse C:\swsetup\sp34200 folder and select the .inf (wis30b2a) file and click open and Continue with the onscreen instructions.
    Similarly install Modem Drivers:
    Conexant HDAUDIO Soft Data Fax Modem with SmartCP here
    1.Right click on "Modem device on High Definition Audio Bus" and click Update driver.
    2. Select "Install from a list or specific location"
    3. Click Next. Then select "Don't search, I will choose the driver to install"
    4. Click Next and then select "Modem" from the list.
    5. Click Next and then click Have Disk.
    6. Click Browse C:\swsetup\sp33890 folder and select the .inf (wis30b2b) file and click open and Continue with the onscreen instructions. 
    For Vista:
    Conexant High-Definition Audio here
    Conexant HDAUDIO Soft Data Fax Modem with SmartCP here
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Maybe you are looking for

  • BlackBerry Q5 reset to factory setting after upgrade

    This Topic has been Moved for correct placement

  • Why is the screen fading when I move my iPad2 horizontally?

    Every time I move my iPad2 horizontally, the screen fades to the point where it can hardly be seen. It restores when it is moved back vertically. Any ideas?

  • CS5 student version

    Hello everybody, I've just bought the Adobe Master Collection CS5 for Teachers and Students. I am student a I have just created my company. I read that we can use this licence for a "commercial use". Does it mean that I can use it with my company too

  • Updating Page from a PC

    Ok being totally new to this web thingy I just wanted to know if it is possible to do updates to a site on .Mac from a PC? I have designed a webpage with numbers that change daily but I don't have access to a Mac at the office.(sad I know) Do updates

  • Help needed with AdvancedDataGridColumnGroup

    Hi Guys, I have written this code. I dont know where i'm making mistake, but i am not able to get output. My code is as follows: <?xml version="1.0"?> <mx:Application xmlns:mx=" http://www.adobe.com/2006/mxml" creationComplete="create()"> <mx:HTTPSer