8.1 full screen problems landscape

Since updating to 8.1 Tapping to view videos in full screen goes to portrait full screen instead of landscape full screen while in landscape position. There are also problems trying to full screen in portrait position.
i pad mini retna 16 gig
Geeno12

Your statement is a bit vague as to where you see this behavior.... In the Videos App, Safari, YouTube? Every video In every app? WIthout more details, try the basic troubleshooting steps. Clear Safari, close all apps, reset your iPad. If that doesn't help, reset all settings.
Go to Settings>Safari>Clear History and Website Data
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.

Similar Messages

Macbook Pro connected to HDTV full screen problem

I connected my Macbook Pro to my TV via HDMI. When i have an application on the TV (safari) and press the full screen button (upper right corner with the 2 arrows) my Macbbok display shows this grey area. If fulscreen an application on the Macbbok display the same thing happens. Aslo when i navigate through the full sceen apps in one display hte other display also changes. Is there something that solves this problem?

This is just an educated guess, but I think your problem may be distance. It sounds like you've got 60' of cable running to a splitter, then more cable to two TV's that are 50' apart. This article seems to indicate HDMI distance isn't reliable with that much cable.
http://www.bluejeanscable.com/articles/how-long-can-hdmi-run.htm
An easy test would be to try it with shorter cables. If that works at least you know where your problem lies.

.Swf file full screen problem

Hi, i'm using FMS 4.0 to perform an rtmp stream and an .swf player, built in Flash professional to open the stream!
My problem is that when i embed the swf into my site (www.livezone.gr), all the buttons work except of the full screen button! To embed the swf file i have uploaded it to my web server first in a folder which also includes the Skin.swf file and
i use the following code to embed it :
<iframe src="My Video.swf" frameborder="0" width="610" height="480"></iframe>
The problem is only when embeding it,otherwise when i open it directly from my webserver or my pc everything works fine!
.That's my only problem,if you can help me solve it everything will work like a charm!
Thanks in advance, Michail Papamichalakis

open the fla that published your swf. click file>publish settings, tick html if it's not already ticked. click the html tab>click the template combobox and select flash only - allow fullscreen.
then click file>publish.
you should see your swf file (re)published and an html file in the directory with your fla.
put the flash published swf and html in the same directory with your iframe containing html file and change your iframe tag to:
<iframe src="Live%20Streaming%20player1.html" frameborder="0" width="610" height="480" ></iframe>
assuming that's the name of the html file published by flash.

Full Screen problem opening PDF on PC projector

Using Flash CS3 on Mac - creating both Mac and PC projector files to go on a CD presentation
Ok I have come across the following problem.
When the CD is inserted the presentation starts automatically (on PC) and gives a list of PDFs which can be opened using EXEC fscommand. All works fine with the Mac version but on the PC version the Flash projector opens in Full Screen Mode and runs ok until I choose to open a PDF, then the presentation changes to Windowed Mode!!!
Is there any way to stop the PC version of the projector leaving Full Screen Mode when a PDF is selected
Any help would be appreciated

hi Hordika,
Thanks for Posting!
Try Checking with Background Programs.
Try Following a Clean Boot Procedure
http://support.microsoft.com/kb/929135
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Full Screen Problem With Dual Monitor Viewing

I have a 64 Bit system, Chrome browser and with flash player built in. I am attempting to view videos on a 2nd monitor while working on the primary monitor. I have tried this on various sites, TNT.tv, USANetworks.com, etc... I select full screen viewing. A message is displayed to exit full screen press escape. However, when I attempt to do anything else automatically exit full screen on the second monitor. This should not be an issue and with the way most people view video online, they are doing so on a 2nd monitor or TV. I have done a google search and it is a common problem, but there is no solution that seems to work.

I have just posted the same question - missed yours.
Adobe could you take a look into this - I think solving this problem can't be that hard.
jef

Full screen problem in firefox

Hi there,
I have (nearly) completed a project in which i have used a
full screen technique which has worked fine.
Unfortunately, when I open the html file in firefox the swf
is not displayed properly (ie its all squashed at the top of the
browser window).
When opened in safari & explorer etc it works fine, is
there any reason for this and if so how can I overcome this
problem?
Thanks (in advanced)
U.G
View
this in firefox to see problem

Any chance your video card might have "video" related settings that might be interfering? While I'm not suggesting that you switch browsers, trying to reproduce this on another browser will give us a datapoint to see if this is firefox specific. I would recommend giving both IE or Chrome a try to see if it still occurs.

IDVD, jerky when played + full screen problems

Dear all,
I'm new to iDVD and am not sure what I've done wrong.
I made QT movies from FCPx and imported them into iDVD. First I had problems with keeping it widescreen but have seem to have sorted that out. However now I have 2 more problems that have come up:
1. Everything is widescreen but when I click on the chapters to view the video's, it automatically stops being full screen and goes down to a smaller screen and then you need to click 'full screen' for it to go back, this only happens on a few of them.
2. Some parts of the DVD don't work, the footage goes all funny like ghosts and it jumps around and doesn't play nicely, then all of a sudden it works for a bit, then back to not working. This is the same on TV or MacBook Pro
I tried using 2 different themes and the same thing happened. Any thoughts?

then my thought
I made QT movies from FCPx and imported them into iDVD
.qt, .mov etc are containers - What codec are Your movie built as ?
open movie in QuickTime Player and open inspector and read Codec: ?
or
free space on Start-Up (Mac OS) hard disk. HOW MUCH ? (others of NO interest)
I do from FCE/P do like this
FCE/P to iDVD
Several things
• How to go from FCE/P to iDVD
• Free space on Start-up hard disk
• Encoding
• Brand and type of DVDs used
• Burn speed set
• iDVD BUG
• Chapters
How to go from FCE/P to iDVD I do
• Disable Screen and Energy saver
• IMPORTANT --> FIRST in FinalCut - Mix Down Audio under Sequence Menu / Render Only / Mix-down
• Export out as a QuickTime .mov file
• Select with Mark - Chapter Mark
• Not as Self-Contained (not important but saves time and space)
• NO QUICKTIME CONVERSION (IMPORTANT)
This QT.mov file I import into iDVD from within iDVD.
Free space on Start-up hard disk
I set a minimum of 25GB (for Mac OS and iDVDs temp files)
Encoding
• I use Pro Quality encoding
Brand and type of DVDs used
• I use Verbatim
• I use DVD-R
Burn speed set
• I set down this to x4 (or x1)
iDVD BUG
• One can not go back to movie-project for any alterations and then go back to
the iDVD project. It will notice and ask You to either Up-date or Cancel. Neither
of them will work.
Medicine - Start a brand new iDVD project.
Use of Chapters
• I only use a to z and 0 to 9 in naming them. NO other symbol/letter !
• NO Chapter-mark at very beginning - iDVD NEEDS TO set this by it self
• No Chapter marks in or within two seconds from a transition
(Way around this last one - Export movie as QT full quality and NO Chapter marks
Import this into a new Movie-project and now You are free to set C-Ms where You want
them except at very beginning - still)
Material used to build movie
• video - I use streamingDV (or convert all other to this eg .mp4, .avi, .wmv etc)
• audio - I use .aiff 16-bit 48kHz or from Audio-CD (44.1kHz) - no .mp3 or direct from iTunes
• photos - I use .jpg - no .bmp etc
Trash iDVD pref. file and run Repair Permissions - and have a re-try.
Run a CLEANING-DVD from tiome to time
from post ??
May not be relevant, but I had the same problem with iDVD, where burned DVDs showed a green screen. It was cured by quitting Quicksilver and Quickeys as well as disabling sleep and screen-saving
Yours Bengt W

PSE 6 - Dual Monitor Full Screen Problem

I've got a Thinkpad (with NVIDIA Quadro M140 integrated graphics) connected via DVI to a Samsung SyncMaster 206BW monitor using Vista Enterprise.
I've set up my workspace as Dual Monitor, DualView. My Font DPI is set at 96 (Default).
When I click Maximize on the Thinkpad LCD, PSE 6 opens fully and correctly.
When I click Maximize on the Samsung external monitor, PSE 6 opens a window that is larger than the monitor AND there are no bars at the bottom to shift the display. Therefore, I cannot see about 15% of the right side of the window when in Maximum/Full Screen mode.
PSE 6 appears to be the only program that has this problem.
I cannot adjust the monitor, since I'm connected via DVI.
All video drivers are current.
Is there a fix for this problem?

I haven't seen this occur on my Macbook pro with secondary or triple monitors. Is this happening with all fullscreen content (eg. YouTube)? What browser and Flash Player Version are you using? Also, is this a retina macbook?

Acroread full screen problem - dual display on Linux machine

Hi:
I am running Linux Fedora core 15 on an HP laptop that I use for presentations. I have dual displays set up and run my presentation software (opera and acroreader) in the external monitor in full screen mode. This works fine for opera, but when I try to use acroreader, it only appears on the laptop's built in monitor when in full screen mode. Any suggestions on how to get it on the external display?
Thanks.

When you normally play iTunes on a secondary monitor (23" Cinema on the side) and then disconnect to go mobile, there's a problem - can't get video window to show up anywhere without changing preferences to have video display in iTunes window or art window. Disabling spaces, checking display, "detect displays", nothing else works.

Photoshop CS4 Zoom and Full Screen problems

At certain zoom percentages, my art looks fuzzy. What could be causing this? It looks like I need to Threshold the art, but if I tap the Zoom Tool on the page it clears up and looks like it's supposed to. It usually looks fuzzy after I've zoomed using the Zoom Tool to select an area, not just tapped it on the screen. Also, after going to Full Screen mode, and after taking a snapshot (using Snapz Pro X) when I hit command F again, resize the snapshot and close it, my windows are out of order. The document I took a pic of is in the background. It's still "hight lighted" by which I mean if I hit command W (Close) it closes it, even though it might be behind three other open windows. It would be like if you have three Safari windows open and when you hit close, it closed the very back window, not the one you were looking at and meant to close. Any help? I attached an example of the behind files. It's just like that after I get out of the zoom. The one that is actually in "front" is the darker gray bar one that's actually behind two other files. Says (Layer 14, Alpha 1 copy 2/8)

My video card is NVIDIA GeForce 7300 GT. I tried turning off the OpenGL and that does seem to help. Is my video card not good enough for the new Photoshop? Also, any suggestions on why when I go to full screen, take a snapshot (Snapz Pro X), go out of full screen and save the snapshot and close it, the next file that is "in front" is behind two or three other files? I've hit close several times and accidentally closed the wrong file because I didn't realize it was the front file, since sometimes I can't even see it. It hasn't been a major problem, since it will ask me to Save if I haven't saved, just an annoyance. I have to reopen the file and am not longer able to use my history if I want to go back and make changes. Plus if it is a large file, I have to wait for it to open. And it makes it a hassle for me because they are all out of order then, there is no rhyme or reason to what will actually be the front file, so I close more than one I don't mean to. I watch now, but it's a hassle I shouldn't have to deal with. And since Expose no longer brings all the files of a program to the front, it is even more frustrating, since they can even be behind Finder windows. It may be a Snow Leopard issue, but I don't know. Any suggestions appreciated. Thanks.

Mountain Lion Dual screen window Full screen problem?

I could not upgrade from Snow Leopard to Lion on my iMac because dual screen operation was broken when a window on one screen was set to full screen. Has this been fixed in Mountain Lion?

CuckooPint wrote:
I could not upgrade from Snow Leopard to Lion on my iMac because dual screen operation was broken when a window on one screen was set to full screen. Has this been fixed in Mountain Lion?
Hey Cuckoo
i Use an iMac with 2 dual screens and the problem you are describing is fixed in the final build release of ML.
i have not seen the breaking of activity when switching too full screen on even all 3 monitors. so looking good in the multiscreen support.
cheers

MacBook Pro (Fall 2013) - display lag / full screen problem on 10.9.2

I have a Macbook Pro that I bought last November.
Specs: 2.6 GHz Intel Core i5, 8 GB 1600 MHz DDR3, Intel Iris 1024 MB, 500 GB Flash Storage.
It was a pretty big upgrade from my Fall 2010 Macbook Air. When I first bought it a couple times the screen scrambled for half a second on ocassion. I had Apple check it and they found no problems with the hardware. After a software update, that has never happened again.
However, in the last month (after I updated to 10.9.2) I've had two issues - both display related:
1 - When the display is off I normally hit the trackpad and the display instantly pops back on. Now however, the screen comes up black with only the cursor visable for about 5 seconds. The cursor moves fine, so the screen isn't frozen, but this is new and a lag I've never had on any on my macs before.
2 - Full screen is messed up ever since the update as well. It's either blown up, or sqeezed, but never actually in full screen. See picture below:
I ran the disk utilty in start up mode and repaired my disc and permisions. Ran Onyx. No change. I hope 10.9.3 will address this! Any suggestions or information are appreicated.

Have you reset the SMC and the PRAM?

10.6.3 and full screen problems!

Ever since updating to 10.6.3 I can't view any videos or photos in full screen mode...firefox, safari, iPhoto, preview, etc all just give a black screen (though I can still hear audio from videos). Extremely frustrating! In iPhoto, if I double click a photo to view it, it now does absolutely nothing...full screen mode just shows a black screen (I also can no longer edit photos). I am also having major permissions problems with windows smb servers (and have tried fixing permission several times).
Anyone else having this problem?

I've heard of the Windows SMB issues but not a solution.
Regarding the full screen issue(s), do you have any external displays and what resolution are you using? Maybe you have some QuickTime plugins that aren't compatible? Check /Library/Quicktime/.
Do you have another system to test with?
What version of iPhoto? (X.y.z version format)
If you have switchable graphics in the Energy Saver, try switching and logging out. If you haven't restarted, try that. Full screen videos in your browser may be Flash. See if there's a later Flash plug-in from Adobe.
Good Luck!

Final Cut 7 Full screen problem

Hello everyone, I recently installed snow leopard, and final cut studio 3, on a 3.2 dual quad core machine, it has 16gigs of ram and internal raid controller. for graphics card I am using quadro fx 5600.
I have 2 screen configuration.
I've had the following problem after the installation. When I play something from final cut on my second display (which is in full screen mode), it seems that video is lagging or something like that, image appears that its being scanned or something, its more apparent on the action scenes, where it more camera movement. It has been very annoying, and I am sure its not a bit rate issue, all I am trying to play is a prores LT file, and outside the final cut (in QT for ex) everything plays very smooth.
Maybe there is someone who had similliar problem, please people I am in need badly.

check the system prefs and adjust the settings up or down, see what happens. You don't mention the type of monitor so it's hard to know where the controls are but after an OS upgrade it's possible the settings got changed. Try reducing the number of colors, try changing the scanning freq, try changing the resolution. Try updating the driver for your card, too, might be a new one for Snow Leopard.
bogiesan

LR 5.2 full screen problem

I use LR in Full Screen mode. When I press the F key to get Full Screen Preview, and then press the F key again, LR 5.2 reverts to regular Full Screen, as expected. However, if I exit Full Screen Preview by pressing Esc, G, E, or D, it reverts to a non-full-screen window, and I have to press shift + F two times to get back to full screen.
Before 5.2., it did not work like this. All methods to exit Full Screen Preview reverted to whatever screen mode was active when FSP was invoked.

This problem has been reported in the feedback forum: http://feedback.photoshop.com/photoshop_family/topics/5_2_update_adds_bug_to_exiting_full_ screen_preview_mode

8.1 full screen problems landscape

Similar Messages

Maybe you are looking for