8.1 sp2/3

When is 8.1 sp2 and sp3 planned to be out around? doesn't have to be exact
dates.
Thanks

Will 8.1 sp3 be J2EE 1.4 compliant? Or will WebLogic 9 be release before that?
Eric Ma
"Mark Griffith" <[email protected]> wrote:
Sp2 is sometime before Christmas. Very soon. Sp3 is a ways away, like
2004, and no real idea (sorry) I would say 4 months at least any maybe
summer.
cheers
mbg
"bob" <[email protected]> wrote in message news:[email protected]..
When is 8.1 sp2 and sp3 planned to be out around? doesn't have to beexact
dates.
Thanks

Similar Messages

Tecra M9-136 - BSOD during Vista SP2 update

Tecra M9-136 asked this morning to update to Vista SP2 and during the process the BSOD 0x0000007E arrived. Restarted in Safe Mode and the installer continued and then finally reported that the update had failed - and reverted to SP1. This took most of the morning.
It will start in Safe Mode but on a normal boot-up, Vista SP1 gets through the fingerprint recognition and then fails with the same BSOD (it doesn't get as far as displaying the desktop).
The laptop has BIOS level 1.80. I've tried in Safe mode to install 1.90 but it tells me that the battery has insufficient charge and the power adapter isn't attached. Both untrue.
Stuck - need advice. Could this be a hard fault? Can't see how I can update anything if it's a soft fault.
thanks

The message with the BSOD mentioned checking BIOS and driver versions. Anyway, no change made to that.,
I tried System Restore but the only available restore point was the SP2 installation. I thought Vista was supposed to save a restore point every 24 hours even if nothing new had been installed.
I've now found in System Information / Windows Error Reporting several messages like this:
28/09/2009 12:08 Windows Error Reporting Fault bucket 0x7E_NULL_IP_DRVNDDM+57bd, type 0
Event Name: BlueScreen
Response: None
Cab Id: 0

Problem signature:
P1: 
P2: 
P3: 
P4: 
P5: 
P6: 
P7: 
P8: 
P9: 
P10: 

Attached files:
C:\Windows\Minidump\Mini0928 09-04.dmp
C:\Users\me\AppData\Local\Te mp\WER-75660-0.sysdata.xml
C:\Users\me\AppData\L ocal\Temp\WER7D78.tmp.version.txt
& #x000d;
These files may be available here:
C:\Users\me\AppData\Local\Mic rosoft\Windows\WER\ReportArchive\Report06d1c4b5

Sharepoint Foundation 2010 SP2 or SharePoint Foundation 2013

Experts,
I am installing FIM 2010 R2 SP1 on windows 2012.
FIM Sync installed on server1.
FIM Service installed on server2.
Now I have to install:-
FIM Portal on server3.
With googling I understand that I need SharePoint Foundation 2013 or SharePoint Foundation 2010 SP2.
Can anyone guide what would be the safe approach. I don't have any knowledge of SharePoint.
Please suggest.
Thanks,
Mann

Considering you would use it for FIM only, it doesn't really matter which version would you pick.
If you want to implement FIM on Windows Server 2012 (or R2), just make sure that you install correct version of SharePoint (at least 2010 SP2)
Keep trying If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Error While Creating Windows Server 2008 SP2 32-BIT Virtual Machine

I am facing an error while creating a Virtual Machine on the Cloud. The Error is below:
Error (610)
Virtual Machine Manager was unable to find a value for the required Sysprep parameter ProductKey.
Recommended Action
Add the missing Sysprep parameter either to the answer file or to the operating system configuration, and then try the operation again.
My Template does not have the Product Key defined. The OS is Windows Server 2008 SP2 32-BIT. Is defining Product Key absolutely necessary? I have other Templates for other Operating Systems and they are working fine. Only facing problem
with this.
Any help would be appreciated.

In the SCVMM world a 'template' is composed of the following: a VHD with an OS that has been generalized (sysprep), virtual hardware profile (settings), and an OS profile.
The OS profile is required to have a product key. A MAC activation key at the minimum. But the key is required.
If you deploy a VM from a VHD, the same customization assumptions are not at play. Which is why it succeeds. (there is no template in this case, there is also no requirement that the OS in the VHD be sysprep'd).
SCVMM has rules. And lots of things don't make sense until you begin to understand them and play within them. (I am not saying that the SCVMM rules are a good thing, just saying they exist)
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Error while installing SQL Server 2012 X64 SP2,

Error while installing SQL Server 2012 X64 SP2,
When I installed the SQL Server 2012 X64 SP1, I got the attached error.
What might be the issue here?
Thank you
Best
Jamal

Hello,
Are you trying to install SQL Server on a compressed or encrypted drive? SQL Server won’t install on a drive/folder with these attributes.
Are you trying to install SQL Server on a ReFS file system? It is not supported on SQL Server 2012.
Disable any security/antivirus software and download the media again. Mount the media (.ISO file) and try to install again.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

No wireless access with Windows XP Pro (SP2) on Macbook Pro

Hello,
Just installed Windows XP Pro (SP2) on my new Macbook Pro using Bootcamp Beta. The installation has gone fine with the exception of wireless access to the internet through my Airport home network.
I've tried all the other configuraton wizards on XP...no joy.
The three other macs in the house (2 wireless, 1 ethernet) and one Windows laptop (wireless) are all fine and dandy.
Any suggestions on what to do?
Thanks
17 and 15 Powerbooks, iMac
17 and 15 Powerbooks, iMac

Right Click on My Computer
Select Manage
Click on Device Manager
Make sure that your Ethernet Adapters are working properly
If there is an red X or a yellow ! next to any ethernet adapter then try to reinstall the drivers.
(you can reinstall the drivers via the installation cd or double click on the hardware device under device manager. there should be a reinstall drivers button in there. point it to the CD that you burned from bootcamp)
(there will be a couple of devices that are not working properly.)
MacBook Pro Mac OS X (10.4.8)

Error in installing CC&B 2.3.1 SP2

Hi,
I have CC&B 2.3.1 SP1 in my windows machine with Tomcat Server. I am trying to install SP2 but getting some error if i select some person or something in the control central. Installation didn't show up any error and server is staring up fine. Problem is CC&B is not loading any account or premise or any entity
for example, I am getting below error if i select any account. SP1 was working fine and tried to install SP2 twice but same issue. Has anyone successfully installed SP2 in Tomcat ? Any suggestions would surely help. Thanks
SYSUSER - 921196-109-1 2011-08-05 16:28:56,683 [http-6500-5] ERROR (cobol.host.OptimizedRemoteExecuterStub) An exception occurred invoking remote command.
- 2011-08-05 16:28:56,684 [Log4j Socket Handler] INFO (log4j.net.SocketNode) Caught java.net.SocketException closing conneciton.
SYSUSER - 921196-109-1 2011-08-05 16:28:56,684 [http-6500-5] INFO (cobol.host.RemoteJVMConnectionImpl) Connection to JVM 3 being shunned
SYSUSER - 921196-109-1 2011-08-05 16:28:56,684 [http-6500-5] ERROR (cobol.host.RemoteJVMConnectionImpl) An exception has occurred calling the remote JVM
SYSUSER - 921196-109-1 2011-08-05 16:28:56,684 [http-6500-5] ERROR (support.cobol.AbstractCobolProgram) An exception occurred calling cobol program CIPCACCP
SYSUSER - 921196-109-1 2011-08-05 16:28:56,686 [http-6500-5] ERROR (api.service.ServiceExecutionPolicy) Rollback: Read failed
SYSUSER - 921196-109-1 2011-08-05 16:28:56,686 [http-6500-5] ERROR (support.context.SessionExecutable) Caught exception from SessionExecutable.execute()
SYSUSER - 921196-109-1 2011-08-05 16:28:56,687 [http-6500-5] ERROR (web.dataservlet.PageRead) Unexpected error.
com.splwg.base.support.cobol.host.InputClosedException:
The following stacked messages were reported as the LoggedException was rethrown:
com.splwg.base.api.service.ServiceDispatcher$13.execute(ServiceDispatcher.java:552): Caught exception from SessionExecutable.execute()
com.splwg.base.support.cobol.ServiceAdapter.invokePageService(ServiceAdapter.java:76): Rollback: Read failed
com.splwg.base.support.cobol.host.CommandRunnerHolder.invoke(CommandRunnerHolder.java:31): An exception occurred calling cobol program CIPCACCP
com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.sendRequestGetResponse(OptimizedRemoteExecuterStub.java:83): An exception has occurred calling the remote JVM
com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.sendRequestGetResponse(OptimizedRemoteExecuterStub.java:83): An exception occurred invoking remote command.
The root LoggedException was: The input was closed.
     at com.splwg.base.support.cobol.host.OptimizedObjectEncoder.readOptimized(OptimizedObjectEncoder.java:176)
     at com.splwg.base.support.cobol.host.OptimizedDataInput.readOptimized(OptimizedDataInput.java:41)
     at com.splwg.base.support.cobol.host.OptimizedObjectEncoder.readSerializable(OptimizedObjectEncoder.java:245)
     at com.splwg.base.support.cobol.host.OptimizedDataInput.readSerializable(OptimizedDataInput.java:49)
     at com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.sendRequestGetResponse(OptimizedRemoteExecuterStub.java:83)
     at com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.invoke(OptimizedRemoteExecuterStub.java:58)
     at com.splwg.base.support.cobol.host.RemoteRunnerImpl.invoke(RemoteRunnerImpl.java:111)
     at com.splwg.base.support.cobol.host.CommandRunnerHolder.invoke(CommandRunnerHolder.java:31)
     at com.splwg.base.support.cobol.AbstractCobolProgram$CallCobolClosure.run(AbstractCobolProgram.java:195)
     at com.splwg.base.support.interception.SessionInterceptionManager.notifyGenericCallStackJump(SessionInterceptionManager.java:268)
     at com.splwg.base.support.context.FrameworkSession.notifyGenericCallStackJump(FrameworkSession.java:1473)
     at com.splwg.base.support.cobol.AbstractCobolProgram$1.run(AbstractCobolProgram.java:115)
     at com.splwg.base.support.cobol.AbstractCobolProgram.callCobol(AbstractCobolProgram.java:125)
     at com.splwg.base.support.cobol.GenericCobolServiceProgram.callCobol(GenericCobolServiceProgram.java:64)
     at com.splwg.base.support.cobol.ServiceAdapter.invokePageService(ServiceAdapter.java:76)
     at com.splwg.base.support.service.cobol.CobolPageRereadHelper.read(CobolPageRereadHelper.java:34)
     at com.splwg.base.support.service.cobol.CobolPageReadService.read(CobolPageReadService.java:17)
     at com.splwg.base.support.service.PageReadService.privateExecute(PageReadService.java:56)
     at com.splwg.base.support.service.PageReadService.execute(PageReadService.java:39)
     at com.splwg.base.api.service.ServiceDispatcher.readItemInSession(ServiceDispatcher.java:627)
     at com.splwg.base.api.service.ServiceDispatcher$13.execute(ServiceDispatcher.java:553)
     at com.splwg.base.api.service.ServiceDispatcher$13.execute(ServiceDispatcher.java:552)
     at com.splwg.base.support.context.SessionExecutable.doInNewSession(SessionExecutable.java:39)
     at com.splwg.base.api.service.ServiceDispatcher.doInAppropriateSession(ServiceDispatcher.java:608)
     at com.splwg.base.api.service.ServiceDispatcher.readItem(ServiceDispatcher.java:558)
     at com.splwg.base.api.service.ServiceDispatcher.readItem(ServiceDispatcher.java:538)
     at com.splwg.serviceclient.LocalServiceDispatcher.read(LocalServiceDispatcher.java:129)
     at com.splwg.base.web.dataservlet.PageRead.service(PageRead.java:52)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.splwg.base.web.services.RequestContextFilter.doFilter(RequestContextFilter.java:50)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.splwg.base.web.utility.CompressionFilter.doFilter(CompressionFilter.java:46)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
     at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:525)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:261)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:581)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.io.EOFException
     at java.io.DataInputStream.readByte(DataInputStream.java:243)
     at com.splwg.base.support.cobol.host.OptimizedObjectEncoder.readOptimized(OptimizedObjectEncoder.java:75)
     ... 47 more
- 2011-08-05 16:28:56,776 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) Load error : file 'CIPCACCR'
- 2011-08-05 16:28:56,877 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) error code: 173, pc=0, call=1, seg=0
- 2011-08-05 16:28:56,978 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger) 173 Called program file not found in drive/directory
- 2011-08-05 16:28:57,079 [JVM 3 ERROR logger] ERROR (cobol.host.ProcessLogger)
- 2011-08-05 16:28:57,246 [JVM 5 INFO logger] INFO (cobol.host.ProcessLogger) Remote JVM 5 started with arguments: 5 6505 6506 2
- 2011-08-05 16:28:57,347 [JVM 5 INFO logger] INFO (cobol.host.ProcessLogger) INFO: Loaded spl.properties from classpath: {spl.runtime.cobol.sql.cursoredCache.maxRows=10, spl.tools.loaded.applications=base,ccb,cm, spl.runtime.cobol.sql.disableQueryCache=false, spl.runtime.utf8Database=true, spl.runtime.fusionlook=true, spl.runtime.cobol.encoding=UTF8, spl.runtime.cobol.sql.cache.maxTotalEntries=1000, spl.runtime.cobol.cobrcall=false, spl.runtime.cobol.sql.fetchSize=150, spl.runtime.environ.init.dir=C:/spl/CCB23/etc, spl.runtime.sql.highValue=?, spl.runtime.service.extraInstallationServices=CILTINCP, spl.runtime.oracle.statementCacheSize=300}
- 2011-08-05 16:28:57,448 [JVM 5 INFO logger] INFO (cobol.host.ProcessLogger) - 2011-08-05 16:28:57,367 [Remote JVM:5 Main ] INFO (cobol.host.SocketStrategy) Socket strategy set to com.splwg.base.support.cobol.host.sockets.WindowsPipeSocketStrategy
- 2011-08-05 16:28:57,549 [JVM 5 INFO logger] INFO (cobol.host.ProcessLogger) Remote JVM 5 listening for requests on port: 6506
- 2011-08-05 16:28:58,094 [JVM 5 INFO logger] INFO (cobol.host.ProcessLogger) - 2011-08-05 16:28:58,094 [Remote JVM:5 Thread 1] INFO (cobol.host.CIPZMEMJ) CIPZMEMJ initialized successfully.
- 2011-08-05 16:28:58,195 [JVM 5 INFO logger] INFO (cobol.host.ProcessLogger) INFO: Loaded spl.properties from classpath: {spl.runtime.cobol.sql.cursoredCache.maxRows=10, spl.tools.loaded.applications=base,ccb,cm, spl.runtime.cobol.sql.disableQueryCache=false, spl.runtime.utf8Database=true, spl.runtime.fusionlook=true, spl.runtime.cobol.encoding=UTF8, spl.runtime.cobol.sql.cache.maxTotalEntries=1000, spl.runtime.cobol.cobrcall=false, spl.runtime.cobol.sql.fetchSize=150, spl.runtime.environ.init.dir=C:/spl/CCB23/etc, spl.runtime.sql.highValue=?, spl.runtime.service.extraInstallationServices=CILTINCP, spl.runtime.oracle.statementCacheSize=300}
- 2011-08-05 16:28:58,296 [JVM 5 INFO logger] INFO (cobol.host.ProcessLogger) INFO: Loaded log4j.properties from classpath: {log4j.logger.org.hibernate.type=debug, log4j.appender.A1.layout.ConversionPattern=%X{userId} - %X{transactionId} %d [%t] %-5p (%c{3}) %m%n, log4j.appender.A1.encoding=UTF-8, log4j.logger.spl.org.hibernate.SQL=info, log4j.logger.com.splwg=info, log4j.logger.spl.org.hibernate.type=info, log4j.logger.org.hibernate=info, log4j.logger.spl.com.splwg.base.support.hibernatetypes=info, log4j.appender.A1=org.apache.log4j.ConsoleAppender, log4j.appender.A1.layout=org.apache.log4j.PatternLayout, log4j.logger.org.hibernate.SQL=debug, log4j.logger.org.hibernate.cfg=warn, log4j.logger.com.splwg.base.support.hibernatetypes=debug, log4j.rootCategory=info, A1}
- 2011-08-05 16:28:58,302 [Log4j Connection Listener] INFO (cobol.host.LocalLogServer) Connected to client at /10.143.9.188
- 2011-08-05 16:28:58,305 [pool-2-thread-1] INFO (cobol.host.RotatingCommandRunnerProvider) All inflight requests have returned for JVM 3. Shutting it down.
- 2011-08-05 16:28:58,381 [Remote JVM:5 Main ] INFO (cobol.host.RemoteJVM) Remote JVM 5 setup complete
- 2011-08-05 16:28:59,306 [pool-2-thread-1] INFO (cobol.host.ProcessLogger) Shutting down JVM 3 INFO logger
- 2011-08-05 16:28:59,306 [pool-2-thread-1] INFO (cobol.host.ProcessLogger) Shutting down JVM 3 ERROR logger

hi
I face a similar issue as u faced . Please let me know the solution .
Error in Log file : When trying to switch language.
ZOHAIB - 169696-23-1 2012-01-09 15:23:22,624 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR (web.dataservlet.PageChange) Unexpected error.
com.splwg.base.support.cobol.host.InputClosedException:
The following stacked messages were reported as the LoggedException was rethrown:
com.splwg.base.api.service.ServiceDispatcher$5.execute(ServiceDispatcher.java:248): Caught exception from SessionExecutable.execute()
com.splwg.base.support.pagemaintenance.AbstractPageMaintenance.changeItem(AbstractPageMaintenance.java:134): Rollback: Change failed
com.splwg.base.support.cobol.host.CommandRunnerHolder.invoke(CommandRunnerHolder.java:31): An exception occurred calling cobol program CIPZDATA
com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.sendRequestGetResponse(OptimizedRemoteExecuterStub.java:83): An exception has occurred calling the remote JVM
com.splwg.base.support.cobol.host.OptimizedRemoteExecuterStub.sendRequestGetResponse(OptimizedRemoteExecuterStub.java:83): An exception occurred invoking remote command.

EP5.0 Custom .par File Does Not Work in EP6.0 SP2

I have a .par file called CustomerSearch.par that is used in EP5.0, and I am now trying to get this .par file to work in EP6.0 SP2. I noticed the directory structure changes, so my .par structure is this:
CustomerSearch.par
--> portal-inf
portalapp.xml
lib
CustomerSearch.jar
TableViewExample.class
pagelet
TableView.jsp
I am getting the following error in the portal console logs when I try to access the component after I have uploaded the CustomerSearch.par file. Does anyone have any suggestions?
Error Message
Jan 26, 2005 4:23:50 PM # Client_Thread_34 Fatal Exception ID:04:23_26/01/05_0019
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Resource
Component : CustomerSearch.TableViewExample
Component class : TableViewExample
User : testUser
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:858)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:389)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:462)
at com.sapportals.portal.prt.component.AbstractComponentResponse.include(AbstractComponentResponse.java:88)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:226)
at com.sapportals.portal.htmlb.page.JSPDynPage.doOutput(JSPDynPage.java:76)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:109)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:135)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:209)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:576)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:669)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:208)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:833)
at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:665)
at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:312)
at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1229)
at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
Caused by: com.sapportals.portal.prt.component.PortalComponentException: PortalComponentException
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:123)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:224)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:86)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:338)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:817)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:385)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:462)
at com.sapportals.portal.prt.component.AbstractComponentResponse.include(AbstractComponentResponse.java:88)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:226)
at com.sapportals.portal.htmlb.page.JSPDynPage.doOutput(JSPDynPage.java:76)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:109)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:135)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:209)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:576)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:669)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:208)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:833)
at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:665)
at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:312)
at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1229)
at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
Caused by: com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: D:/usr/sap/EPD1/j2ee/j2ee_22/cluster/server/services/servlet_jsp/work/jspTemp/irj/root/WEB-INF/portal/portalapps/CustomerSearch/work/pagelet/_sapportalsjsp_TableView.java:39: cannot resolve symbol
symbol : class MyBean
location: package TableViewExample
TableViewExample.MyBean myBeanName = null;
^
D:/usr/sap/EPD1/j2ee/j2ee_22/cluster/server/services/servlet_jsp/work/jspTemp/irj/root/WEB-INF/portal/portalapps/CustomerSearch/work/pagelet/_sapportalsjsp_TableView.java:41: cannot resolve symbol
symbol : class MyBean
location: package TableViewExample
myBeanName = (TableViewExample.MyBean)pageContext.getAttribute("myBeanName", PageContext.APPLICATION_SCOPE);
^
D:/usr/sap/EPD1/j2ee/j2ee_22/cluster/server/services/servlet_jsp/work/jspTemp/irj/root/WEB-INF/portal/portalapps/CustomerSearch/work/pagelet/_sapportalsjsp_TableView.java:45: cannot resolve symbol
symbol : class MyBean
location: package TableViewExample
myBeanName = (TableViewExample.MyBean) Beans.instantiate(this.getClass().getClassLoader(), "TableViewExample.MyBean");
^
3 errors
at com.sapportals.portal.prt.servlets_jsp.server.compiler.JavaCompiler.compileExternal(JavaCompiler.java:439)
at com.sapportals.portal.prt.servlets_jsp.server.compiler.JavaCompiler.compile(JavaCompiler.java:539)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2140)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:76)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:118)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:224)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:86)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:338)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:817)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:385)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:462)
at com.sapportals.portal.prt.component.AbstractComponentResponse.include(AbstractComponentResponse.java:88)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:226)
at com.sapportals.portal.htmlb.page.JSPDynPage.doOutput(JSPDynPage.java:76)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:109)
at com.sapportals.portal.htmlb.page.PageProcessorComponent.doContent(PageProcessorComponent.java:135)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:209)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:576)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:300)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:138)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:190)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:669)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:208)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:833)
at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:665)
at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:312)
at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1229)
at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
[email protected]7 #
TableViewExample.java Code
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.ResultSetMetaData;
import java.sql.SQLException;
import java.sql.Statement;
import java.util.Vector;
import com.sapportals.htmlb.InputField;
import com.sapportals.htmlb.event.Event;
import com.sapportals.htmlb.event.TableNavigationEvent;
import com.sapportals.htmlb.page.DynPage;
import com.sapportals.htmlb.page.PageException;
import com.sapportals.htmlb.table.DefaultTableViewModel;
import com.sapportals.htmlb.table.TableView;
import com.sapportals.htmlb.table.TableViewModel;
import com.sapportals.portal.htmlb.page.JSPDynPage;
import com.sapportals.portal.htmlb.page.PageProcessorComponent;
import com.sapportals.portal.prt.component.*;
public class TableViewExample extends PageProcessorComponent
     /* (non-Javadoc)
@see com.sapportals.portal.htmlb.page.PageProcessorComponent#getPage()
     public DynPage getPage()
          return new MyDynPage();
     public class MyDynPage extends JSPDynPage
          //variables
          private int visibleRow = 1;
          public String search;
          public String state = "0";
          MyBean myBean;
          /* (non-Javadoc)
@see com.sapportals.htmlb.page.DynPage#doInitialization()
          //Get Context and Initialize Bean
          public void doInitialization() throws PageException
               IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
               IPortalComponentContext myContext = request.getComponentContext();
               IPortalComponentProfile myProfile = myContext.getProfile();
               IPortalComponentProfile userProfile = request.getComponentContext().getProfile();
               MyBean myBean = new MyBean();
               myBean.setText("");
               myProfile.putValue("myBeanName", myBean);
          /* (non-Javadoc)
@see com.sapportals.htmlb.page.DynPage#doProcessAfterInput()
           //Called Directly After The Data Was Submitted
          public void doProcessAfterInput() throws PageException
               //Get the Bean Object
               IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
               IPortalComponentContext context = request.getComponentContext();
               IPortalComponentProfile profile = context.getProfile();
               //Get the Account Info Input Field
               InputField myInputField = (InputField) getComponentByName("account_input");
               if( myInputField != null )
                    search = myInputField.getValueAsDataType().toString();
               myBean = (MyBean) profile.getValue("myBeanName");
               myBean.setAccount(search);
               myBean.MyBeanModel();
               state = myBean.state;
               if( state == "1" )
                    //get the selected row / rows
                    //get the tableView by getComponentByName
                    TableView table = (TableView) this.getComponentByName("myTableView");
                    //Get the first visible row
                    int firstVisibleRow = table.getVisibleFirstRow();
                    //Get the last visible row
                    int lastVisibleRow = table.getVisibleLastRow();
                    //which of the visible rows was selected
                    StringBuffer strBuff = new StringBuffer();
                    for( int i = firstVisibleRow; i <= lastVisibleRow; i++ )
                         if( table.isRowSelected(i) )
                              strBuff.append("Row: " + i + " : ");
          /* (non-Javadoc)
@see com.sapportals.htmlb.page.DynPage#doProcessBeforeOutput()
          //Called Directly Before Output - Last Called Function
          public void doProcessBeforeOutput() throws PageException
               //set the jsp to load
               this.setJspName("TableView.jsp");
          //Called If The Navigation Event Was Send
          //The JSP has set the navigation mode byline so the user can navigate
          //line by line, page up and down, first and last entry
          public void onNavigation(Event event)
               if( state == "1" )
                    //Navigation - get the event to recover the actual position
                    TableNavigationEvent tne = (TableNavigationEvent) event;
                    //With the event the method getFirstVariableRowAfter() can be used
                    //which gives the acutal position (after the event)
                    this.visibleRow = tne.getFirstVisibleRowAfter();
                    if( myBean != null )
                         //just for the first time, when there is no bean
                         //set the new visibleRow
                         myBean.setVisibleRow(new Integer(this.visibleRow).toString());
          public void onSendButtonClicked(Event event) throws PageException
               IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
               IPortalComponentContext context = request.getComponentContext();
               IPortalComponentProfile myProfile = context.getProfile();
               IPortalComponentProfile userProfile = request.getComponentContext().getProfile();
               myBean = (MyBean) myProfile.getValue("myBeanName");
               state = "1";
               myBean.setState("1");
               myProfile.putValue("myBeanName", myBean);
     public class MyBean
          //Properties
          public DefaultTableViewModel model;
          private String visibleRow = "1";
          private String text;
          private String account;
          private String state = "0";
          private String searchType;
          //get/set account
          public void setAccount(String account)
               this.account = account;
          public String getAccount()
               return this.account;
          //get/set state
          public void setState(String state)
               this.state = state;
          public String getState()
               return this.state;
          //get/set model
          public void setModel(DefaultTableViewModel model)
               this.model = model;
          public TableViewModel getModel()
               return this.model;
          //get/set Text for status messages
          public void setText(String text)
               this.text = text;
          public String getText()
               return this.text;
          //get/set VisibleRow for tableView
          public void setVisibleRow(String visibleRow)
               this.visibleRow = visibleRow;
          public String getVisibleRow()
               return this.visibleRow;
          //get/set SearchType
          public void setSearchType(String searchType)
               this.searchType = searchType;
          public String getSearchType()
               return this.searchType;
          //Create Table View Model
          public void MyBeanModel()
               model = this.createNewTable(model);
               //Set Table Text
               if( model.getRowCount() > 0 )
                    this.setText("Customer Information Found For: " + this.getSearchType());
               else
                    this.setText("No Records Found For Account: " + this.getAccount());
          //Create Data For A DefaultTableViewModel By Using Vector
          private DefaultTableViewModel createNewTable(DefaultTableViewModel model)
               //Get a vector with a filled up data array
               Vector data = null;
               try
                    data = doGet();
               catch( ClassNotFoundException e )
                    e.printStackTrace();
               //Get a new vector for the titles
               Vector colName = new Vector();
               colName.addElement("NUMBER");
               colName.addElement("CUSTOMER NAME");
               colName.addElement("PHONE");
               colName.addElement("STREET");
               colName.addElement("CITY");
               colName.addElement("STATE");
               colName.addElement("ZIP");
               model = new DefaultTableViewModel(data, colName);
               return model;
          //Method will execute SQL string with search parameter on the database
          public Vector doGet() throws ClassNotFoundException
               Statement stmt = null;
               Vector myVector = new Vector();
               try
                    //Load the sun jdbc-odbc bridge driver
                    DriverManager.registerDriver (new oracle.jdbc.OracleDriver());
                    String dbUrl = "jdbc:oracle:oci8:@testX003";
                    Connection con = DriverManager.getConnection(dbUrl, "test", "test");
                    //Create a statement to submit SQL statements to the driver
                    stmt = con.createStatement();
                    String query = "select PAYER_NUM, PAYER_CUST_NAME, PAYER_PHONE_NUM_1 " +
                                      "PAYER_STR_ADDR, PAYER_CITY_NAME, PAYER_ST_ABBR, PAYER_ZIP_CD " +
                                      "from CUST_PAYER where PAYER_NUM = " + this.getAccount() + "";
                    this.setSearchType("Payer Search");
                    ResultSet rs;
                    rs = stmt.executeQuery(query);
                    ResultSetMetaData rsmd = rs.getMetaData();
                    //Get number of columns
                    int numCols = rsmd.getColumnCount();
                    if( numCols == 0 )
                         query = "select SLDTO_NUM, SLDTO_CUST_NAME, SLDTO_PHONE_NUM_1 " +
                                   "SLDTO_STR_ADDR, SLDTO_CITY_NAME, SLDTO_ST_ABBR, SLDTO_ZIP_CD " +
                                   "from CUST_PAYER where SLDTO_NUM = " + this.getAccount() + "";
                         this.setSearchType("SoldTo Search");
                         rs = stmt.executeQuery(query);
                    myVector = createData(rs);
                    //Close ResultSet
                    rs.close();
                    //Close Statement
                    stmt.close();
                    //Close Connection
                    con.close();
               catch( SQLException ex)
                    this.account = ex.getMessage();
               return myVector;
          //This method pulls the database selection results and places them into vectors
          private Vector createData(ResultSet res) throws SQLException
               //Get the metadata infro
               ResultSetMetaData rsmd = res.getMetaData();
               //Get number of columns
               int numCols = rsmd.getColumnCount();
               String checkVal;
               //Loop through the result set and load rows of data into Vector
               Vector dataVec = new Vector();
               Vector retVector = new Vector();
               int k = 0;
               while( res.next() )
                    k++;
                    for( int i = 1; i

Hi Bernhard,
nice to hear that we resolve the problem
> Karstens answer solved my base problem,
> Detlevs answer lead into the right direction.
Not that I've that need for points...
It's just the question why my answer (if you follow the link, my answer was: delete two lines, from which one is essential to be deleted) only "lead into the right direction"... In fact, it solved the base problem, I would claim for me
To give the technical background: If your write
<property name="ComponentType" value="jspnative"/>
the portal runtime expects a component consisting of a native JSP; the second directive -
<property name="JSP" value="pagelet/InitialPage.jsp"/>
- for this case tells where to find this JSP. So if you delete the first line, <i>at least</i> the second line has no sense anymore. To clean up such a portalapp.xml, it just makes sense also to delete the second line.
Best regards
Detlev

Can not connect to oracle10g release2 database On XP SP2. Help needed

Hi! friends!
I have used Oracle 8 and it was nice. I didn't run Oracle 9i.
Now I installed Oracle10g R2 in WinXP-SP2. There was no problem in installation. But i can't run it. I get the Black SQL screen. But if i give some command it says "Not connected to database".
Oracle 8 version had built in database "emp" and "sal". In start up username and password box used to come(scott/tiger). But here I don't know if there is any builtin database,even there is no place to input username/password. So i cant work with 10g.
So i can't give command like Oracle 8
select *
from emp;
I do not have any network in my Desktop PC.. pls help me how to run and test Oracle 10g database on my machine. Also tell the name of the built in database.
I am much in trouble.
I am wishing thanks in advance to all who will reply.
Regards
Abir Atarthy
[email protected]

In 10g database
During installation is you choose "database creation" option then default database is created.
database name is "ORCL"
you can check in windows registry
On command prompt
cmd>net start
if it is showing "OracleServiceORCL" then database is created"scott/tiger user is also created but in 10g it is LOCKED by default.
so you have to first unlock this user.
Now you can connect with "sys"or "system" but you know their password.
in 10g there is no default password for sys or system, we have to mention during installation time.
if you don't know then you can connect with sys like "SQL> CONN / AS SYSDBA" to sqlplus.

No audio device installed after windows vista sp2 update

Ok I will try to be as thorough as possible because I want to fix this problem and I hope somebody can help me.
So A few days ago There was an update for my audio driver so I accepted.
But after this update my sound worked but on next use the sound was gone.
So......I used system restore but no help the same thing happened
I went to the hp website to look up my audio driver for my model which was conexant audio 221
After download the driver wouldnt let me install it. I go to check in device manger to install it manually and the sound section is gone literally so i cant reformat or reinstall or anything 0.0
Somebody told me I need to upgrade to windows vista x64 sp2 which was in windows update.
So i tried it and still the same crap
I cant install the sound driver because there is no place in the device manager to install it to
I just get a message saying device installation failed device not found
i dont know what to do
My laptop is a hp dv2700 special edition notebook
Ive had it for a year no problems and this is the first major problem I've had ..............HELP
Past audio driver was conexant : Conexant High-Definition SmartAudio 221 Driver
Ive tried reading through support forums but you have to understand THE SOUND VIDEO GAME CONTROLS SECTION IN DEVICE MANAGER IS GONE
when i go into the programs I find my audio devices which are conexant hd audio and conexant hd audio soft fax modem with smart cp but when I click on them nothing happens

hi, im also exp. the same <text deleted> problem! i also get that error message "quick touch on screen display has stopped working" , lower right corner(volume icon)says"no audio output device is installed", no "video,sound & controllers" on device manager, i had tried reformatting, multible virus\malware scanners, ive tried multible registry cleaners, DL updated drivers, bios, audio(can't install,no audio device),and ive tried all of these conbinations with or without the windows updates, besides the audio prob, the cd/dvd icon's gone frm My comp, cant use the mic, and or webcam, SMART is detecting a hard disk failure now(iminent 2 fail) <text deleted> !,lol... ps HP or Microsoft really needs 2 take this into consideration, im tired of this, i will never buy another HP ever!! or windows!, **bleep** it if i have 2 spent another thousand dollars on a Mac,atleast ill get a much decent,"working" pc, that wontstress the **bleep** out of my mind!
Message Edited by WendyM on 08-09-2009 07:35 PM

Installation of Patch Set 9.2.0.7 on Windows XP Pro SP2 fails

When I tried to apply patch set 9.2.0.7 to my 9.2.0.5 installation on a computer with MS Windows XP Pro SP2, shortly after the selection of the target Oracle home directory the installer told me to shut down a large number of Windows processes (like RAS, RPC, etc., about 30 in total) that are not related at all to the installation.
Am I getting anything wrong? Or is this a bug (as I would suspect)?
Message was edited by:
csage

You are facing an annoying problem with Oracle installation on Windows.
It seems, some files are locked by
other processes than the Installer process.
The following workaround worked (for me):
Temporarily remove the reference to the Oracle Home at system startup
1. Rename the Oracle Home \bin directory to \bin_save
2. Reboot the system
3. Rename the bin_save directory back to bin again
4. Start patch installation again

Windows 2003 SP2 upgrade question in regards to OSS 30478

We are currently running our production system on a windows 2003 sp1 two-node cluster with SQL 2005.
I would like to get it upgraded to SP2, but I have a question on OSS note 30478.
There is a sentence in there stating:
-Special features with Service Packs for Windows Server 2003 in the cluster:
Service Pack 2: Before you import Support Package on platform x86_64, you must replace SAP resource DLL on both cluster nodes with the most current version.
Can someone elaborate on "replace SAP resources DLL on both cluster nodes"?
Does that just mean I need to upgrade the Kernel to the latest version?
It seems to be a fairly bold statement with very vague instructions. Anyways any guidance would be appreciated.

for more details see note <a href="http://service.sap.com/sap/support/notes/1043592">1043592</a>
peter

Windows XP Pro SP2 cd-rom after downgrading from Vista

Hi everybody.
I successfully downgraded my T61p from Vista to XP Pro SP2 using the downgrade cd-roms send by Lenovo.
Everything seems to work well. I downloaded all drivers. No problem.
But I recently installed a rather old software that I frequently used on my old A31p. This software (a Microsoft program !) has automatically modified some files from XP Pro without any autorization.
Once it was done, I was asked by the system to insert the original Windows XP Pro SP2 cd-rom to repair this modification.
Of course, the (Vista to XP) downgrade cd-rom set was not recognized by the Thinkpad as the original XP set.
An original cd-rom which I finally don't have !
I tried with an original XP Pro SP2 cd-rom bought a few years ago for my A31p. Unsuccessful.
Where could I find the XP Pro SP2 cd-rom corresponding to the downgraded system ?
Thanks for your help and suggestions.
Regards.
J.L.
Jean-Louis L.
Thinkpad A31p - T42p - T61p - TP Tablet

James,
thanks for your answer.
But I wrote on my first post "I tried with an original XP Pro SP2 cd-rom bought a few years ago for my A31p. Unsuccessful."
Thus, I don't see any difference between an original Microsoft Windows XP2 Pro SP2 version cd-rom and one created by burning a downloaded version of the OS. An original was not recognized, what would a copy do ?
If possible, it might be probably better to create an XP Pro SP2 cd-rom from the "Rescue and Recovery" files which were reinstalled when downgrading from Vista to XP. (I hate the word "downgrade" : while I was doing it, I had the feeling I was upgrading my Thinkpad !)
I have been using for several years (and still use) an A31p (Since 2002, 8 to 10 hours a day) and a T42p. IMHO, the T61p is the same category of "great" notebooks. Thinkpads are really the best notebooks I have ever used. I noted no significant difference between IBM and Lenovo Thinkpads.
Jean-Louis L.
Thinkpad A31p - T42p - T61p - TP Tablet

SP2, ORA-01400:

Good morning All,
While loading data, I got following messages:
SP2-0734: unknown command beginning
ORA-01400: cannot insert NULL into
What difference between SP2 and ORA?
Any help?
Thanks in advance,
~NYorker

00734, 0, "unknown command beginning \"%s...\" - rest of line ignored.\n"
// *Cause: The command entered was invalid.
// *Action: Check the syntax of the command you used for the correct
// options.
bcm@bcm-laptop:~$ oerr ora 1400
01400, 00000, "cannot insert NULL into (%s)"
// *Cause:
// *Action:different reporting facilities

Vista SP2 and Access connections requiring manual reconnect

Hi,
I'm experiencing a problem after the installation of Windows Vista SP2 on my Vista Business. After a reboot, I must always manually 1) disconnect the WLAN connection and then 2) reconnect to establish a working WLAN connection and to gain access to Internet. Before I disconnect, the WLAN connection is alive, but I cannot access any websites. Everything worked just fine before installation of SP2.
I'm running Access connections version 4.42 on Thinkpad R61. I've read that someone has had a similar problem with wired LAN and with newer version of Access connections: http://social.technet.microsoft.com/Forums/en/itprovistasp/thread/17ba267e-0bb1-4621-b81f-04afa0d806...
Does someone know how to solve this issue and make the connection to work without a manual disconnect -> reconnect step?
BR,
Miika

After some searching, I found a working solution:
http://www.darthcontinent.com/2009/05/no-internet-after-installing-vista.html
Everything works fine now.

SP2 Installation Problem on Weblogic Server 6.1SP1

hi,
i encountered a problem installing sp2 to my second server.
(Windows 2000 Advance Server with SP2, dual Xeon CPU, 3GB, 200GB.
Weblogic Server 6.1 with SP1 installed at d:\bea) x 2
installation file itself is valid. as installation at server 1 was successful. however,
when installing at server 2:
1) by double clicking on the exe - blank GUI popup appeared on screen without any
usual text (first screen that reads: welcome - the installer will guide you....).
all three buttons were there. click on the next buttons all the way would give a
title 'installation complete' without any delay. sp2 was not installed.
2) by running exe from console - GUI popup appeared normally. however, when prompted
to select bea home, selecting the default folder at d:\bea and when clicking on next
button, a popup would appear claiming that weblogic server home is not found at d:\bea.
and process discontinued.
the beahomelist is found at c:\bea, with content reading correctly as d:\bea;c:\bea;
Previous SP1 installation on server 2 about 2 months back was successful.
would appreciate for ur input. thanks a lot in advance.
rgds, keigo

I've exactly the same problem and will attempt to reinstall WebLogic 6.1
with SP3 built-in ...
"keigo" <[email protected]> wrote in message
news:[email protected]..
>
update on the progress, spoke to a BEA staff from regional office and I aminformed
that this problem was never encountered and am advised to perform freshre-installation
with wlserver6.1 with sp2 built in.
"keigo" <[email protected]> wrote:
Hi Laurent,
Thank you very much for ur reply.
My Weblogic Server is installed in D:\bea. Just like the Server 1
configuration.
And I m choosing to install SP2 into this existing home.
I am kind of worried by this as it is nearing production and I am running
into this
weird problem here.
Thanks again.
Rgds, keigo
Laurent Goldsztejn <[email protected]> wrote:
Hello Keigo,
It seems that the problem comes when your server is installed in the
directory where the beahomelist file is located. Am I correct when I
assume that the installation fails when you install the service pack 2
over the server installed in c:\bea?
Thank you,
Laurent Goldsztejn
Developer Relations Engineer
BEA Support

8.1 sp2/3

Similar Messages

Maybe you are looking for