8.8 Connection with licence Server failed

Hi Experts,
   I upgraded my database with version 8.8 . I also got the new licences for it and i imported it too at server.
Now when i try to get  connect with the server it will give the error that' connection with licence server failed'. I tried with the server name and  with server ip  in licence server selection  but it did'nt help me .
Kindly suggest some solution .
With Regards

Hi,
This following solution to use in the resolving of your problem is from SAP note :
   1. First locate the IP address as follows:
         1. Select "START"
         2. Choose "Run" and type in "command" in the "Open" field
         3. A black window appears
         4. Wait until the command "C:\>" is visible
         5. Write the word "PING" and then type in the Server name and press "Enter" and the line with your IP Address appears (it says "Reply from IP ADDRESS").
Rgds,
Edited by: jimmy michael on Dec 15, 2009 10:21 AM

Similar Messages

  • Connection with license server failed sap after upgrade to 8.8

    Hi
    I had just upgraded to 2007b pl14 to 8.8 everything done good but when I login it giving me erroer "connection with license server failed"
    I had restarted the licence server but still it same
    And my licance server option is also disable ?
    plz help me out

    Hi,
    check the below link, it will help you........
    Re: Error in Server Tools Installation
    Rgds,
    Priya

  • Connection with license server failed

    Hi, I am having problem connecting with my license server when I am using the DI Server (webservice).
    Error encountered:
    Error env:Receiver 100000001 Connection with license server failed.
    Does anyone know what is the best practice for this configuration? Thanks.
    Regards,
    Rodmann

    Hi Alvin,
    I am having the same problem on one of my development machine. I have installed DI Server and Server Tools on it.
    The license manager is working fine.
    But when I try to connect to the company object in a web application it just throws the same exception
    Error:Receiver 100000001 Connection with license server failed.
    To test the port 30000 i changed it to any thing like 1234 and it gave me message "Failed to connect to license server", changing it back to 30000 and  connect brings in all the hardware/license keys etc.
    Kindly help what you did in your case to get rid of this problem.
    Experts you support in this regard will be highly appreciated.
    Kashif

  • Connection to Licence Server fails - not authenticated

    System:
    SAP B1 2007A PL42
    SAP Client, SAP Server and SAP Service Manager are running on my local computer.
    Service Manager and Licenze Server are running.
    Try to login as manger to a client database in SAP B1.
    The login fails with error message "Connection to Licence Server is not authenticated" ("Verbindung zu Lizenz Server ist nicht authentifiziert!").
    Login to other client databases installed in the same system without any problem.
    Thank you for your help!
    Frank Romeni

    Hi Frank,
    Does the database name contain a '&' sign? If it does, could you please try restoring the database with a name that does not contain the '&' sign.
    When the database name is forwarded to the licence service in an XML format and there are certain characters which are not allowed to be in an XML: > < & ' " \                                                             
    The database name must not include such characters and this is what causes the error message you are receiving.                                                                               
    In order to solve this issue, please follow the steps below:                                                                               
    1. Detach DB, check datafile.mdf and logfile_log.log for special signs. If necessary rename.
    2. Attach it again. Make sure no special sign e.g. like "&" are used for the name of DB as well
    hope it helps,
    Regards,
    Ladislav
    SAP Business One Forum Team

  • DTW - Connection with license server failed

    I am trying to use the DTW after I upgraded from SBO2005 to SBO8.8 PL17
    I have SBO8,8 server in machine A and SQL Server in machine B. Mi license server is in machine A. When I enter to DTW (88.0.17), it only type the SQL Server ip address. There is no place to type the license server IP address. when i log in , i get the next message
    Connection Status (US)
    Connection to IP ##.##.##.## (SQL) has failed
    Error Code: -129
    Connection with license server has failed
    I can connect with SBO Client in the same machine.  I checked that the it has a profesional and addon license the superuser used in the DTW. I can also enter with SQL management studio can enter in the same machine. What is missing ?

    [http://img208.imageshack.us/img208/639/dtw.png]
    [http://img193.imageshack.us/img193/654/dtw2.png]
    [http://img408.imageshack.us/img408/2650/dtw3.png]
    [http://img691.imageshack.us/img691/6940/dtw4.png]
    [http://img33.imageshack.us/img33/9954/dtw5.png]
    [http://img808.imageshack.us/img808/5291/dtw6.png]
    [http://img827.imageshack.us/img827/9630/dtw7.png]

  • Connection to Licence Server Failed

    Hi There,
    I installed SAP B1 2005A SP01 PL22 on a vista machine succesfully but I am now unable to connect to the License Server. When I switch off the Firewall on the License Server I can connect succesfully, but unfortunately I am not allowed to switch off the firewall for other security reasons. My question now is; What do I need to add to the exeptions in Firewall settings to allow the connection to the License server? I have added the port 300000 but that doesnt do the trick. SAP B1 is in the exeptions and so is Server Manager. Does anyone know if there is a specific exeption I need to add for this? Any Help would be greatly appreciated.
    Regards,
    Wynand Cilliers.

    Hi There,
    The Firewall definately has an effect with this issue, because when I switch it off it works but when its on it doesnt. The port I added is in fact 30000. But doesnt work. Also, it doesnt have anything to do with Vista, because when I connect my XP machine I have exactly the same problem when connecting. What does SQL Browser have to do with this issue? It is started though, but doesnt have any affect.
    Wynand,

  • SQL Server Reporting services. failed to establish connection with project server. verify the url is correct.

    Dear All,
    I'm working on reporting of Project Server 2010, while configuring SQL SERVER REPORTING SERVICES faced issue after two complete days of troubleshooting along with this gone through plenty of forums, unable to figure out any solution. So finally posting on
    technet in order to find solution.
    ISSUE/PROBLEM:
    At initial configured the SQL REPORTING CONFIGURATION to sharepoint integrated database (SQL SERVER is installed on seperate machine), change the service to Domain Account and also installed sharepoint add in on server story was fine at this point. Furthur
    moving to SHAREPOINT ADMIN console and while configuring the Sharepoint Integrated Reporting continuously facing this error:
    Failed to establish connection with report server. . . . (Snapshot is attached for your further reference).
    My point of concern is that whenerver i try to open the REPORT SERVER URL on project server machine it prompts me to enter username and password but whenever i insert the domain credentails it didnt accept though it can be accesible by using the credentials
    of Local Admin of sql server machine. So i wana come to know whether its permission issue if yes then where i should mention the domain credentials.? 
    REGARDS DANISH DANIE

    Dear Paul,
    I am able to open the URL (http://psdb/ReportServer )using
    domian credential and page open with these contents
    Reporting Services Error
    The configuration parameter SharePointIntegrated is set to True but Share Point Object Model cannot be loaded
    Second,
    Configured the SPN on domain controller , performed the steps required to change the AUTHENTICATION in rsreportserver.config
    file also done the registry settings to disable the loop back settings.
    Same error still ! .... what should i do now ??? 
    REGARDS DANISH DANIE

  • My iphone 5 everytime i go into mail it comes up with - Cannot get Mail - the connection to the server failed- i then have to click ok - I am still receiving mail - it is driving me mad having to click this everytime - anybody else had the same ?

    My iphone 5 everytime i go into mail it comes up with - Cannot get Mail - the connection to the server failed- i then have to click ok - I am still receiving mail - it is driving me mad having to click this everytime - anybody else had the same problem and have found a solution - only stated happening since iPhone was updated .

    Hello there, Badboymbc.
    The following Knowledge Base article provides some steps for troubleshooting mail on your iOS device:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • TS3899 unable to receive hotmail from iphone 4s. its keep spinning with error the connection to the server failed. Some time it downloads old mails.

    I am unable to receive email from hotmail. It is spinning with checking for email message. Some time it downloads old emails and then those emails disappears and redownloads.  some times shows connection to the server failed.  From laptop there are no issues with account or email. Any ideas?

    Hi Friend,
    Look at this discussion: https://discussions.apple.com/message/20830562?ac_cid=sa123456#20830562
    You probably will think that discussion has not the same problem as you, but probably has your answer there.
    So please have a look and try those solutions.
    Hope it will be helpful

  • Sept 4, 2014 My iPhone is not connecting to the Hotmail servers. My other email accounts work on it but all the hotmail one comes up with is "The connection to the server failed". Are other people experiencing the same issues?

    Sept 4, 2014 My iPhone is not connecting to the Hotmail servers. Hotmail comes up with "The connection to the server failed". Are other people experiencing the same issues?  From: gnof51

    If your Hotmail account worked previously and it suddenly stopped and gave you that message, then it is likely a problem at th Hotmail end. Did you check the Hotmail website or contact Hotmail directly to see if they are experiencing problems?

  • Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentV

    I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation  when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
    to solve this problem.
    Initialization Failed
    The following error occurred while searching for the on-premises Exchange server:
    [win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
    $true -CurrentVersion 'Version 14.1 (Build 218.15)''.
    Thanks Vivek
    SharePoint Foundation 2010 Book
    http://www.redpipit.com

    Hi,
    Please have a look at the article below:
    Troubleshooting Exchange 2010 Management Tools startup issues
    http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
    Resolving WinRM errors and Exchange 2010 Management tools startup failures
    http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
    Besides, please run the cmdlet below:
     set-user alias -remotepowershellenabled$true
    Xiu Zhang
    TechNet Community Support

  • Hi i m using 4s and its updated but i cant configure with microsoft exchange for my gmail account. Anytime i tried to configure it the message comes connection to the server failed. Pls help me out.

    Hi i m using 4s and its updated but i cant configure with microsoft exchange for my gmail account. Anytime i tried to configure it the message comes connection to the server failed. Pls help me out.
    <Email Edited by Host>

    Discontinued by Google. Read here:
    http://googlesystem.blogspot.com/2012/12/google-sync-discontinued-for-gmail.html

  • How do i fix connection to the server failed with yahoo

    how do I fox connection to the server failed on my 1phone with yahoo

    Hi,
    You can try to right-click and '''Reset''' the key '''browser.newtab.url''' in [http://kb.mozillazine.org/About:config about:config] or '''Modify''' and enter '''about:blank'''.
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    The [https://services.addons.mozilla.org/en-US/firefox/discovery/addon/config-descriptions/ Config Descriptions] add-on adds helpful source comments in about:config.
    [https://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites New tab page]
    If the issue returns, you can try to check/change the '''Options''' for ShopAtHome in Firefox '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions''', or in the toolbat itself.
    [https://support.mozilla.org/en-US/kb/Using%20extensions%20with%20Firefox Using extensions]

  • Ipad with retina email app says "connection to the server failed".

    Ipad with retina email app says "connection to the server failed".  How to fix the app?

    Hello Layne,
    Thank you for the details of the issue you are experiencing with your email account on your iPhone.  I recommend the following article to troubleshoot this issue:
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Failed to Establish connection with SQL Server

    hi I have configured odbc settings and when i connect the sql from essbase i got the error :Failed to Establish connection with SQL Server .please hepl me on this
    and please give me step by step process for how to resolve thi issue.and give me detail step by step from starting onwards.
    appreciate your Help,
    Thank u
    Subbu.

    Steps:
    1. Test database connection from Essbase server through SQL Command. This gives you whether you are able to connect to Database from Essbase server.
    2. Create ODBC Connection: System DSN>Add>Select correct driver (Oracle in ...) >give Datasource (any name), Description (Any), TNS Service Name (user SID name), User name (Database user name)
    3. Test Connection. if successful, you can use this ODBC to get the data.
    4. Open rules file, go to FILE>Open SQL
    5. Provide Essbase server, Application, Database names
    6. Select SQL Data Source from the list (ODBC defined in step2)
    7. Enter tested SQL Query(which is tested at SQL command or "sysdate from dual" ) in select box. NOTE: Remove select word from query. You can ignore from and where clauses, all you can include in select block.
    8.Click OK/Reteive data
    Rao

Maybe you are looking for

  • Report for Number of invoice per vendor with amount

    Hi All, is there any standard SAP report we have which provide us number of invoices and amounts invoiced per vendor for a given time period. Amit.

  • Adobe Acrobat Standard 9 Change computer resolution

    How do I stop Adobe Acrobat 9 from changing the display resolution on my entire computer when I open a .pdf file?  I have scanned my computer with Symantec Cloud and Malware to no avail.  Has anyone else run into this? and if so, how did you fix it? 

  • Can I use a individual business?

    Hi. I'm Operating a business in Korea. My company employees are two people, but the only one that will use Creative Cloud. Then purchase a Individual License for commercial use is possible? And Promotion license (Photoshop CC + Lightroom 5) is possib

  • Incompatible types in assignment

    Hello everyone, I'm quite new to objective-c programming. So far, i pretty much solved everything either on my own with the documentation, and with some googling. One problem i haven't solved was how to detect a swipe on a uiscrollview, but i thought

  • Alright understand the dif between forms and designer...but

    alright understand the difference between forms and designer...but I learned forms 6i and reports 6i and want to work in the industry under designer 6i. can i do this? would going into designer 6i be difficult with forms 6i/pl/sql experience??